From c1e62062ff5477f3cd40e956fb1c18808cc894a4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 28 Apr 2020 19:29:18 +0200 Subject: iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these systems the first I2cSerialBus ACPI-resource points to the SMBus Alert Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource points to the actual CM3218 sensor address: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBusV2 (0x000C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2C3", 0x00, ResourceConsumer, , Exclusive, ) I2cSerialBusV2 (0x0048, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2C3", 0x00, ResourceConsumer, , Exclusive, ) Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, ) { 0x00000033, } }) Return (SBUF) /* \_SB_.I2C3.ALSD._CRS.SBUF */ } Detect this and take the following step to deal with it: 1. When a SMBus Alert capable sensor has an Alert asserted, it will not respond on its actual I2C address. Read a byte from the ARA to clear any pending Alerts. 2. Create a "dummy" client for the actual I2C address and use that client to communicate with the sensor. Signed-off-by: Hans de Goede Signed-off-by: Jonathan Cameron --- drivers/iio/light/cm32181.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/iio') diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c index a02ec59f2a94..84a5e3927558 100644 --- a/drivers/iio/light/cm32181.c +++ b/drivers/iio/light/cm32181.c @@ -52,6 +52,8 @@ #define CM32181_CALIBSCALE_RESOLUTION 1000 #define MLUX_PER_LUX 1000 +#define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c + static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = { CM32181_REG_ADDR_CMD, }; @@ -336,6 +338,26 @@ static int cm32181_probe(struct i2c_client *client) if (!indio_dev) return -ENOMEM; + /* + * Some ACPI systems list 2 I2C resources for the CM3218 sensor, the + * SMBus Alert Response Address (ARA, 0x0c) and the actual I2C address. + * Detect this and take the following step to deal with it: + * 1. When a SMBus Alert capable sensor has an Alert asserted, it will + * not respond on its actual I2C address. Read a byte from the ARA + * to clear any pending Alerts. + * 2. Create a "dummy" client for the actual I2C address and + * use that client to communicate with the sensor. + */ + if (ACPI_HANDLE(dev) && client->addr == SMBUS_ALERT_RESPONSE_ADDRESS) { + struct i2c_board_info board_info = { .type = "dummy" }; + + i2c_smbus_read_byte(client); + + client = i2c_acpi_new_device(dev, 1, &board_info); + if (IS_ERR(client)) + return PTR_ERR(client); + } + cm32181 = iio_priv(indio_dev); cm32181->client = client; -- cgit v1.2.3