From 3b6ec458578bf065e102e8bb4b9e61dbc0caf5a4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 6 Feb 2018 10:35:40 +0100 Subject: drm/pl111: Support multiple endpoints on the CLCD The Versatile PL110 implementations use multiple endpoints: from the PL111 port, the lines are routed through a PLD, and from there forked so the same lines go to a VGA DAC and an external TFT panel connector. This is discrete wireing so there is no way to turn of one output, i.e. this is really two endpoints, not two ports. We model this with multiple endpoints, so we need to loop over the available endpoints, check for panel or bridge on each and accumulate the result before continuing. The code already will give the panel preference over the bridge, if present, so the output will be sent to the panel if both a panel and a bridge is present on two endpoints of the same port. If they all return -EPROBE_DEFER we return -EPROBE_DEFER as well. If just one endpoint is present on the port, the behaviour is the same as before. Reviewed-by: Eric Anholt Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-5-linus.walleij@linaro.org --- drivers/gpu/drm/pl111/pl111_drv.c | 62 +++++++++++++++++++++++++++++++++++---- 1 file changed, 56 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm/pl111') diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index 94fbc7cc5e19..1231905150d0 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -58,6 +58,8 @@ #include #include #include +#include +#include #include #include @@ -85,9 +87,13 @@ static int pl111_modeset_init(struct drm_device *dev) { struct drm_mode_config *mode_config; struct pl111_drm_dev_private *priv = dev->dev_private; - struct drm_panel *panel; - struct drm_bridge *bridge; + struct device_node *np = dev->dev->of_node; + struct device_node *remote; + struct drm_panel *panel = NULL; + struct drm_bridge *bridge = NULL; + bool defer = false; int ret = 0; + int i; drm_mode_config_init(dev); mode_config = &dev->mode_config; @@ -97,10 +103,54 @@ static int pl111_modeset_init(struct drm_device *dev) mode_config->min_height = 1; mode_config->max_height = 768; - ret = drm_of_find_panel_or_bridge(dev->dev->of_node, - 0, 0, &panel, &bridge); - if (ret && ret != -ENODEV) - return ret; + i = 0; + for_each_endpoint_of_node(np, remote) { + struct drm_panel *tmp_panel; + struct drm_bridge *tmp_bridge; + + dev_dbg(dev->dev, "checking endpoint %d\n", i); + + ret = drm_of_find_panel_or_bridge(dev->dev->of_node, + 0, i, + &tmp_panel, + &tmp_bridge); + if (ret) { + if (ret == -EPROBE_DEFER) { + /* + * Something deferred, but that is often just + * another way of saying -ENODEV, but let's + * cast a vote for later deferral. + */ + defer = true; + } else if (ret != -ENODEV) { + /* Continue, maybe something else is working */ + dev_err(dev->dev, + "endpoint %d returns %d\n", i, ret); + } + } + + if (tmp_panel) { + dev_info(dev->dev, + "found panel on endpoint %d\n", i); + panel = tmp_panel; + } + if (tmp_bridge) { + dev_info(dev->dev, + "found bridge on endpoint %d\n", i); + bridge = tmp_bridge; + } + + i++; + } + + /* + * If we can't find neither panel nor bridge on any of the + * endpoints, and any of them retured -EPROBE_DEFER, then + * let's defer this driver too. + */ + if ((!panel && !bridge) && defer) + return -EPROBE_DEFER; + if (panel) { bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_Unknown); -- cgit v1.2.3