From 781551df57c792aee291cd80a6aca24cd56cdd71 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 7 Dec 2012 09:06:59 +0100 Subject: misc: Add Lattice ECP3 FPGA configuration via SPI This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus. Here an example on my custom MPC5200 based board: $ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading leads to these messages: lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured! Signed-off-by: Stefan Roese Acked-by: Ming Lei Reviewed-by: Grant Likely Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/misc/Makefile') diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 5c99726dd617..35a1463c72d9 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -51,3 +51,4 @@ obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ +obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o -- cgit v1.2.3