From 89a86da5cb8e0ee153111fb68a719d31582c206b Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Mon, 6 Sep 2021 09:56:28 +0300 Subject: iio: adc: ad7192: Add IRQ flag IRQ type in ad_sigma_delta_info struct was missing. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7192 datasheet: "The DOUT/RDY falling edge can be used as an interrupt to a processor," Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici Cc: Link: https://lore.kernel.org/r/20210906065630.16325-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7192.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index ee8ed9481025..2121a812b0c3 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -293,6 +293,7 @@ static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), + .irq_flags = IRQF_TRIGGER_FALLING, }; static const struct ad_sd_calib_data ad7192_calib_arr[8] = { -- cgit v1.2.3