From 6099e419ae7e1dd44c808693bd1905d22a6db15f Mon Sep 17 00:00:00 2001 From: Arvind R Date: Wed, 12 Oct 2011 10:28:56 +0530 Subject: edac:i82975x fix 32bit compile and cleanup the clean up achieves: 1. fix warning on 32-bit compile 2. reorder info extraction for clarity 3. add error-trap diagnostic message 4. handle ALL modes of memory configurations Signed-off-by: Arvind R. Signed-off-by: Jiri Kosina --- drivers/edac/i82975x_edac.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers/edac') diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index a5da732fe5b2..4184e0171f00 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -277,11 +277,9 @@ static void i82975x_get_error_info(struct mem_ctl_info *mci, static int i82975x_process_error_info(struct mem_ctl_info *mci, struct i82975x_error_info *info, int handle_errors) { - int row, multi_chan, chan; + int row, chan; unsigned long offst, page; - multi_chan = mci->csrows[0].nr_channels - 1; - if (!(info->errsts2 & 0x0003)) return 0; @@ -294,20 +292,30 @@ static int i82975x_process_error_info(struct mem_ctl_info *mci, } page = (unsigned long) info->eap; - if (info->xeap & 1) - page |= 0x100000000ul; - chan = page & 1; page >>= 1; - offst = page & ((1 << PAGE_SHIFT) - 1); - page >>= PAGE_SHIFT; + if (info->xeap & 1) + page |= 0x80000000; + page >>= (PAGE_SHIFT - 1); row = edac_mc_find_csrow_by_page(mci, page); + if (row == -1) { + i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n" + "\tXEAP=%u\n" + "\t EAP=0x%08x\n" + "\tPAGE=0x%08x\n", + (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page); + return 0; + } + chan = (mci->csrows[row].nr_channels == 1) ? 0 : info->eap & 1; + offst = info->eap + & ((1 << PAGE_SHIFT) - + (1 << mci->csrows[row].grain)); + if (info->errsts & 0x0002) edac_mc_handle_ue(mci, page, offst , row, "i82975x UE"); else edac_mc_handle_ce(mci, page, offst, info->derrsyn, row, - multi_chan ? chan : 0, - "i82975x CE"); + chan, "i82975x CE"); return 1; } @@ -410,7 +418,7 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, csrow->last_page = cumul_size - 1; csrow->nr_pages = cumul_size - last_cumul_size; last_cumul_size = cumul_size; - csrow->grain = 1 << 6; /* I82975X_EAP has 64B resolution */ + csrow->grain = 1 << 7; /* 128Byte cache-line resolution */ csrow->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ csrow->dtype = i82975x_dram_type(mch_window, index); csrow->edac_mode = EDAC_SECDED; /* only supported */ -- cgit v1.2.3 From 42b2aa86c6670347a2a07e6d7af0e0ecc8fdbff9 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Mon, 28 Nov 2011 20:31:00 -0800 Subject: treewide: Fix typos in various parts of the kernel, and fix some comments. The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- arch/arm/plat-omap/include/plat/serial.h | 2 +- arch/powerpc/include/asm/io.h | 2 +- arch/powerpc/include/asm/keylargo.h | 2 +- arch/powerpc/mm/numa.c | 2 +- arch/sparc/kernel/smp_64.c | 2 +- drivers/acpi/acpica/hwxface.c | 2 +- drivers/block/xen-blkback/xenbus.c | 2 +- drivers/char/ipmi/ipmi_bt_sm.c | 2 +- drivers/edac/ppc4xx_edac.c | 2 +- drivers/media/video/zoran/zoran_driver.c | 2 +- drivers/message/fusion/lsi/mpi_ioc.h | 2 +- drivers/net/irda/nsc-ircc.c | 2 +- drivers/net/irda/via-ircc.c | 4 ++-- drivers/net/irda/w83977af_ir.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 2 +- drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 4 ++-- drivers/parport/parport_mfc3.c | 2 +- drivers/scsi/aic7xxx/aicasm/aicasm.c | 2 +- drivers/scsi/ips.c | 2 +- drivers/scsi/qla4xxx/ql4_fw.h | 2 +- drivers/scsi/vmw_pvscsi.c | 2 +- drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +- drivers/staging/cxt1e1/libsbew.h | 2 +- drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++-- drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +- drivers/staging/iio/industrialio-trigger.c | 2 +- drivers/staging/sep/sep_driver.c | 2 +- drivers/staging/tidspbridge/Kconfig | 2 +- drivers/staging/tidspbridge/rmgr/dbdcd.c | 2 +- drivers/usb/host/hwa-hc.c | 2 +- drivers/usb/host/imx21-hcd.c | 2 +- drivers/usb/otg/fsl_otg.c | 2 +- drivers/uwb/i1480/dfu/usb.c | 2 +- fs/btrfs/inode.c | 2 +- fs/ext3/inode.c | 2 +- fs/ext4/inode.c | 2 +- fs/nfsd/nfs4state.c | 2 +- fs/ocfs2/file.c | 2 +- fs/xfs/xfs_file.c | 6 +++--- fs/xfs/xfs_log_cil.c | 2 +- include/drm/drmP.h | 2 +- include/linux/wanrouter.h | 2 +- include/net/mac80211.h | 2 +- net/ipv4/ip_fragment.c | 2 +- net/mac80211/work.c | 2 +- net/sctp/endpointola.c | 2 +- 46 files changed, 51 insertions(+), 51 deletions(-) (limited to 'drivers/edac') diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 1ab9fd6abe6d..ac44bde5d36d 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -2,7 +2,7 @@ * arch/arm/plat-omap/include/mach/serial.h * * Copyright (C) 2009 Texas Instruments - * Addded OMAP4 support- Santosh Shilimkar + * Added OMAP4 support- Santosh Shilimkar * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 45698d55cd6a..a3855b81eada 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx") #endif /* CONFIG_PPC32 */ /* The "__do_*" operations below provide the actual "base" implementation - * for each of the defined acccessor. Some of them use the out_* functions + * for each of the defined accessors. Some of them use the out_* functions * directly, some of them still use EEH, though we might change that in the * future. Those macros below provide the necessary argument swapping and * handling of the IO base for PIO. diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h index d8520ef121f9..fc195d0b3c34 100644 --- a/arch/powerpc/include/asm/keylargo.h +++ b/arch/powerpc/include/asm/keylargo.h @@ -51,7 +51,7 @@ #define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) -/* Hrm... this one is only to be used on Pismo. It seeem to also +/* Hrm... this one is only to be used on Pismo. It seems to also * control the timebase enable on other machines. Still to be * experimented... --BenH. */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b22a83a91cb8..ae0a611f5741 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -521,7 +521,7 @@ static int of_get_assoc_arrays(struct device_node *memory, aa->n_arrays = *prop++; aa->array_sz = *prop++; - /* Now that we know the number of arrrays and size of each array, + /* Now that we know the number of arrays and size of each array, * revalidate the size of the property read in. */ if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int)) diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 75607724d290..3b1bd7c50164 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -840,7 +840,7 @@ static void tsb_sync(void *info) struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()]; struct mm_struct *mm = info; - /* It is not valid to test "currrent->active_mm == mm" here. + /* It is not valid to test "current->active_mm == mm" here. * * The value of "current" is not changed atomically with * switch_mm(). But that's OK, we just need to check the diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index c2793a82f120..d707756228c2 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -356,7 +356,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register) * * PARAMETERS: register_id - ID of ACPI Bit Register to access * Value - Value to write to the register, in bit - * position zero. The bit is automaticallly + * position zero. The bit is automatically * shifted to the correct position. * * RETURN: Status diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index f759ad4584c3..8069322e4c9e 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -613,7 +613,7 @@ static void frontend_changed(struct xenbus_device *dev, case XenbusStateConnected: /* * Ensure we connect even when two watches fire in - * close successsion and we miss the intermediate value + * close succession and we miss the intermediate value * of frontend_state. */ if (dev->state == XenbusStateConnected) diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 3ed20e8abc0d..cdd4c09fda96 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_CONTROL(BT_H_BUSY); /* set */ /* - * Uncached, ordered writes should just proceeed serially but + * Uncached, ordered writes should just proceed serially but * some BMCs don't clear B2H_ATN with one hit. Fast-path a * workaround without too much penalty to the general case. */ diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c index 38400963e245..fc757069c6af 100644 --- a/drivers/edac/ppc4xx_edac.c +++ b/drivers/edac/ppc4xx_edac.c @@ -142,7 +142,7 @@ /* * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are - * indirectly acccessed and have a base and length defined by the + * indirectly accessed and have a base and length defined by the * device tree. The base can be anything; however, we expect the * length to be precisely two registers, the first for the address * window and the second for the data window. diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index d4d05d2ace65..f6d26419445e 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) if (zoran_formats[i].flags & flag && num++ == fmt->index) { strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description) - 1); - /* fmt struct pre-zeroed, so adding '\0' not neeed */ + /* fmt struct pre-zeroed, so adding '\0' not needed */ fmt->pixelformat = zoran_formats[i].fourcc; if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index fd6222882a0e..19fb21b8f0ce 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -857,7 +857,7 @@ typedef struct _EVENT_DATA_SAS_DISCOVERY #define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000) #define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16) -/* SAS Discovery Errror Event data */ +/* SAS Discovery Error Event data */ typedef struct _EVENT_DATA_DISCOVERY_ERROR { diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index b56636da6cc3..2a4f2f153244 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -1664,7 +1664,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self) switch_bank(iobase, BANK0); outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR); - /* Check for underrrun! */ + /* Check for underrun! */ if (inb(iobase+ASCR) & ASCR_TXUR) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++; diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 6d6479049aa1..2d456dd164fb 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -942,14 +942,14 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) iobase = self->io.fir_base; /* Disable DMA */ // DisableDmaChannel(self->io.dma); - /* Check for underrrun! */ + /* Check for underrun! */ /* Clear bit, by writing 1 into it */ Tx_status = GetTXStatus(iobase); if (Tx_status & 0x08) { self->netdev->stats.tx_errors++; self->netdev->stats.tx_fifo_errors++; hwreset(self); -// how to clear underrrun ? + /* how to clear underrun? */ } else { self->netdev->stats.tx_packets++; ResetChip(iobase, 3); diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index c4366601b067..7d43506c7032 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -677,7 +677,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) switch_bank(iobase, SET0); outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR); - /* Check for underrrun! */ + /* Check for underrun! */ if (inb(iobase+AUDR) & AUDR_UNDR) { IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ ); diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index c421a6141854..c806d4550212 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -75,7 +75,7 @@ * device is up and running or shutdown (through ifconfig up / * down). Bus-generic only. * - * - control ops: control.c - implements various commmands for + * - control ops: control.c - implements various commands for * controlling the device. bus-generic only. * * - device model glue: driver.c - implements helpers for the diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f5bd3a3cd34a..9d89d7ccdafb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -466,8 +466,8 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) bool int_migration = *(bool *) (val); if (int_migration) { - /* Set interrrupt migration timer and - * corresponging Tx/Rx counter. + /* Set interrupt migration timer and + * corresponding Tx/Rx counter. * timer 25ns*0xfa0=100us for 0xf packets. * 0x306:Rx, 0x307:Tx */ rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c index 362db31d8ca6..1c0c642b3e23 100644 --- a/drivers/parport/parport_mfc3.c +++ b/drivers/parport/parport_mfc3.c @@ -397,7 +397,7 @@ static void __exit parport_mfc3_exit(void) MODULE_AUTHOR("Joerg Dorchain "); -MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port"); +MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port"); MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port"); MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c index e4a778720301..2e3117aa382f 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm.c +++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c @@ -1,5 +1,5 @@ /* - * Aic7xxx SCSI host adapter firmware asssembler + * Aic7xxx SCSI host adapter firmware assembler * * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. * Copyright (c) 2001, 2002 Adaptec Inc. diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 218f71a8726e..d77891e5683b 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -4494,7 +4494,7 @@ ips_init_scb(ips_ha_t * ha, ips_scb_t * scb) /* */ /* Initialize a CCB to default values */ /* */ -/* ASSUMED to be callled from within a lock */ +/* ASSUMED to be called from within a lock */ /* */ /****************************************************************************/ static ips_scb_t * diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index cbd5a20dbbd1..866af45b3d6c 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -744,7 +744,7 @@ struct dev_db_entry { uint8_t res4[0x36]; /* 8A-BF */ uint8_t iscsi_name[0xE0]; /* C0-19F : xxzzy Make this a * pointer to a string so we - * don't have to reserve soooo + * don't have to reserve so * much RAM */ uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */ uint8_t res5[0x10]; /* 1B0-1BF */ diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index a18996d24466..7264116185d5 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -1144,7 +1144,7 @@ static void pvscsi_release_resources(struct pvscsi_adapter *adapter) * * These are statically allocated. Trying to be clever was not worth it. * - * Dynamic allocation can fail, and we can't go deeep into the memory + * Dynamic allocation can fail, and we can't go deep into the memory * allocator, since we're a SCSI driver, and trying too hard to allocate * memory might generate disk I/O. We also don't want to fail disk I/O * in that case because we can't get an allocation - the I/O could be diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index c75a1a1fd775..f9545b064eaf 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -3598,7 +3598,7 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) n = comedi_buf_write_alloc(s->async, (7 + 12) * sizeof(unsigned int)); - /* If not enougth memory available, event is set to Comedi Buffer Errror */ + /* If not enough memory available, event is set to Comedi Buffer Error */ if (n > ((7 + 12) * sizeof(unsigned int))) { printk("\ncomedi_buf_write_alloc n = %i", n); s->async->events |= COMEDI_CB_ERROR; diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h index 5c99646cd103..ae8f06d05bed 100644 --- a/drivers/staging/cxt1e1/libsbew.h +++ b/drivers/staging/cxt1e1/libsbew.h @@ -323,7 +323,7 @@ struct sbecom_port_param #define CFG_CH_DINV_TX 0x02 -/* Posssible resettable chipsets/functions */ +/* Possible resettable chipsets/functions */ #define RESET_DEV_TEMUX 1 #define RESET_DEV_TECT3 RESET_DEV_TEMUX #define RESET_DEV_PLL 2 diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index b3d743a3d308..917bbb082a6e 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -344,10 +344,10 @@ static void ft1000_reset_asic(struct net_device *dev) } mdelay(1); if (info->AsicID == ELECTRABUZZ_ID) { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff); } else { - // set watermark to -1 in order to not generate an interrrupt + // set watermark to -1 in order to not generate an interrupt ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff); } // clear interrupts diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c index aaf44c359827..43b1d363107e 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c @@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev) mdelay(1); - /* set watermark to -1 in order to not generate an interrrupt */ + /* set watermark to -1 in order to not generate an interrupt */ ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK); /* clear interrupts */ diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c index 2c626e0cb29c..68a4d4e8c635 100644 --- a/drivers/staging/iio/industrialio-trigger.c +++ b/drivers/staging/iio/industrialio-trigger.c @@ -295,7 +295,7 @@ void iio_dealloc_pollfunc(struct iio_poll_func *pf) EXPORT_SYMBOL_GPL(iio_dealloc_pollfunc); /** - * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger + * iio_trigger_read_current() - trigger consumer sysfs query which trigger * * For trigger consumers the current_trigger interface allows the trigger * used by the device to be queried. diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c index 8ac3faea2d2f..f47571ea745d 100644 --- a/drivers/staging/sep/sep_driver.c +++ b/drivers/staging/sep/sep_driver.c @@ -1235,7 +1235,7 @@ static void sep_build_lli_table(struct sep_device *sep, /* Counter of lli array entry */ u32 array_counter; - /* Init currrent table data size and lli array entry counter */ + /* Init current table data size and lli array entry counter */ curr_table_data_size = 0; array_counter = 0; *num_table_entries_ptr = 1; diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 93de4f2e8bf8..21a559ecbbb1 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -78,7 +78,7 @@ config TIDSPBRIDGE_NTFY_PWRERR bool "Notify power errors" depends on TIDSPBRIDGE help - Enable notifications to registered clients on the event of power errror + Enable notifications to registered clients on the event of power error trying to suspend bridge driver. Say Y, to signal this event as a fatal error, this will require a bridge restart to recover. diff --git a/drivers/staging/tidspbridge/rmgr/dbdcd.c b/drivers/staging/tidspbridge/rmgr/dbdcd.c index a7e407e25187..fda240214cd6 100644 --- a/drivers/staging/tidspbridge/rmgr/dbdcd.c +++ b/drivers/staging/tidspbridge/rmgr/dbdcd.c @@ -285,7 +285,7 @@ int dcd_enumerate_object(s32 index, enum dsp_dcdobjtype obj_type, enum_refs = 0; /* - * TODO: Revisit, this is not an errror case but code + * TODO: Revisit, this is not an error case but code * expects non-zero value. */ status = ENODATA; diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 9bfac657572e..b5c56a99da02 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -481,7 +481,7 @@ static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, encryption_value = 0; } - /* Set the encryption type for commmunicating with the device */ + /* Set the encryption type for communicating with the device */ result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_SET_ENCRYPTION, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 2ee18cfa1efe..dbf0f156ed9e 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -473,7 +473,7 @@ static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) /* End handling */ /* =========================================== */ -/* Endpoint now idle - release it's ETD(s) or asssign to queued request */ +/* Endpoint now idle - release its ETD(s) or assign to queued request */ static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) { int i; diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/otg/fsl_otg.c index 0f420b25e9a9..2d9cc445fc73 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/otg/fsl_otg.c @@ -639,7 +639,7 @@ static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA) * Delayed pin detect interrupt processing. * * When the Mini-A cable is disconnected from the board, - * the pin-detect interrupt happens before the disconnnect + * the pin-detect interrupt happens before the disconnect * interrupts for the connected device(s). In order to * process the disconnect interrupt(s) prior to switching * roles, the pin-detect interrupts are delayed, and handled diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index ba8664328afa..a315d4d25cc0 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -104,7 +104,7 @@ void i1480_usb_destroy(struct i1480_usb *i1480_usb) * * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, * so we copy it to the local i1480 buffer before proceeding. In any - * case, we have a max size we can send, soooo. + * case, we have a max size we can send. */ static int i1480_usb_write(struct i1480 *i1480, u32 memory_address, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 116ab67a06df..c3308c38ae75 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1943,7 +1943,7 @@ enum btrfs_orphan_cleanup_state { }; /* - * This is called in transaction commmit time. If there are no orphan + * This is called in transaction commit time. If there are no orphan * files in the subvolume, it removes orphan item and frees block_rsv * structure. */ diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 85fe655fe3e0..15cb47088aac 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -2490,7 +2490,7 @@ int ext3_can_truncate(struct inode *inode) * transaction, and VFS/VM ensures that ext3_truncate() cannot run * simultaneously on behalf of the same inode. * - * As we work through the truncate and commmit bits of it to the journal there + * As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. * diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 240f6e2dc7ee..b1c57bf43132 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3502,7 +3502,7 @@ int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) * transaction, and VFS/VM ensures that ext4_truncate() cannot run * simultaneously on behalf of the same inode. * - * As we work through the truncate and commmit bits of it to the journal there + * As we work through the truncate and commit bits of it to the journal there * is one core, guiding principle: the file's tree must always be consistent on * disk. We must be able to restart the truncate after a crash. * diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 47e94e33a975..9ca16dc09e04 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -658,7 +658,7 @@ static int nfsd4_sanitize_slot_size(u32 size) /* * XXX: If we run out of reserved DRC memory we could (up to a point) * re-negotiate active sessions and reduce their slot usage to make - * rooom for new connections. For now we just fail the create session. + * room for new connections. For now we just fail the create session. */ static int nfsd4_get_drc_mem(int slotsize, u32 num) { diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index de4ea1af041b..199c606c56a5 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2108,7 +2108,7 @@ static int ocfs2_prepare_inode_for_write(struct file *file, * remove_suid() calls ->setattr without any hint that * we may have already done our cluster locking. Since * ocfs2_setattr() *must* take cluster locks to - * proceeed, this will lead us to recursively lock the + * proceed, this will lead us to recursively lock the * inode. There's also the dinode i_size state which * can be lost via setattr during extending writes (we * set inode->i_size at the end of a write. */ diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index 753ed9b5c70b..f675f3d9d7b3 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -209,10 +209,10 @@ xfs_file_fsync( /* * First check if the VFS inode is marked dirty. All the dirtying - * of non-transactional updates no goes through mark_inode_dirty*, - * which allows us to distinguish beteeen pure timestamp updates + * of non-transactional updates do not go through mark_inode_dirty*, + * which allows us to distinguish between pure timestamp updates * and i_size updates which need to be caught for fdatasync. - * After that also theck for the dirty state in the XFS inode, which + * After that also check for the dirty state in the XFS inode, which * might gets cleared when the inode gets written out via the AIL * or xfs_iflush_cluster. */ diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index c7755d5a5fbe..3ba29b114323 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -256,7 +256,7 @@ xfs_cil_prepare_item( * Insert the log items into the CIL and calculate the difference in space * consumed by the item. Add the space to the checkpoint ticket and calculate * if the change requires additional log metadata. If it does, take that space - * as well. Remove the amount of space we addded to the checkpoint ticket from + * as well. Remove the amount of space we added to the checkpoint ticket from * the current transaction ticket so that the accounting works out correctly. */ static void diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 1f9e9516e2b7..e8acca892af0 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -820,7 +820,7 @@ struct drm_driver { * Specifically, the timestamp in @vblank_time should correspond as * closely as possible to the time when the first video scanline of * the video frame after the end of VBLANK will start scanning out, - * the time immmediately after end of the VBLANK interval. If the + * the time immediately after end of the VBLANK interval. If the * @crtc is currently inside VBLANK, this will be a time in the future. * If the @crtc is currently scanning out a frame, this will be the * past start time of the current scanout. This is meant to adhere diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index e0aa39612eba..3157cc1fada6 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -309,7 +309,7 @@ typedef struct wandev_conf #define WANOPT_EVEN 2 /* CHDLC Protocol Options */ -/* DF Commmented out for now. +/* DF Commented out for now. #define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT #define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 72eddd1b410b..bd3487d5ac84 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1423,7 +1423,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * DOC: Beacon filter support * * Some hardware have beacon filter support to reduce host cpu wakeups - * which will reduce system power consumption. It usuallly works so that + * which will reduce system power consumption. It usually works so that * the firmware creates a checksum of the beacon but omits all constantly * changing elements (TSF, TIM etc). Whenever the checksum changes the * beacon is forwarded to the host, otherwise it will be just dropped. That diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index fdaabf2f2b68..1f23a57aa9e6 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -392,7 +392,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb) /* Is this the final fragment? */ if ((flags & IP_MF) == 0) { /* If we already have some bits beyond end - * or have different end, the segment is corrrupted. + * or have different end, the segment is corrupted. */ if (end < qp->q.len || ((qp->q.last_in & INET_FRAG_LAST_IN) && end != qp->q.len)) diff --git a/net/mac80211/work.c b/net/mac80211/work.c index 6c53b6d1002b..2accea37742e 100644 --- a/net/mac80211/work.c +++ b/net/mac80211/work.c @@ -1094,7 +1094,7 @@ static void ieee80211_work_work(struct work_struct *work) local->tmp_channel = NULL; /* If tmp_channel wasn't operating channel, then * we need to go back on-channel. - * NOTE: If we can ever be here while scannning, + * NOTE: If we can ever be here while scanning, * or if the hw_config() channel config logic changes, * then we may need to do a more thorough check to see if * we still need to do a hardware config. Currently, diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index c8cc24e282c3..68a385d7c3bd 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -415,7 +415,7 @@ static void sctp_endpoint_bh_rcv(struct work_struct *work) sctp_subtype_t subtype; sctp_state_t state; int error = 0; - int first_time = 1; /* is this the first time through the looop */ + int first_time = 1; /* is this the first time through the loop */ if (ep->base.dead) return; -- cgit v1.2.3