From 482116badacba9308abd6c5cae2f5f19e2f81449 Mon Sep 17 00:00:00 2001 From: Richard Leitner Date: Fri, 11 Apr 2014 13:44:44 +0200 Subject: i2c: ali1563: fix checkpatch.pl issues Fixed most checkpatch.pl issues Signed-off-by: Richard Leitner Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ali1563.c | 82 ++++++++++++++++++++++------------------ 1 file changed, 45 insertions(+), 37 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 98a1c97739ba..15517d78d5ff 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -63,7 +63,7 @@ static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a, int size) +static int ali1563_transaction(struct i2c_adapter *a, int size) { u32 data; int timeout; @@ -78,7 +78,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); - outb_p(data | HST_STS_BAD,SMB_HST_STS); + outb_p(data | HST_STS_BAD, SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) return -EBUSY; @@ -102,10 +102,10 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) if (!timeout) { dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ - outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); + outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2); data = inb_p(SMB_HST_STS); status = -ETIMEDOUT; - } + } /* device error - no response, ignore the autodetection case */ if (data & HST_STS_DEVERR) { @@ -117,18 +117,18 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) if (data & HST_STS_BUSERR) { dev_err(&a->dev, "Bus collision!\n"); /* Issue timeout, hoping it helps */ - outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1); } if (data & HST_STS_FAIL) { dev_err(&a->dev, "Cleaning fail after KILL!\n"); - outb_p(0x0,SMB_HST_CNTL2); + outb_p(0x0, SMB_HST_CNTL2); } return status; } -static int ali1563_block_start(struct i2c_adapter * a) +static int ali1563_block_start(struct i2c_adapter *a) { u32 data; int timeout; @@ -142,8 +142,8 @@ static int ali1563_block_start(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); - outb_p(data | HST_STS_BAD,SMB_HST_STS); + dev_warn(&a->dev, "ali1563: Trying to reset busy device\n"); + outb_p(data | HST_STS_BAD, SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) return -EBUSY; @@ -184,13 +184,14 @@ static int ali1563_block_start(struct i2c_adapter * a) return status; } -static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw) +static int ali1563_block(struct i2c_adapter *a, + union i2c_smbus_data *data, u8 rw) { int i, len; int error = 0; /* Do we need this? */ - outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); if (rw == I2C_SMBUS_WRITE) { len = data->block[0]; @@ -198,8 +199,8 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 len = 1; else if (len > 32) len = 32; - outb_p(len,SMB_HST_DAT0); - outb_p(data->block[1],SMB_BLK_DAT); + outb_p(len, SMB_HST_DAT0); + outb_p(data->block[1], SMB_BLK_DAT); } else len = 32; @@ -208,10 +209,12 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 for (i = 0; i < len; i++) { if (rw == I2C_SMBUS_WRITE) { outb_p(data->block[i + 1], SMB_BLK_DAT); - if ((error = ali1563_block_start(a))) + error = ali1563_block_start(a); + if (error) break; } else { - if ((error = ali1563_block_start(a))) + error = ali1563_block_start(a); + if (error) break; if (i == 0) { len = inb_p(SMB_HST_DAT0); @@ -224,25 +227,26 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 } } /* Do we need this? */ - outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); return error; } -static s32 ali1563_access(struct i2c_adapter * a, u16 addr, +static s32 ali1563_access(struct i2c_adapter *a, u16 addr, unsigned short flags, char rw, u8 cmd, - int size, union i2c_smbus_data * data) + int size, union i2c_smbus_data *data) { int error = 0; int timeout; u32 reg; for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { - if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY)) + reg = inb_p(SMB_HST_STS); + if (!(reg & HST_STS_BUSY)) break; } if (!timeout) - dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg); - outb_p(0xff,SMB_HST_STS); + dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg); + outb_p(0xff, SMB_HST_STS); /* Map the size to what the chip understands */ switch (size) { @@ -268,13 +272,14 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | + (size << 3), SMB_HST_CNTL2); /* Write the command register */ - switch(size) { + switch (size) { case HST_CNTL2_BYTE: - if (rw== I2C_SMBUS_WRITE) + if (rw == I2C_SMBUS_WRITE) /* Beware it uses DAT0 register and not CMD! */ outb_p(cmd, SMB_HST_DAT0); break; @@ -292,11 +297,12 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, break; case HST_CNTL2_BLOCK: outb_p(cmd, SMB_HST_CMD); - error = ali1563_block(a,data,rw); + error = ali1563_block(a, data, rw); goto Done; } - if ((error = ali1563_transaction(a, size))) + error = ali1563_transaction(a, size); + if (error) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) @@ -317,7 +323,7 @@ Done: return error; } -static u32 ali1563_func(struct i2c_adapter * a) +static u32 ali1563_func(struct i2c_adapter *a) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | @@ -329,13 +335,13 @@ static int ali1563_setup(struct pci_dev *dev) { u16 ctrl; - pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); + pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); /* SMB I/O Base in high 12 bits and must be aligned with the * size of the I/O space. */ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); if (!ali1563_smba) { - dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); + dev_warn(&dev->dev, "ali1563_smba Uninitialized\n"); goto Err; } @@ -350,8 +356,8 @@ static int ali1563_setup(struct pci_dev *dev) ctrl | ALI1563_SMB_IOEN); pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_err(&dev->dev, "I/O space still not enabled, " - "giving up\n"); + dev_err(&dev->dev, + "I/O space still not enabled, giving up\n"); goto Err; } } @@ -375,7 +381,7 @@ Err: static void ali1563_shutdown(struct pci_dev *dev) { - release_region(ali1563_smba,ALI1563_SMB_IOSIZE); + release_region(ali1563_smba, ALI1563_SMB_IOSIZE); } static const struct i2c_algorithm ali1563_algorithm = { @@ -394,12 +400,14 @@ static int ali1563_probe(struct pci_dev *dev, { int error; - if ((error = ali1563_setup(dev))) + error = ali1563_setup(dev); + if (error) goto exit; ali1563_adapter.dev.parent = &dev->dev; snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); - if ((error = i2c_add_adapter(&ali1563_adapter))) + error = i2c_add_adapter(&ali1563_adapter); + if (error) goto exit_shutdown; return 0; @@ -421,12 +429,12 @@ static const struct pci_device_id ali1563_id_table[] = { {}, }; -MODULE_DEVICE_TABLE (pci, ali1563_id_table); +MODULE_DEVICE_TABLE(pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_smbus", + .name = "ali1563_smbus", .id_table = ali1563_id_table, - .probe = ali1563_probe, + .probe = ali1563_probe, .remove = ali1563_remove, }; -- cgit v1.2.3