From 3f68910259524ce84eaee05075141cdaa45e9195 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Sat, 4 Dec 2021 23:58:16 +0200 Subject: i2c: exynos5: Add support for ExynosAutoV9 SoC ExynosAutoV9 functioning logic mostly follows I2C_TYPE_EXYNOS7, but timing calculation and configuration procedure is changed: e.g. only timing_s3 has to be set now. Another change of HSI2C controller in ExynosAutoV9 SoC is that it's now a part of USIv2 IP-core. No changes is needed for I2C driver though, as all USI related configuration is done in USI driver. Signed-off-by: Jaewon Kim Signed-off-by: Sam Protsenko Reviewed-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-exynos5.c | 62 ++++++++++++++++++++++++++++++++++------ 1 file changed, 53 insertions(+), 9 deletions(-) (limited to 'drivers/i2c/busses/i2c-exynos5.c') diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 97d4f3ac0abd..c7e3cae99d13 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -169,6 +169,7 @@ enum i2c_type_exynos { I2C_TYPE_EXYNOS5, I2C_TYPE_EXYNOS7, + I2C_TYPE_EXYNOSAUTOV9, }; struct exynos5_i2c { @@ -230,6 +231,11 @@ static const struct exynos_hsi2c_variant exynos7_hsi2c_data = { .hw = I2C_TYPE_EXYNOS7, }; +static const struct exynos_hsi2c_variant exynosautov9_hsi2c_data = { + .fifo_depth = 64, + .hw = I2C_TYPE_EXYNOSAUTOV9, +}; + static const struct of_device_id exynos5_i2c_match[] = { { .compatible = "samsung,exynos5-hsi2c", @@ -243,6 +249,9 @@ static const struct of_device_id exynos5_i2c_match[] = { }, { .compatible = "samsung,exynos7-hsi2c", .data = &exynos7_hsi2c_data + }, { + .compatible = "samsung,exynosautov9-hsi2c", + .data = &exynosautov9_hsi2c_data }, {}, }; MODULE_DEVICE_TABLE(of, exynos5_i2c_match); @@ -281,6 +290,31 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings) i2c->op_clock; int div, clk_cycle, temp; + /* + * In case of HSI2C controllers in ExynosAutoV9: + * + * FSCL = IPCLK / ((CLK_DIV + 1) * 16) + * T_SCL_LOW = IPCLK * (CLK_DIV + 1) * (N + M) + * [N : number of 0's in the TSCL_H_HS] + * [M : number of 0's in the TSCL_L_HS] + * T_SCL_HIGH = IPCLK * (CLK_DIV + 1) * (N + M) + * [N : number of 1's in the TSCL_H_HS] + * [M : number of 1's in the TSCL_L_HS] + * + * Result of (N + M) is always 8. + * In general case, we don't need to control timing_s1 and timing_s2. + */ + if (i2c->variant->hw == I2C_TYPE_EXYNOSAUTOV9) { + div = ((clkin / (16 * i2c->op_clock)) - 1); + i2c_timing_s3 = div << 16; + if (hs_timings) + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3); + else + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3); + + return 0; + } + /* * In case of HSI2C controller in Exynos5 series * FPCLK / FI2C = @@ -422,7 +456,10 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) writel(int_status, i2c->regs + HSI2C_INT_STATUS); /* handle interrupt related to the transfer status */ - if (i2c->variant->hw == I2C_TYPE_EXYNOS7) { + switch (i2c->variant->hw) { + case I2C_TYPE_EXYNOSAUTOV9: + fallthrough; + case I2C_TYPE_EXYNOS7: if (int_status & HSI2C_INT_TRANS_DONE) { i2c->trans_done = 1; i2c->state = 0; @@ -443,7 +480,12 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) i2c->state = -ETIMEDOUT; goto stop; } - } else if (int_status & HSI2C_INT_I2C) { + + break; + case I2C_TYPE_EXYNOS5: + if (!(int_status & HSI2C_INT_I2C)) + break; + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); if (trans_status & HSI2C_NO_DEV_ACK) { dev_dbg(i2c->dev, "No ACK from device\n"); @@ -465,6 +507,8 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) i2c->trans_done = 1; i2c->state = 0; } + + break; } if ((i2c->msg->flags & I2C_M_RD) && (int_status & @@ -569,13 +613,13 @@ static void exynos5_i2c_bus_check(struct exynos5_i2c *i2c) { unsigned long timeout; - if (i2c->variant->hw != I2C_TYPE_EXYNOS7) + if (i2c->variant->hw == I2C_TYPE_EXYNOS5) return; /* - * HSI2C_MASTER_ST_LOSE state in EXYNOS7 variant before transaction - * indicates that bus is stuck (SDA is low). In such case bus recovery - * can be performed. + * HSI2C_MASTER_ST_LOSE state (in Exynos7 and ExynosAutoV9 variants) + * before transaction indicates that bus is stuck (SDA is low). + * In such case bus recovery can be performed. */ timeout = jiffies + msecs_to_jiffies(100); for (;;) { @@ -611,10 +655,10 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) unsigned long flags; unsigned short trig_lvl; - if (i2c->variant->hw == I2C_TYPE_EXYNOS7) - int_en |= HSI2C_INT_I2C_TRANS; - else + if (i2c->variant->hw == I2C_TYPE_EXYNOS5) int_en |= HSI2C_INT_I2C; + else + int_en |= HSI2C_INT_I2C_TRANS; i2c_ctl = readl(i2c->regs + HSI2C_CTL); i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON); -- cgit v1.2.3