From 92ed1a76ca31774eb27de14b2215841367c68056 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 10 Jan 2011 22:11:23 +0100 Subject: i2c: Add generic I2C multiplexer using GPIO API Add an i2c mux driver providing access to i2c bus segments using a hardware MUX sitting on a master bus and controlled through gpio pins. E.G. something like: ---------- ---------- Bus segment 1 - - - - - | | SCL/SDA | |-------------- | | | |------------| | | | | | Bus segment 2 | | | Linux | GPIO 1..N | MUX |--------------- Devices | |------------| | | | | | | | Bus segment M | | | |---------------| | ---------- ---------- - - - - - SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M according to the settings of the GPIO pins 1..N. Signed-off-by: Peter Korsgaard Signed-off-by: Jean Delvare --- drivers/i2c/muxes/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/i2c/muxes/Kconfig') diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 4d91d80bfd23..90b7a0163899 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -5,6 +5,18 @@ menu "Multiplexer I2C Chip support" depends on I2C_MUX +config I2C_MUX_GPIO + tristate "GPIO-based I2C multiplexer" + depends on GENERIC_GPIO + help + If you say yes to this option, support will be included for a + GPIO based I2C multiplexer. This driver provides access to + I2C busses connected through a MUX, which is controlled + through GPIO pins. + + This driver can also be built as a module. If so, the module + will be called gpio-i2cmux. + config I2C_MUX_PCA9541 tristate "NXP PCA9541 I2C Master Selector" depends on EXPERIMENTAL -- cgit v1.2.3