From 4a029abee0f1d69cb0445657d6fa5a38597bd17d Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Thu, 30 Oct 2008 15:55:47 +0100 Subject: scx200_i2c: Add missing class parameter The scx200_i2c driver is missing the .class parameter, which means no i2c drivers are willing to probe for devices on the bus and attach to them. Signed-off-by: Len Sorensen Signed-off-by: Jean Delvare --- drivers/i2c/busses/scx200_i2c.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index c3022a023449..e4c98539c517 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", -- cgit v1.2.3 From da6801e38b7fba28fbdc0ceae6681d5a261a42a6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 30 Oct 2008 15:55:47 +0100 Subject: i2c-s3c2410: Correct use of ! and & In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. In particular, the result of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN is always 0. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // Signed-off-by: Julia Lawall Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-s3c2410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c772e02c2803..1fac4e233133 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -507,7 +507,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN) + if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) return -EIO; ret = s3c24xx_i2c_set_master(i2c); -- cgit v1.2.3