From 08c79950a047dbaccf05d70a203db2ee75ac3bd8 Mon Sep 17 00:00:00 2001 From: Rudolf Marek Date: Wed, 5 Jul 2006 18:14:31 +0200 Subject: hwmon: Add fan speed control features to w83627ehf This patch adds long-awaited support for automatic fan modes. Based on the work of Yuan Mu from Winbond, I finished the support with the great help of David Hubbard. Signed-off-by: Yuan Mu Signed-off-by: Rudolf Marek Signed-off-by: David Hubbard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627ehf.c | 393 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 382 insertions(+), 11 deletions(-) (limited to 'drivers/hwmon/w83627ehf.c') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index b21d6b9d7eac..23824183e02f 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -2,6 +2,8 @@ w83627ehf - Driver for the hardware monitoring functionality of the Winbond W83627EHF Super-I/O chip Copyright (C) 2005 Jean Delvare + Copyright (C) 2006 Yuan Mu , + Rudolf Marek Shamelessly ripped from the w83627hf driver Copyright (C) 2003 Mark Studebaker @@ -29,8 +31,8 @@ Supports the following chips: - Chip #vin #fan #pwm #temp chip_id man_id - w83627ehf 10 5 - 3 0x88 0x5ca3 + Chip #vin #fan #pwm #temp chip_id man_id + w83627ehf 10 5 4 3 0x88,0xa1 0x5ca3 */ #include @@ -145,10 +147,44 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 }; #define W83627EHF_REG_ALARM2 0x45A #define W83627EHF_REG_ALARM3 0x45B +/* SmartFan registers */ +/* DC or PWM output fan configuration */ +static const u8 W83627EHF_REG_PWM_ENABLE[] = { + 0x04, /* SYS FAN0 output mode and PWM mode */ + 0x04, /* CPU FAN0 output mode and PWM mode */ + 0x12, /* AUX FAN mode */ + 0x62, /* CPU fan1 mode */ +}; + +static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; +static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 }; + +/* FAN Duty Cycle, be used to control */ +static const u8 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; +static const u8 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; +static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; + + +/* Advanced Fan control, some values are common for all fans */ +static const u8 W83627EHF_REG_FAN_MIN_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; +static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0C, 0x0D, 0x17, 0x66 }; + /* * Conversions */ +/* 1 is PWM mode, output in ms */ +static inline unsigned int step_time_from_reg(u8 reg, u8 mode) +{ + return mode ? 100 * reg : 400 * reg; +} + +static inline u8 step_time_to_reg(unsigned int msec, u8 mode) +{ + return SENSORS_LIMIT((mode ? (msec + 50) / 100 : + (msec + 200) / 400), 1, 255); +} + static inline unsigned int fan_from_reg(u8 reg, unsigned int div) { @@ -170,12 +206,12 @@ temp1_from_reg(s8 reg) } static inline s8 -temp1_to_reg(int temp) +temp1_to_reg(int temp, int min, int max) { - if (temp <= -128000) - return -128; - if (temp >= 127000) - return 127; + if (temp <= min) + return min / 1000; + if (temp >= max) + return max / 1000; if (temp < 0) return (temp - 500) / 1000; return (temp + 500) / 1000; @@ -223,6 +259,16 @@ struct w83627ehf_data { s16 temp_max[2]; s16 temp_max_hyst[2]; u32 alarms; + + u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ + u8 pwm_enable[4]; /* 1->manual + 2->thermal cruise (also called SmartFan I) */ + u8 pwm[4]; + u8 target_temp[4]; + u8 tolerance[4]; + + u8 fan_min_output[4]; /* minimum fan speed */ + u8 fan_stop_time[4]; }; static inline int is_word_sized(u16 reg) @@ -349,6 +395,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct w83627ehf_data *data = i2c_get_clientdata(client); + int pwmcfg = 0, tolerance = 0; /* shut up the compiler */ int i; mutex_lock(&data->update_lock); @@ -416,6 +463,34 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } } + for (i = 0; i < 4; i++) { + /* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ + if (i != 1) { + pwmcfg = w83627ehf_read_value(client, + W83627EHF_REG_PWM_ENABLE[i]); + tolerance = w83627ehf_read_value(client, + W83627EHF_REG_TOLERANCE[i]); + } + data->pwm_mode[i] = + ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) + ? 0 : 1; + data->pwm_enable[i] = + ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i]) + & 3) + 1; + data->pwm[i] = w83627ehf_read_value(client, + W83627EHF_REG_PWM[i]); + data->fan_min_output[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_MIN_OUTPUT[i]); + data->fan_stop_time[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_STOP_TIME[i]); + data->target_temp[i] = + w83627ehf_read_value(client, + W83627EHF_REG_TARGET[i]) & + (data->pwm_mode[i] == 1 ? 0x7f : 0xff); + data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) + & 0x0f; + } + /* Measured temperatures and limits */ data->temp1 = w83627ehf_read_value(client, W83627EHF_REG_TEMP1); @@ -711,7 +786,7 @@ store_temp1_##reg(struct device *dev, struct device_attribute *attr, \ u32 val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ - data->temp1_##reg = temp1_to_reg(val); \ + data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \ w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ data->temp1_##reg); \ mutex_unlock(&data->update_lock); \ @@ -777,6 +852,281 @@ static struct sensor_device_attribute sda_temp[] = { SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), }; +#define show_pwm_reg(reg) \ +static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +} + +show_pwm_reg(pwm_mode) +show_pwm_reg(pwm_enable) +show_pwm_reg(pwm) + +static ssize_t +store_pwm_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = simple_strtoul(buf, NULL, 10); + u16 reg; + + if (val > 1) + return -EINVAL; + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + data->pwm_mode[nr] = val; + reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]); + if (!val) + reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr]; + w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255); + + mutex_lock(&data->update_lock); + data->pwm[nr] = val; + w83627ehf_write_value(client, W83627EHF_REG_PWM[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u32 val = simple_strtoul(buf, NULL, 10); + u16 reg; + + if (!val || (val > 2)) /* only modes 1 and 2 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]); + data->pwm_enable[nr] = val; + reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr]; + w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + + +#define show_tol_temp(reg) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", temp1_from_reg(data->reg[nr])); \ +} + +show_tol_temp(tolerance) +show_tol_temp(target_temp) + +static ssize_t +store_target_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000); + + mutex_lock(&data->update_lock); + data->target_temp[nr] = val; + w83627ehf_write_value(client, W83627EHF_REG_TARGET[nr], val); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t +store_tolerance(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + u16 reg; + /* Limit the temp to 0C - 15C */ + u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000); + + mutex_lock(&data->update_lock); + reg = w83627ehf_read_value(client, W83627EHF_REG_TOLERANCE[nr]); + data->tolerance[nr] = val; + if (nr == 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + w83627ehf_write_value(client, W83627EHF_REG_TOLERANCE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static struct sensor_device_attribute sda_pwm[] = { + SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0), + SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1), + SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2), + SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3), +}; + +static struct sensor_device_attribute sda_pwm_mode[] = { + SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 0), + SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 1), + SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 2), + SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode, + store_pwm_mode, 3), +}; + +static struct sensor_device_attribute sda_pwm_enable[] = { + SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 0), + SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 1), + SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 2), + SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable, + store_pwm_enable, 3), +}; + +static struct sensor_device_attribute sda_target_temp[] = { + SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 0), + SENSOR_ATTR(pwm2_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 1), + SENSOR_ATTR(pwm3_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 2), + SENSOR_ATTR(pwm4_target, S_IWUSR | S_IRUGO, show_target_temp, + store_target_temp, 3), +}; + +static struct sensor_device_attribute sda_tolerance[] = { + SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 0), + SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 1), + SENSOR_ATTR(pwm3_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 2), + SENSOR_ATTR(pwm4_tolerance, S_IWUSR | S_IRUGO, show_tolerance, + store_tolerance, 3), +}; + +static void device_create_file_pwm(struct device *dev, int i) +{ + device_create_file(dev, &sda_pwm[i].dev_attr); + device_create_file(dev, &sda_pwm_mode[i].dev_attr); + device_create_file(dev, &sda_pwm_enable[i].dev_attr); + device_create_file(dev, &sda_target_temp[i].dev_attr); + device_create_file(dev, &sda_tolerance[i].dev_attr); +} + +/* Smart Fan registers */ + +#define fan_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", data->reg[nr]); \ +}\ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{\ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} + +fan_functions(fan_min_output, FAN_MIN_OUTPUT) + +#define fan_time_functions(reg, REG) \ +static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + return sprintf(buf, "%d\n", \ + step_time_from_reg(data->reg[nr], data->pwm_mode[nr])); \ +} \ +\ +static ssize_t \ +store_##reg(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \ + int nr = sensor_attr->index; \ + u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \ + data->pwm_mode[nr]); \ + mutex_lock(&data->update_lock); \ + data->reg[nr] = val; \ + w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \ + mutex_unlock(&data->update_lock); \ + return count; \ +} \ + +fan_time_functions(fan_stop_time, FAN_STOP_TIME) + + +static struct sensor_device_attribute sda_sf3_arrays_fan4[] = { + SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 3), + SENSOR_ATTR(pwm4_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 3), +}; + +static struct sensor_device_attribute sda_sf3_arrays[] = { + SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 0), + SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 1), + SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, + store_fan_stop_time, 2), + SENSOR_ATTR(pwm1_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 0), + SENSOR_ATTR(pwm2_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 1), + SENSOR_ATTR(pwm3_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, + store_fan_min_output, 2), +}; + /* * Driver and client management */ @@ -810,6 +1160,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) struct i2c_client *client; struct w83627ehf_data *data; struct device *dev; + u8 fan4pin, fan5pin; int i, err = 0; if (!request_region(address + REGION_OFFSET, REGION_LENGTH, @@ -848,13 +1199,21 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) data->fan_min[i] = w83627ehf_read_value(client, W83627EHF_REG_FAN_MIN[i]); + /* fan4 and fan5 share some pins with the GPIO and serial flash */ + + superio_enter(); + fan5pin = superio_inb(0x24) & 0x2; + fan4pin = superio_inb(0x29) & 0x6; + superio_exit(); + /* It looks like fan4 and fan5 pins can be alternatively used as fan on/off switches */ + data->has_fan = 0x07; /* fan1, fan2 and fan3 */ i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); - if (i & (1 << 2)) + if ((i & (1 << 2)) && (!fan4pin)) data->has_fan |= (1 << 3); - if (i & (1 << 0)) + if ((i & (1 << 0)) && (!fan5pin)) data->has_fan |= (1 << 4); /* Register sysfs hooks */ @@ -864,13 +1223,25 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit_detach; } + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) + device_create_file(dev, &sda_sf3_arrays[i].dev_attr); + + /* if fan4 is enabled create the sf3 files for it */ + if (data->has_fan & (1 << 3)) + for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) + device_create_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); + for (i = 0; i < 10; i++) device_create_file_in(dev, i); for (i = 0; i < 5; i++) { - if (data->has_fan & (1 << i)) + if (data->has_fan & (1 << i)) { device_create_file_fan(dev, i); + if (i != 4) /* we have only 4 pwm */ + device_create_file_pwm(dev, i); + } } + for (i = 0; i < ARRAY_SIZE(sda_temp); i++) device_create_file(dev, &sda_temp[i].dev_attr); -- cgit v1.2.3