From 53eaa9c27fdc01b4f4d885223e29f97393409e7e Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Tue, 26 Nov 2019 17:19:12 +0100 Subject: iio: imu: inv_mpu6050: fix temperature reporting using bad unit Temperature should be reported in milli-degrees, not degrees. Fix scale and offset values to use the correct unit. This is a fix for an issue that has been present for a long time. The fixes tag reflects the point at which the code last changed in a fashion that would make this fix patch no longer apply. Backports will be necessary to fix those elements that predate that patch. Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 23 ++++++++++++----------- drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 16 ++++++++++++---- 2 files changed, 24 insertions(+), 15 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 45e77b308238..0686e41bb8a1 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -117,6 +117,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6050, .config = &chip_config_6050, .fifo_size = 1024, + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE}, }, { .whoami = INV_MPU6500_WHOAMI_VALUE, @@ -124,6 +125,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, .fifo_size = 512, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, { .whoami = INV_MPU6515_WHOAMI_VALUE, @@ -131,6 +133,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, .fifo_size = 512, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, { .whoami = INV_MPU6000_WHOAMI_VALUE, @@ -138,6 +141,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6050, .config = &chip_config_6050, .fifo_size = 1024, + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE}, }, { .whoami = INV_MPU9150_WHOAMI_VALUE, @@ -145,6 +149,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6050, .config = &chip_config_6050, .fifo_size = 1024, + .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE}, }, { .whoami = INV_MPU9250_WHOAMI_VALUE, @@ -152,6 +157,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, .fifo_size = 512, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, { .whoami = INV_MPU9255_WHOAMI_VALUE, @@ -159,6 +165,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, .fifo_size = 512, + .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE}, }, { .whoami = INV_ICM20608_WHOAMI_VALUE, @@ -166,6 +173,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, .fifo_size = 512, + .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE}, }, { .whoami = INV_ICM20602_WHOAMI_VALUE, @@ -173,6 +181,7 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_icm20602, .config = &chip_config_6050, .fifo_size = 1008, + .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE}, }, }; @@ -481,12 +490,8 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: - *val = 0; - if (st->chip_type == INV_ICM20602) - *val2 = INV_ICM20602_TEMP_SCALE; - else - *val2 = INV_MPU6050_TEMP_SCALE; - + *val = st->hw->temp.scale / 1000000; + *val2 = st->hw->temp.scale % 1000000; return IIO_VAL_INT_PLUS_MICRO; case IIO_MAGN: return inv_mpu_magn_get_scale(st, chan, val, val2); @@ -496,11 +501,7 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_OFFSET: switch (chan->type) { case IIO_TEMP: - if (st->chip_type == INV_ICM20602) - *val = INV_ICM20602_TEMP_OFFSET; - else - *val = INV_MPU6050_TEMP_OFFSET; - + *val = st->hw->temp.offset; return IIO_VAL_INT; default: return -EINVAL; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index f1fb7b6bdab1..b096e010d4ee 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -107,6 +107,7 @@ struct inv_mpu6050_chip_config { * @reg: register map of the chip. * @config: configuration of the chip. * @fifo_size: size of the FIFO in bytes. + * @temp: offset and scale to apply to raw temperature. */ struct inv_mpu6050_hw { u8 whoami; @@ -114,6 +115,10 @@ struct inv_mpu6050_hw { const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_chip_config *config; size_t fifo_size; + struct { + int offset; + int scale; + } temp; }; /* @@ -279,16 +284,19 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_UP_TIME_MIN 5000 #define INV_MPU6050_REG_UP_TIME_MAX 10000 -#define INV_MPU6050_TEMP_OFFSET 12421 -#define INV_MPU6050_TEMP_SCALE 2941 +#define INV_MPU6050_TEMP_OFFSET 12420 +#define INV_MPU6050_TEMP_SCALE 2941176 #define INV_MPU6050_MAX_GYRO_FS_PARAM 3 #define INV_MPU6050_MAX_ACCL_FS_PARAM 3 #define INV_MPU6050_THREE_AXIS 3 #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3 #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3 -#define INV_ICM20602_TEMP_OFFSET 8170 -#define INV_ICM20602_TEMP_SCALE 3060 +#define INV_MPU6500_TEMP_OFFSET 7011 +#define INV_MPU6500_TEMP_SCALE 2995178 + +#define INV_ICM20608_TEMP_OFFSET 8170 +#define INV_ICM20608_TEMP_SCALE 3059976 /* 6 + 6 + 7 (for MPU9x50) = 19 round up to 24 and plus 8 */ #define INV_MPU6050_OUTPUT_DATA_SIZE 32 -- cgit v1.2.3 From 5685b145c138b2ca696076106d0fb87b7b90b14a Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Thu, 28 Nov 2019 17:55:18 +0200 Subject: iio: imu: st_lsm6dsx: fix decimation factor estimation Fix decimation factor and sip estimation for LSM6DSM series (max value for decimation factor is 32). If gyro and accel sensors are enabled at 12.5Hz and 416Hz respectively, decimation factor lookup will fail, producing unaligned data. Remove unused decimator filed in st_lsm6dsx_sensor structure. Fixes: f8710f0357bc ("iio: imu: st_lsm6dsx: express odr in mHZ") Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 -- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 25 ++++++++++++++++++------- 2 files changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index c605b153be41..510c4bd4a785 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -320,7 +320,6 @@ enum st_lsm6dsx_fifo_mode { * @odr: Output data rate of the sensor [Hz]. * @watermark: Sensor watermark level. * @sip: Number of samples in a given pattern. - * @decimator: FIFO decimation factor. * @ts_ref: Sensor timestamp reference for hw one. * @ext_info: Sensor settings if it is connected to i2c controller */ @@ -334,7 +333,6 @@ struct st_lsm6dsx_sensor { u16 watermark; u8 sip; - u8 decimator; s64 ts_ref; struct { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index d416990ae309..a70b04f14187 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -78,14 +78,20 @@ struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = { { 32, 0x7 }, }; -static int st_lsm6dsx_get_decimator_val(u8 val) +static int +st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr) { const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table); + u32 decimator = max_odr / sensor->odr; int i; - for (i = 0; i < max_size; i++) - if (st_lsm6dsx_decimator_table[i].decimator == val) + if (decimator > 1) + decimator = round_down(decimator, 2); + + for (i = 0; i < max_size; i++) { + if (st_lsm6dsx_decimator_table[i].decimator == decimator) break; + } return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val; } @@ -111,6 +117,13 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw, } } +static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr) +{ + u8 sip = sensor->odr / min_odr; + + return sip > 1 ? round_down(sip, 2) : sip; +} + static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) { const struct st_lsm6dsx_reg *ts_dec_reg; @@ -131,12 +144,10 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) sensor = iio_priv(hw->iio_devs[i]); /* update fifo decimators and sample in pattern */ if (hw->enable_mask & BIT(sensor->id)) { - sensor->sip = sensor->odr / min_odr; - sensor->decimator = max_odr / sensor->odr; - data = st_lsm6dsx_get_decimator_val(sensor->decimator); + sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr); + data = st_lsm6dsx_get_decimator_val(sensor, max_odr); } else { sensor->sip = 0; - sensor->decimator = 0; data = 0; } ts_sip = max_t(u16, ts_sip, sensor->sip); -- cgit v1.2.3 From c2686eb2aed322c642b5a291d5b9d67fe4301d4a Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Thu, 28 Nov 2019 17:42:30 +0200 Subject: iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask Track hw FIFO state introducing fifo_mask since now the accel sensor can be enabled during suspend/resume in order to trigger the wake-up enabling the FIFO in st_lsm6dsx_resume even if it was disabled before the suspend. Hence we must separately track the fifo state. Fixes: 4c997dfa692d ("iio: imu: st_lsm6dsx: add wakeup-source option") Signed-off-by: Lorenzo Bianconi Tested-by: Sean Nyekjaer Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 25 ++++++++++++++----------- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++-- 3 files changed, 18 insertions(+), 15 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 510c4bd4a785..dc55d7dff3eb 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -349,9 +349,9 @@ struct st_lsm6dsx_sensor { * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. * @conf_lock: Mutex to prevent concurrent FIFO configuration update. * @page_lock: Mutex to prevent concurrent memory page configuration. - * @fifo_mode: FIFO operating mode supported by the device. * @suspend_mask: Suspended sensor bitmask. * @enable_mask: Enabled sensor bitmask. + * @fifo_mask: Enabled hw FIFO bitmask. * @ts_gain: Hw timestamp rate after internal calibration. * @ts_sip: Total number of timestamp samples in a given pattern. * @sip: Total number of samples (acc/gyro/ts) in a given pattern. @@ -371,9 +371,9 @@ struct st_lsm6dsx_hw { struct mutex conf_lock; struct mutex page_lock; - enum st_lsm6dsx_fifo_mode fifo_mode; u8 suspend_mask; u8 enable_mask; + u8 fifo_mask; s64 ts_gain; u8 ts_sip; u8 sip; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index a70b04f14187..cb536b81a1c2 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -187,17 +187,10 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, enum st_lsm6dsx_fifo_mode fifo_mode) { unsigned int data; - int err; data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode); - err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR, - ST_LSM6DSX_FIFO_MODE_MASK, data); - if (err < 0) - return err; - - hw->fifo_mode = fifo_mode; - - return 0; + return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR, + ST_LSM6DSX_FIFO_MODE_MASK, data); } static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor, @@ -619,11 +612,17 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) { struct st_lsm6dsx_hw *hw = sensor->hw; + u8 fifo_mask; int err; mutex_lock(&hw->conf_lock); - if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) { + if (enable) + fifo_mask = hw->fifo_mask | BIT(sensor->id); + else + fifo_mask = hw->fifo_mask & ~BIT(sensor->id); + + if (hw->fifo_mask) { err = st_lsm6dsx_flush_fifo(hw); if (err < 0) goto out; @@ -653,15 +652,19 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable) if (err < 0) goto out; - if (hw->enable_mask) { + if (fifo_mask) { /* reset hw ts counter */ err = st_lsm6dsx_reset_hw_ts(hw); if (err < 0) goto out; err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT); + if (err < 0) + goto out; } + hw->fifo_mask = fifo_mask; + out: mutex_unlock(&hw->conf_lock); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 11b2c7bc8041..6f628c3cd133 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -2300,7 +2300,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) hw->suspend_mask |= BIT(sensor->id); } - if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) + if (hw->fifo_mask) err = st_lsm6dsx_flush_fifo(hw); return err; @@ -2336,7 +2336,7 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev) hw->suspend_mask &= ~BIT(sensor->id); } - if (hw->enable_mask) + if (hw->fifo_mask) err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT); return err; -- cgit v1.2.3 From bd41c445b7b96e46efb799ff33bdf870479488cf Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 29 Nov 2019 11:37:24 +0200 Subject: iio: imu: st_lsm6dsx: do not power-off accel if events are enabled Do not power-off accel unconditionally if wake-up events are enabled powering off the hw FIFO. At the same time do not power-off the accel sensor if it is 'batched' in the hw FIFO disabling sensor events Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events") Tested-by: Sean Nyekjaer Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 30 ++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 6f628c3cd133..a7d40c02ce6b 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -1447,8 +1447,9 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr) return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); } -int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, - bool enable) +static int +__st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) { struct st_lsm6dsx_hw *hw = sensor->hw; u32 odr = enable ? sensor->odr : 0; @@ -1466,6 +1467,26 @@ int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, return 0; } +static int +st_lsm6dsx_check_events(struct st_lsm6dsx_sensor *sensor, bool enable) +{ + struct st_lsm6dsx_hw *hw = sensor->hw; + + if (sensor->id == ST_LSM6DSX_ID_GYRO || enable) + return 0; + + return hw->enable_event; +} + +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + if (st_lsm6dsx_check_events(sensor, enable)) + return 0; + + return __st_lsm6dsx_sensor_set_enable(sensor, enable); +} + static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, u8 addr, int *val) { @@ -1661,7 +1682,7 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev, struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); struct st_lsm6dsx_hw *hw = sensor->hw; u8 enable_event; - int err = 0; + int err; if (type != IIO_EV_TYPE_THRESH) return -EINVAL; @@ -1689,7 +1710,8 @@ st_lsm6dsx_write_event_config(struct iio_dev *iio_dev, return err; mutex_lock(&hw->conf_lock); - err = st_lsm6dsx_sensor_set_enable(sensor, state); + if (enable_event || !(hw->fifo_mask & BIT(sensor->id))) + err = __st_lsm6dsx_sensor_set_enable(sensor, state); mutex_unlock(&hw->conf_lock); if (err < 0) return err; -- cgit v1.2.3