From 898eb71cb17644964c5895fb190e79e3d0c49679 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 18 Oct 2007 03:06:30 -0700
Subject: Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.
Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
drivers/i2c/busses/i2c-pmcmsp.c | 8 ++++----
drivers/i2c/busses/i2c-pnx.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
(limited to 'drivers/i2c/busses')
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 17cecf1ea797..be99c02ecac5 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -591,18 +591,18 @@ static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
if (msg->flags & I2C_M_TEN)
pmcmsptwi_set_twi_config(&oldcfg, data);
- dev_dbg(&adap->dev, "I2C %s of %d bytes ",
- (msg->flags & I2C_M_RD) ? "read" : "write", msg->len);
+ dev_dbg(&adap->dev, "I2C %s of %d bytes %s\n",
+ (msg->flags & I2C_M_RD) ? "read" : "write", msg->len,
+ (ret == MSP_TWI_XFER_OK) ? "succeeded" : "failed");
+
if (ret != MSP_TWI_XFER_OK) {
/*
* TODO: We could potentially loop and retry in the case
* of MSP_TWI_XFER_TIMEOUT.
*/
- dev_dbg(&adap->dev, "failed\n");
return -1;
}
- dev_dbg(&adap->dev, "succeeded\n");
return 0;
}
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 17376feb1acc..f8d0dff0de7e 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -575,7 +575,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
else {
freq_mhz = PNX_DEFAULT_FREQ;
dev_info(&pdev->dev, "Setting bus frequency to default value: "
- "%d MHz", freq_mhz);
+ "%d MHz\n", freq_mhz);
}
i2c_pnx->adapter->algo = &pnx_algorithm;
--
cgit v1.2.3