From 075affcbe01d4d7cefcd0e30a98df1253bcf8d92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: ide: preserve Host Protected Area by default (v2) From the perspective of most users of recent systems, disabling Host Protected Area (HPA) can break vendor RAID formats, GPT partitions and risks corrupting firmware or overwriting vendor system recovery tools. Unfortunately the original (kernels < 2.6.30) behavior (unconditionally disabling HPA and using full disk capacity) was introduced at the time when the main use of HPA was to make the drive look small enough for the BIOS to allow the system to boot with large capacity drives. Thus to allow the maximum compatibility with the existing setups (using HPA and partitioned with HPA disabled) we automically disable HPA if any partitions overlapping HPA are detected. Additionally HPA can also be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0" to disable HPA on /dev/hda). v2: Fix ->resume HPA support. While at it: - remove stale "idebus=" entry from Documentation/kernel-parameters.txt Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Acked-by: Sergei Shtylyov [patch description was based on input from Alan Cox and Frans Pop] Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 8 +++++++- drivers/ide/ide.c | 10 ++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 61a6d3546221..3d92c9d54d47 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -350,6 +350,9 @@ static void idedisk_check_hpa(ide_drive_t *drive) capacity, sectors_to_MB(capacity), set_max, sectors_to_MB(set_max)); + if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0) + return; + set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); if (set_max) printk(KERN_INFO "%s: Host Protected Area disabled.\n", @@ -430,8 +433,11 @@ static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity) goto out; set = ide_disk_hpa_set_capacity(drive, set, lba48); - if (set) + if (set) { + /* needed for ->resume to disable HPA */ + drive->dev_flags |= IDE_DFLAG_NOHPA; return set; + } out: return drive->capacity64; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 92c9b90931e7..16d056939f9f 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -211,6 +211,11 @@ static unsigned int ide_noflush; module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); MODULE_PARM_DESC(noflush, "disable flush requests for a device"); +static unsigned int ide_nohpa; + +module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0); +MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); + static unsigned int ide_noprobe; module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); @@ -281,6 +286,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) drive->name); drive->dev_flags |= IDE_DFLAG_NOFLUSH; } + if (ide_nohpa & (1 << i)) { + printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", + drive->name); + drive->dev_flags |= IDE_DFLAG_NOHPA; + } if (ide_noprobe & (1 << i)) { printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); drive->dev_flags |= IDE_DFLAG_NOPROBE; -- cgit v1.2.3