From 3d8acd1f667b45c531401c8f0c2033072e32a05d Mon Sep 17 00:00:00 2001 From: Gary Wang Date: Wed, 23 Dec 2015 16:11:35 +0800 Subject: drm/i915: increase the tries for HDMI hotplug live status checking The total delay of HDMI hotplug detecting with 30ms is sometimes not enoughtfor HDMI live status up with specific HDMI monitors in BSW platform. After doing experiments for following monitors, it needs 80ms at least for those worst cases. Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms) Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms) BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms) DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms) HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms) It looks like 70-80 ms is BSW platform needs in some bad cases of the monitors at this end (8 times delay at most). Keep less than 100ms for HDCP pulse HPD low (with at least 100ms) to respond a plug out. Reviewed-by: Cooper Chiou Tested-by: Gary Wang Cc: Gavin Hindman Cc: Sonika Jindal Cc: Shashank Sharma Cc: Shobhit Kumar Signed-off-by: Gary Wang Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com Tested-by: Shobhit Kumar Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Signed-off-by: Daniel Vetter (cherry picked from commit f8d03ea0053b23de42c828d559016eabe0b91523) [Jani: undo the file mode change of the original commit] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 64086f2d4e26..e6c035b0fc1c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1381,7 +1381,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); - for (try = 0; !live_status && try < 4; try++) { + for (try = 0; !live_status && try < 9; try++) { if (try) msleep(10); live_status = intel_digital_port_connected(dev_priv, -- cgit v1.2.3