From cc38ef936840ac29204d806deb4d1836ec509594 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 4 Feb 2022 13:02:25 +0000 Subject: gpio: sifive: use the correct register to read output values Setting the output of a GPIO to 1 using gpiod_set_value(), followed by reading the same GPIO using gpiod_get_value(), will currently yield an incorrect result. This is because the SiFive GPIO device stores the output values in reg_set, not reg_dat. Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the generic driver reads the correct register. Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by: Niklas Cassel Reviewed-by: Linus Walleij [Bartosz: added the Fixes tag] Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-sifive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c index 403f9e833d6a..7d82388b4ab7 100644 --- a/drivers/gpio/gpio-sifive.c +++ b/drivers/gpio/gpio-sifive.c @@ -223,7 +223,7 @@ static int sifive_gpio_probe(struct platform_device *pdev) NULL, chip->base + SIFIVE_GPIO_OUTPUT_EN, chip->base + SIFIVE_GPIO_INPUT_EN, - 0); + BGPIOF_READ_OUTPUT_REG_SET); if (ret) { dev_err(dev, "unable to init generic GPIO\n"); return ret; -- cgit v1.2.3