From ad5042ecbe944bd34d0bdd23f3b728a7e92c0e12 Mon Sep 17 00:00:00 2001 From: Yong Wu Date: Wed, 8 Dec 2021 14:07:42 +0200 Subject: iommu/mediatek: Remove the power status checking in tlb flush all To simplify the code, Remove the power status checking in the tlb_flush_all, remove this: if (pm_runtime_get_if_in_use(data->dev) <= 0) continue; The mtk_iommu_tlb_flush_all is called from a) isr b) tlb flush range fail case c) iommu_create_device_direct_mappings In first two cases, the power and clock are always enabled. In the third case tlb flush is unnecessary because in a later patch in the series a full flush from the pm_runtime_resume callback is added. In addition, writing the tlb control register when the iommu is not resumed is ok and the write is ignored. Signed-off-by: Yong Wu [refactor commit log] Signed-off-by: Dafna Hirschfeld Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20211208120744.2415-4-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel --- drivers/iommu/mtk_iommu.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/iommu') diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index bcf1f5e11fbd..7cdf2819f4b7 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -210,15 +210,10 @@ static struct mtk_iommu_domain *to_mtk_domain(struct iommu_domain *dom) static void mtk_iommu_tlb_flush_all(struct mtk_iommu_data *data) { - if (pm_runtime_get_if_in_use(data->dev) <= 0) - return; - writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0, data->base + data->plat_data->inv_sel_reg); writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE); wmb(); /* Make sure the tlb flush all done */ - - pm_runtime_put(data->dev); } static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, -- cgit v1.2.3