From 739aff87a8176c1193cc46ebce5ce6dd537501af Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:28 +0100 Subject: iio: imu: st_lsm6dsx: introduce locked read/write utility routines Add st_lsm6dsx_update_bits_locked, st_lsm6dsx_read_locked and st_lsm6dsx_write_locked utility routines in order to guarantee the bus access is atomic respect to reg page configuration. This is a preliminary patch to add i2c sensor hub support since i2c master registers are accessed through a reg page multiplexer Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 41 +++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 63 ++++++++++++++------------ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 24 ++++++---- 3 files changed, 90 insertions(+), 38 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index ef73519a0fb6..ec204d3b4b1f 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -148,6 +148,7 @@ struct st_lsm6dsx_sensor { * @irq: Device interrupt line (I2C or SPI). * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. * @conf_lock: Mutex to prevent concurrent FIFO configuration update. + * @page_lock: Mutex to prevent concurrent memory page configuration. * @fifo_mode: FIFO operating mode supported by the device. * @enable_mask: Enabled sensor bitmask. * @ts_sip: Total number of timestamp samples in a given pattern. @@ -163,6 +164,7 @@ struct st_lsm6dsx_hw { struct mutex fifo_lock; struct mutex conf_lock; + struct mutex page_lock; enum st_lsm6dsx_fifo_mode fifo_mode; u8 enable_mask; @@ -192,4 +194,43 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val); +static inline int +st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, + unsigned int mask, unsigned int val) +{ + int err; + + mutex_lock(&hw->page_lock); + err = regmap_update_bits(hw->regmap, addr, mask, val); + mutex_unlock(&hw->page_lock); + + return err; +} + +static inline int +st_lsm6dsx_read_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, + void *val, unsigned int len) +{ + int err; + + mutex_lock(&hw->page_lock); + err = regmap_bulk_read(hw->regmap, addr, val, len); + mutex_unlock(&hw->page_lock); + + return err; +} + +static inline int +st_lsm6dsx_write_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, + unsigned int val) +{ + int err; + + mutex_lock(&hw->page_lock); + err = regmap_write(hw->regmap, addr, val); + mutex_unlock(&hw->page_lock); + + return err; +} + #endif /* ST_LSM6DSX_H */ diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index b5263fc522ca..67cd36bce772 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -142,8 +142,9 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) if (dec_reg->addr) { int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask); - err = regmap_update_bits(hw->regmap, dec_reg->addr, - dec_reg->mask, val); + err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr, + dec_reg->mask, + val); if (err < 0) return err; } @@ -162,8 +163,8 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) int val, ts_dec = !!hw->ts_sip; val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask); - err = regmap_update_bits(hw->regmap, ts_dec_reg->addr, - ts_dec_reg->mask, val); + err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr, + ts_dec_reg->mask, val); } return err; } @@ -171,12 +172,12 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, enum st_lsm6dsx_fifo_mode fifo_mode) { + unsigned int data; int err; - err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_FIFO_MODE_ADDR, - ST_LSM6DSX_FIFO_MODE_MASK, - FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, - fifo_mode)); + data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode); + err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR, + ST_LSM6DSX_FIFO_MODE_MASK, data); if (err < 0) return err; @@ -207,15 +208,15 @@ static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor, data = 0; } val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask); - return regmap_update_bits(hw->regmap, batch_reg->addr, - batch_reg->mask, val); + return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr, + batch_reg->mask, val); } else { data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0; - return regmap_update_bits(hw->regmap, - ST_LSM6DSX_REG_FIFO_MODE_ADDR, - ST_LSM6DSX_FIFO_ODR_MASK, - FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK, - data)); + return st_lsm6dsx_update_bits_locked(hw, + ST_LSM6DSX_REG_FIFO_MODE_ADDR, + ST_LSM6DSX_FIFO_ODR_MASK, + FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK, + data)); } } @@ -246,19 +247,23 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark) fifo_watermark = (fifo_watermark / hw->sip) * hw->sip; fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl; + mutex_lock(&hw->page_lock); err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1, &data); if (err < 0) - return err; + goto out; fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask; fifo_watermark = ((data << 8) & ~fifo_th_mask) | (fifo_watermark & fifo_th_mask); wdata = cpu_to_le16(fifo_watermark); - return regmap_bulk_write(hw->regmap, - hw->settings->fifo_ops.fifo_th.addr, - &wdata, sizeof(wdata)); + err = regmap_bulk_write(hw->regmap, + hw->settings->fifo_ops.fifo_th.addr, + &wdata, sizeof(wdata)); +out: + mutex_unlock(&hw->page_lock); + return err; } static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw) @@ -267,8 +272,8 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw) int i, err; /* reset hw ts counter */ - err = regmap_write(hw->regmap, ST_LSM6DSX_REG_TS_RESET_ADDR, - ST_LSM6DSX_TS_RESET_VAL); + err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR, + ST_LSM6DSX_TS_RESET_VAL); if (err < 0) return err; @@ -297,8 +302,8 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr, while (read_len < data_len) { word_len = min_t(unsigned int, data_len - read_len, max_word_len); - err = regmap_bulk_read(hw->regmap, addr, data + read_len, - word_len); + err = st_lsm6dsx_read_locked(hw, addr, data + read_len, + word_len); if (err < 0) return err; read_len += word_len; @@ -328,9 +333,9 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) __le16 fifo_status; s64 ts = 0; - err = regmap_bulk_read(hw->regmap, - hw->settings->fifo_ops.fifo_diff.addr, - &fifo_status, sizeof(fifo_status)); + err = st_lsm6dsx_read_locked(hw, + hw->settings->fifo_ops.fifo_diff.addr, + &fifo_status, sizeof(fifo_status)); if (err < 0) { dev_err(hw->dev, "failed to read fifo status (err=%d)\n", err); @@ -455,9 +460,9 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) __le16 fifo_status; s64 ts = 0; - err = regmap_bulk_read(hw->regmap, - hw->settings->fifo_ops.fifo_diff.addr, - &fifo_status, sizeof(fifo_status)); + err = st_lsm6dsx_read_locked(hw, + hw->settings->fifo_ops.fifo_diff.addr, + &fifo_status, sizeof(fifo_status)); if (err < 0) { dev_err(hw->dev, "failed to read fifo status (err=%d)\n", err); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 2ad3c610e4b6..c8b993bea757 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -421,6 +421,7 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor, { struct st_lsm6dsx_hw *hw = sensor->hw; const struct st_lsm6dsx_reg *reg; + unsigned int data; int i, err; u8 val; @@ -433,8 +434,8 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor, val = st_lsm6dsx_fs_table[sensor->id].fs_avl[i].val; reg = &st_lsm6dsx_fs_table[sensor->id].reg; - err = regmap_update_bits(hw->regmap, reg->addr, reg->mask, - ST_LSM6DSX_SHIFT_VAL(val, reg->mask)); + data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask); + err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); if (err < 0) return err; @@ -463,6 +464,7 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) { struct st_lsm6dsx_hw *hw = sensor->hw; const struct st_lsm6dsx_reg *reg; + unsigned int data; int err; u8 val; @@ -471,8 +473,8 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) return err; reg = &st_lsm6dsx_odr_table[sensor->id].reg; - return regmap_update_bits(hw->regmap, reg->addr, reg->mask, - ST_LSM6DSX_SHIFT_VAL(val, reg->mask)); + data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask); + return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); } int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor) @@ -492,11 +494,12 @@ int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor) { struct st_lsm6dsx_hw *hw = sensor->hw; const struct st_lsm6dsx_reg *reg; + unsigned int data; int err; reg = &st_lsm6dsx_odr_table[sensor->id].reg; - err = regmap_update_bits(hw->regmap, reg->addr, reg->mask, - ST_LSM6DSX_SHIFT_VAL(0, reg->mask)); + data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask); + err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); if (err < 0) return err; @@ -519,7 +522,7 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, delay = 1000000 / sensor->odr; usleep_range(delay, 2 * delay); - err = regmap_bulk_read(hw->regmap, addr, &data, sizeof(data)); + err = st_lsm6dsx_read_locked(hw, addr, &data, sizeof(data)); if (err < 0) return err; @@ -865,6 +868,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, mutex_init(&hw->fifo_lock); mutex_init(&hw->conf_lock); + mutex_init(&hw->page_lock); hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); if (!hw->buff) @@ -909,6 +913,7 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); struct st_lsm6dsx_sensor *sensor; const struct st_lsm6dsx_reg *reg; + unsigned int data; int i, err = 0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { @@ -917,8 +922,9 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) continue; reg = &st_lsm6dsx_odr_table[sensor->id].reg; - err = regmap_update_bits(hw->regmap, reg->addr, reg->mask, - ST_LSM6DSX_SHIFT_VAL(0, reg->mask)); + data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask); + err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, + data); if (err < 0) return err; } -- cgit v1.2.3 From 19435425f29d2d34a326d7ac0dc7e83a4f0f3210 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:29 +0100 Subject: iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap Perform a complete device reset at bootstrap reloading trimming parameter after sw reset is completed. Device sw reset/boot is explained here: https://www.st.com/resource/en/application_note/dm00517282.pdf, section 5.7 Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index c8b993bea757..961ce9d65d82 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -56,6 +56,7 @@ #define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f #define ST_LSM6DSX_REG_RESET_ADDR 0x12 #define ST_LSM6DSX_REG_RESET_MASK BIT(0) +#define ST_LSM6DSX_REG_BOOT_MASK BIT(7) #define ST_LSM6DSX_REG_BDU_ADDR 0x12 #define ST_LSM6DSX_REG_BDU_MASK BIT(6) #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13 @@ -778,12 +779,23 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) u8 drdy_int_reg; int err; - err = regmap_write(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR, - ST_LSM6DSX_REG_RESET_MASK); + /* device sw reset */ + err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR, + ST_LSM6DSX_REG_RESET_MASK, + FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1)); if (err < 0) return err; - msleep(200); + msleep(50); + + /* reload trimming parameter */ + err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR, + ST_LSM6DSX_REG_BOOT_MASK, + FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1)); + if (err < 0) + return err; + + msleep(50); /* enable Block Data Update */ err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_BDU_ADDR, -- cgit v1.2.3 From d40464f30dc91e7882ff2ad2f2f6a148bd9c39e5 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:30 +0100 Subject: iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark Remove static qualifier from st_lsm6dsx_set_watermark routine in order to be reused supporting st_lsm6dsx i2c controller Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index ec204d3b4b1f..ac4cbbb0b3fb 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -185,6 +185,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor); int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor); int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw); +int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val); int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark); int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 961ce9d65d82..d703fcd8706a 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -600,7 +600,7 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev, return err; } -static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val) +int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val) { struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); struct st_lsm6dsx_hw *hw = sensor->hw; -- cgit v1.2.3 From 6ffb55e5009ffdf103aa206511ea620490c0f002 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:31 +0100 Subject: iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids Add ST_LSM6DSX_ID_EXT{0,1,2} sensor ids as reference for slave devices connected to st_lsm6dsx i2c controller. Moreover introduce odr dependency between accel and ext devices since i2c embedded controller relies on the accelerometer sensor as bus read/write trigger so we need to enable accel device at odr = max(accel_odr, ext_odr) in order to properly communicate with i2c slave devices Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 15 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 77 +++++++++++++++++++++++--- 3 files changed, 88 insertions(+), 9 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index ac4cbbb0b3fb..4c8385d19c78 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -105,8 +105,11 @@ struct st_lsm6dsx_settings { }; enum st_lsm6dsx_sensor_id { - ST_LSM6DSX_ID_ACC, ST_LSM6DSX_ID_GYRO, + ST_LSM6DSX_ID_ACC, + ST_LSM6DSX_ID_EXT0, + ST_LSM6DSX_ID_EXT1, + ST_LSM6DSX_ID_EXT2, ST_LSM6DSX_ID_MAX, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 67cd36bce772..f4804008b585 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -102,6 +102,9 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw, *max_odr = 0, *min_odr = ~0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + sensor = iio_priv(hw->iio_devs[i]); if (!(hw->enable_mask & BIT(sensor->id))) @@ -125,6 +128,9 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { const struct st_lsm6dsx_reg *dec_reg; + if (!hw->iio_devs[i]) + continue; + sensor = iio_priv(hw->iio_devs[i]); /* update fifo decimators and sample in pattern */ if (hw->enable_mask & BIT(sensor->id)) { @@ -232,6 +238,9 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark) return 0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + cur_sensor = iio_priv(hw->iio_devs[i]); if (!(hw->enable_mask & BIT(cur_sensor->id))) @@ -278,6 +287,9 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw) return err; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + sensor = iio_priv(hw->iio_devs[i]); /* * store enable buffer timestamp as reference for @@ -695,6 +707,9 @@ int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw) } for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + buffer = devm_iio_kfifo_allocate(hw->dev); if (!buffer) return -ENOMEM; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index d703fcd8706a..8885c9755456 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -450,7 +450,11 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val) int i; for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) - if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz == odr) + /* + * ext devices can run at different odr respect to + * accel sensor + */ + if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz >= odr) break; if (i == ST_LSM6DSX_ODR_LIST_SIZE) @@ -461,19 +465,67 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val) return 0; } -static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +static u16 st_lsm6dsx_check_odr_dependency(struct st_lsm6dsx_hw *hw, u16 odr, + enum st_lsm6dsx_sensor_id id) { + struct st_lsm6dsx_sensor *ref = iio_priv(hw->iio_devs[id]); + + if (odr > 0) { + if (hw->enable_mask & BIT(id)) + return max_t(u16, ref->odr, odr); + else + return odr; + } else { + return (hw->enable_mask & BIT(id)) ? ref->odr : 0; + } +} + +static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr) +{ + struct st_lsm6dsx_sensor *ref_sensor = sensor; struct st_lsm6dsx_hw *hw = sensor->hw; const struct st_lsm6dsx_reg *reg; unsigned int data; + u8 val = 0; int err; - u8 val; - err = st_lsm6dsx_check_odr(sensor, odr, &val); - if (err < 0) - return err; + switch (sensor->id) { + case ST_LSM6DSX_ID_EXT0: + case ST_LSM6DSX_ID_EXT1: + case ST_LSM6DSX_ID_EXT2: + case ST_LSM6DSX_ID_ACC: { + u16 odr; + int i; + + /* + * i2c embedded controller relies on the accelerometer sensor as + * bus read/write trigger so we need to enable accel device + * at odr = max(accel_odr, ext_odr) in order to properly + * communicate with i2c slave devices + */ + ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + for (i = ST_LSM6DSX_ID_ACC; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i] || i == sensor->id) + continue; + + odr = st_lsm6dsx_check_odr_dependency(hw, req_odr, i); + if (odr != req_odr) + /* device already configured */ + return 0; + } + break; + } + default: + break; + } - reg = &st_lsm6dsx_odr_table[sensor->id].reg; + if (req_odr > 0) { + err = st_lsm6dsx_check_odr(ref_sensor, req_odr, &val); + if (err < 0) + return err; + } + + reg = &st_lsm6dsx_odr_table[ref_sensor->id].reg; data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask); return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); } @@ -894,7 +946,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, if (err < 0) return err; - for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + for (i = 0; i < ST_LSM6DSX_ID_EXT0; i++) { hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name); if (!hw->iio_devs[i]) return -ENOMEM; @@ -911,6 +963,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, } for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + err = devm_iio_device_register(hw->dev, hw->iio_devs[i]); if (err) return err; @@ -929,6 +984,9 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) int i, err = 0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + sensor = iio_priv(hw->iio_devs[i]); if (!(hw->enable_mask & BIT(sensor->id))) continue; @@ -954,6 +1012,9 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev) int i, err = 0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + if (!hw->iio_devs[i]) + continue; + sensor = iio_priv(hw->iio_devs[i]); if (!(hw->enable_mask & BIT(sensor->id))) continue; -- cgit v1.2.3 From 1775044356c2f7f268e9c64d0c3fdd64588322e2 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:32 +0100 Subject: iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine Add st_lsm6dsx_sensor_set_enable routine and remove st_lsm6dsx_sensor_{enable/disable} ones in order to make the code more readable and remove unnecessary functions Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 12 +++------- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 32 ++++++++------------------ 3 files changed, 15 insertions(+), 33 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 4c8385d19c78..2beb4f563892 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -185,8 +185,8 @@ extern const struct dev_pm_ops st_lsm6dsx_pm_ops; int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, struct regmap *regmap); -int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor); -int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor); +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, + bool enable); int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val); int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index f4804008b585..6a379767b919 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -579,15 +579,9 @@ static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable) goto out; } - if (enable) { - err = st_lsm6dsx_sensor_enable(sensor); - if (err < 0) - goto out; - } else { - err = st_lsm6dsx_sensor_disable(sensor); - if (err < 0) - goto out; - } + err = st_lsm6dsx_sensor_set_enable(sensor, enable); + if (err < 0) + goto out; err = st_lsm6dsx_set_fifo_odr(sensor, enable); if (err < 0) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 8885c9755456..28ddedbd1304 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -530,33 +530,21 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr) return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); } -int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor) -{ - int err; - - err = st_lsm6dsx_set_odr(sensor, sensor->odr); - if (err < 0) - return err; - - sensor->hw->enable_mask |= BIT(sensor->id); - - return 0; -} - -int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor) +int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) { struct st_lsm6dsx_hw *hw = sensor->hw; - const struct st_lsm6dsx_reg *reg; - unsigned int data; + u16 odr = enable ? sensor->odr : 0; int err; - reg = &st_lsm6dsx_odr_table[sensor->id].reg; - data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask); - err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data); + err = st_lsm6dsx_set_odr(sensor, odr); if (err < 0) return err; - sensor->hw->enable_mask &= ~BIT(sensor->id); + if (enable) + hw->enable_mask |= BIT(sensor->id); + else + hw->enable_mask &= ~BIT(sensor->id); return 0; } @@ -568,7 +556,7 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, int err, delay; __le16 data; - err = st_lsm6dsx_sensor_enable(sensor); + err = st_lsm6dsx_sensor_set_enable(sensor, true); if (err < 0) return err; @@ -579,7 +567,7 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, if (err < 0) return err; - st_lsm6dsx_sensor_disable(sensor); + st_lsm6dsx_sensor_set_enable(sensor, false); *val = (s16)le16_to_cpu(data); -- cgit v1.2.3 From c91c1c844ebd868ad15bcfc866879fca1079234a Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:33 +0100 Subject: iio: imu: st_lsm6dsx: add i2c embedded controller support i2c controller embedded in lsm6dx series can connect up to four slave devices using accelerometer sensor as trigger for i2c read/write operations. Introduce sensor hub support for lsm6dso sensor. Add register map for lis2mdl magnetometer sensor. In order to perform single read/write operations st_lsm6dsx driver relies on SLV0 channel (hw FIFO is not supported yet) Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/Makefile | 3 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 112 ++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 135 +++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 702 +++++++++++++++++++++++++ include/linux/platform_data/st_sensors_pdata.h | 2 + 5 files changed, 911 insertions(+), 43 deletions(-) create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile index 35919febea2a..e5f733ce6e11 100644 --- a/drivers/iio/imu/st_lsm6dsx/Makefile +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -1,4 +1,5 @@ -st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o +st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ + st_lsm6dsx_shub.o obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 2beb4f563892..d20746eb3d2d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id { * ST_LSM6DSX_TAGGED_SAMPLE_SIZE) #define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask)) +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ +{ \ + .type = chan_type, \ + .address = addr, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = scan_idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + struct st_lsm6dsx_reg { u8 addr; u8 mask; @@ -50,6 +68,28 @@ struct st_lsm6dsx_reg { struct st_lsm6dsx_hw; +struct st_lsm6dsx_odr { + u16 hz; + u8 val; +}; + +#define ST_LSM6DSX_ODR_LIST_SIZE 6 +struct st_lsm6dsx_odr_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + +struct st_lsm6dsx_fs { + u32 gain; + u8 val; +}; + +#define ST_LSM6DSX_FS_LIST_SIZE 4 +struct st_lsm6dsx_fs_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; +}; + /** * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings * @read_fifo: Read FIFO callback. @@ -84,6 +124,66 @@ struct st_lsm6dsx_hw_ts_settings { struct st_lsm6dsx_reg decimator; }; +/** + * struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings + * @page_mux: register page mux info (addr + mask). + * @master_en: master config register info (addr + mask). + * @pullup_en: i2c controller pull-up register info (addr + mask). + * @aux_sens: aux sensor register info (addr + mask). + * @shub_out: sensor hub first output register info. + * @slv0_addr: slave0 address in secondary page. + * @dw_slv0_addr: slave0 write register address in secondary page. + */ +struct st_lsm6dsx_shub_settings { + struct st_lsm6dsx_reg page_mux; + struct st_lsm6dsx_reg master_en; + struct st_lsm6dsx_reg pullup_en; + struct st_lsm6dsx_reg aux_sens; + u8 shub_out; + u8 slv0_addr; + u8 dw_slv0_addr; +}; + +enum st_lsm6dsx_ext_sensor_id { + ST_LSM6DSX_ID_MAGN, +}; + +/** + * struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings + * @i2c_addr: I2c slave address list. + * @wai: Wai address info. + * @id: external sensor id. + * @odr: Output data rate of the sensor [Hz]. + * @gain: Configured sensor sensitivity. + * @temp_comp: Temperature compensation register info (addr + mask). + * @pwr_table: Power on register info (addr + mask). + * @off_canc: Offset cancellation register info (addr + mask). + * @bdu: Block data update register info (addr + mask). + * @out: Output register info. + */ +struct st_lsm6dsx_ext_dev_settings { + u8 i2c_addr[2]; + struct { + u8 addr; + u8 val; + } wai; + enum st_lsm6dsx_ext_sensor_id id; + struct st_lsm6dsx_odr_table_entry odr_table; + struct st_lsm6dsx_fs_table_entry fs_table; + struct st_lsm6dsx_reg temp_comp; + struct { + struct st_lsm6dsx_reg reg; + u8 off_val; + u8 on_val; + } pwr_table; + struct st_lsm6dsx_reg off_canc; + struct st_lsm6dsx_reg bdu; + struct { + u8 addr; + u8 len; + } out; +}; + /** * struct st_lsm6dsx_settings - ST IMU sensor settings * @wai: Sensor WhoAmI default value. @@ -93,6 +193,7 @@ struct st_lsm6dsx_hw_ts_settings { * @batch: List of FIFO batching register info (addr + mask). * @fifo_ops: Sensor hw FIFO parameters. * @ts_settings: Hw timer related settings. + * @shub_settings: i2c controller related settings. */ struct st_lsm6dsx_settings { u8 wai; @@ -102,6 +203,7 @@ struct st_lsm6dsx_settings { struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_fifo_ops fifo_ops; struct st_lsm6dsx_hw_ts_settings ts_settings; + struct st_lsm6dsx_shub_settings shub_settings; }; enum st_lsm6dsx_sensor_id { @@ -129,6 +231,7 @@ enum st_lsm6dsx_fifo_mode { * @sip: Number of samples in a given pattern. * @decimator: FIFO decimation factor. * @ts_ref: Sensor timestamp reference for hw one. + * @ext_info: Sensor settings if it is connected to i2c controller */ struct st_lsm6dsx_sensor { char name[32]; @@ -142,6 +245,11 @@ struct st_lsm6dsx_sensor { u8 sip; u8 decimator; s64 ts_ref; + + struct { + const struct st_lsm6dsx_ext_dev_settings *settings; + u8 addr; + } ext_info; }; /** @@ -181,6 +289,7 @@ struct st_lsm6dsx_hw { const struct st_lsm6dsx_settings *settings; }; +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; extern const struct dev_pm_ops st_lsm6dsx_pm_ops; int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, @@ -197,6 +306,9 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val); +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name); +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable); +int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable); static inline int st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 28ddedbd1304..149080acd859 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -88,17 +88,6 @@ #define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(35000) #define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) -struct st_lsm6dsx_odr { - u16 hz; - u8 val; -}; - -#define ST_LSM6DSX_ODR_LIST_SIZE 6 -struct st_lsm6dsx_odr_table_entry { - struct st_lsm6dsx_reg reg; - struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; -}; - static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { [ST_LSM6DSX_ID_ACC] = { .reg = { @@ -126,17 +115,6 @@ static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { } }; -struct st_lsm6dsx_fs { - u32 gain; - u8 val; -}; - -#define ST_LSM6DSX_FS_LIST_SIZE 4 -struct st_lsm6dsx_fs_table_entry { - struct st_lsm6dsx_reg reg; - struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; -}; - static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { [ST_LSM6DSX_ID_ACC] = { .reg = { @@ -342,27 +320,30 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .mask = GENMASK(7, 6), }, }, + .shub_settings = { + .page_mux = { + .addr = 0x01, + .mask = BIT(6), + }, + .master_en = { + .addr = 0x14, + .mask = BIT(2), + }, + .pullup_en = { + .addr = 0x14, + .mask = BIT(3), + }, + .aux_sens = { + .addr = 0x14, + .mask = GENMASK(1, 0), + }, + .shub_out = 0x02, + .slv0_addr = 0x15, + .dw_slv0_addr = 0x21, + } }, }; -#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ -{ \ - .type = chan_type, \ - .address = addr, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ - .scan_index = scan_idx, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 16, \ - .storagebits = 16, \ - .endianness = IIO_LE, \ - }, \ -} - static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, IIO_MOD_X, 0), @@ -383,6 +364,21 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + unsigned int data; + int err; + + hub_settings = &hw->settings->shub_settings; + data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask); + err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr, + hub_settings->page_mux.mask, data); + usleep_range(100, 150); + + return err; +} + static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id) { int err, i, j, data; @@ -736,8 +732,6 @@ static const struct iio_info st_lsm6dsx_gyro_info = { .hwfifo_set_watermark = st_lsm6dsx_set_watermark, }; -static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; - static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin) { struct device_node *np = hw->dev->of_node; @@ -776,6 +770,51 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg) return err; } +static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct device_node *np = hw->dev->of_node; + struct st_sensors_platform_data *pdata; + unsigned int data; + int err = 0; + + hub_settings = &hw->settings->shub_settings; + + pdata = (struct st_sensors_platform_data *)hw->dev->platform_data; + if ((np && of_property_read_bool(np, "st,pullups")) || + (pdata && pdata->pullups)) { + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + return err; + + data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask); + err = regmap_update_bits(hw->regmap, + hub_settings->pullup_en.addr, + hub_settings->pullup_en.mask, data); + + st_lsm6dsx_set_page(hw, false); + + if (err < 0) + return err; + } + + if (hub_settings->aux_sens.addr) { + /* configure aux sensors */ + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + return err; + + data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask); + err = regmap_update_bits(hw->regmap, + hub_settings->aux_sens.addr, + hub_settings->aux_sens.mask, data); + + st_lsm6dsx_set_page(hw, false); + } + + return err; +} + static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw) { const struct st_lsm6dsx_hw_ts_settings *ts_settings; @@ -856,6 +895,10 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) if (err < 0) return err; + err = st_lsm6dsx_init_shub(hw); + if (err < 0) + return err; + return st_lsm6dsx_init_hw_timer(hw); } @@ -909,6 +952,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, struct regmap *regmap) { + const struct st_lsm6dsx_shub_settings *hub_settings; struct st_lsm6dsx_hw *hw; int i, err; @@ -944,6 +988,13 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, if (err < 0) return err; + hub_settings = &hw->settings->shub_settings; + if (hub_settings->master_en.addr) { + err = st_lsm6dsx_shub_probe(hw, name); + if (err < 0) + return err; + } + if (hw->irq > 0) { err = st_lsm6dsx_fifo_setup(hw); if (err < 0) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c new file mode 100644 index 000000000000..9c66e88a1c3a --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -0,0 +1,702 @@ +/* + * STMicroelectronics st_lsm6dsx i2c controller driver + * + * i2c controller embedded in lsm6dx series can connect up to four + * slave devices using accelerometer sensor as trigger for i2c + * read/write operations. Current implementation relies on SLV0 channel + * for slave configuration and SLV{1,2,3} to read data and push them into + * the hw FIFO + * + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +#include +#include +#include +#include +#include + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_MAX_SLV_NUM 3 +#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3) +#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3) +#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3) + +#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0) + +static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = { + /* LIS2MDL */ + { + .i2c_addr = { 0x1e }, + .wai = { + .addr = 0x4f, + .val = 0x40, + }, + .id = ST_LSM6DSX_ID_MAGN, + .odr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(3, 2), + }, + .odr_avl[0] = { 10, 0x0 }, + .odr_avl[1] = { 20, 0x1 }, + .odr_avl[2] = { 50, 0x2 }, + .odr_avl[3] = { 100, 0x3 }, + }, + .fs_table = { + .fs_avl[0] = { + .gain = 1500, + .val = 0x0, + }, /* 1500 uG/LSB */ + }, + .temp_comp = { + .addr = 0x60, + .mask = BIT(7), + }, + .pwr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(1, 0), + }, + .off_val = 0x2, + .on_val = 0x0, + }, + .off_canc = { + .addr = 0x61, + .mask = BIT(1), + }, + .bdu = { + .addr = 0x62, + .mask = BIT(4), + }, + .out = { + .addr = 0x68, + .len = 6, + }, + }, +}; + +static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) +{ + struct st_lsm6dsx_sensor *sensor; + + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + msleep((2000U / sensor->odr) + 1); +} + +/** + * st_lsm6dsx_shub_read_reg - read i2c controller register + * + * Read st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + int err; + + mutex_lock(&hw->page_lock); + + hub_settings = &hw->settings->shub_settings; + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_read(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_write_reg - write i2c controller register + * + * Write st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + int err; + + mutex_lock(&hw->page_lock); + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_write(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + unsigned int data; + int err; + + /* enable acc sensor as trigger */ + err = st_lsm6dsx_sensor_set_enable(sensor, enable); + if (err < 0) + return err; + + mutex_lock(&hw->page_lock); + + hub_settings = &hw->settings->shub_settings; + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask); + err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr, + hub_settings->master_en.mask, data); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_read - read data from slave device register + * + * Read data from slave device register. SLV0 is used for + * one-shot read operation + */ +static int +st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[3], slv_addr; + int err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + + config[0] = (sensor->ext_info.addr << 1) | 1; + config[1] = addr; + config[2] = len & ST_LS6DSX_READ_OP_MASK; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data, + len & ST_LS6DSX_READ_OP_MASK); + + st_lsm6dsx_shub_master_enable(sensor, false); + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); +} + +/** + * st_lsm6dsx_shub_write - write data to slave device register + * + * Write data from slave device register. SLV0 is used for + * one-shot write operation + */ +static int +st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[2], slv_addr; + int err, i; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + config[0] = sensor->ext_info.addr << 1; + for (i = 0 ; i < len; i++) { + config[1] = addr + i; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr, + &data[i], 1); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + st_lsm6dsx_shub_master_enable(sensor, false); + } + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config)); +} + +static int +st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor, + u8 addr, u8 mask, u8 val) +{ + int err; + u8 data; + + err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data)); + if (err < 0) + return err; + + data = ((data & ~mask) | (val << __ffs(mask) & mask)); + + return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data)); +} + +static int +st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor, + u16 odr, u16 *val) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int i; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + if (settings->odr_table.odr_avl[i].hz == odr) + break; + + if (i == ST_LSM6DSX_ODR_LIST_SIZE) + return -EINVAL; + + *val = settings->odr_table.odr_avl[i].val; + return 0; +} + +static int +st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + u16 val; + int err; + + err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val); + if (err < 0) + return err; + + settings = sensor->ext_info.settings; + return st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, + val); +} + +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + settings = sensor->ext_info.settings; + if (enable) { + err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr); + if (err < 0) + return err; + } else { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, 0); + if (err < 0) + return err; + } + + if (settings->pwr_table.reg.addr) { + u8 val; + + val = enable ? settings->pwr_table.on_val + : settings->pwr_table.off_val; + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->pwr_table.reg.addr, + settings->pwr_table.reg.mask, val); + if (err < 0) + return err; + } + + return st_lsm6dsx_shub_master_enable(sensor, enable); +} + +static int +st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, + struct iio_chan_spec const *ch, + int *val) +{ + int err, delay, len = ch->scan_type.realbits >> 3; + __le16 data; + + err = st_lsm6dsx_shub_set_enable(sensor, true); + if (err < 0) + return err; + + delay = 1000000 / sensor->odr; + usleep_range(delay, 2 * delay); + + err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len); + if (err < 0) + return err; + + st_lsm6dsx_shub_set_enable(sensor, false); + + switch (len) { + case 2: + *val = (s16)le16_to_cpu(data); + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int +st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + break; + + ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val); + iio_device_release_direct_mode(iio_dev); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = sensor->odr; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = sensor->gain; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int +st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int err; + + err = iio_device_claim_direct_mode(iio_dev); + if (err) + return err; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: { + u16 data; + + err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data); + if (!err) + sensor->odr = val; + break; + } + default: + err = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return err; +} + +static ssize_t +st_lsm6dsx_shub_sampling_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) { + u16 val = settings->odr_table.odr_avl[i].hz; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) { + u16 val = settings->fs_table.fs_avl[i].gain; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail); +static IIO_DEVICE_ATTR(in_scale_available, 0444, + st_lsm6dsx_shub_scale_avail, NULL, 0); +static struct attribute *st_lsm6dsx_ext_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_ext_attribute_group = { + .attrs = st_lsm6dsx_ext_attributes, +}; + +static const struct iio_info st_lsm6dsx_ext_info = { + .attrs = &st_lsm6dsx_ext_attribute_group, + .read_raw = st_lsm6dsx_shub_read_raw, + .write_raw = st_lsm6dsx_shub_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static struct iio_dev * +st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_sensor_id id, + const struct st_lsm6dsx_ext_dev_settings *info, + u8 i2c_addr, const char *name) +{ + struct iio_chan_spec *ext_channels; + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); + if (!iio_dev) + return NULL; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = hw->dev; + iio_dev->info = &st_lsm6dsx_ext_info; + + sensor = iio_priv(iio_dev); + sensor->id = id; + sensor->hw = hw; + sensor->odr = info->odr_table.odr_avl[0].hz; + sensor->gain = info->fs_table.fs_avl[0].gain; + sensor->ext_info.settings = info; + sensor->ext_info.addr = i2c_addr; + sensor->watermark = 1; + + switch (info->id) { + case ST_LSM6DSX_ID_MAGN: { + const struct iio_chan_spec magn_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), + }; + + ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels), + GFP_KERNEL); + if (!ext_channels) + return NULL; + + memcpy(ext_channels, magn_channels, sizeof(magn_channels)); + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; + iio_dev->channels = ext_channels; + iio_dev->num_channels = ARRAY_SIZE(magn_channels); + + scnprintf(sensor->name, sizeof(sensor->name), "%s_magn", + name); + break; + } + default: + return NULL; + } + iio_dev->name = sensor->name; + + return iio_dev; +} + +static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + settings = sensor->ext_info.settings; + if (settings->bdu.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->bdu.addr, + settings->bdu.mask, 1); + if (err < 0) + return err; + } + + if (settings->temp_comp.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->temp_comp.addr, + settings->temp_comp.mask, 1); + if (err < 0) + return err; + } + + if (settings->off_canc.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->off_canc.addr, + settings->off_canc.mask, 1); + if (err < 0) + return err; + } + + return 0; +} + +static int +st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, + const struct st_lsm6dsx_ext_dev_settings *settings) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_sensor *sensor; + u8 config[3], data, slv_addr; + bool found = false; + int i, err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + + for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) { + if (!settings->i2c_addr[i]) + continue; + + /* read wai slave register */ + config[0] = (settings->i2c_addr[i] << 1) | 0x1; + config[1] = settings->wai.addr; + config[2] = 0x1; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, + hub_settings->shub_out, + &data, sizeof(data)); + + st_lsm6dsx_shub_master_enable(sensor, false); + + if (err < 0) + return err; + + if (data != settings->wai.val) + continue; + + *i2c_addr = settings->i2c_addr[i]; + found = true; + break; + } + + /* reset SLV0 channel */ + memset(config, 0, sizeof(config)); + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + return found ? 0 : -ENODEV; +} + +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name) +{ + enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0; + struct st_lsm6dsx_sensor *sensor; + int err, i, num_ext_dev = 0; + u8 i2c_addr = 0; + + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) { + err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr, + &st_lsm6dsx_ext_dev_table[i]); + if (err == -ENODEV) + continue; + else if (err < 0) + return err; + + hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id, + &st_lsm6dsx_ext_dev_table[i], + i2c_addr, name); + if (!hw->iio_devs[id]) + return -ENOMEM; + + sensor = iio_priv(hw->iio_devs[id]); + err = st_lsm6dsx_shub_init_device(sensor); + if (err < 0) + return err; + + if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM) + break; + id++; + } + + return 0; +} diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index f8274b0c6888..728193111c2f 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -18,11 +18,13 @@ * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. + * @pullups: enable/disable i2c controller pullup resistors. */ struct st_sensors_platform_data { u8 drdy_int_pin; bool open_drain; bool spi_3wire; + bool pullups; }; #endif /* ST_SENSORS_PDATA_H */ -- cgit v1.2.3 From 14c7c6e1a86077c551632034df1d0bba50ecf3ca Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:34 +0100 Subject: iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine Introduce st_lsm6dsx_push_tagged_data routine to push samples to iio buffers. st_lsm6dsx_push_tagged_data will be reused adding hw fifo support to st_lsm6dsx i2c embedded controller in order to improve code readability Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 44 +++++++++++++++++--------- 1 file changed, 29 insertions(+), 15 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 6a379767b919..4e7ff370cbe0 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -453,6 +453,31 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) return read_len; } +static int +st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag, + u8 *data, s64 ts) +{ + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + switch (tag) { + case ST_LSM6DSX_GYRO_TAG: + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO]; + break; + case ST_LSM6DSX_ACC_TAG: + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC]; + break; + default: + return -EINVAL; + } + + sensor = iio_priv(iio_dev); + iio_push_to_buffers_with_timestamp(iio_dev, data, + ts + sensor->ts_ref); + + return 0; +} + /** * st_lsm6dsx_read_tagged_fifo() - LSM6DSO read FIFO routine * @hw: Pointer to instance of struct st_lsm6dsx_hw. @@ -508,8 +533,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) ST_LSM6DSX_SAMPLE_SIZE); tag = hw->buff[i] >> 3; - switch (tag) { - case ST_LSM6DSX_TS_TAG: + if (tag == ST_LSM6DSX_TS_TAG) { /* * hw timestamp is 4B long and it is stored * in FIFO according to this schema: @@ -526,19 +550,9 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw) if (!reset_ts && ts >= 0xffff0000) reset_ts = true; ts *= ST_LSM6DSX_TS_SENSITIVITY; - break; - case ST_LSM6DSX_GYRO_TAG: - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_GYRO], - iio_buff, gyro_sensor->ts_ref + ts); - break; - case ST_LSM6DSX_ACC_TAG: - iio_push_to_buffers_with_timestamp( - hw->iio_devs[ST_LSM6DSX_ID_ACC], - iio_buff, acc_sensor->ts_ref + ts); - break; - default: - break; + } else { + st_lsm6dsx_push_tagged_data(hw, tag, iio_buff, + ts); } } } -- cgit v1.2.3 From 6d0205fd1e5b1c4281b7648569b065bc0f6a55ab Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 11 Nov 2018 15:15:35 +0100 Subject: iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller Introduce hw FIFO support to lsm6dsx i2c controller. st_lsm6dsx sensor-hub relies on SLV0 for slave configuration since SLV0 is the only channel that can be used to write into i2c slave devices. SLV{1,2,3} channels are used to read external data and push them into the hw FIFO Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 47 +++++++++++++--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 75 ++++++++++++++++++++++++++ 4 files changed, 125 insertions(+), 6 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index d20746eb3d2d..d1d8d07a0714 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -130,18 +130,22 @@ struct st_lsm6dsx_hw_ts_settings { * @master_en: master config register info (addr + mask). * @pullup_en: i2c controller pull-up register info (addr + mask). * @aux_sens: aux sensor register info (addr + mask). + * @wr_once: write_once register info (addr + mask). * @shub_out: sensor hub first output register info. * @slv0_addr: slave0 address in secondary page. * @dw_slv0_addr: slave0 write register address in secondary page. + * @batch_en: Enable/disable FIFO batching. */ struct st_lsm6dsx_shub_settings { struct st_lsm6dsx_reg page_mux; struct st_lsm6dsx_reg master_en; struct st_lsm6dsx_reg pullup_en; struct st_lsm6dsx_reg aux_sens; + struct st_lsm6dsx_reg wr_once; u8 shub_out; u8 slv0_addr; u8 dw_slv0_addr; + u8 batch_en; }; enum st_lsm6dsx_ext_sensor_id { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 4e7ff370cbe0..2c0d3763405a 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -68,6 +68,9 @@ enum st_lsm6dsx_fifo_tag { ST_LSM6DSX_GYRO_TAG = 0x01, ST_LSM6DSX_ACC_TAG = 0x02, ST_LSM6DSX_TS_TAG = 0x04, + ST_LSM6DSX_EXT0_TAG = 0x0f, + ST_LSM6DSX_EXT1_TAG = 0x10, + ST_LSM6DSX_EXT2_TAG = 0x11, }; static const @@ -460,6 +463,12 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag, struct st_lsm6dsx_sensor *sensor; struct iio_dev *iio_dev; + /* + * EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG + * corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG + * to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled + * channel + */ switch (tag) { case ST_LSM6DSX_GYRO_TAG: iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO]; @@ -467,6 +476,24 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag, case ST_LSM6DSX_ACC_TAG: iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC]; break; + case ST_LSM6DSX_EXT0_TAG: + if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0]; + else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)) + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1]; + else + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2]; + break; + case ST_LSM6DSX_EXT1_TAG: + if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) && + (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))) + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1]; + else + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2]; + break; + case ST_LSM6DSX_EXT2_TAG: + iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2]; + break; default: return -EINVAL; } @@ -593,13 +620,21 @@ static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable) goto out; } - err = st_lsm6dsx_sensor_set_enable(sensor, enable); - if (err < 0) - goto out; + if (sensor->id == ST_LSM6DSX_ID_EXT0 || + sensor->id == ST_LSM6DSX_ID_EXT1 || + sensor->id == ST_LSM6DSX_ID_EXT2) { + err = st_lsm6dsx_shub_set_enable(sensor, enable); + if (err < 0) + goto out; + } else { + err = st_lsm6dsx_sensor_set_enable(sensor, enable); + if (err < 0) + goto out; - err = st_lsm6dsx_set_fifo_odr(sensor, enable); - if (err < 0) - goto out; + err = st_lsm6dsx_set_fifo_odr(sensor, enable); + if (err < 0) + goto out; + } err = st_lsm6dsx_update_decimators(hw); if (err < 0) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 149080acd859..12e29dda9b98 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -337,9 +337,14 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .addr = 0x14, .mask = GENMASK(1, 0), }, + .wr_once = { + .addr = 0x14, + .mask = BIT(6), + }, .shub_out = 0x02, .slv0_addr = 0x15, .dw_slv0_addr = 0x21, + .batch_en = BIT(3), } }, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c index 9c66e88a1c3a..ee59b0cac84f 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -148,6 +148,26 @@ out: return err; } +static int +st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, + u8 mask, u8 val) +{ + int err; + + mutex_lock(&hw->page_lock); + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_update_bits(hw->regmap, addr, mask, val); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, bool enable) { @@ -238,6 +258,18 @@ st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, int err, i; hub_settings = &hw->settings->shub_settings; + if (hub_settings->wr_once.addr) { + unsigned int data; + + data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask); + err = st_lsm6dsx_shub_write_reg_with_mask(hw, + hub_settings->wr_once.addr, + hub_settings->wr_once.mask, + data); + if (err < 0) + return err; + } + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); config[0] = sensor->ext_info.addr << 1; for (i = 0 ; i < len; i++) { @@ -319,11 +351,54 @@ st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) val); } +/* use SLV{1,2,3} for FIFO read operations */ +static int +st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + const struct st_lsm6dsx_ext_dev_settings *settings; + u8 config[9] = {}, enable_mask, slv_addr; + struct st_lsm6dsx_hw *hw = sensor->hw; + struct st_lsm6dsx_sensor *cur_sensor; + int i, j = 0; + + hub_settings = &hw->settings->shub_settings; + if (enable) + enable_mask = hw->enable_mask | BIT(sensor->id); + else + enable_mask = hw->enable_mask & ~BIT(sensor->id); + + for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) { + if (!hw->iio_devs[i]) + continue; + + cur_sensor = iio_priv(hw->iio_devs[i]); + if (!(enable_mask & BIT(cur_sensor->id))) + continue; + + settings = cur_sensor->ext_info.settings; + config[j] = (sensor->ext_info.addr << 1) | 1; + config[j + 1] = settings->out.addr; + config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) | + hub_settings->batch_en; + j += 3; + } + + slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); +} + int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) { const struct st_lsm6dsx_ext_dev_settings *settings; int err; + err = st_lsm6dsx_shub_config_channels(sensor, enable); + if (err < 0) + return err; + settings = sensor->ext_info.settings; if (enable) { err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr); -- cgit v1.2.3 From 3aed83caa2f7370a04cc0be0e86d0939eba0c5f7 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 17 Nov 2018 19:04:27 +0100 Subject: iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot Generalize st_lsm6dsx_shub_read_oneshot in order to not use a fixed read length and take into account iio channel realbits for single read operations Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c index ee59b0cac84f..8e47dccdd40f 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -432,8 +432,8 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, struct iio_chan_spec const *ch, int *val) { - int err, delay, len = ch->scan_type.realbits >> 3; - __le16 data; + int err, delay, len; + u8 data[4]; err = st_lsm6dsx_shub_set_enable(sensor, true); if (err < 0) @@ -442,15 +442,17 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, delay = 1000000 / sensor->odr; usleep_range(delay, 2 * delay); - err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len); - if (err < 0) - return err; + len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3); + err = st_lsm6dsx_shub_read(sensor, ch->address, data, len); st_lsm6dsx_shub_set_enable(sensor, false); + if (err < 0) + return err; + switch (len) { case 2: - *val = (s16)le16_to_cpu(data); + *val = (s16)le16_to_cpu(*((__le16 *)data)); break; default: return -EINVAL; -- cgit v1.2.3 From 6e9982918c3fc4f0c4c32c95d1eb0a345baea5f1 Mon Sep 17 00:00:00 2001 From: Martin Kelly Date: Sun, 9 Dec 2018 19:14:55 -0800 Subject: iio: bmi160: use all devm functions in probe Currently, we're using the devm version of some but not all functions. Switch to the devm version of iio_triggered_buffer_setup and iio_device_register to simplify the code a bit and decrease the chance of bugs. Signed-off-by: Martin Kelly Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160.h | 1 - drivers/iio/imu/bmi160/bmi160_core.c | 38 +++++++++++++----------------------- drivers/iio/imu/bmi160/bmi160_i2c.c | 8 -------- drivers/iio/imu/bmi160/bmi160_spi.c | 8 -------- 4 files changed, 14 insertions(+), 41 deletions(-) (limited to 'drivers/iio/imu') diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h index e7b11e74fd1d..2351049d930b 100644 --- a/drivers/iio/imu/bmi160/bmi160.h +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -6,6 +6,5 @@ extern const struct regmap_config bmi160_regmap_config; int bmi160_core_probe(struct device *dev, struct regmap *regmap, const char *name, bool use_spi); -void bmi160_core_remove(struct device *dev); #endif /* BMI160_H_ */ diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index c85659ca9507..b10330b0f93f 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -542,10 +542,12 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) return 0; } -static void bmi160_chip_uninit(struct bmi160_data *data) +static void bmi160_chip_uninit(void *data) { - bmi160_set_mode(data, BMI160_GYRO, false); - bmi160_set_mode(data, BMI160_ACCEL, false); + struct bmi160_data *bmi_data = data; + + bmi160_set_mode(bmi_data, BMI160_GYRO, false); + bmi160_set_mode(bmi_data, BMI160_ACCEL, false); } int bmi160_core_probe(struct device *dev, struct regmap *regmap, @@ -567,6 +569,10 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, if (ret < 0) return ret; + ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data); + if (ret < 0) + return ret; + if (!name && ACPI_HANDLE(dev)) name = bmi160_match_acpi_device(dev); @@ -577,35 +583,19 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmi160_info; - ret = iio_triggered_buffer_setup(indio_dev, NULL, - bmi160_trigger_handler, NULL); + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + bmi160_trigger_handler, NULL); if (ret < 0) - goto uninit; + return ret; - ret = iio_device_register(indio_dev); + ret = devm_iio_device_register(dev, indio_dev); if (ret < 0) - goto buffer_cleanup; + return ret; return 0; -buffer_cleanup: - iio_triggered_buffer_cleanup(indio_dev); -uninit: - bmi160_chip_uninit(data); - return ret; } EXPORT_SYMBOL_GPL(bmi160_core_probe); -void bmi160_core_remove(struct device *dev) -{ - struct iio_dev *indio_dev = dev_get_drvdata(dev); - struct bmi160_data *data = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - iio_triggered_buffer_cleanup(indio_dev); - bmi160_chip_uninit(data); -} -EXPORT_SYMBOL_GPL(bmi160_core_remove); - MODULE_AUTHOR("Daniel Baluta dev, regmap, name, false); } -static int bmi160_i2c_remove(struct i2c_client *client) -{ - bmi160_core_remove(&client->dev); - - return 0; -} - static const struct i2c_device_id bmi160_i2c_id[] = { {"bmi160", 0}, {} @@ -72,7 +65,6 @@ static struct i2c_driver bmi160_i2c_driver = { .of_match_table = of_match_ptr(bmi160_of_match), }, .probe = bmi160_i2c_probe, - .remove = bmi160_i2c_remove, .id_table = bmi160_i2c_id, }; module_i2c_driver(bmi160_i2c_driver); diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c index d34dfdfd1a7d..e521ad14eeac 100644 --- a/drivers/iio/imu/bmi160/bmi160_spi.c +++ b/drivers/iio/imu/bmi160/bmi160_spi.c @@ -29,13 +29,6 @@ static int bmi160_spi_probe(struct spi_device *spi) return bmi160_core_probe(&spi->dev, regmap, id->name, true); } -static int bmi160_spi_remove(struct spi_device *spi) -{ - bmi160_core_remove(&spi->dev); - - return 0; -} - static const struct spi_device_id bmi160_spi_id[] = { {"bmi160", 0}, {} @@ -58,7 +51,6 @@ MODULE_DEVICE_TABLE(of, bmi160_of_match); static struct spi_driver bmi160_spi_driver = { .probe = bmi160_spi_probe, - .remove = bmi160_spi_remove, .id_table = bmi160_spi_id, .driver = { .acpi_match_table = ACPI_PTR(bmi160_acpi_match), -- cgit v1.2.3