From d930b5b5bf122a61952cfebabb1e618682a2631a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 30 Nov 2016 19:36:14 -0200 Subject: [media] mn88473: fix chip id check on probe A register used to identify chip during probe was overwritten during firmware download and due to that later probe's for warm chip were failing. Detect chip from the another register, which is located on different register bank 2. Fixes: 7908fad99a6c ("[media] mn88473: finalize driver") Cc: # v4.8+ Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/mn88473.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/media/dvb-frontends') diff --git a/drivers/media/dvb-frontends/mn88473.c b/drivers/media/dvb-frontends/mn88473.c index f3b59a5827d9..c221c7d2ac3e 100644 --- a/drivers/media/dvb-frontends/mn88473.c +++ b/drivers/media/dvb-frontends/mn88473.c @@ -648,18 +648,6 @@ static int mn88473_probe(struct i2c_client *client, goto err_kfree; } - /* Check demod answers with correct chip id */ - ret = regmap_read(dev->regmap[0], 0xff, &uitmp); - if (ret) - goto err_regmap_0_regmap_exit; - - dev_dbg(&client->dev, "chip id=%02x\n", uitmp); - - if (uitmp != 0x03) { - ret = -ENODEV; - goto err_regmap_0_regmap_exit; - } - /* * Chip has three I2C addresses for different register banks. Used * addresses are 0x18, 0x1a and 0x1c. We register two dummy clients, @@ -696,6 +684,18 @@ static int mn88473_probe(struct i2c_client *client, } i2c_set_clientdata(dev->client[2], dev); + /* Check demod answers with correct chip id */ + ret = regmap_read(dev->regmap[2], 0xff, &uitmp); + if (ret) + goto err_regmap_2_regmap_exit; + + dev_dbg(&client->dev, "chip id=%02x\n", uitmp); + + if (uitmp != 0x03) { + ret = -ENODEV; + goto err_regmap_2_regmap_exit; + } + /* Sleep because chip is active by default */ ret = regmap_write(dev->regmap[2], 0x05, 0x3e); if (ret) -- cgit v1.2.3