From fd8feec665fef840277515a5c2b9b7c3e3970fad Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Wed, 11 Nov 2020 16:46:43 +0000 Subject: hwmon: (pwm-fan) Fix RPM calculation To convert the number of pulses counted into an RPM estimation, we need to divide by the width of our measurement interval instead of multiplying by it. If the width of the measurement interval is zero we don't update the RPM value to avoid dividing by zero. We also don't need to do 64-bit division, with 32-bits we can handle a fan running at over 4 million RPM. Signed-off-by: Paul Barker Link: https://lore.kernel.org/r/20201111164643.7087-1-pbarker@konsulko.com Signed-off-by: Guenter Roeck --- drivers/hwmon/pwm-fan.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index bdba2143021a..1f63807c0399 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -54,16 +54,18 @@ static irqreturn_t pulse_handler(int irq, void *dev_id) static void sample_timer(struct timer_list *t) { struct pwm_fan_ctx *ctx = from_timer(ctx, t, rpm_timer); + unsigned int delta = ktime_ms_delta(ktime_get(), ctx->sample_start); int pulses; - u64 tmp; - pulses = atomic_read(&ctx->pulses); - atomic_sub(pulses, &ctx->pulses); - tmp = (u64)pulses * ktime_ms_delta(ktime_get(), ctx->sample_start) * 60; - do_div(tmp, ctx->pulses_per_revolution * 1000); - ctx->rpm = tmp; + if (delta) { + pulses = atomic_read(&ctx->pulses); + atomic_sub(pulses, &ctx->pulses); + ctx->rpm = (unsigned int)(pulses * 1000 * 60) / + (ctx->pulses_per_revolution * delta); + + ctx->sample_start = ktime_get(); + } - ctx->sample_start = ktime_get(); mod_timer(&ctx->rpm_timer, jiffies + HZ); } -- cgit v1.2.3