From d6c59c13c070cb9d043edf38b4639fdacdb0c18c Mon Sep 17 00:00:00 2001 From: Martin Bachem Date: Tue, 21 Aug 2007 14:26:21 +0200 Subject: hisax: update hfc_usb driver This fixes handling of USB ISO completion error -EXDEV and includes several other changes to current CVS version at isdn4linux.de (changes in debug flags, style of code remarks, etc) Signed-off-by: Martin Bachem Acked-by: Karsten Keil Signed-off-by: Linus Torvalds --- drivers/isdn/hisax/hfc_usb.c | 603 +++++++++++++++++-------------------------- drivers/isdn/hisax/hfc_usb.h | 130 ++++------ 2 files changed, 288 insertions(+), 445 deletions(-) (limited to 'drivers/isdn') diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index b1a26e02df02..60843b3f3b6f 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1,12 +1,12 @@ /* * hfc_usb.c * - * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $ + * $Id: hfc_usb.c,v 2.3.2.20 2007/08/20 14:07:54 mbachem Exp $ * * modular HiSax ISDN driver for Colognechip HFC-S USB chip * - * Authors : Peter Sprenger (sprenger@moving-bytes.de) - * Martin Bachem (info@colognechip.com) + * Authors : Peter Sprenger (sprenger@moving-bytes.de) + * Martin Bachem (m.bachem@gmx.de, info@colognechip.com) * * based on the first hfc_usb driver of * Werner Cornelius (werner@isdn-development.de) @@ -37,24 +37,25 @@ #include #include #include +#include +#include +#include #include "hisax.h" #include "hisax_if.h" #include "hfc_usb.h" static const char *hfcusb_revision = - "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ "; + "$Revision: 2.3.2.20 $ $Date: 2007/08/20 14:07:54 $ "; /* Hisax debug support -* use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG +* debug flags defined in hfc_usb.h as HFCUSB_DBG_[*] */ -#ifdef CONFIG_HISAX_DEBUG -#include #define __debug_variable hfc_debug #include "hisax_debug.h" static u_int debug; module_param(debug, uint, 0); static int hfc_debug; -#endif + /* private vendor specific data */ typedef struct { @@ -63,9 +64,7 @@ typedef struct { char *vend_name; // device name } hfcsusb_vdata; -/****************************************/ -/* data defining the devices to be used */ -/****************************************/ +/* VID/PID device list */ static struct usb_device_id hfcusb_idtab[] = { { USB_DEVICE(0x0959, 0x2bd0), @@ -90,49 +89,47 @@ static struct usb_device_id hfcusb_idtab[] = { .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Stollmann USB TA"}), - }, + }, { USB_DEVICE(0x0742, 0x2009), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "Aceex USB ISDN TA"}), - }, + }, { USB_DEVICE(0x0742, 0x200A), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {4, 0, 2, 1}, "OEM USB ISDN TA"}), - }, + }, { USB_DEVICE(0x08e3, 0x0301), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {2, 0, 1, 4}, "Olitec USB RNIS"}), - }, + }, { USB_DEVICE(0x07fa, 0x0846), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Bewan Modem RNIS USB"}), - }, + }, { USB_DEVICE(0x07fa, 0x0847), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Djinn Numeris USB"}), - }, + }, { USB_DEVICE(0x07b0, 0x0006), .driver_info = (unsigned long) &((hfcsusb_vdata) {LED_SCHEME1, {0x80, -64, -32, -16}, "Twister ISDN TA"}), - }, + }, { } }; -/***************************************************************/ /* structure defining input+output fifos (interrupt/bulk mode) */ -/***************************************************************/ struct usb_fifo; /* forward definition */ typedef struct iso_urb_struct { struct urb *purb; @@ -140,8 +137,8 @@ typedef struct iso_urb_struct { struct usb_fifo *owner_fifo; /* pointer to owner fifo */ } iso_urb_struct; - struct hfcusb_data; /* forward definition */ + typedef struct usb_fifo { int fifonum; /* fifo index attached to this structure */ int active; /* fifo is currently active */ @@ -160,15 +157,12 @@ typedef struct usb_fifo { struct hisax_if *hif; /* hisax interface */ int delete_flg; /* only delete skbuff once */ int last_urblen; /* remember length of last packet */ - } usb_fifo; -/*********************************************/ /* structure holding all data for one device */ -/*********************************************/ typedef struct hfcusb_data { /* HiSax Interface for loadable Layer1 drivers */ - struct hisax_d_if d_if; /* see hisax_if.h */ + struct hisax_d_if d_if; /* see hisax_if.h */ struct hisax_b_if b_if[2]; /* see hisax_if.h */ int protocol; @@ -176,12 +170,13 @@ typedef struct hfcusb_data { int if_used; /* used interface number */ int alt_used; /* used alternate config */ int ctrl_paksize; /* control pipe packet size */ - int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */ + int ctrl_in_pipe, /* handles for control pipe */ + ctrl_out_pipe; int cfg_used; /* configuration index used */ int vend_idx; /* vendor found */ int b_mode[2]; /* B-channel mode */ int l1_activated; /* layer 1 activated */ - int disc_flag; /* 'true' if device was disonnected to avoid some USB actions */ + int disc_flag; /* TRUE if device was disonnected to avoid some USB actions */ int packet_size, iso_packet_size; /* control pipe background handling */ @@ -208,7 +203,6 @@ typedef struct hfcusb_data { static void collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish); - static inline const char * symbolic(struct hfcusb_symbolic_list list[], const int num) { @@ -219,10 +213,6 @@ symbolic(struct hfcusb_symbolic_list list[], const int num) return ""; } - -/******************************************************/ -/* start next background transfer for control channel */ -/******************************************************/ static void ctrl_start_transfer(hfcusb_data * hfc) { @@ -240,10 +230,6 @@ ctrl_start_transfer(hfcusb_data * hfc) } } /* ctrl_start_transfer */ -/************************************/ -/* queue a control transfer request */ -/* return 0 on success. */ -/************************************/ static int queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val, int action) { @@ -260,19 +246,8 @@ queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val, int action) if (++hfc->ctrl_cnt == 1) ctrl_start_transfer(hfc); return (0); -} /* queue_control_request */ - -static int -control_action_handler(hfcusb_data * hfc, int reg, int val, int action) -{ - if (!action) - return (1); /* no action defined */ - return (0); } -/***************************************************************/ -/* control completion routine handling background control cmds */ -/***************************************************************/ static void ctrl_complete(struct urb *urb) { @@ -282,9 +257,6 @@ ctrl_complete(struct urb *urb) urb->dev = hfc->dev; if (hfc->ctrl_cnt) { buf = &hfc->ctrl_buff[hfc->ctrl_out_idx]; - control_action_handler(hfc, buf->hfc_reg, buf->reg_val, - buf->action); - hfc->ctrl_cnt--; /* decrement actual count */ if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_out_idx = 0; /* pointer wrap */ @@ -293,9 +265,7 @@ ctrl_complete(struct urb *urb) } } /* ctrl_complete */ -/***************************************************/ /* write led data to auxport & invert if necessary */ -/***************************************************/ static void write_led(hfcusb_data * hfc, __u8 led_state) { @@ -305,9 +275,6 @@ write_led(hfcusb_data * hfc, __u8 led_state) } } -/**************************/ -/* handle LED bits */ -/**************************/ static void set_led_bit(hfcusb_data * hfc, signed short led_bits, int unset) { @@ -324,9 +291,7 @@ set_led_bit(hfcusb_data * hfc, signed short led_bits, int unset) } } -/**************************/ -/* handle LED requests */ -/**************************/ +/* handle LED requests */ static void handle_led(hfcusb_data * hfc, int event) { @@ -339,85 +304,73 @@ handle_led(hfcusb_data * hfc, int event) switch (event) { case LED_POWER_ON: - set_led_bit(hfc, driver_info->led_bits[0], - 0); - set_led_bit(hfc, driver_info->led_bits[1], - 1); - set_led_bit(hfc, driver_info->led_bits[2], - 1); - set_led_bit(hfc, driver_info->led_bits[3], - 1); + set_led_bit(hfc, driver_info->led_bits[0], 0); + set_led_bit(hfc, driver_info->led_bits[1], 1); + set_led_bit(hfc, driver_info->led_bits[2], 1); + set_led_bit(hfc, driver_info->led_bits[3], 1); break; - case LED_POWER_OFF: /* no Power off handling */ + case LED_POWER_OFF: + set_led_bit(hfc, driver_info->led_bits[0], 1); + set_led_bit(hfc, driver_info->led_bits[1], 1); + set_led_bit(hfc, driver_info->led_bits[2], 1); + set_led_bit(hfc, driver_info->led_bits[3], 1); break; case LED_S0_ON: - set_led_bit(hfc, driver_info->led_bits[1], - 0); + set_led_bit(hfc, driver_info->led_bits[1], 0); break; case LED_S0_OFF: - set_led_bit(hfc, driver_info->led_bits[1], - 1); + set_led_bit(hfc, driver_info->led_bits[1], 1); break; case LED_B1_ON: - set_led_bit(hfc, driver_info->led_bits[2], - 0); + set_led_bit(hfc, driver_info->led_bits[2], 0); break; case LED_B1_OFF: - set_led_bit(hfc, driver_info->led_bits[2], - 1); + set_led_bit(hfc, driver_info->led_bits[2], 1); break; case LED_B2_ON: - set_led_bit(hfc, driver_info->led_bits[3], - 0); + set_led_bit(hfc, driver_info->led_bits[3], 0); break; case LED_B2_OFF: - set_led_bit(hfc, driver_info->led_bits[3], - 1); + set_led_bit(hfc, driver_info->led_bits[3], 1); break; } write_led(hfc, hfc->led_state); } -/********************************/ -/* called when timer t3 expires */ -/********************************/ +/* ISDN l1 timer T3 expires */ static void l1_timer_expire_t3(hfcusb_data * hfc) { hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T3 expire)"); -#endif - hfc->l1_activated = false; + + hfc->l1_activated = 0; handle_led(hfc, LED_S0_OFF); /* deactivate : */ queue_control_request(hfc, HFCUSB_STATES, 0x10, 1); queue_control_request(hfc, HFCUSB_STATES, 3, 1); } -/********************************/ -/* called when timer t4 expires */ -/********************************/ +/* ISDN l1 timer T4 expires */ static void l1_timer_expire_t4(hfcusb_data * hfc) { hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_DEACTIVATE | INDICATION sent (T4 expire)"); -#endif - hfc->l1_activated = false; + + hfc->l1_activated = 0; handle_led(hfc, LED_S0_OFF); } -/*****************************/ -/* handle S0 state changes */ -/*****************************/ +/* S0 state changed */ static void -state_handler(hfcusb_data * hfc, __u8 state) +s0_state_handler(hfcusb_data * hfc, __u8 state) { __u8 old_state; @@ -425,38 +378,29 @@ state_handler(hfcusb_data * hfc, __u8 state) if (state == old_state || state < 1 || state > 8) return; -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: new S0 state:%d old_state:%d", state, - old_state); -#endif + DBG(HFCUSB_DBG_STATES, "HFC-S USB: S0 statechange(%d -> %d)", + old_state, state); + if (state < 4 || state == 7 || state == 8) { if (timer_pending(&hfc->t3_timer)) del_timer(&hfc->t3_timer); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: T3 deactivated"); -#endif + DBG(HFCUSB_DBG_STATES, "HFC-S USB: T3 deactivated"); } if (state >= 7) { if (timer_pending(&hfc->t4_timer)) del_timer(&hfc->t4_timer); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: T4 deactivated"); -#endif + DBG(HFCUSB_DBG_STATES, "HFC-S USB: T4 deactivated"); } if (state == 7 && !hfc->l1_activated) { hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_ACTIVATE | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: PH_ACTIVATE | INDICATION sent"); -#endif - hfc->l1_activated = true; + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_ACTIVATE | INDICATION sent"); + hfc->l1_activated = 1; handle_led(hfc, LED_S0_ON); } else if (state <= 3 /* && activated */ ) { if (old_state == 7 || old_state == 8) { -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: T4 activated"); -#endif + DBG(HFCUSB_DBG_STATES, "HFC-S USB: T4 activated"); if (!timer_pending(&hfc->t4_timer)) { hfc->t4_timer.expires = jiffies + (HFC_TIMER_T4 * HZ) / 1000; @@ -466,18 +410,15 @@ state_handler(hfcusb_data * hfc, __u8 state) hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_DEACTIVATE | INDICATION sent"); -#endif - hfc->l1_activated = false; + hfc->l1_activated = 0; handle_led(hfc, LED_S0_OFF); } } hfc->l1_state = state; } -/* prepare iso urb */ static void fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, void *buf, int num_packets, int packet_size, int interval, @@ -503,15 +444,16 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, } /* allocs urbs and start isoc transfer with two pending urbs to avoid - gaps in the transfer chain */ + * gaps in the transfer chain + */ static int start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb, usb_complete_t complete, int packet_size) { int i, k, errcode; - printk(KERN_INFO "HFC-S USB: starting ISO-chain for Fifo %i\n", - fifo->fifonum); + DBG(HFCUSB_DBG_INIT, "HFC-S USB: starting ISO-URBs for fifo:%d\n", + fifo->fifonum); /* allocate Memory for Iso out Urbs */ for (i = 0; i < 2; i++) { @@ -556,10 +498,9 @@ start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb, errcode = usb_submit_urb(fifo->iso[i].purb, GFP_KERNEL); fifo->active = (errcode >= 0) ? 1 : 0; - if (errcode < 0) { - printk(KERN_INFO "HFC-S USB: %s URB nr:%d\n", - symbolic(urb_errlist, errcode), i); - }; + if (errcode < 0) + printk(KERN_INFO "HFC-S USB: usb_submit_urb URB nr:%d, error(%i): '%s'\n", + i, errcode, symbolic(urb_errlist, errcode)); } return (fifo->active); } @@ -572,16 +513,15 @@ stop_isoc_chain(usb_fifo * fifo) for (i = 0; i < 2; i++) { if (fifo->iso[i].purb) { -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, + DBG(HFCUSB_DBG_INIT, "HFC-S USB: Stopping iso chain for fifo %i.%i", fifo->fifonum, i); -#endif usb_kill_urb(fifo->iso[i].purb); usb_free_urb(fifo->iso[i].purb); fifo->iso[i].purb = NULL; } } + usb_kill_urb(fifo->urb); usb_free_urb(fifo->urb); fifo->urb = NULL; @@ -594,9 +534,6 @@ static int iso_packets[8] = ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D }; -/*****************************************************/ -/* transmit completion routine for all ISO tx fifos */ -/*****************************************************/ static void tx_iso_complete(struct urb *urb) { @@ -607,20 +544,38 @@ tx_iso_complete(struct urb *urb) errcode; int frame_complete, transp_mode, fifon, status; __u8 threshbit; - __u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80 }; fifon = fifo->fifonum; status = urb->status; tx_offset = 0; + /* ISO transfer only partially completed, + look at individual frame status for details */ + if (status == -EXDEV) { + DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: tx_iso_complete with -EXDEV" + ", urb->status %d, fifonum %d\n", + status, fifon); + + for (k = 0; k < iso_packets[fifon]; ++k) { + errcode = urb->iso_frame_desc[k].status; + if (errcode) + DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: tx_iso_complete " + "packet %i, status: %i\n", + k, errcode); + } + + // clear status, so go on with ISO transfers + status = 0; + } + if (fifo->active && !status) { transp_mode = 0; if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS) - transp_mode = true; + transp_mode = 1; /* is FifoFull-threshold set for our channel? */ - threshbit = threshtable[fifon] & hfc->threshold_mask; + threshbit = (hfc->threshold_mask & (1 << fifon)); num_isoc_packets = iso_packets[fifon]; /* predict dataflow to avoid fifo overflow */ @@ -635,8 +590,9 @@ tx_iso_complete(struct urb *urb) tx_iso_complete, urb->context); memset(context_iso_urb->buffer, 0, sizeof(context_iso_urb->buffer)); - frame_complete = false; - /* Generate next Iso Packets */ + frame_complete = 0; + + /* Generate next ISO Packets */ for (k = 0; k < num_isoc_packets; ++k) { if (fifo->skbuff) { len = fifo->skbuff->len; @@ -661,7 +617,7 @@ tx_iso_complete(struct urb *urb) /* add 2 byte flags and 16bit CRC at end of ISDN frame */ fifo->bit_line += 32; } - frame_complete = true; + frame_complete = 1; } memcpy(context_iso_urb->buffer + @@ -688,7 +644,7 @@ tx_iso_complete(struct urb *urb) } if (frame_complete) { - fifo->delete_flg = true; + fifo->delete_flg = 1; fifo->hif->l1l2(fifo->hif, PH_DATA | CONFIRM, (void *) (unsigned long) fifo->skbuff-> @@ -696,30 +652,26 @@ tx_iso_complete(struct urb *urb) if (fifo->skbuff && fifo->delete_flg) { dev_kfree_skb_any(fifo->skbuff); fifo->skbuff = NULL; - fifo->delete_flg = false; + fifo->delete_flg = 0; } - frame_complete = false; + frame_complete = 0; } } errcode = usb_submit_urb(urb, GFP_ATOMIC); if (errcode < 0) { printk(KERN_INFO - "HFC-S USB: error submitting ISO URB: %d \n", + "HFC-S USB: error submitting ISO URB: %d\n", errcode); } } else { if (status && !hfc->disc_flag) { printk(KERN_INFO - "HFC-S USB: tx_iso_complete : urb->status %s (%i), fifonum=%d\n", - symbolic(urb_errlist, status), status, - fifon); + "HFC-S USB: tx_iso_complete: error(%i): '%s', fifonum=%d\n", + status, symbolic(urb_errlist, status), fifon); } } -} /* tx_iso_complete */ +} -/*****************************************************/ -/* receive completion routine for all ISO tx fifos */ -/*****************************************************/ static void rx_iso_complete(struct urb *urb) { @@ -731,21 +683,25 @@ rx_iso_complete(struct urb *urb) unsigned int iso_status; __u8 *buf; static __u8 eof[8]; -#ifdef CONFIG_HISAX_DEBUG - __u8 i; -#endif fifon = fifo->fifonum; status = urb->status; if (urb->status == -EOVERFLOW) { -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n", - fifon); -#endif + DBG(HFCUSB_DBG_VERBOSE_USB, + "HFC-USB: ignoring USB DATAOVERRUN fifo(%i)", fifon); + status = 0; + } + + /* ISO transfer only partially completed, + look at individual frame status for details */ + if (status == -EXDEV) { + DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: rx_iso_complete with -EXDEV " + "urb->status %d, fifonum %d\n", + status, fifon); status = 0; } + if (fifo->active && !status) { num_isoc_packets = iso_packets[fifon]; maxlen = fifo->usb_packet_maxlen; @@ -754,40 +710,38 @@ rx_iso_complete(struct urb *urb) offset = urb->iso_frame_desc[k].offset; buf = context_iso_urb->buffer + offset; iso_status = urb->iso_frame_desc[k].status; -#ifdef CONFIG_HISAX_DEBUG + if (iso_status && !hfc->disc_flag) - DBG(USB_DBG, - "HFC-S USB: ISO packet failure - status:%x", - iso_status); + DBG(HFCUSB_DBG_VERBOSE_USB, + "HFC-S USB: rx_iso_complete " + "ISO packet %i, status: %i\n", + k, iso_status); - if ((fifon == 5) && (debug > 1)) { - printk(KERN_INFO + if (fifon == HFCUSB_D_RX) { + DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: ISO-D-RX lst_urblen:%2d " - "act_urblen:%2d max-urblen:%2d " - "EOF:0x%0x DATA: ", + "act_urblen:%2d max-urblen:%2d EOF:0x%0x", fifo->last_urblen, len, maxlen, eof[5]); - for (i = 0; i < len; i++) - printk("%.2x ", buf[i]); - printk("\n"); + + DBG_PACKET(HFCUSB_DBG_VERBOSE_USB, buf, len); } -#endif + if (fifo->last_urblen != maxlen) { /* the threshold mask is in the 2nd status byte */ hfc->threshold_mask = buf[1]; /* care for L1 state only for D-Channel to avoid overlapped iso completions */ - if (fifon == 5) { + if (fifon == HFCUSB_D_RX) { /* the S0 state is in the upper half of the 1st status byte */ - state_handler(hfc, buf[0] >> 4); + s0_state_handler(hfc, buf[0] >> 4); } eof[fifon] = buf[0] & 1; if (len > 2) collect_rx_frame(fifo, buf + 2, len - 2, - (len < - maxlen) ? + (len < maxlen) ? eof[fifon] : 0); } else { collect_rx_frame(fifo, buf, len, @@ -804,41 +758,37 @@ rx_iso_complete(struct urb *urb) rx_iso_complete, urb->context); errcode = usb_submit_urb(urb, GFP_ATOMIC); if (errcode < 0) { - printk(KERN_INFO - "HFC-S USB: error submitting ISO URB: %d \n", + printk(KERN_ERR + "HFC-S USB: error submitting ISO URB: %d\n", errcode); } } else { if (status && !hfc->disc_flag) { - printk(KERN_INFO + printk(KERN_ERR "HFC-S USB: rx_iso_complete : " "urb->status %d, fifonum %d\n", status, fifon); } } -} /* rx_iso_complete */ +} -/*****************************************************/ -/* collect data from interrupt or isochron in */ -/*****************************************************/ +/* collect rx data from INT- and ISO-URBs */ static void collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) { hfcusb_data *hfc = fifo->hfc; int transp_mode, fifon; -#ifdef CONFIG_HISAX_DEBUG - int i; -#endif + fifon = fifo->fifonum; transp_mode = 0; if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS) - transp_mode = true; + transp_mode = 1; if (!fifo->skbuff) { fifo->skbuff = dev_alloc_skb(fifo->max_size + 3); if (!fifo->skbuff) { - printk(KERN_INFO - "HFC-S USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n", + printk(KERN_ERR + "HFC-S USB: cannot allocate buffer for fifo(%d)\n", fifon); return; } @@ -847,17 +797,11 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) if (fifo->skbuff->len + len < fifo->max_size) { memcpy(skb_put(fifo->skbuff, len), data, len); } else { -#ifdef CONFIG_HISAX_DEBUG - printk(KERN_INFO "HFC-S USB: "); - for (i = 0; i < 15; i++) - printk("%.2x ", - fifo->skbuff->data[fifo->skbuff-> - len - 15 + i]); - printk("\n"); -#endif - printk(KERN_INFO - "HCF-USB: got frame exceeded fifo->max_size:%d on fifo:%d\n", + DBG(HFCUSB_DBG_FIFO_ERR, + "HCF-USB: got frame exceeded fifo->max_size(%d) fifo(%d)", fifo->max_size, fifon); + DBG_SKB(HFCUSB_DBG_VERBOSE_USB, fifo->skbuff); + skb_trim(fifo->skbuff, 0); } } if (transp_mode && fifo->skbuff->len >= 128) { @@ -870,6 +814,13 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) if (finish) { if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) && (fifo->skbuff->len > 3)) { + + if (fifon == HFCUSB_D_RX) { + DBG(HFCUSB_DBG_DCHANNEL, + "HFC-S USB: D-RX len(%d)", fifo->skbuff->len); + DBG_SKB(HFCUSB_DBG_DCHANNEL, fifo->skbuff); + } + /* remove CRC & status */ skb_trim(fifo->skbuff, fifo->skbuff->len - 3); if (fifon == HFCUSB_PCM_RX) { @@ -882,39 +833,17 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) fifo->skbuff); fifo->skbuff = NULL; /* buffer was freed from upper layer */ } else { - if (fifo->skbuff->len > 3) { - printk(KERN_INFO - "HFC-S USB: got frame %d bytes but CRC ERROR on fifo:%d!!!\n", - fifo->skbuff->len, fifon); -#ifdef CONFIG_HISAX_DEBUG - if (debug > 1) { - printk(KERN_INFO "HFC-S USB: "); - for (i = 0; i < 15; i++) - printk("%.2x ", - fifo->skbuff-> - data[fifo->skbuff-> - len - 15 + i]); - printk("\n"); - } -#endif - } -#ifdef CONFIG_HISAX_DEBUG - else { - printk(KERN_INFO - "HFC-S USB: frame to small (%d bytes)!!!\n", - fifo->skbuff->len); - } -#endif + DBG(HFCUSB_DBG_FIFO_ERR, + "HFC-S USB: ERROR frame len(%d) fifo(%d)", + fifo->skbuff->len, fifon); + DBG_SKB(HFCUSB_DBG_VERBOSE_USB, fifo->skbuff); skb_trim(fifo->skbuff, 0); } } } -/***********************************************/ -/* receive completion routine for all rx fifos */ -/***********************************************/ static void -rx_complete(struct urb *urb) +rx_int_complete(struct urb *urb) { int len; int status; @@ -922,18 +851,14 @@ rx_complete(struct urb *urb) usb_fifo *fifo = (usb_fifo *) urb->context; hfcusb_data *hfc = fifo->hfc; static __u8 eof[8]; -#ifdef CONFIG_HISAX_DEBUG - __u8 i; -#endif urb->dev = hfc->dev; /* security init */ fifon = fifo->fifonum; if ((!fifo->active) || (urb->status)) { -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, "HFC-S USB: RX-Fifo %i is going down (%i)", + DBG(HFCUSB_DBG_INIT, "HFC-S USB: RX-Fifo %i is going down (%i)", fifon, urb->status); -#endif + fifo->urb->interval = 0; /* cancel automatic rescheduling */ if (fifo->skbuff) { dev_kfree_skb_any(fifo->skbuff); @@ -945,22 +870,20 @@ rx_complete(struct urb *urb) buf = fifo->buffer; maxlen = fifo->usb_packet_maxlen; -#ifdef CONFIG_HISAX_DEBUG - if ((fifon == 5) && (debug > 1)) { - printk(KERN_INFO - "HFC-S USB: INT-D-RX lst_urblen:%2d act_urblen:%2d max-urblen:%2d EOF:0x%0x DATA: ", - fifo->last_urblen, len, maxlen, eof[5]); - for (i = 0; i < len; i++) - printk("%.2x ", buf[i]); - printk("\n"); + if (fifon == HFCUSB_D_RX) { + DBG(HFCUSB_DBG_VERBOSE_USB, + "HFC-S USB: INT-D-RX lst_urblen:%2d " + "act_urblen:%2d max-urblen:%2d EOF:0x%0x", + fifo->last_urblen, len, maxlen, + eof[5]); + DBG_PACKET(HFCUSB_DBG_VERBOSE_USB, buf, len); } -#endif if (fifo->last_urblen != fifo->usb_packet_maxlen) { /* the threshold mask is in the 2nd status byte */ hfc->threshold_mask = buf[1]; /* the S0 state is in the upper half of the 1st status byte */ - state_handler(hfc, buf[0] >> 4); + s0_state_handler(hfc, buf[0] >> 4); eof[fifon] = buf[0] & 1; /* if we have more than the 2 status bytes -> collect data */ if (len > 2) @@ -975,20 +898,19 @@ rx_complete(struct urb *urb) status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { printk(KERN_INFO - "HFC-S USB: error resubmitting URN at rx_complete...\n"); + "HFC-S USB: %s error resubmitting URB fifo(%d)\n", + __FUNCTION__, fifon); } -} /* rx_complete */ +} -/***************************************************/ -/* start the interrupt transfer for the given fifo */ -/***************************************************/ +/* start initial INT-URB for certain fifo */ static void start_int_fifo(usb_fifo * fifo) { int errcode; - printk(KERN_INFO "HFC-S USB: starting intr IN fifo:%d\n", - fifo->fifonum); + DBG(HFCUSB_DBG_INIT, "HFC-S USB: starting RX INT-URB for fifo:%d\n", + fifo->fifonum); if (!fifo->urb) { fifo->urb = usb_alloc_urb(0, GFP_KERNEL); @@ -997,33 +919,28 @@ start_int_fifo(usb_fifo * fifo) } usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer, fifo->usb_packet_maxlen, - rx_complete, fifo, fifo->intervall); + rx_int_complete, fifo, fifo->intervall); fifo->active = 1; /* must be marked active */ errcode = usb_submit_urb(fifo->urb, GFP_KERNEL); if (errcode) { - printk(KERN_INFO + printk(KERN_ERR "HFC-S USB: submit URB error(start_int_info): status:%i\n", errcode); fifo->active = 0; fifo->skbuff = NULL; } -} /* start_int_fifo */ +} -/*****************************/ -/* set the B-channel mode */ -/*****************************/ static void -set_hfcmode(hfcusb_data * hfc, int channel, int mode) +setup_bchannel(hfcusb_data * hfc, int channel, int mode) { __u8 val, idx_table[2] = { 0, 2 }; if (hfc->disc_flag) { return; } -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, "HFC-S USB: setting channel %d to mode %d", channel, - mode); -#endif + DBG(HFCUSB_DBG_STATES, "HFC-S USB: setting channel %d to mode %d", + channel, mode); hfc->b_mode[channel] = mode; /* setup CON_HDLC */ @@ -1080,20 +997,17 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) switch (pr) { case PH_ACTIVATE | REQUEST: if (fifo->fifonum == HFCUSB_D_TX) { -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST"); -#endif + if (hfc->l1_state != 3 && hfc->l1_state != 7) { hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_DEACTIVATE | INDICATION sent (not state 3 or 7)"); -#endif } else { if (hfc->l1_state == 7) { /* l1 already active */ hfc->d_if.ifc.l1l2(&hfc-> @@ -1103,10 +1017,8 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) | INDICATION, NULL); -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_ACTIVATE | INDICATION sent again ;)"); -#endif } else { /* force sending sending INFO1 */ queue_control_request(hfc, @@ -1132,11 +1044,9 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) } } } else { -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, - "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST"); -#endif - set_hfcmode(hfc, + DBG(HFCUSB_DBG_STATES, + "HFC_USB: hfc_usb_d_l2l1 B-chan: PH_ACTIVATE | REQUEST"); + setup_bchannel(hfc, (fifo->fifonum == HFCUSB_B1_TX) ? 0 : 1, (long) arg); @@ -1147,18 +1057,12 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) break; case PH_DEACTIVATE | REQUEST: if (fifo->fifonum == HFCUSB_D_TX) { -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST"); -#endif - printk(KERN_INFO - "HFC-S USB: ISDN TE device should not deativate...\n"); } else { -#ifdef CONFIG_HISAX_DEBUG - DBG(ISDN_DBG, + DBG(HFCUSB_DBG_STATES, "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST"); -#endif - set_hfcmode(hfc, + setup_bchannel(hfc, (fifo->fifonum == HFCUSB_B1_TX) ? 0 : 1, (int) L1_MODE_NULL); @@ -1171,25 +1075,20 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) if (fifo->skbuff && fifo->delete_flg) { dev_kfree_skb_any(fifo->skbuff); fifo->skbuff = NULL; - fifo->delete_flg = false; + fifo->delete_flg = 0; } fifo->skbuff = arg; /* we have a new buffer */ break; default: - printk(KERN_INFO - "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n", - pr); + DBG(HFCUSB_DBG_STATES, + "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr); break; } } -/***************************************************************************/ -/* usb_init is called once when a new matching device is detected to setup */ -/* main parameters. It registers the driver at the main hisax module. */ -/* on success 0 is returned. */ -/***************************************************************************/ +/* initial init HFC-S USB chip registers, HiSax interface, USB URBs */ static int -usb_init(hfcusb_data * hfc) +hfc_usb_init(hfcusb_data * hfc) { usb_fifo *fifo; int i, err; @@ -1214,11 +1113,11 @@ usb_init(hfcusb_data * hfc) /* aux = output, reset off */ write_usb(hfc, HFCUSB_CIRM, 0x10); - /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */ + /* set USB_SIZE to match wMaxPacketSize for INT or BULK transfers */ write_usb(hfc, HFCUSB_USB_SIZE, (hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4)); - /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */ + /* set USB_SIZE_I to match wMaxPacketSize for ISO transfers */ write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size); /* enable PCM/GCI master mode */ @@ -1257,8 +1156,8 @@ usb_init(hfcusb_data * hfc) hfc->b_mode[0] = L1_MODE_NULL; hfc->b_mode[1] = L1_MODE_NULL; - hfc->l1_activated = false; - hfc->disc_flag = false; + hfc->l1_activated = 0; + hfc->disc_flag = 0; hfc->led_state = 0; hfc->led_new_data = 0; hfc->old_led_state = 0; @@ -1349,11 +1248,9 @@ usb_init(hfcusb_data * hfc) handle_led(hfc, LED_POWER_ON); return (0); -} /* usb_init */ +} -/*************************************************/ -/* function called to probe a new plugged device */ -/*************************************************/ +/* initial callback for each plugged USB device */ static int hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1378,11 +1275,6 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) } } -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n", ifnum, - iface->desc.bAlternateSetting, intf->minor); -#endif printk(KERN_INFO "HFC-S USB: probing interface(%d) actalt(%d) minor(%d)\n", ifnum, iface->desc.bAlternateSetting, intf->minor); @@ -1403,15 +1295,11 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) /* check for config EOL element */ while (validconf[cfg_used][0]) { - cfg_found = true; + cfg_found = 1; vcf = validconf[cfg_used]; /* first endpoint descriptor */ ep = iface->endpoint; -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-S USB: (if=%d alt=%d cfg_used=%d)\n", - ifnum, probe_alt_setting, cfg_used); -#endif + memcpy(cmptbl, vcf, 16 * sizeof(int)); /* check for all endpoints in this alternate setting */ @@ -1425,7 +1313,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) idx++; attr = ep->desc.bmAttributes; if (cmptbl[idx] == EP_NUL) { - cfg_found = false; + cfg_found = 0; } if (attr == USB_ENDPOINT_XFER_INT && cmptbl[idx] == EP_INT) @@ -1438,16 +1326,9 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) cmptbl[idx] = EP_NUL; /* check if all INT endpoints match minimum interval */ - if (attr == USB_ENDPOINT_XFER_INT - && ep->desc.bInterval < - vcf[17]) { -#ifdef CONFIG_HISAX_DEBUG - if (cfg_found) - DBG(USB_DBG, - "HFC-S USB: Interrupt Endpoint interval < %d found - skipping config", - vcf[17]); -#endif - cfg_found = false; + if ((attr == USB_ENDPOINT_XFER_INT) + && (ep->desc.bInterval < vcf[17])) { + cfg_found = 0; } ep++; } @@ -1455,7 +1336,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) /* all entries must be EP_NOP or EP_NUL for a valid config */ if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL) - cfg_found = false; + cfg_found = 0; } if (cfg_found) { if (cfg_used < small_match) { @@ -1464,23 +1345,16 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) probe_alt_setting; iface_used = iface; } -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-USB: small_match=%x %x\n", - small_match, alt_used); -#endif } cfg_used++; } alt_idx++; - } /* (alt_idx < intf->num_altsetting) */ + } /* (alt_idx < intf->num_altsetting) */ /* found a valid USB Ta Endpint config */ if (small_match != 0xffff) { iface = iface_used; - if (! - (context = - kzalloc(sizeof(hfcusb_data), GFP_KERNEL))) + if (!(context = kzalloc(sizeof(hfcusb_data), GFP_KERNEL))) return (-ENOMEM); /* got no mem */ ep = iface->endpoint; @@ -1613,20 +1487,15 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) driver_info; printk(KERN_INFO "HFC-S USB: detected \"%s\"\n", driver_info->vend_name); -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d)\n", + + DBG(HFCUSB_DBG_INIT, + "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d), E-Channel(%d)", conf_str[small_match], context->if_used, - context->alt_used); - printk(KERN_INFO - "HFC-S USB: E-channel (\"ECHO:\") logging "); - if (validconf[small_match][18]) - printk(" possible\n"); - else - printk("NOT possible\n"); -#endif + context->alt_used, + validconf[small_match][18]); + /* init the chip and register the driver */ - if (usb_init(context)) { + if (hfc_usb_init(context)) { usb_kill_urb(context->ctrl_urb); usb_free_urb(context->ctrl_urb); context->ctrl_urb = NULL; @@ -1643,17 +1512,19 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) return (-EIO); } -/****************************************************/ -/* function called when an active device is removed */ -/****************************************************/ +/* callback for unplugged USB device */ static void hfc_usb_disconnect(struct usb_interface *intf) { hfcusb_data *context = usb_get_intfdata(intf); int i; + + handle_led(context, LED_POWER_OFF); + schedule_timeout((10 * HZ) / 1000); + printk(KERN_INFO "HFC-S USB: device disconnect\n"); - context->disc_flag = true; + context->disc_flag = 1; usb_set_intfdata(intf, NULL); if (!context) return; @@ -1661,25 +1532,22 @@ hfc_usb_disconnect(struct usb_interface del_timer(&context->t3_timer); if (timer_pending(&context->t4_timer)) del_timer(&context->t4_timer); + /* tell all fifos to terminate */ for (i = 0; i < HFCUSB_NUM_FIFOS; i++) { if (context->fifos[i].usb_transfer_mode == USB_ISOC) { if (context->fifos[i].active > 0) { stop_isoc_chain(&context->fifos[i]); -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-S USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i", - i); -#endif + DBG(HFCUSB_DBG_INIT, + "HFC-S USB: %s stopping ISOC chain Fifo(%i)", + __FUNCTION__, i); } } else { if (context->fifos[i].active > 0) { context->fifos[i].active = 0; -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, - "HFC-S USB: hfc_usb_disconnect: unlinking URB for Fifo no %i", - i); -#endif + DBG(HFCUSB_DBG_INIT, + "HFC-S USB: %s unlinking URB for Fifo(%i)", + __FUNCTION__, i); } usb_kill_urb(context->fifos[i].urb); usb_free_urb(context->fifos[i].urb); @@ -1692,34 +1560,29 @@ hfc_usb_disconnect(struct usb_interface context->ctrl_urb = NULL; hisax_unregister(&context->d_if); kfree(context); /* free our structure again */ -} /* hfc_usb_disconnect */ +} -/************************************/ -/* our driver information structure */ -/************************************/ static struct usb_driver hfc_drv = { .name = "hfc_usb", .id_table = hfcusb_idtab, .probe = hfc_usb_probe, .disconnect = hfc_usb_disconnect, }; + static void __exit -hfc_usb_exit(void) +hfc_usb_mod_exit(void) { -#ifdef CONFIG_HISAX_DEBUG - DBG(USB_DBG, "HFC-S USB: calling \"hfc_usb_exit\" ..."); -#endif - usb_deregister(&hfc_drv); /* release our driver */ + usb_deregister(&hfc_drv); /* release our driver */ printk(KERN_INFO "HFC-S USB: module removed\n"); } static int __init -hfc_usb_init(void) +hfc_usb_mod_init(void) { + char revstr[30], datestr[30], dummy[30]; #ifndef CONFIG_HISAX_DEBUG - unsigned int debug = -1; + hfc_debug = debug; #endif - char revstr[30], datestr[30], dummy[30]; sscanf(hfcusb_revision, "%s %s $ %s %s %s $ ", dummy, revstr, dummy, datestr, dummy); @@ -1734,8 +1597,8 @@ hfc_usb_init(void) return (0); } -module_init(hfc_usb_init); -module_exit(hfc_usb_exit); +module_init(hfc_usb_mod_init); +module_exit(hfc_usb_mod_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h index 471f2354dfde..e79f56568d30 100644 --- a/drivers/isdn/hisax/hfc_usb.h +++ b/drivers/isdn/hisax/hfc_usb.h @@ -1,8 +1,8 @@ /* -* hfc_usb.h -* -* $Id: hfc_usb.h,v 4.2 2005/04/07 15:27:17 martinb1 Exp $ -*/ + * hfc_usb.h + * + * $Id: hfc_usb.h,v 1.1.2.5 2007/08/20 14:36:03 mbachem Exp $ + */ #ifndef __HFC_USB_H__ #define __HFC_USB_H__ @@ -10,25 +10,20 @@ #define DRIVER_AUTHOR "Peter Sprenger (sprenger@moving-byters.de)" #define DRIVER_DESC "HFC-S USB based HiSAX ISDN driver" -#define VERBOSE_USB_DEBUG +#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ +#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */ +#define HFC_TIMER_T4 500 /* time for state change interval */ -/***********/ -/* defines */ -/***********/ -#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ -#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */ -#define HFC_TIMER_T4 500 /* time for state change interval */ +#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ +#define HFCUSB_L1_DRX 1 /* D-frame received */ +#define HFCUSB_L1_ERX 2 /* E-frame received */ +#define HFCUSB_L1_DTX 4 /* D-frames completed */ -#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ -#define HFCUSB_L1_DRX 1 /* D-frame received */ -#define HFCUSB_L1_ERX 2 /* E-frame received */ -#define HFCUSB_L1_DTX 4 /* D-frames completed */ +#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ -#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ - -#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ -#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ +#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ +#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ #define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ #define HFCUSB_CIRM 0x00 /* cirm register index */ @@ -52,9 +47,8 @@ #define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */ -/******************/ + /* fifo registers */ -/******************/ #define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ #define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ #define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ @@ -66,9 +60,9 @@ #define HFCUSB_PCM_RX 7 /* -* used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just -* supports ISO out, while the Cologne Chip EVAL TA just supports BULK out -*/ + * used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just + * supports ISO out, while the Cologne Chip EVAL TA just supports BULK out + */ #define USB_INT 0 #define USB_BULK 1 #define USB_ISOC 2 @@ -77,49 +71,36 @@ #define ISOC_PACKETS_B 8 #define ISO_BUFFER_SIZE 128 -// ISO send definitions +/* Fifo flow Control for TX ISO */ #define SINK_MAX 68 #define SINK_MIN 48 #define SINK_DMIN 12 #define SINK_DMAX 18 #define BITLINE_INF (-64*8) - -/**********/ -/* macros */ -/**********/ +/* HFC-S USB register access by Control-URSs */ #define write_usb(a,b,c)usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT) #define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT) - - -/*******************/ -/* Debugging Flags */ -/*******************/ -#define USB_DBG 1 -#define ISDN_DBG 2 - - -/* *********************/ -/* USB related defines */ -/***********************/ #define HFC_CTRL_BUFSIZE 32 - - -/*************************************************/ /* entry and size of output/input control buffer */ -/*************************************************/ typedef struct { __u8 hfc_reg; /* register number */ __u8 reg_val; /* value to be written (or read) */ int action; /* data for action handler */ } ctrl_buft; +/* Debugging Flags */ +#define HFCUSB_DBG_INIT 0x0001 +#define HFCUSB_DBG_STATES 0x0002 +#define HFCUSB_DBG_DCHANNEL 0x0080 +#define HFCUSB_DBG_FIFO_ERR 0x4000 +#define HFCUSB_DBG_VERBOSE_USB 0x8000 -/********************/ -/* URB error codes: */ -/********************/ -/* Used to represent a list of values and their respective symbolic names */ +/* + * URB error codes: + * Used to represent a list of values and their respective symbolic names + */ struct hfcusb_symbolic_list { const int num; const char *name; @@ -134,20 +115,20 @@ static struct hfcusb_symbolic_list urb_errlist[] = { {-ENXIO, "URB already queued"}, {-EFBIG, "Too much ISO frames requested"}, {-ENOSR, "Buffer error (overrun)"}, - {-EPIPE, "Specified endpoint is stalled"}, + {-EPIPE, "Specified endpoint is stalled (device not responding)"}, {-EOVERFLOW, "Babble (bad cable?)"}, {-EPROTO, "Bit-stuff error (bad cable?)"}, - {-EILSEQ, "CRC or missing token"}, - {-ETIME, "Device did not respond"}, + {-EILSEQ, "CRC/Timeout"}, + {-ETIMEDOUT, "NAK (device does not respond)"}, {-ESHUTDOWN, "Device unplugged"}, {-1, NULL} }; -/*****************************************************/ -/* device dependant information to support different */ -/* ISDN Ta's using the HFC-S USB chip */ -/*****************************************************/ +/* + * device dependant information to support different + * ISDN Ta's using the HFC-S USB chip + */ /* USB descriptor need to contain one of the following EndPoint combination: */ #define CNF_4INT3ISO 1 // 4 INT IN, 3 ISO OUT @@ -155,16 +136,19 @@ static struct hfcusb_symbolic_list urb_errlist[] = { #define CNF_4ISO3ISO 3 // 4 ISO IN, 3 ISO OUT #define CNF_3ISO3ISO 4 // 3 ISO IN, 3 ISO OUT -#define EP_NUL 1 // Endpoint at this position not allowed -#define EP_NOP 2 // all type of endpoints allowed at this position -#define EP_ISO 3 // Isochron endpoint mandatory at this position -#define EP_BLK 4 // Bulk endpoint mandatory at this position -#define EP_INT 5 // Interrupt endpoint mandatory at this position +#define EP_NUL 1 // Endpoint at this position not allowed +#define EP_NOP 2 // all type of endpoints allowed at this position +#define EP_ISO 3 // Isochron endpoint mandatory at this position +#define EP_BLK 4 // Bulk endpoint mandatory at this position +#define EP_INT 5 // Interrupt endpoint mandatory at this position -/* this array represents all endpoints possible in the HCF-USB the last -* 3 entries are the configuration number, the minimum interval for -* Interrupt endpoints & boolean if E-channel logging possible -*/ +/* + * List of all supported endpoint configuration sets, used to find the + * best matching endpoint configuration within a devices' USB descriptor. + * We need at least 3 RX endpoints, and 3 TX endpoints, either + * INT-in and ISO-out, or ISO-in and ISO-out) + * with 4 RX endpoints even E-Channel logging is possible + */ static int validconf[][19] = { // INT in, ISO out config {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT, @@ -193,7 +177,6 @@ static char *conf_str[] = { }; #endif - typedef struct { int vendor; // vendor id int prod_id; // product id @@ -202,9 +185,9 @@ typedef struct { signed short led_bits[8]; // array of 8 possible LED bitmask settings } vendor_data; -#define LED_OFF 0 // no LED support -#define LED_SCHEME1 1 // LED standard scheme -#define LED_SCHEME2 2 // not used yet... +#define LED_OFF 0 // no LED support +#define LED_SCHEME1 1 // LED standard scheme +#define LED_SCHEME2 2 // not used yet... #define LED_POWER_ON 1 #define LED_POWER_OFF 2 @@ -217,11 +200,8 @@ typedef struct { #define LED_B2_OFF 9 #define LED_B2_DATA 10 -#define LED_NORMAL 0 // LEDs are normal -#define LED_INVERTED 1 // LEDs are inverted - -/* time in ms to perform a Flashing LED when B-Channel has traffic */ -#define LED_TIME 250 +#define LED_NORMAL 0 // LEDs are normal +#define LED_INVERTED 1 // LEDs are inverted -#endif // __HFC_USB_H__ +#endif // __HFC_USB_H__ -- cgit v1.2.3