From ac1d6d74884ecad4c2bd5ff7e341e1a9baf295a8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 23 Oct 2018 09:46:30 +0200 Subject: drm/panel: Add driver for Samsung S6D16D0 panel The Samsung S6D16D0 is a simple comman mode only DSI display that is used on the ST-Ericsson Ux500 reference design TVK1281618 user interface board (UIB). Cc: Andrzej Hajda Reviewed-by: Sam Ravnborg Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org --- drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 264 ++++++++++++++++++++++++++ 1 file changed, 264 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6d16d0.c (limited to 'drivers/gpu/drm/panel/panel-samsung-s6d16d0.c') diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c new file mode 100644 index 000000000000..fa8bfa7c492d --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * MIPI-DSI Samsung s6d16d0 panel driver. This is a 864x480 + * AMOLED panel with a command-only DSI interface. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +struct s6d16d0 { + struct device *dev; + struct drm_panel panel; + struct regulator *supply; + struct gpio_desc *reset_gpio; +}; + +/* + * The timings are not very helpful as the display is used in + * command mode. + */ +static const struct drm_display_mode samsung_s6d16d0_mode = { + /* HS clock, (htotal*vtotal*vrefresh)/1000 */ + .clock = 420160, + .hdisplay = 864, + .hsync_start = 864 + 154, + .hsync_end = 864 + 154 + 16, + .htotal = 864 + 154 + 16 + 32, + .vdisplay = 480, + .vsync_start = 480 + 1, + .vsync_end = 480 + 1 + 1, + .vtotal = 480 + 1 + 1 + 1, + /* + * This depends on the clocking HS vs LP rate, this value + * is calculated as: + * vrefresh = (clock * 1000) / (htotal*vtotal) + */ + .vrefresh = 816, + .width_mm = 84, + .height_mm = 48, +}; + +static inline struct s6d16d0 *panel_to_s6d16d0(struct drm_panel *panel) +{ + return container_of(panel, struct s6d16d0, panel); +} + +static int s6d16d0_unprepare(struct drm_panel *panel) +{ + struct s6d16d0 *s6 = panel_to_s6d16d0(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); + int ret; + + /* Enter sleep mode */ + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to enter sleep mode (%d)\n", + ret); + return ret; + } + + /* Assert RESET */ + gpiod_set_value_cansleep(s6->reset_gpio, 1); + regulator_disable(s6->supply); + + return 0; +} + +static int s6d16d0_prepare(struct drm_panel *panel) +{ + struct s6d16d0 *s6 = panel_to_s6d16d0(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); + int ret; + + ret = regulator_enable(s6->supply); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to enable supply (%d)\n", ret); + return ret; + } + + /* Assert RESET */ + gpiod_set_value_cansleep(s6->reset_gpio, 1); + udelay(10); + /* De-assert RESET */ + gpiod_set_value_cansleep(s6->reset_gpio, 0); + msleep(120); + + /* Enabe tearing mode: send TE (tearing effect) at VBLANK */ + ret = mipi_dsi_dcs_set_tear_on(dsi, + MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to enble vblank TE (%d)\n", + ret); + return ret; + } + /* Exit sleep mode and power on */ + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to exit sleep mode (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int s6d16d0_enable(struct drm_panel *panel) +{ + struct s6d16d0 *s6 = panel_to_s6d16d0(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); + int ret; + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to turn display on (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int s6d16d0_disable(struct drm_panel *panel) +{ + struct s6d16d0 *s6 = panel_to_s6d16d0(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); + int ret; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret) { + DRM_DEV_ERROR(s6->dev, "failed to turn display off (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int s6d16d0_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct drm_display_mode *mode; + + strncpy(connector->display_info.name, "Samsung S6D16D0\0", + DRM_DISPLAY_INFO_LEN); + + mode = drm_mode_duplicate(panel->drm, &samsung_s6d16d0_mode); + if (!mode) { + DRM_ERROR("bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs s6d16d0_drm_funcs = { + .disable = s6d16d0_disable, + .unprepare = s6d16d0_unprepare, + .prepare = s6d16d0_prepare, + .enable = s6d16d0_enable, + .get_modes = s6d16d0_get_modes, +}; + +static int s6d16d0_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct s6d16d0 *s6; + int ret; + + s6 = devm_kzalloc(dev, sizeof(struct s6d16d0), GFP_KERNEL); + if (!s6) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, s6); + s6->dev = dev; + + dsi->lanes = 2; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->hs_rate = 420160000; + dsi->lp_rate = 19200000; + /* + * This display uses command mode so no MIPI_DSI_MODE_VIDEO + * or MIPI_DSI_MODE_VIDEO_SYNC_PULSE + * + * As we only send commands we do not need to be continuously + * clocked. + */ + dsi->mode_flags = + MIPI_DSI_CLOCK_NON_CONTINUOUS | + MIPI_DSI_MODE_EOT_PACKET; + + s6->supply = devm_regulator_get(dev, "vdd1"); + if (IS_ERR(s6->supply)) + return PTR_ERR(s6->supply); + + /* This asserts RESET by default */ + s6->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(s6->reset_gpio)) { + ret = PTR_ERR(s6->reset_gpio); + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n", + ret); + return ret; + } + + drm_panel_init(&s6->panel); + s6->panel.dev = dev; + s6->panel.funcs = &s6d16d0_drm_funcs; + + ret = drm_panel_add(&s6->panel); + if (ret < 0) + return ret; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + drm_panel_remove(&s6->panel); + + return ret; +} + +static int s6d16d0_remove(struct mipi_dsi_device *dsi) +{ + struct s6d16d0 *s6 = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&s6->panel); + + return 0; +} + +static const struct of_device_id s6d16d0_of_match[] = { + { .compatible = "samsung,s6d16d0" }, + { } +}; +MODULE_DEVICE_TABLE(of, s6d16d0_of_match); + +static struct mipi_dsi_driver s6d16d0_driver = { + .probe = s6d16d0_probe, + .remove = s6d16d0_remove, + .driver = { + .name = "panel-samsung-s6d16d0", + .of_match_table = s6d16d0_of_match, + }, +}; +module_mipi_dsi_driver(s6d16d0_driver); + +MODULE_AUTHOR("Linus Wallei "); +MODULE_DESCRIPTION("MIPI-DSI s6d16d0 Panel Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3