From 8d715f0024f64ad1b1be85d8c081cf577944c847 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 18 Nov 2011 20:39:01 -0800 Subject: drm/i915: add multi-threaded forcewake support On IVB C0+ with newer BIOSes, the forcewake handshake has changed. There's now a bitfield for different driver components to keep the GT powered on. On Linux, we centralize forcewake handling in one place, so we still just need a single bit, but we need to use the new registers if MT forcewake is enabled. This needs testing on affected machines. Please reply with your tested-by if you had problems after a BIOS upgrade and this patch fixes them. v2: force MT mode. shift by 16 v3: set MT force wake bits then check ECOBUS Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42923 Tested-by: Manoj Iyer Tested-by: Robert Hooker Tested-by: Keith Packard Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e77a863a3833..633c69365388 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8491,6 +8491,28 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { + dev_priv->display.force_wake_get = __gen6_gt_force_wake_get; + dev_priv->display.force_wake_put = __gen6_gt_force_wake_put; + + /* IVB configs may use multi-threaded forcewake */ + if (IS_IVYBRIDGE(dev)) { + u32 ecobus; + + mutex_lock(&dev->struct_mutex); + __gen6_gt_force_wake_mt_get(dev_priv); + ecobus = I915_READ(ECOBUS); + __gen6_gt_force_wake_mt_put(dev_priv); + mutex_unlock(&dev->struct_mutex); + + if (ecobus & FORCEWAKE_MT_ENABLE) { + DRM_DEBUG_KMS("Using MT version of forcewake\n"); + dev_priv->display.force_wake_get = + __gen6_gt_force_wake_mt_get; + dev_priv->display.force_wake_put = + __gen6_gt_force_wake_mt_put; + } + } + if (HAS_PCH_IBX(dev)) dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; else if (HAS_PCH_CPT(dev)) -- cgit v1.2.3 From c0f372b3746d4ede07b2ace2beabd38d9c045b25 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 16 Nov 2011 22:24:52 -0800 Subject: drm/i915: By default, enable RC6 on IVB and SNB when reasonable RC6 should always work on IVB, and should work on SNB whenever IO remapping is disabled. RC6 never works on Ironlake. Make the default value for the parameter follow these guidelines. Setting the value to either 0 or 1 will force the specified behavior. Signed-off-by: Keith Packard Reviewed-by: Kenneth Graunke Reviewed-by: Eugeni Dodonov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Cc: Ted Phelps Cc: Peter Cc: Lukas Hejtmanek Cc: Andrew Lutomirski --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_display.c | 33 ++++++++++++++++++++++++++++++--- 3 files changed, 33 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 28836fe72211..47a42eb6cc43 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -63,10 +63,10 @@ module_param_named(semaphores, i915_semaphores, int, 0600); MODULE_PARM_DESC(semaphores, "Use semaphores for inter-ring sync (default: false)"); -unsigned int i915_enable_rc6 __read_mostly = 0; +int i915_enable_rc6 __read_mostly = -1; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, - "Enable power-saving render C-state 6 (default: true)"); + "Enable power-saving render C-state 6 (default: -1 (use per-chip default)"); int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 39a72f642b33..6bcafb5bf7fe 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1006,7 +1006,7 @@ extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; -extern unsigned int i915_enable_rc6 __read_mostly; +extern int i915_enable_rc6 __read_mostly; extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 633c69365388..d544de9e6634 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -38,8 +38,8 @@ #include "i915_drv.h" #include "i915_trace.h" #include "drm_dp_helper.h" - #include "drm_crtc_helper.h" +#include #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) @@ -7887,6 +7887,33 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } +static bool intel_enable_rc6(struct drm_device *dev) +{ + /* + * Respect the kernel parameter if it is set + */ + if (i915_enable_rc6 >= 0) + return i915_enable_rc6; + + /* + * Disable RC6 on Ironlake + */ + if (INTEL_INFO(dev)->gen == 5) + return 0; + + /* + * Enable rc6 on Sandybridge if DMA remapping is disabled + */ + if (INTEL_INFO(dev)->gen == 6) { + DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", + intel_iommu_enabled ? "true" : "false", + !intel_iommu_enabled ? "en" : "dis"); + return !intel_iommu_enabled; + } + DRM_DEBUG_DRIVER("RC6 enabled\n"); + return 1; +} + void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); @@ -7923,7 +7950,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (i915_enable_rc6) + if (intel_enable_rc6(dev_priv->dev)) rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | GEN6_RC_CTL_RC6_ENABLE; @@ -8372,7 +8399,7 @@ void ironlake_enable_rc6(struct drm_device *dev) /* rc6 disabled by default due to repeated reports of hanging during * boot and resume. */ - if (!i915_enable_rc6) + if (!intel_enable_rc6(dev)) return; mutex_lock(&dev->struct_mutex); -- cgit v1.2.3 From 7317c75e66fce0c9f82fbe6f72f7e5256b315422 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 29 Aug 2011 09:45:28 -0700 Subject: drm/i915: don't set unpin_work if vblank_get fails This fixes a race where we may try to finish a page flip and decrement the refcount even if our vblank_get failed and we ended up with a spurious flip pending interrupt. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211. Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d544de9e6634..91b5f8707a62 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7189,11 +7189,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); + ret = drm_vblank_get(dev, intel_crtc->pipe); + if (ret) + goto free_work; + /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); + drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; @@ -7212,10 +7217,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, crtc->fb = fb; - ret = drm_vblank_get(dev, intel_crtc->pipe); - if (ret) - goto cleanup_objs; - work->pending_flip_obj = obj; work->enable_stall_check = true; @@ -7238,7 +7239,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); -cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); @@ -7247,6 +7247,8 @@ cleanup_objs: intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); + drm_vblank_put(dev, intel_crtc->pipe); +free_work: kfree(work); return ret; -- cgit v1.2.3 From 3b5c78a35cf7511c15e09a9b0ffab290a42d9bcf Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Tue, 13 Dec 2011 15:41:00 -0800 Subject: drm/i915/dp: Dither down to 6bpc if it makes the mode fit Some active adaptors (VGA usually) only have two lanes at 2.7GHz. That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc. Fixes Asus UX31 panel being black at startup due to no valid modes since dc22ee6fc18ce0f15424e753e8473c306ece95c1. v2: Rebased to current code, resulting in the fix applying to EDP panels as well. Also changed from spatio-temporal to just spatial dithering on pre-ironlake, to be conssitent (and less visual flicker) Signed-off-by: Adam Jackson Signed-off-by: Eric Anholt Tested-by: Eric Anholt Tested-by: Dirk Hohndel Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++++++++++++------ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_display.c') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b5f8707a62..d809b038ca88 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4670,6 +4670,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) /** * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send * @crtc: CRTC structure + * @mode: requested mode * * A pipe may be connected to one or more outputs. Based on the depth of the * attached framebuffer, choose a good color depth to use on the pipe. @@ -4681,13 +4682,15 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc * Displays may support a restricted set as well, check EDID and clamp as * appropriate. + * DP may want to dither down to 6bpc to fit larger modes * * RETURNS: * Dithering requirement (i.e. false if display bpc and pipe bpc match, * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, - unsigned int *pipe_bpp) + unsigned int *pipe_bpp, + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4758,6 +4761,11 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); + display_bpc = 6; + } + /* * We could just drive the pipe at the highest bpc all the time and * enable dithering as needed, but that costs bandwidth. So choose @@ -5019,6 +5027,16 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } + /* default to 8bpc */ + pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); + if (is_dp) { + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + pipeconf |= PIPECONF_BPP_6 | + PIPECONF_DITHER_EN | + PIPECONF_DITHER_TYPE_SP; + } + } + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); @@ -5480,7 +5498,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp); + dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 294f55788f0b..92b041b66e49 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -208,13 +208,15 @@ intel_dp_link_clock(uint8_t link_bw) */ static int -intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock) +intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp) { struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int bpp = 24; - if (intel_crtc) + if (check_bpp) + bpp = check_bpp; + else if (intel_crtc) bpp = intel_crtc->bpp; return (pixel_clock * bpp + 9) / 10; @@ -233,6 +235,7 @@ intel_dp_mode_valid(struct drm_connector *connector, struct intel_dp *intel_dp = intel_attached_dp(connector); int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); int max_lanes = intel_dp_max_lane_count(intel_dp); + int max_rate, mode_rate; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) @@ -242,9 +245,17 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - if (intel_dp_link_required(intel_dp, mode->clock) - > intel_dp_max_data_rate(max_link_clock, max_lanes)) - return MODE_CLOCK_HIGH; + mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0); + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + + if (mode_rate > max_rate) { + mode_rate = intel_dp_link_required(intel_dp, + mode->clock, 18); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + else + mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC; + } if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -672,6 +683,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; + int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -689,7 +701,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); - if (intel_dp_link_required(intel_dp, mode->clock) + if (intel_dp_link_required(intel_dp, mode->clock, bpp) <= link_avail) { intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index bd9a604b73da..a1b4343814e8 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -110,6 +110,7 @@ /* drm_display_mode->private_flags */ #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0) #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT) +#define INTEL_MODE_DP_FORCE_6BPC (0x10) static inline void intel_mode_set_pixel_multiplier(struct drm_display_mode *mode, -- cgit v1.2.3