From 594fbe713bf60073ed884dc317a74dd5b327aba7 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Thu, 20 Jun 2013 22:21:04 +0200 Subject: Add support for GMT G762/G763 PWM fan controllers GMT G762/763 fan speed PWM controller is connected directly to a fan and performs closed-loop or open-loop control of the fan speed. Two modes - PWM or DC - are supported by the chip. Introduced driver provides various knobs to control the operations of the chip (via sysfs interface). Specific characteristics of the system can be passed either using board init code or via DT. Documentation for both the driver and DT bindings are also provided. Signed-off-by: Arnaud Ebalard Tested-by: Simon Guinot Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/hwmon/Kconfig') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 683c769a8fca..e989f7fd645b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -461,6 +461,16 @@ config SENSORS_G760A This driver can also be built as a module. If so, the module will be called g760a. +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C -- cgit v1.2.3