From 422dcafe477c7240d03c7b150704c45e0b17be57 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 30 Jan 2019 11:41:26 +0000 Subject: mfd: lochnagar: Add support for the Cirrus Logic Lochnagar Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Audio system topology, clocking and power can all be controlled through the Lochnagar controller chip, allowing the device under test to be used in a variety of possible use cases. As the Lochnagar is a fairly complex device this MFD driver allows the drivers for the various features to be bound in. Initially clocking, regulator and pinctrl will be added as these are necessary to configure the system. But in time at least audio and voltage/current monitoring will also be added. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6e58221f5c28..f38f8741c68e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1686,6 +1686,14 @@ config MFD_VX855 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi and/or vx855_gpio drivers for this to do anything useful. +config MFD_LOCHNAGAR + bool "Cirrus Logic Lochnagar Audio Development Board" + select MFD_CORE + select REGMAP_I2C + depends on I2C=y && OF + help + Support for Cirrus Logic Lochnagar audio development board. + config MFD_ARIZONA select REGMAP select REGMAP_IRQ -- cgit v1.2.3