From 064ffc7c3939ebc9c152e17bd9f4496d7b318688 Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Wed, 20 Jan 2021 09:58:17 -0800 Subject: misc: bcm-vk: add autoload support Add support to load and boot images on card automatically. The kernel module parameter auto_load can be passed in as false to disable such support on probe. As well, nr_scratch_pages can be specified to allocate more or less scratch memory on init as needed for desired card operation. Co-developed-by: Desmond Yan Co-developed-by: James Hu Acked-by: Olof Johansson Signed-off-by: Desmond Yan Signed-off-by: James Hu Signed-off-by: Scott Branden Link: https://lore.kernel.org/r/20210120175827.14820-4-scott.branden@broadcom.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/bcm-vk/bcm_vk.h | 250 ++++++++++++++ drivers/misc/bcm-vk/bcm_vk_dev.c | 723 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 973 insertions(+) (limited to 'drivers/misc/bcm-vk') diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h index 9152785199ab..c4fb61a84e41 100644 --- a/drivers/misc/bcm-vk/bcm_vk.h +++ b/drivers/misc/bcm-vk/bcm_vk.h @@ -6,10 +6,187 @@ #ifndef BCM_VK_H #define BCM_VK_H +#include #include +#include #define DRV_MODULE_NAME "bcm-vk" +/* + * Load Image is completed in two stages: + * + * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM. + * The Secure Boot Loader (SBL) as part of the BootROM will run + * to open up ITCM for host to push BOOT1 image. + * SBL will authenticate the image before jumping to BOOT1 image. + * + * 2) Because BOOT1 image is a secured image, we also called it the + * Secure Boot Image (SBI). At second stage, SBI will initialize DDR + * and wait for host to push BOOT2 image to DDR. + * SBI will authenticate the image before jumping to BOOT2 image. + * + */ +/* Location of registers of interest in BAR0 */ + +/* Request register for Secure Boot Loader (SBL) download */ +#define BAR_CODEPUSH_SBL 0x400 +/* Start of ITCM */ +#define CODEPUSH_BOOT1_ENTRY 0x00400000 +#define CODEPUSH_MASK 0xfffff000 +#define CODEPUSH_BOOTSTART BIT(0) + +/* Boot Status register */ +#define BAR_BOOT_STATUS 0x404 + +#define SRAM_OPEN BIT(16) +#define DDR_OPEN BIT(17) + +/* Firmware loader progress status definitions */ +#define FW_LOADER_ACK_SEND_MORE_DATA BIT(18) +#define FW_LOADER_ACK_IN_PROGRESS BIT(19) +#define FW_LOADER_ACK_RCVD_ALL_DATA BIT(20) + +/* Boot1/2 is running in standalone mode */ +#define BOOT_STDALONE_RUNNING BIT(21) + +/* definitions for boot status register */ +#define BOOT_STATE_MASK (0xffffffff & \ + ~(FW_LOADER_ACK_SEND_MORE_DATA | \ + FW_LOADER_ACK_IN_PROGRESS | \ + BOOT_STDALONE_RUNNING)) + +#define BOOT_ERR_SHIFT 4 +#define BOOT_ERR_MASK (0xf << BOOT_ERR_SHIFT) +#define BOOT_PROG_MASK 0xf + +#define BROM_STATUS_NOT_RUN 0x2 +#define BROM_NOT_RUN (SRAM_OPEN | BROM_STATUS_NOT_RUN) +#define BROM_STATUS_COMPLETE 0x6 +#define BROM_RUNNING (SRAM_OPEN | BROM_STATUS_COMPLETE) +#define BOOT1_STATUS_COMPLETE 0x6 +#define BOOT1_RUNNING (DDR_OPEN | BOOT1_STATUS_COMPLETE) +#define BOOT2_STATUS_COMPLETE 0x6 +#define BOOT2_RUNNING (FW_LOADER_ACK_RCVD_ALL_DATA | \ + BOOT2_STATUS_COMPLETE) + +/* Boot request for Secure Boot Image (SBI) */ +#define BAR_CODEPUSH_SBI 0x408 +/* 64M mapped to BAR2 */ +#define CODEPUSH_BOOT2_ENTRY 0x60000000 + +#define BAR_CARD_STATUS 0x410 + +#define BAR_BOOT1_STDALONE_PROGRESS 0x420 +#define BOOT1_STDALONE_SUCCESS (BIT(13) | BIT(14)) +#define BOOT1_STDALONE_PROGRESS_MASK BOOT1_STDALONE_SUCCESS + +#define BAR_METADATA_VERSION 0x440 +#define BAR_OS_UPTIME 0x444 +#define BAR_CHIP_ID 0x448 +#define MAJOR_SOC_REV(_chip_id) (((_chip_id) >> 20) & 0xf) + +#define BAR_CARD_TEMPERATURE 0x45c + +#define BAR_CARD_VOLTAGE 0x460 + +#define BAR_CARD_ERR_LOG 0x464 + +#define BAR_CARD_ERR_MEM 0x468 + +#define BAR_CARD_PWR_AND_THRE 0x46c + +#define BAR_CARD_STATIC_INFO 0x470 + +#define BAR_INTF_VER 0x47c +#define BAR_INTF_VER_MAJOR_SHIFT 16 +#define BAR_INTF_VER_MASK 0xffff +/* + * major and minor semantic version numbers supported + * Please update as required on interface changes + */ +#define SEMANTIC_MAJOR 1 +#define SEMANTIC_MINOR 0 + +/* + * first door bell reg, ie for queue = 0. Only need the first one, as + * we will use the queue number to derive the others + */ +#define VK_BAR0_REGSEG_DB_BASE 0x484 +#define VK_BAR0_REGSEG_DB_REG_GAP 8 /* + * DB register gap, + * DB1 at 0x48c and DB2 at 0x494 + */ + +/* reset register and specific values */ +#define VK_BAR0_RESET_DB_NUM 3 +#define VK_BAR0_RESET_DB_SOFT 0xffffffff +#define VK_BAR0_RESET_DB_HARD 0xfffffffd +#define VK_BAR0_RESET_RAMPDUMP 0xa0000000 + +#define VK_BAR0_Q_DB_BASE(q_num) (VK_BAR0_REGSEG_DB_BASE + \ + ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP)) +#define VK_BAR0_RESET_DB_BASE (VK_BAR0_REGSEG_DB_BASE + \ + (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP)) + +#define BAR_BOOTSRC_SELECT 0xc78 +/* BOOTSRC definitions */ +#define BOOTSRC_SOFT_ENABLE BIT(14) + +/* Card OS Firmware version size */ +#define BAR_FIRMWARE_TAG_SIZE 50 +#define FIRMWARE_STATUS_PRE_INIT_DONE 0x1f + +/* + * BAR1 + */ + +/* BAR1 message q definition */ + +/* indicate if msgq ctrl in BAR1 is populated */ +#define VK_BAR1_MSGQ_DEF_RDY 0x60c0 +/* ready marker value for the above location, normal boot2 */ +#define VK_BAR1_MSGQ_RDY_MARKER 0xbeefcafe +/* ready marker value for the above location, normal boot2 */ +#define VK_BAR1_DIAG_RDY_MARKER 0xdeadcafe +/* number of msgqs in BAR1 */ +#define VK_BAR1_MSGQ_NR 0x60c4 +/* BAR1 queue control structure offset */ +#define VK_BAR1_MSGQ_CTRL_OFF 0x60c8 + +/* BAR1 ucode and boot1 version tag */ +#define VK_BAR1_UCODE_VER_TAG 0x6170 +#define VK_BAR1_BOOT1_VER_TAG 0x61b0 +#define VK_BAR1_VER_TAG_SIZE 64 + +/* Memory to hold the DMA buffer memory address allocated for boot2 download */ +#define VK_BAR1_DMA_BUF_OFF_HI 0x61e0 +#define VK_BAR1_DMA_BUF_OFF_LO (VK_BAR1_DMA_BUF_OFF_HI + 4) +#define VK_BAR1_DMA_BUF_SZ (VK_BAR1_DMA_BUF_OFF_HI + 8) + +/* Scratch memory allocated on host for VK */ +#define VK_BAR1_SCRATCH_OFF_HI 0x61f0 +#define VK_BAR1_SCRATCH_OFF_LO (VK_BAR1_SCRATCH_OFF_HI + 4) +#define VK_BAR1_SCRATCH_SZ_ADDR (VK_BAR1_SCRATCH_OFF_HI + 8) +#define VK_BAR1_SCRATCH_DEF_NR_PAGES 32 + +/* BAR1 DAUTH info */ +#define VK_BAR1_DAUTH_BASE_ADDR 0x6200 +#define VK_BAR1_DAUTH_STORE_SIZE 0x48 +#define VK_BAR1_DAUTH_VALID_SIZE 0x8 +#define VK_BAR1_DAUTH_MAX 4 +#define VK_BAR1_DAUTH_STORE_ADDR(x) \ + (VK_BAR1_DAUTH_BASE_ADDR + \ + (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE)) +#define VK_BAR1_DAUTH_VALID_ADDR(x) \ + (VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE) + +/* BAR1 SOTP AUTH and REVID info */ +#define VK_BAR1_SOTP_REVID_BASE_ADDR 0x6340 +#define VK_BAR1_SOTP_REVID_SIZE 0x10 +#define VK_BAR1_SOTP_REVID_MAX 2 +#define VK_BAR1_SOTP_REVID_ADDR(x) \ + (VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE) + /* VK device supports a maximum of 3 bars */ #define MAX_BAR 3 @@ -21,9 +198,82 @@ enum pci_barno { #define BCM_VK_NUM_TTY 2 +/* DAUTH related info */ +struct bcm_vk_dauth_key { + char store[VK_BAR1_DAUTH_STORE_SIZE]; + char valid[VK_BAR1_DAUTH_VALID_SIZE]; +}; + +struct bcm_vk_dauth_info { + struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX]; +}; + struct bcm_vk { struct pci_dev *pdev; void __iomem *bar[MAX_BAR]; + + struct bcm_vk_dauth_info dauth_info; + + int devid; /* dev id allocated */ + + struct workqueue_struct *wq_thread; + struct work_struct wq_work; /* work queue for deferred job */ + unsigned long wq_offload[1]; /* various flags on wq requested */ + void *tdma_vaddr; /* test dma segment virtual addr */ + dma_addr_t tdma_addr; /* test dma segment bus addr */ +}; + +/* wq offload work items bits definitions */ +enum bcm_vk_wq_offload_flags { + BCM_VK_WQ_DWNLD_PEND = 0, + BCM_VK_WQ_DWNLD_AUTO = 1, }; +/* + * check if PCIe interface is down on read. Use it when it is + * certain that _val should never be all ones. + */ +#define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff) + +static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset) +{ + return readl(vk->bar[bar] + offset); +} + +static inline void vkwrite32(struct bcm_vk *vk, + u32 value, + enum pci_barno bar, + u64 offset) +{ + writel(value, vk->bar[bar] + offset); +} + +static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset) +{ + return readb(vk->bar[bar] + offset); +} + +static inline void vkwrite8(struct bcm_vk *vk, + u8 value, + enum pci_barno bar, + u64 offset) +{ + writeb(value, vk->bar[bar] + offset); +} + +static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk) +{ + u32 rdy_marker = 0; + u32 fw_status; + + fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS); + + if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY) + rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY); + + return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER); +} + +int bcm_vk_auto_load_all_images(struct bcm_vk *vk); + #endif diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c index 14afe2477b97..adc3103c7012 100644 --- a/drivers/misc/bcm-vk/bcm_vk_dev.c +++ b/drivers/misc/bcm-vk/bcm_vk_dev.c @@ -3,16 +3,72 @@ * Copyright 2018-2020 Broadcom. */ +#include #include +#include +#include #include #include #include +#include #include "bcm_vk.h" #define PCI_DEVICE_ID_VALKYRIE 0x5e87 #define PCI_DEVICE_ID_VIPER 0x5e88 +static DEFINE_IDA(bcm_vk_ida); + +enum soc_idx { + VALKYRIE_A0 = 0, + VALKYRIE_B0, + VIPER, + VK_IDX_INVALID +}; + +enum img_idx { + IMG_PRI = 0, + IMG_SEC, + IMG_PER_TYPE_MAX +}; + +struct load_image_entry { + const u32 image_type; + const char *image_name[IMG_PER_TYPE_MAX]; +}; + +#define NUM_BOOT_STAGES 2 +/* default firmware images names */ +static const struct load_image_entry image_tab[][NUM_BOOT_STAGES] = { + [VALKYRIE_A0] = { + {VK_IMAGE_TYPE_BOOT1, {"vk_a0-boot1.bin", "vk-boot1.bin"}}, + {VK_IMAGE_TYPE_BOOT2, {"vk_a0-boot2.bin", "vk-boot2.bin"}} + }, + [VALKYRIE_B0] = { + {VK_IMAGE_TYPE_BOOT1, {"vk_b0-boot1.bin", "vk-boot1.bin"}}, + {VK_IMAGE_TYPE_BOOT2, {"vk_b0-boot2.bin", "vk-boot2.bin"}} + }, + + [VIPER] = { + {VK_IMAGE_TYPE_BOOT1, {"vp-boot1.bin", ""}}, + {VK_IMAGE_TYPE_BOOT2, {"vp-boot2.bin", ""}} + }, +}; + +/* Location of memory base addresses of interest in BAR1 */ +/* Load Boot1 to start of ITCM */ +#define BAR1_CODEPUSH_BASE_BOOT1 0x100000 + +/* Allow minimum 1s for Load Image timeout responses */ +#define LOAD_IMAGE_TIMEOUT_MS (1 * MSEC_PER_SEC) + +/* Image startup timeouts */ +#define BOOT1_STARTUP_TIMEOUT_MS (5 * MSEC_PER_SEC) +#define BOOT2_STARTUP_TIMEOUT_MS (10 * MSEC_PER_SEC) + +/* 1ms wait for checking the transfer complete status */ +#define TXFR_COMPLETE_TIMEOUT_MS 1 + /* MSIX usages */ #define VK_MSIX_MSGQ_MAX 3 #define VK_MSIX_NOTF_MAX 1 @@ -24,13 +80,570 @@ /* Number of bits set in DMA mask*/ #define BCM_VK_DMA_BITS 64 +/* Ucode boot wait time */ +#define BCM_VK_UCODE_BOOT_US (100 * USEC_PER_MSEC) +/* 50% margin */ +#define BCM_VK_UCODE_BOOT_MAX_US ((BCM_VK_UCODE_BOOT_US * 3) >> 1) + +/* deinit time for the card os after receiving doorbell */ +#define BCM_VK_DEINIT_TIME_MS (2 * MSEC_PER_SEC) + +/* + * module parameters + */ +static bool auto_load = true; +module_param(auto_load, bool, 0444); +MODULE_PARM_DESC(auto_load, + "Load images automatically at PCIe probe time.\n"); +static uint nr_scratch_pages = VK_BAR1_SCRATCH_DEF_NR_PAGES; +module_param(nr_scratch_pages, uint, 0444); +MODULE_PARM_DESC(nr_scratch_pages, + "Number of pre allocated DMAable coherent pages.\n"); + +static int bcm_vk_intf_ver_chk(struct bcm_vk *vk) +{ + struct device *dev = &vk->pdev->dev; + u32 reg; + u16 major, minor; + int ret = 0; + + /* read interface register */ + reg = vkread32(vk, BAR_0, BAR_INTF_VER); + major = (reg >> BAR_INTF_VER_MAJOR_SHIFT) & BAR_INTF_VER_MASK; + minor = reg & BAR_INTF_VER_MASK; + + /* + * if major number is 0, it is pre-release and it would be allowed + * to continue, else, check versions accordingly + */ + if (!major) { + dev_warn(dev, "Pre-release major.minor=%d.%d - drv %d.%d\n", + major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR); + } else if (major != SEMANTIC_MAJOR) { + dev_err(dev, + "Intf major.minor=%d.%d rejected - drv %d.%d\n", + major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR); + ret = -EPFNOSUPPORT; + } else { + dev_dbg(dev, + "Intf major.minor=%d.%d passed - drv %d.%d\n", + major, minor, SEMANTIC_MAJOR, SEMANTIC_MINOR); + } + return ret; +} + +static inline int bcm_vk_wait(struct bcm_vk *vk, enum pci_barno bar, + u64 offset, u32 mask, u32 value, + unsigned long timeout_ms) +{ + struct device *dev = &vk->pdev->dev; + unsigned long start_time; + unsigned long timeout; + u32 rd_val, boot_status; + + start_time = jiffies; + timeout = start_time + msecs_to_jiffies(timeout_ms); + + do { + rd_val = vkread32(vk, bar, offset); + dev_dbg(dev, "BAR%d Offset=0x%llx: 0x%x\n", + bar, offset, rd_val); + + /* check for any boot err condition */ + boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + if (boot_status & BOOT_ERR_MASK) { + dev_err(dev, "Boot Err 0x%x, progress 0x%x after %d ms\n", + (boot_status & BOOT_ERR_MASK) >> BOOT_ERR_SHIFT, + boot_status & BOOT_PROG_MASK, + jiffies_to_msecs(jiffies - start_time)); + return -EFAULT; + } + + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + cpu_relax(); + cond_resched(); + } while ((rd_val & mask) != value); + + return 0; +} + +static int bcm_vk_sync_card_info(struct bcm_vk *vk) +{ + u32 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY); + + /* check for marker, but allow diags mode to skip sync */ + if (!bcm_vk_msgq_marker_valid(vk)) + return (rdy_marker == VK_BAR1_DIAG_RDY_MARKER ? 0 : -EINVAL); + + /* + * Write down scratch addr which is used for DMA. For + * signed part, BAR1 is accessible only after boot2 has come + * up + */ + if (vk->tdma_addr) { + vkwrite32(vk, (u64)vk->tdma_addr >> 32, BAR_1, + VK_BAR1_SCRATCH_OFF_HI); + vkwrite32(vk, (u32)vk->tdma_addr, BAR_1, + VK_BAR1_SCRATCH_OFF_LO); + vkwrite32(vk, nr_scratch_pages * PAGE_SIZE, BAR_1, + VK_BAR1_SCRATCH_SZ_ADDR); + } + return 0; +} + +static void bcm_vk_buf_notify(struct bcm_vk *vk, void *bufp, + dma_addr_t host_buf_addr, u32 buf_size) +{ + /* update the dma address to the card */ + vkwrite32(vk, (u64)host_buf_addr >> 32, BAR_1, + VK_BAR1_DMA_BUF_OFF_HI); + vkwrite32(vk, (u32)host_buf_addr, BAR_1, + VK_BAR1_DMA_BUF_OFF_LO); + vkwrite32(vk, buf_size, BAR_1, VK_BAR1_DMA_BUF_SZ); +} + +static int bcm_vk_load_image_by_type(struct bcm_vk *vk, u32 load_type, + const char *filename) +{ + struct device *dev = &vk->pdev->dev; + const struct firmware *fw = NULL; + void *bufp = NULL; + size_t max_buf, offset; + int ret; + u64 offset_codepush; + u32 codepush; + u32 value; + dma_addr_t boot_dma_addr; + bool is_stdalone; + + if (load_type == VK_IMAGE_TYPE_BOOT1) { + /* + * After POR, enable VK soft BOOTSRC so bootrom do not clear + * the pushed image (the TCM memories). + */ + value = vkread32(vk, BAR_0, BAR_BOOTSRC_SELECT); + value |= BOOTSRC_SOFT_ENABLE; + vkwrite32(vk, value, BAR_0, BAR_BOOTSRC_SELECT); + + codepush = CODEPUSH_BOOTSTART + CODEPUSH_BOOT1_ENTRY; + offset_codepush = BAR_CODEPUSH_SBL; + + /* Write a 1 to request SRAM open bit */ + vkwrite32(vk, CODEPUSH_BOOTSTART, BAR_0, offset_codepush); + + /* Wait for VK to respond */ + ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, SRAM_OPEN, + SRAM_OPEN, LOAD_IMAGE_TIMEOUT_MS); + if (ret < 0) { + dev_err(dev, "boot1 wait SRAM err - ret(%d)\n", ret); + goto err_buf_out; + } + + max_buf = SZ_256K; + bufp = dma_alloc_coherent(dev, + max_buf, + &boot_dma_addr, GFP_KERNEL); + if (!bufp) { + dev_err(dev, "Error allocating 0x%zx\n", max_buf); + ret = -ENOMEM; + goto err_buf_out; + } + } else if (load_type == VK_IMAGE_TYPE_BOOT2) { + codepush = CODEPUSH_BOOT2_ENTRY; + offset_codepush = BAR_CODEPUSH_SBI; + + /* Wait for VK to respond */ + ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, DDR_OPEN, + DDR_OPEN, LOAD_IMAGE_TIMEOUT_MS); + if (ret < 0) { + dev_err(dev, "boot2 wait DDR open error - ret(%d)\n", + ret); + goto err_buf_out; + } + + max_buf = SZ_4M; + bufp = dma_alloc_coherent(dev, + max_buf, + &boot_dma_addr, GFP_KERNEL); + if (!bufp) { + dev_err(dev, "Error allocating 0x%zx\n", max_buf); + ret = -ENOMEM; + goto err_buf_out; + } + + bcm_vk_buf_notify(vk, bufp, boot_dma_addr, max_buf); + } else { + dev_err(dev, "Error invalid image type 0x%x\n", load_type); + ret = -EINVAL; + goto err_buf_out; + } + + offset = 0; + ret = request_partial_firmware_into_buf(&fw, filename, dev, + bufp, max_buf, offset); + if (ret) { + dev_err(dev, "Error %d requesting firmware file: %s\n", + ret, filename); + goto err_firmware_out; + } + dev_dbg(dev, "size=0x%zx\n", fw->size); + if (load_type == VK_IMAGE_TYPE_BOOT1) + memcpy_toio(vk->bar[BAR_1] + BAR1_CODEPUSH_BASE_BOOT1, + bufp, + fw->size); + + dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", codepush, offset_codepush); + vkwrite32(vk, codepush, BAR_0, offset_codepush); + + if (load_type == VK_IMAGE_TYPE_BOOT1) { + u32 boot_status; + + /* wait until done */ + ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, + BOOT1_RUNNING, + BOOT1_RUNNING, + BOOT1_STARTUP_TIMEOUT_MS); + + boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + is_stdalone = !BCM_VK_INTF_IS_DOWN(boot_status) && + (boot_status & BOOT_STDALONE_RUNNING); + if (ret && !is_stdalone) { + dev_err(dev, + "Timeout %ld ms waiting for boot1 to come up - ret(%d)\n", + BOOT1_STARTUP_TIMEOUT_MS, ret); + goto err_firmware_out; + } else if (is_stdalone) { + u32 reg; + + reg = vkread32(vk, BAR_0, BAR_BOOT1_STDALONE_PROGRESS); + if ((reg & BOOT1_STDALONE_PROGRESS_MASK) == + BOOT1_STDALONE_SUCCESS) { + dev_info(dev, "Boot1 standalone success\n"); + ret = 0; + } else { + dev_err(dev, "Timeout %ld ms - Boot1 standalone failure\n", + BOOT1_STARTUP_TIMEOUT_MS); + ret = -EINVAL; + goto err_firmware_out; + } + } + } else if (load_type == VK_IMAGE_TYPE_BOOT2) { + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS); + + /* To send more data to VK than max_buf allowed at a time */ + do { + /* + * Check for ack from card. when Ack is received, + * it means all the data is received by card. + * Exit the loop after ack is received. + */ + ret = bcm_vk_wait(vk, BAR_0, BAR_BOOT_STATUS, + FW_LOADER_ACK_RCVD_ALL_DATA, + FW_LOADER_ACK_RCVD_ALL_DATA, + TXFR_COMPLETE_TIMEOUT_MS); + if (ret == 0) { + dev_dbg(dev, "Exit boot2 download\n"); + break; + } else if (ret == -EFAULT) { + dev_err(dev, "Error detected during ACK waiting"); + goto err_firmware_out; + } + + /* exit the loop, if there is no response from card */ + if (time_after(jiffies, timeout)) { + dev_err(dev, "Error. No reply from card\n"); + ret = -ETIMEDOUT; + goto err_firmware_out; + } + + /* Wait for VK to open BAR space to copy new data */ + ret = bcm_vk_wait(vk, BAR_0, offset_codepush, + codepush, 0, + TXFR_COMPLETE_TIMEOUT_MS); + if (ret == 0) { + offset += max_buf; + ret = request_partial_firmware_into_buf + (&fw, + filename, + dev, bufp, + max_buf, + offset); + if (ret) { + dev_err(dev, + "Error %d requesting firmware file: %s offset: 0x%zx\n", + ret, filename, offset); + goto err_firmware_out; + } + dev_dbg(dev, "size=0x%zx\n", fw->size); + dev_dbg(dev, "Signaling 0x%x to 0x%llx\n", + codepush, offset_codepush); + vkwrite32(vk, codepush, BAR_0, offset_codepush); + /* reload timeout after every codepush */ + timeout = jiffies + + msecs_to_jiffies(LOAD_IMAGE_TIMEOUT_MS); + } else if (ret == -EFAULT) { + dev_err(dev, "Error detected waiting for transfer\n"); + goto err_firmware_out; + } + } while (1); + + /* wait for fw status bits to indicate app ready */ + ret = bcm_vk_wait(vk, BAR_0, VK_BAR_FWSTS, + VK_FWSTS_READY, + VK_FWSTS_READY, + BOOT2_STARTUP_TIMEOUT_MS); + if (ret < 0) { + dev_err(dev, "Boot2 not ready - ret(%d)\n", ret); + goto err_firmware_out; + } + + is_stdalone = vkread32(vk, BAR_0, BAR_BOOT_STATUS) & + BOOT_STDALONE_RUNNING; + if (!is_stdalone) { + ret = bcm_vk_intf_ver_chk(vk); + if (ret) { + dev_err(dev, "failure in intf version check\n"); + goto err_firmware_out; + } + + /* sync & channel other info */ + ret = bcm_vk_sync_card_info(vk); + if (ret) { + dev_err(dev, "Syncing Card Info failure\n"); + goto err_firmware_out; + } + } + } + +err_firmware_out: + release_firmware(fw); + +err_buf_out: + if (bufp) + dma_free_coherent(dev, max_buf, bufp, boot_dma_addr); + + return ret; +} + +static u32 bcm_vk_next_boot_image(struct bcm_vk *vk) +{ + u32 boot_status; + u32 fw_status; + u32 load_type = 0; /* default for unknown */ + + boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS); + + if (!BCM_VK_INTF_IS_DOWN(boot_status) && (boot_status & SRAM_OPEN)) + load_type = VK_IMAGE_TYPE_BOOT1; + else if (boot_status == BOOT1_RUNNING) + load_type = VK_IMAGE_TYPE_BOOT2; + + /* Log status so that we know different stages */ + dev_info(&vk->pdev->dev, + "boot-status value for next image: 0x%x : fw-status 0x%x\n", + boot_status, fw_status); + + return load_type; +} + +static enum soc_idx get_soc_idx(struct bcm_vk *vk) +{ + struct pci_dev *pdev = vk->pdev; + enum soc_idx idx = VK_IDX_INVALID; + u32 rev; + static enum soc_idx const vk_soc_tab[] = { VALKYRIE_A0, VALKYRIE_B0 }; + + switch (pdev->device) { + case PCI_DEVICE_ID_VALKYRIE: + /* get the chip id to decide sub-class */ + rev = MAJOR_SOC_REV(vkread32(vk, BAR_0, BAR_CHIP_ID)); + if (rev < ARRAY_SIZE(vk_soc_tab)) { + idx = vk_soc_tab[rev]; + } else { + /* Default to A0 firmware for all other chip revs */ + idx = VALKYRIE_A0; + dev_warn(&pdev->dev, + "Rev %d not in image lookup table, default to idx=%d\n", + rev, idx); + } + break; + + case PCI_DEVICE_ID_VIPER: + idx = VIPER; + break; + + default: + dev_err(&pdev->dev, "no images for 0x%x\n", pdev->device); + } + return idx; +} + +static const char *get_load_fw_name(struct bcm_vk *vk, + const struct load_image_entry *entry) +{ + const struct firmware *fw; + struct device *dev = &vk->pdev->dev; + int ret; + unsigned long dummy; + int i; + + for (i = 0; i < IMG_PER_TYPE_MAX; i++) { + fw = NULL; + ret = request_partial_firmware_into_buf(&fw, + entry->image_name[i], + dev, &dummy, + sizeof(dummy), + 0); + release_firmware(fw); + if (!ret) + return entry->image_name[i]; + } + return NULL; +} + +int bcm_vk_auto_load_all_images(struct bcm_vk *vk) +{ + int i, ret = -1; + enum soc_idx idx; + struct device *dev = &vk->pdev->dev; + u32 curr_type; + const char *curr_name; + + idx = get_soc_idx(vk); + if (idx == VK_IDX_INVALID) + goto auto_load_all_exit; + + /* log a message to know the relative loading order */ + dev_dbg(dev, "Load All for device %d\n", vk->devid); + + for (i = 0; i < NUM_BOOT_STAGES; i++) { + curr_type = image_tab[idx][i].image_type; + if (bcm_vk_next_boot_image(vk) == curr_type) { + curr_name = get_load_fw_name(vk, &image_tab[idx][i]); + if (!curr_name) { + dev_err(dev, "No suitable firmware exists for type %d", + curr_type); + ret = -ENOENT; + goto auto_load_all_exit; + } + ret = bcm_vk_load_image_by_type(vk, curr_type, + curr_name); + dev_info(dev, "Auto load %s, ret %d\n", + curr_name, ret); + + if (ret) { + dev_err(dev, "Error loading default %s\n", + curr_name); + goto auto_load_all_exit; + } + } + } + +auto_load_all_exit: + return ret; +} + +static int bcm_vk_trigger_autoload(struct bcm_vk *vk) +{ + if (test_and_set_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload) != 0) + return -EPERM; + + set_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload); + queue_work(vk->wq_thread, &vk->wq_work); + + return 0; +} + +/* + * deferred work queue for auto download. + */ +static void bcm_vk_wq_handler(struct work_struct *work) +{ + struct bcm_vk *vk = container_of(work, struct bcm_vk, wq_work); + + if (test_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload)) { + bcm_vk_auto_load_all_images(vk); + + /* + * at the end of operation, clear AUTO bit and pending + * bit + */ + clear_bit(BCM_VK_WQ_DWNLD_AUTO, vk->wq_offload); + clear_bit(BCM_VK_WQ_DWNLD_PEND, vk->wq_offload); + } +} + +static void bcm_to_v_reset_doorbell(struct bcm_vk *vk, u32 db_val) +{ + vkwrite32(vk, db_val, BAR_0, VK_BAR0_RESET_DB_BASE); +} + +static int bcm_vk_trigger_reset(struct bcm_vk *vk) +{ + u32 i; + u32 value, boot_status; + static const u32 bar0_reg_clr_list[] = { BAR_OS_UPTIME, + BAR_INTF_VER, + BAR_CARD_VOLTAGE, + BAR_CARD_TEMPERATURE, + BAR_CARD_PWR_AND_THRE }; + + /* make tag '\0' terminated */ + vkwrite32(vk, 0, BAR_1, VK_BAR1_BOOT1_VER_TAG); + + for (i = 0; i < VK_BAR1_DAUTH_MAX; i++) { + vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_STORE_ADDR(i)); + vkwrite32(vk, 0, BAR_1, VK_BAR1_DAUTH_VALID_ADDR(i)); + } + for (i = 0; i < VK_BAR1_SOTP_REVID_MAX; i++) + vkwrite32(vk, 0, BAR_1, VK_BAR1_SOTP_REVID_ADDR(i)); + + /* + * When boot request fails, the CODE_PUSH_OFFSET stays persistent. + * Allowing us to debug the failure. When we call reset, + * we should clear CODE_PUSH_OFFSET so ROM does not execute + * boot again (and fails again) and instead waits for a new + * codepush. And, if previous boot has encountered error, need + * to clear the entry values + */ + boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + if (boot_status & BOOT_ERR_MASK) { + dev_info(&vk->pdev->dev, + "Card in boot error 0x%x, clear CODEPUSH val\n", + boot_status); + value = 0; + } else { + value = vkread32(vk, BAR_0, BAR_CODEPUSH_SBL); + value &= CODEPUSH_MASK; + } + vkwrite32(vk, value, BAR_0, BAR_CODEPUSH_SBL); + + /* reset fw_status with proper reason, and press db */ + vkwrite32(vk, VK_FWSTS_RESET_MBOX_DB, BAR_0, VK_BAR_FWSTS); + bcm_to_v_reset_doorbell(vk, VK_BAR0_RESET_DB_SOFT); + + /* clear other necessary registers records */ + for (i = 0; i < ARRAY_SIZE(bar0_reg_clr_list); i++) + vkwrite32(vk, 0, BAR_0, bar0_reg_clr_list[i]); + + return 0; +} + static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int err; int i; + int id; int irq; + char name[20]; struct bcm_vk *vk; struct device *dev = &pdev->dev; + u32 boot_status; vk = kzalloc(sizeof(*vk), GFP_KERNEL); if (!vk) @@ -57,6 +670,18 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_disable_pdev; } + /* The tdma is a scratch area for some DMA testings. */ + if (nr_scratch_pages) { + vk->tdma_vaddr = dma_alloc_coherent + (dev, + nr_scratch_pages * PAGE_SIZE, + &vk->tdma_addr, GFP_KERNEL); + if (!vk->tdma_vaddr) { + err = -ENOMEM; + goto err_disable_pdev; + } + } + pci_set_master(pdev); pci_set_drvdata(pdev, vk); @@ -85,8 +710,53 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } } + id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + err = id; + dev_err(dev, "unable to get id\n"); + goto err_iounmap; + } + + vk->devid = id; + snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id); + + INIT_WORK(&vk->wq_work, bcm_vk_wq_handler); + + /* create dedicated workqueue */ + vk->wq_thread = create_singlethread_workqueue(name); + if (!vk->wq_thread) { + dev_err(dev, "Fail to create workqueue thread\n"); + err = -ENOMEM; + goto err_ida_remove; + } + + /* sync other info */ + bcm_vk_sync_card_info(vk); + + /* + * lets trigger an auto download. We don't want to do it serially here + * because at probing time, it is not supposed to block for a long time. + */ + boot_status = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + if (auto_load) { + if ((boot_status & BOOT_STATE_MASK) == BROM_RUNNING) { + if (bcm_vk_trigger_autoload(vk)) + goto err_destroy_workqueue; + } else { + dev_err(dev, + "Auto-load skipped - BROM not in proper state (0x%x)\n", + boot_status); + } + } + return 0; +err_destroy_workqueue: + destroy_workqueue(vk->wq_thread); + +err_ida_remove: + ida_simple_remove(&bcm_vk_ida, id); + err_iounmap: for (i = 0; i < MAX_BAR; i++) { if (vk->bar[i]) @@ -95,6 +765,10 @@ err_iounmap: pci_release_regions(pdev); err_disable_pdev: + if (vk->tdma_vaddr) + dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE, + vk->tdma_vaddr, vk->tdma_addr); + pci_free_irq_vectors(pdev); pci_disable_device(pdev); pci_dev_put(pdev); @@ -110,6 +784,22 @@ static void bcm_vk_remove(struct pci_dev *pdev) int i; struct bcm_vk *vk = pci_get_drvdata(pdev); + /* + * Trigger a reset to card and wait enough time for UCODE to rerun, + * which re-initialize the card into its default state. + * This ensures when driver is re-enumerated it will start from + * a completely clean state. + */ + bcm_vk_trigger_reset(vk); + usleep_range(BCM_VK_UCODE_BOOT_US, BCM_VK_UCODE_BOOT_MAX_US); + + if (vk->tdma_vaddr) + dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE, + vk->tdma_vaddr, vk->tdma_addr); + + cancel_work_sync(&vk->wq_work); + destroy_workqueue(vk->wq_thread); + for (i = 0; i < MAX_BAR; i++) { if (vk->bar[i]) pci_iounmap(pdev, vk->bar[i]); @@ -120,6 +810,38 @@ static void bcm_vk_remove(struct pci_dev *pdev) pci_disable_device(pdev); } +static void bcm_vk_shutdown(struct pci_dev *pdev) +{ + struct bcm_vk *vk = pci_get_drvdata(pdev); + u32 reg, boot_stat; + + reg = vkread32(vk, BAR_0, BAR_BOOT_STATUS); + boot_stat = reg & BOOT_STATE_MASK; + + if (boot_stat == BOOT1_RUNNING) { + /* simply trigger a reset interrupt to park it */ + bcm_vk_trigger_reset(vk); + } else if (boot_stat == BROM_NOT_RUN) { + int err; + u16 lnksta; + + /* + * The boot status only reflects boot condition since last reset + * As ucode will run only once to configure pcie, if multiple + * resets happen, we lost track if ucode has run or not. + * Here, read the current link speed and use that to + * sync up the bootstatus properly so that on reboot-back-up, + * it has the proper state to start with autoload + */ + err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta); + if (!err && + (lnksta & PCI_EXP_LNKSTA_CLS) != PCI_EXP_LNKSTA_CLS_2_5GB) { + reg |= BROM_STATUS_COMPLETE; + vkwrite32(vk, reg, BAR_0, BAR_BOOT_STATUS); + } + } +} + static const struct pci_device_id bcm_vk_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VALKYRIE), }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_VIPER), }, @@ -132,6 +854,7 @@ static struct pci_driver pci_driver = { .id_table = bcm_vk_ids, .probe = bcm_vk_probe, .remove = bcm_vk_remove, + .shutdown = bcm_vk_shutdown, }; module_pci_driver(pci_driver); -- cgit v1.2.3