From c3eea1942a16db52ebea0382bd5826f75b9b7e9b Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Wed, 10 Feb 2016 13:26:21 -0600 Subject: EDAC, altera: Add Altera L2 cache and OCRAM support Add L2 Cache and On-Chip RAM EDAC support for the Altera SoCs. The SDRAM controller is using the Memory Controller model. Each type of ECC is individually configurable. Signed-off-by: Thor Thayer Cc: devicetree@vger.kernel.org Cc: dinguyen@opensource.altera.com Cc: galak@codeaurora.org Cc: grant.likely@linaro.org Cc: ijc+devicetree@hellion.org.uk Cc: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk Cc: linux-doc@vger.kernel.org Cc: linux-edac Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab Cc: pawel.moll@arm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1455132384-17108-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov --- drivers/edac/Kconfig | 26 ++- drivers/edac/Makefile | 2 +- drivers/edac/altera_edac.c | 492 ++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 512 insertions(+), 8 deletions(-) (limited to 'drivers/edac') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index ef25000a5bc6..37755e63cc28 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -367,14 +367,30 @@ config EDAC_OCTEON_PCI Support for error detection and correction on the Cavium Octeon family of SOCs. -config EDAC_ALTERA_MC - bool "Altera SDRAM Memory Controller EDAC" +config EDAC_ALTERA + bool "Altera SOCFPGA ECC" depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA help Support for error detection and correction on the - Altera SDRAM memory controller. Note that the - preloader must initialize the SDRAM before loading - the kernel. + Altera SOCs. This must be selected for SDRAM ECC. + Note that the preloader must initialize the SDRAM + before loading the kernel. + +config EDAC_ALTERA_L2C + bool "Altera L2 Cache ECC" + depends on EDAC_ALTERA=y + select CACHE_L2X0 + help + Support for error detection and correction on the + Altera L2 cache Memory for Altera SoCs. This option + requires L2 cache so it will force that selection. + +config EDAC_ALTERA_OCRAM + bool "Altera On-Chip RAM ECC" + depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR + help + Support for error detection and correction on the + Altera On-Chip RAM Memory for Altera SoCs. config EDAC_SYNOPSYS tristate "Synopsys DDR Memory Controller" diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index be163e20fe56..f9e4a3e0e6e9 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -67,6 +67,6 @@ obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o -obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o +obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c index 929640981d8a..63e42098726d 100644 --- a/drivers/edac/altera_edac.c +++ b/drivers/edac/altera_edac.c @@ -1,5 +1,5 @@ /* - * Copyright Altera Corporation (C) 2014-2015. All rights reserved. + * Copyright Altera Corporation (C) 2014-2016. All rights reserved. * Copyright 2011-2012 Calxeda, Inc. * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,10 @@ * Adapted from the highbank_mc_edac driver. */ +#include #include #include +#include #include #include #include @@ -34,6 +36,7 @@ #define EDAC_MOD_STR "altera_edac" #define EDAC_VERSION "1" +#define EDAC_DEVICE "Altera" static const struct altr_sdram_prv_data c5_data = { .ecc_ctrl_offset = CV_CTLCFG_OFST, @@ -75,6 +78,31 @@ static const struct altr_sdram_prv_data a10_data = { .ue_set_mask = A10_DIAGINT_TDERRA_MASK, }; +/************************** EDAC Device Defines **************************/ + +/* OCRAM ECC Management Group Defines */ +#define ALTR_MAN_GRP_OCRAM_ECC_OFFSET 0x04 +#define ALTR_OCR_ECC_EN BIT(0) +#define ALTR_OCR_ECC_INJS BIT(1) +#define ALTR_OCR_ECC_INJD BIT(2) +#define ALTR_OCR_ECC_SERR BIT(3) +#define ALTR_OCR_ECC_DERR BIT(4) + +/* L2 ECC Management Group Defines */ +#define ALTR_MAN_GRP_L2_ECC_OFFSET 0x00 +#define ALTR_L2_ECC_EN BIT(0) +#define ALTR_L2_ECC_INJS BIT(1) +#define ALTR_L2_ECC_INJD BIT(2) + +#define ALTR_UE_TRIGGER_CHAR 'U' /* Trigger for UE */ +#define ALTR_TRIGGER_READ_WRD_CNT 32 /* Line size x 4 */ +#define ALTR_TRIG_OCRAM_BYTE_SIZE 128 /* Line size x 4 */ +#define ALTR_TRIG_L2C_BYTE_SIZE 4096 /* Full Page */ + +/*********************** EDAC Memory Controller Functions ****************/ + +/* The SDRAM controller uses the EDAC Memory Controller framework. */ + static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id) { struct mem_ctl_info *mci = dev_id; @@ -504,6 +532,466 @@ static struct platform_driver altr_sdram_edac_driver = { module_platform_driver(altr_sdram_edac_driver); +/************************* EDAC Parent Probe *************************/ + +static const struct of_device_id altr_edac_device_of_match[]; + +static const struct of_device_id altr_edac_of_match[] = { + { .compatible = "altr,socfpga-ecc-manager" }, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_of_match); + +static int altr_edac_probe(struct platform_device *pdev) +{ + of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match, + NULL, &pdev->dev); + return 0; +} + +static struct platform_driver altr_edac_driver = { + .probe = altr_edac_probe, + .driver = { + .name = "socfpga_ecc_manager", + .of_match_table = altr_edac_of_match, + }, +}; +module_platform_driver(altr_edac_driver); + +/************************* EDAC Device Functions *************************/ + +/* + * EDAC Device Functions (shared between various IPs). + * The discrete memories use the EDAC Device framework. The probe + * and error handling functions are very similar between memories + * so they are shared. The memory allocation and freeing for EDAC + * trigger testing are different for each memory. + */ + +const struct edac_device_prv_data ocramecc_data; +const struct edac_device_prv_data l2ecc_data; + +struct edac_device_prv_data { + int (*setup)(struct platform_device *pdev, void __iomem *base); + int ce_clear_mask; + int ue_clear_mask; + char dbgfs_name[20]; + void * (*alloc_mem)(size_t size, void **other); + void (*free_mem)(void *p, size_t size, void *other); + int ecc_enable_mask; + int ce_set_mask; + int ue_set_mask; + int trig_alloc_sz; +}; + +struct altr_edac_device_dev { + void __iomem *base; + int sb_irq; + int db_irq; + const struct edac_device_prv_data *data; + struct dentry *debugfs_dir; + char *edac_dev_name; +}; + +static irqreturn_t altr_edac_device_handler(int irq, void *dev_id) +{ + irqreturn_t ret_value = IRQ_NONE; + struct edac_device_ctl_info *dci = dev_id; + struct altr_edac_device_dev *drvdata = dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + + if (irq == drvdata->sb_irq) { + if (priv->ce_clear_mask) + writel(priv->ce_clear_mask, drvdata->base); + edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name); + ret_value = IRQ_HANDLED; + } else if (irq == drvdata->db_irq) { + if (priv->ue_clear_mask) + writel(priv->ue_clear_mask, drvdata->base); + edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name); + panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n"); + ret_value = IRQ_HANDLED; + } else { + WARN_ON(1); + } + + return ret_value; +} + +static ssize_t altr_edac_device_trig(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) + +{ + u32 *ptemp, i, error_mask; + int result = 0; + u8 trig_type; + unsigned long flags; + struct edac_device_ctl_info *edac_dci = file->private_data; + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + void *generic_ptr = edac_dci->dev; + + if (!user_buf || get_user(trig_type, user_buf)) + return -EFAULT; + + if (!priv->alloc_mem) + return -ENOMEM; + + /* + * Note that generic_ptr is initialized to the device * but in + * some alloc_functions, this is overridden and returns data. + */ + ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr); + if (!ptemp) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Inject: Buffer Allocation error\n"); + return -ENOMEM; + } + + if (trig_type == ALTR_UE_TRIGGER_CHAR) + error_mask = priv->ue_set_mask; + else + error_mask = priv->ce_set_mask; + + edac_printk(KERN_ALERT, EDAC_DEVICE, + "Trigger Error Mask (0x%X)\n", error_mask); + + local_irq_save(flags); + /* write ECC corrupted data out. */ + for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) { + /* Read data so we're in the correct state */ + rmb(); + if (ACCESS_ONCE(ptemp[i])) + result = -1; + /* Toggle Error bit (it is latched), leave ECC enabled */ + writel(error_mask, drvdata->base); + writel(priv->ecc_enable_mask, drvdata->base); + ptemp[i] = i; + } + /* Ensure it has been written out */ + wmb(); + local_irq_restore(flags); + + if (result) + edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n"); + + /* Read out written data. ECC error caused here */ + for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++) + if (ACCESS_ONCE(ptemp[i]) != i) + edac_printk(KERN_ERR, EDAC_DEVICE, + "Read doesn't match written data\n"); + + if (priv->free_mem) + priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr); + + return count; +} + +static const struct file_operations altr_edac_device_inject_fops = { + .open = simple_open, + .write = altr_edac_device_trig, + .llseek = generic_file_llseek, +}; + +static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci, + const struct edac_device_prv_data *priv) +{ + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + + if (!IS_ENABLED(CONFIG_EDAC_DEBUG)) + return; + + drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name); + if (!drvdata->debugfs_dir) + return; + + if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR, + drvdata->debugfs_dir, edac_dci, + &altr_edac_device_inject_fops)) + debugfs_remove_recursive(drvdata->debugfs_dir); +} + +static const struct of_device_id altr_edac_device_of_match[] = { +#ifdef CONFIG_EDAC_ALTERA_L2C + { .compatible = "altr,socfpga-l2-ecc", .data = (void *)&l2ecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_OCRAM + { .compatible = "altr,socfpga-ocram-ecc", + .data = (void *)&ocramecc_data }, +#endif + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_device_of_match); + +/* + * altr_edac_device_probe() + * This is a generic EDAC device driver that will support + * various Altera memory devices such as the L2 cache ECC and + * OCRAM ECC as well as the memories for other peripherals. + * Module specific initialization is done by passing the + * function index in the device tree. + */ +static int altr_edac_device_probe(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci; + struct altr_edac_device_dev *drvdata; + struct resource *r; + int res = 0; + struct device_node *np = pdev->dev.of_node; + char *ecc_name = (char *)np->name; + static int dev_instance; + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to open devm\n"); + return -ENOMEM; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to get mem resource\n"); + res = -ENODEV; + goto fail; + } + + if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r), + dev_name(&pdev->dev))) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error requesting mem region\n", ecc_name); + res = -EBUSY; + goto fail; + } + + dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name, + 1, ecc_name, 1, 0, NULL, 0, + dev_instance++); + + if (!dci) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: Unable to allocate EDAC device\n", ecc_name); + res = -ENOMEM; + goto fail; + } + + drvdata = dci->pvt_info; + dci->dev = &pdev->dev; + platform_set_drvdata(pdev, dci); + drvdata->edac_dev_name = ecc_name; + + drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!drvdata->base) + goto fail1; + + /* Get driver specific data for this EDAC device */ + drvdata->data = of_match_node(altr_edac_device_of_match, np)->data; + + /* Check specific dependencies for the module */ + if (drvdata->data->setup) { + res = drvdata->data->setup(pdev, drvdata->base); + if (res) + goto fail1; + } + + drvdata->sb_irq = platform_get_irq(pdev, 0); + res = devm_request_irq(&pdev->dev, drvdata->sb_irq, + altr_edac_device_handler, + 0, dev_name(&pdev->dev), dci); + if (res) + goto fail1; + + drvdata->db_irq = platform_get_irq(pdev, 1); + res = devm_request_irq(&pdev->dev, drvdata->db_irq, + altr_edac_device_handler, + 0, dev_name(&pdev->dev), dci); + if (res) + goto fail1; + + dci->mod_name = "Altera ECC Manager"; + dci->dev_name = drvdata->edac_dev_name; + + res = edac_device_add_device(dci); + if (res) + goto fail1; + + altr_create_edacdev_dbgfs(dci, drvdata->data); + + devres_close_group(&pdev->dev, NULL); + + return 0; + +fail1: + edac_device_free_ctl_info(dci); +fail: + devres_release_group(&pdev->dev, NULL); + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error setting up EDAC device: %d\n", ecc_name, res); + + return res; +} + +static int altr_edac_device_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); + struct altr_edac_device_dev *drvdata = dci->pvt_info; + + debugfs_remove_recursive(drvdata->debugfs_dir); + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + + return 0; +} + +static struct platform_driver altr_edac_device_driver = { + .probe = altr_edac_device_probe, + .remove = altr_edac_device_remove, + .driver = { + .name = "altr_edac_device", + .of_match_table = altr_edac_device_of_match, + }, +}; +module_platform_driver(altr_edac_device_driver); + +/*********************** OCRAM EDAC Device Functions *********************/ + +#ifdef CONFIG_EDAC_ALTERA_OCRAM + +static void *ocram_alloc_mem(size_t size, void **other) +{ + struct device_node *np; + struct gen_pool *gp; + void *sram_addr; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) + return NULL; + + gp = of_gen_pool_get(np, "iram", 0); + of_node_put(np); + if (!gp) + return NULL; + + sram_addr = (void *)gen_pool_alloc(gp, size); + if (!sram_addr) + return NULL; + + memset(sram_addr, 0, size); + /* Ensure data is written out */ + wmb(); + + /* Remember this handle for freeing later */ + *other = gp; + + return sram_addr; +} + +static void ocram_free_mem(void *p, size_t size, void *other) +{ + gen_pool_free((struct gen_pool *)other, (u32)p, size); +} + +/* + * altr_ocram_check_deps() + * Test for OCRAM cache ECC dependencies upon entry because + * platform specific startup should have initialized the + * On-Chip RAM memory and enabled the ECC. + * Can't turn on ECC here because accessing un-initialized + * memory will cause CE/UE errors possibly causing an ABORT. + */ +static int altr_ocram_check_deps(struct platform_device *pdev, + void __iomem *base) +{ + if (readl(base) & ALTR_OCR_ECC_EN) + return 0; + + edac_printk(KERN_ERR, EDAC_DEVICE, + "OCRAM: No ECC present or ECC disabled.\n"); + return -ENODEV; +} + +const struct edac_device_prv_data ocramecc_data = { + .setup = altr_ocram_check_deps, + .ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR), + .ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR), + .dbgfs_name = "altr_ocram_trigger", + .alloc_mem = ocram_alloc_mem, + .free_mem = ocram_free_mem, + .ecc_enable_mask = ALTR_OCR_ECC_EN, + .ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS), + .ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD), + .trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE, +}; + +#endif /* CONFIG_EDAC_ALTERA_OCRAM */ + +/********************* L2 Cache EDAC Device Functions ********************/ + +#ifdef CONFIG_EDAC_ALTERA_L2C + +static void *l2_alloc_mem(size_t size, void **other) +{ + struct device *dev = *other; + void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL); + + if (!ptemp) + return NULL; + + /* Make sure everything is written out */ + wmb(); + + /* + * Clean all cache levels up to LoC (includes L2) + * This ensures the corrupted data is written into + * L2 cache for readback test (which causes ECC error). + */ + flush_cache_all(); + + return ptemp; +} + +static void l2_free_mem(void *p, size_t size, void *other) +{ + struct device *dev = other; + + if (dev && p) + devm_kfree(dev, p); +} + +/* + * altr_l2_check_deps() + * Test for L2 cache ECC dependencies upon entry because + * platform specific startup should have initialized the L2 + * memory and enabled the ECC. + * Bail if ECC is not enabled. + * Note that L2 Cache Enable is forced at build time. + */ +static int altr_l2_check_deps(struct platform_device *pdev, + void __iomem *base) +{ + if (readl(base) & ALTR_L2_ECC_EN) + return 0; + + edac_printk(KERN_ERR, EDAC_DEVICE, + "L2: No ECC present, or ECC disabled\n"); + return -ENODEV; +} + +const struct edac_device_prv_data l2ecc_data = { + .setup = altr_l2_check_deps, + .ce_clear_mask = 0, + .ue_clear_mask = 0, + .dbgfs_name = "altr_l2_trigger", + .alloc_mem = l2_alloc_mem, + .free_mem = l2_free_mem, + .ecc_enable_mask = ALTR_L2_ECC_EN, + .ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS), + .ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD), + .trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE, +}; + +#endif /* CONFIG_EDAC_ALTERA_L2C */ + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Thor Thayer"); -MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller"); +MODULE_DESCRIPTION("EDAC Driver for Altera Memories"); -- cgit v1.2.3