From f328584f7bff86858249bb358f1adcecde48388a Mon Sep 17 00:00:00 2001
From: Yangtao Li <tiny.windzz@gmail.com>
Date: Wed, 12 Jun 2019 12:28:15 -0400
Subject: cpufreq: Add sun50i nvmem based CPU scaling driver

For some SoCs, the CPU frequency subset and voltage value of each OPP
varies based on the silicon variant in use. The sun50i-cpufreq-nvmem
driver reads the efuse value from the SoC to provide the OPP framework
with required information.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/Kconfig.arm            |  12 ++
 drivers/cpufreq/Makefile               |   1 +
 drivers/cpufreq/cpufreq-dt-platdev.c   |   2 +
 drivers/cpufreq/sun50i-cpufreq-nvmem.c | 226 +++++++++++++++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 drivers/cpufreq/sun50i-cpufreq-nvmem.c

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 56c31a78c692..70c2b4bea55c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -19,6 +19,18 @@ config ACPI_CPPC_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
+	tristate "Allwinner nvmem based SUN50I CPUFreq driver"
+	depends on ARCH_SUNXI
+	depends on NVMEM_SUNXI_SID
+	select PM_OPP
+	help
+	  This adds the nvmem based CPUFreq driver for Allwinner
+	  h6 SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun50i-cpufreq-nvmem.
+
 config ARM_ARMADA_37XX_CPUFREQ
 	tristate "Armada 37xx CPUFreq support"
 	depends on ARCH_MVEBU && CPUFREQ_DT
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 5a6c70d26c98..7f2d2e1079d4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_ARM_SCMI_CPUFREQ)		+= scmi-cpufreq.o
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc4244ab00..f9444ddd35ab 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -101,6 +101,8 @@ static const struct of_device_id whitelist[] __initconst = {
  * platforms using "operating-points-v2" property.
  */
 static const struct of_device_id blacklist[] __initconst = {
+	{ .compatible = "allwinner,sun50i-h6", },
+
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
new file mode 100644
index 000000000000..eca32e443716
--- /dev/null
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner CPUFreq nvmem based driver
+ *
+ * The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
+ * provide the OPP framework with required information.
+ *
+ * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#define MAX_NAME_LEN	7
+
+#define NVMEM_MASK	0x7
+#define NVMEM_SHIFT	5
+
+static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
+
+/**
+ * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * @versions: Set to the value parsed from efuse
+ *
+ * Returns 0 if success.
+ */
+static int sun50i_cpufreq_get_efuse(u32 *versions)
+{
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	u32 *speedbin, efuse_value;
+	size_t len;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np,
+				      "allwinner,sun50i-h6-operating-points");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+	of_node_put(np);
+	if (IS_ERR(speedbin_nvmem)) {
+		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+			pr_err("Could not get nvmem cell: %ld\n",
+			       PTR_ERR(speedbin_nvmem));
+		return PTR_ERR(speedbin_nvmem);
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	nvmem_cell_put(speedbin_nvmem);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
+	switch (efuse_value) {
+	case 0b0001:
+		*versions = 1;
+		break;
+	case 0b0011:
+		*versions = 2;
+		break;
+	default:
+		/*
+		 * For other situations, we treat it as bin0.
+		 * This vf table can be run for any good cpu.
+		 */
+		*versions = 0;
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+};
+
+static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables;
+	char name[MAX_NAME_LEN];
+	unsigned int cpu;
+	u32 speed = 0;
+	int ret;
+
+	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables),
+			     GFP_KERNEL);
+	if (!opp_tables)
+		return -ENOMEM;
+
+	ret = sun50i_cpufreq_get_efuse(&speed);
+	if (ret)
+		return ret;
+
+	snprintf(name, MAX_NAME_LEN, "speed%d", speed);
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+
+		if (!cpu_dev) {
+			ret = -ENODEV;
+			goto free_opp;
+		}
+
+		opp_tables[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name);
+		if (IS_ERR(opp_tables[cpu])) {
+			ret = PTR_ERR(opp_tables[cpu]);
+			pr_err("Failed to set prop name\n");
+			goto free_opp;
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, opp_tables);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	pr_err("Failed to register platform device\n");
+
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+	}
+	kfree(opp_tables);
+
+	return ret;
+}
+
+static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+
+	kfree(opp_tables);
+
+	return 0;
+}
+
+static struct platform_driver sun50i_cpufreq_driver = {
+	.probe = sun50i_cpufreq_nvmem_probe,
+	.remove = sun50i_cpufreq_nvmem_remove,
+	.driver = {
+		.name = "sun50i-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id sun50i_cpufreq_match_list[] = {
+	{ .compatible = "allwinner,sun50i-h6" },
+	{}
+};
+
+static const struct of_device_id *sun50i_cpufreq_match_node(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	np = of_find_node_by_path("/");
+	match = of_match_node(sun50i_cpufreq_match_list, np);
+	of_node_put(np);
+
+	return match;
+}
+
+/*
+ * Since the driver depends on nvmem drivers, which may return EPROBE_DEFER,
+ * all the real activity is done in the probe, which may be defered as well.
+ * The init here is only registering the driver and the platform device.
+ */
+static int __init sun50i_cpufreq_init(void)
+{
+	const struct of_device_id *match;
+	int ret;
+
+	match = sun50i_cpufreq_match_node();
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&sun50i_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	sun50i_cpufreq_pdev =
+		platform_device_register_simple("sun50i-cpufreq-nvmem",
+						-1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev);
+	if (ret == 0)
+		return 0;
+
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+	return ret;
+}
+module_init(sun50i_cpufreq_init);
+
+static void __exit sun50i_cpufreq_exit(void)
+{
+	platform_device_unregister(sun50i_cpufreq_pdev);
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+}
+module_exit(sun50i_cpufreq_exit);
+
+MODULE_DESCRIPTION("Sun50i-h6 cpufreq driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 3355c91b79394593ebbb197c8e930a91826f4ff3 Mon Sep 17 00:00:00 2001
From: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Date: Sun, 21 Jul 2019 23:38:15 +0530
Subject: cpufreq: ap806: Add NULL check after kcalloc

Add NULL check  after kcalloc.

Fix below issue reported by coccicheck
./drivers/cpufreq/armada-8k-cpufreq.c:138:1-12: alloc with no test,
possible model on line 151

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/armada-8k-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c
index 988ebc326bdb..39e34f5066d3 100644
--- a/drivers/cpufreq/armada-8k-cpufreq.c
+++ b/drivers/cpufreq/armada-8k-cpufreq.c
@@ -136,6 +136,8 @@ static int __init armada_8k_cpufreq_init(void)
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);
+	if (!freq_tables)
+		return -ENOMEM;
 	cpumask_copy(&cpus, cpu_possible_mask);
 
 	/*
-- 
cgit v1.2.3


From 51dbe89768289c32406f47ad89957b79220c1b63 Mon Sep 17 00:00:00 2001
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Date: Mon, 29 Jul 2019 17:49:33 -0500
Subject: cpufreq: ti-cpufreq: Mark expected switch fall-through
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/cpufreq/ti-cpufreq.c: In function ‘dra7_efuse_xlate’:
drivers/cpufreq/ti-cpufreq.c:79:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
   calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
drivers/cpufreq/ti-cpufreq.c:80:2: note: here
  case DRA7_EFUSE_HAS_OD_MPU_OPP:
  ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/ti-cpufreq.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 2ad1ae17932d..aeaa883a8c9d 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -77,6 +77,7 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
 	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
+		/* Fall through */
 	case DRA7_EFUSE_HAS_OD_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP;
 	}
-- 
cgit v1.2.3


From 683df830e6bd12e9eb7da1fbdfccc6ac444508ae Mon Sep 17 00:00:00 2001
From: Fabien Parent <fparent@baylibre.com>
Date: Tue, 6 Aug 2019 11:50:29 +0200
Subject: cpufreq: mediatek-cpufreq: Add compatible for MT8516

Add the compatible for MT8516 in order to take advantage of the
MediaTek CPUFreq driver for Mediatek's MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/mediatek-cpufreq.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index f14f3a85f2f7..10bc06f5dd45 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -535,6 +535,7 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8516", },
 
 	{ }
 };
-- 
cgit v1.2.3


From 0eae1e37db8acef1e511cdbc63634cb700188644 Mon Sep 17 00:00:00 2001
From: Sibi Sankar <sibis@codeaurora.org>
Date: Wed, 7 Aug 2019 17:15:43 +0530
Subject: cpufreq: qcom-hw: Update logic to detect turbo frequency

The core count read back from the each domain's look up table serves
as an indicator for the onset of the turbo frequency and not accurate
representation of number of cores in a paticular domain. Update turbo
detection logic accordingly to add support for SM8150 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 4b0b50403901..c9a9da592f10 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -20,6 +20,7 @@
 #define LUT_VOLT			GENMASK(11, 0)
 #define LUT_ROW_SIZE			32
 #define CLK_HW_DIV			2
+#define LUT_TURBO_IND			1
 
 /* Register offsets */
 #define REG_ENABLE			0x0
@@ -77,9 +78,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 				    struct cpufreq_policy *policy,
 				    void __iomem *base)
 {
-	u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq;
+	u32 data, src, lval, i, core_count, prev_freq = 0, freq;
 	u32 volt;
-	unsigned int max_cores = cpumask_weight(policy->cpus);
 	struct cpufreq_frequency_table	*table;
 
 	table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
@@ -102,12 +102,12 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		else
 			freq = cpu_hw_rate / 1000;
 
-		if (freq != prev_freq && core_count == max_cores) {
+		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
 			table[i].frequency = freq;
 			dev_pm_opp_add(cpu_dev, freq * 1000, volt);
 			dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
 				freq, core_count);
-		} else {
+		} else if (core_count == LUT_TURBO_IND) {
 			table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		}
 
@@ -115,14 +115,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		 * Two of the same frequencies with the same core counts means
 		 * end of table
 		 */
-		if (i > 0 && prev_freq == freq && prev_cc == core_count) {
+		if (i > 0 && prev_freq == freq) {
 			struct cpufreq_frequency_table *prev = &table[i - 1];
 
 			/*
 			 * Only treat the last frequency that might be a boost
 			 * as the boost frequency
 			 */
-			if (prev_cc != max_cores) {
+			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
 				prev->frequency = prev_freq;
 				prev->flags = CPUFREQ_BOOST_FREQ;
 				dev_pm_opp_add(cpu_dev,	prev_freq * 1000, volt);
@@ -131,7 +131,6 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 			break;
 		}
 
-		prev_cc = core_count;
 		prev_freq = freq;
 	}
 
-- 
cgit v1.2.3


From ada54f35b2270942f45250fa1c553a426b579f9e Mon Sep 17 00:00:00 2001
From: Douglas RAILLARD <douglas.raillard@arm.com>
Date: Thu, 8 Aug 2019 14:18:57 +0100
Subject: cpufreq: qcom-hw: invoke frequency-invariance setter function

Add calls to arch_set_freq_scale() in qcom-cpufreq-hw driver to enable
frequency invariance.

Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index c9a9da592f10..a9ae2f84a4ef 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -35,9 +35,12 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
 					unsigned int index)
 {
 	void __iomem *perf_state_reg = policy->driver_data;
+	unsigned long freq = policy->freq_table[index].frequency;
 
 	writel_relaxed(index, perf_state_reg);
 
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -64,6 +67,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 {
 	void __iomem *perf_state_reg = policy->driver_data;
 	int index;
+	unsigned long freq;
 
 	index = policy->cached_resolved_idx;
 	if (index < 0)
@@ -71,7 +75,11 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 
 	writel_relaxed(index, perf_state_reg);
 
-	return policy->freq_table[index].frequency;
+	freq = policy->freq_table[index].frequency;
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
+
+	return freq;
 }
 
 static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
-- 
cgit v1.2.3


From 8ec5035039c743888c5ecd04a680676ef1537fe8 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Sun, 18 Aug 2019 02:32:21 -0400
Subject: cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading

Add i.MX8MN to blacklist, so that imx-cpufreq-dt driver can handle
speed grading bits just like other i.MX8M SoCs.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index f9444ddd35ab..6fce11f63403 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -109,6 +109,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
+	{ .compatible = "fsl,imx8mn", },
 
 	{ .compatible = "marvell,armadaxp", },
 
-- 
cgit v1.2.3


From 75c000c4bcbe2b0eb82baf90c7dd75c7380cc3fd Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Sun, 18 Aug 2019 02:32:22 -0400
Subject: cpufreq: imx-cpufreq-dt: Add i.MX8MN support

i.MX8MN has different speed grading definition as below, it has 4 bits
to define speed grading, add support for it.

 SPEED_GRADE[3:0]    MHz
    0000            2300
    0001            2200
    0010            2100
    0011            2000
    0100            1900
    0101            1800
    0110            1700
    0111            1600
    1000            1500
    1001            1400
    1010            1300
    1011            1200
    1100            1100
    1101            1000
    1110             900
    1111             800

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/imx-cpufreq-dt.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index 4f85f3112784..35db14cf3102 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -16,6 +16,7 @@
 
 #define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
 #define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
+#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
 #define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
 #define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
 
@@ -34,7 +35,12 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	if (of_machine_is_compatible("fsl,imx8mn"))
+		speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	else
+		speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
 	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
 
 	/*
-- 
cgit v1.2.3


From dce0bb84a73bac8a5bf3ad54e922215b61350481 Mon Sep 17 00:00:00 2001
From: "Andrew-sh.Cheng" <andrew-sh.cheng@mediatek.com>
Date: Tue, 13 Aug 2019 21:31:46 +0800
Subject: cpufreq: mediatek: change to regulator_get_optional

For new mediatek chip mt8183,
cci and little cluster share the same buck,
so need to modify the attribute of regulator from exclusive to optional

Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/mediatek-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 10bc06f5dd45..42bc4c9044f6 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -338,7 +338,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 		goto out_free_resources;
 	}
 
-	proc_reg = regulator_get_exclusive(cpu_dev, "proc");
+	proc_reg = regulator_get_optional(cpu_dev, "proc");
 	if (IS_ERR(proc_reg)) {
 		if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
 			pr_warn("proc regulator for cpu%d not ready, retry.\n",
-- 
cgit v1.2.3


From 9176b425bf8ff98fd12bffeea8e39373345cd745 Mon Sep 17 00:00:00 2001
From: "Andrew-sh.Cheng" <andrew-sh.cheng@mediatek.com>
Date: Tue, 13 Aug 2019 21:31:48 +0800
Subject: cpufreq: mediatek: Add support for mt8183

Add compatible string for mediatek mt8183

Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
[ VK: Fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 drivers/cpufreq/mediatek-cpufreq.c   | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 6fce11f63403..d51bfef286e3 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -120,6 +120,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
 
 	{ .compatible = "nvidia,tegra124", },
 	{ .compatible = "nvidia,tegra210", },
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 42bc4c9044f6..0c98dd08273d 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -535,6 +535,7 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
 	{ .compatible = "mediatek,mt8516", },
 
 	{ }
-- 
cgit v1.2.3


From 7d12709544b8b3fb9727a34a664b8380e1e3493a Mon Sep 17 00:00:00 2001
From: Sricharan R <sricharan@codeaurora.org>
Date: Thu, 25 Jul 2019 12:41:31 +0200
Subject: cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem
 based qcom socs

The kryo cpufreq driver reads the nvmem cell and uses that data to
populate the opps. There are other qcom cpufreq socs like krait which
does similar thing. Except for the interpretation of the read data,
rest of the driver is same for both the cases. So pull the common things
out for reuse.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[niklas.cassel@linaro.org: split dt-binding into a separate patch and
do not rename the compatible string. Update MAINTAINERS file.]
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 MAINTAINERS                          |   4 +-
 drivers/cpufreq/Kconfig.arm          |   4 +-
 drivers/cpufreq/Makefile             |   2 +-
 drivers/cpufreq/qcom-cpufreq-kryo.c  | 249 --------------------------------
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 273 +++++++++++++++++++++++++++++++++++
 5 files changed, 278 insertions(+), 254 deletions(-)
 delete mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
 create mode 100644 drivers/cpufreq/qcom-cpufreq-nvmem.c

(limited to 'drivers/cpufreq')

diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..cc73f908d5f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13285,8 +13285,8 @@ QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
-F:	drivers/cpufreq/qcom-cpufreq-kryo.c
+F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
 
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
 M:	Timur Tabi <timur@kernel.org>
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 56c31a78c692..b1aa485a28dd 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -120,8 +120,8 @@ config ARM_OMAP2PLUS_CPUFREQ
 	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
 
-config ARM_QCOM_CPUFREQ_KRYO
-	tristate "Qualcomm Kryo based CPUFreq"
+config ARM_QCOM_CPUFREQ_NVMEM
+	tristate "Qualcomm nvmem based CPUFreq"
 	depends on ARM64
 	depends on QCOM_QFPROM
 	depends on QCOM_SMEM
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 5a6c70d26c98..8572a918aa75 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -64,7 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
-obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM)	+= qcom-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c
deleted file mode 100644
index dd64dcf89c74..000000000000
--- a/drivers/cpufreq/qcom-cpufreq-kryo.c
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-/*
- * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
- * the CPU frequency subset and voltage value of each OPP varies
- * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
- * defines the voltage and frequency value based on the msm-id in SMEM
- * and speedbin blown in the efuse combination.
- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
- * to provide the OPP framework with required information.
- * This is used to determine the voltage and frequency value for each OPP of
- * operating-points-v2 table when it is parsed by the OPP framework.
- */
-
-#include <linux/cpu.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/soc/qcom/smem.h>
-
-#define MSM_ID_SMEM	137
-
-enum _msm_id {
-	MSM8996V3 = 0xF6ul,
-	APQ8096V3 = 0x123ul,
-	MSM8996SG = 0x131ul,
-	APQ8096SG = 0x138ul,
-};
-
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
-static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
-
-static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case MSM8996V3:
-	case APQ8096V3:
-		version = MSM8996_V3;
-		break;
-	case MSM8996SG:
-	case APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables;
-	enum _msm8996_version msm8996_version;
-	struct nvmem_cell *speedbin_nvmem;
-	struct device_node *np;
-	struct device *cpu_dev;
-	unsigned cpu;
-	u8 *speedbin;
-	u32 versions;
-	size_t len;
-	int ret;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev)
-		return -ENODEV;
-
-	msm8996_version = qcom_cpufreq_kryo_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
-
-	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!np)
-		return -ENOENT;
-
-	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
-	if (!ret) {
-		of_node_put(np);
-		return -ENOENT;
-	}
-
-	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-	of_node_put(np);
-	if (IS_ERR(speedbin_nvmem)) {
-		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
-			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
-				PTR_ERR(speedbin_nvmem));
-		return PTR_ERR(speedbin_nvmem);
-	}
-
-	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
-	nvmem_cell_put(speedbin_nvmem);
-	if (IS_ERR(speedbin))
-		return PTR_ERR(speedbin);
-
-	switch (msm8996_version) {
-	case MSM8996_V3:
-		versions = 1 << (unsigned int)(*speedbin);
-		break;
-	case MSM8996_SG:
-		versions = 1 << ((unsigned int)(*speedbin) + 4);
-		break;
-	default:
-		BUG();
-		break;
-	}
-	kfree(speedbin);
-
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
-	if (!opp_tables)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		cpu_dev = get_cpu_device(cpu);
-		if (NULL == cpu_dev) {
-			ret = -ENODEV;
-			goto free_opp;
-		}
-
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
-			dev_err(cpu_dev, "Failed to set supported hardware\n");
-			goto free_opp;
-		}
-	}
-
-	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
-							  NULL, 0);
-	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
-		return 0;
-	}
-
-	ret = PTR_ERR(cpufreq_dt_pdev);
-	dev_err(cpu_dev, "Failed to register platform device\n");
-
-free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-	}
-	kfree(opp_tables);
-
-	return ret;
-}
-
-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
-	unsigned int cpu;
-
-	platform_device_unregister(cpufreq_dt_pdev);
-
-	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-
-	kfree(opp_tables);
-
-	return 0;
-}
-
-static struct platform_driver qcom_cpufreq_kryo_driver = {
-	.probe = qcom_cpufreq_kryo_probe,
-	.remove = qcom_cpufreq_kryo_remove,
-	.driver = {
-		.name = "qcom-cpufreq-kryo",
-	},
-};
-
-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096", },
-	{ .compatible = "qcom,msm8996", },
-	{}
-};
-
-/*
- * Since the driver depends on smem and nvmem drivers, which may
- * return EPROBE_DEFER, all the real activity is done in the probe,
- * which may be defered as well. The init here is only registering
- * the driver and the platform device.
- */
-static int __init qcom_cpufreq_kryo_init(void)
-{
-	struct device_node *np = of_find_node_by_path("/");
-	const struct of_device_id *match;
-	int ret;
-
-	if (!np)
-		return -ENODEV;
-
-	match = of_match_node(qcom_cpufreq_kryo_match_list, np);
-	of_node_put(np);
-	if (!match)
-		return -ENODEV;
-
-	ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
-	if (unlikely(ret < 0))
-		return ret;
-
-	kryo_cpufreq_pdev = platform_device_register_simple(
-		"qcom-cpufreq-kryo", -1, NULL, 0);
-	ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
-	if (0 == ret)
-		return 0;
-
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-	return ret;
-}
-module_init(qcom_cpufreq_kryo_init);
-
-static void __exit qcom_cpufreq_kryo_exit(void)
-{
-	platform_device_unregister(kryo_cpufreq_pdev);
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-}
-module_exit(qcom_cpufreq_kryo_exit);
-
-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
new file mode 100644
index 000000000000..fd08120768af
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
+ * the CPU frequency subset and voltage value of each OPP varies
+ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
+ * defines the voltage and frequency value based on the msm-id in SMEM
+ * and speedbin blown in the efuse combination.
+ * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
+ * to provide the OPP framework with required information.
+ * This is used to determine the voltage and frequency value for each OPP of
+ * operating-points-v2 table when it is parsed by the OPP framework.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define MSM_ID_SMEM	137
+
+enum _msm_id {
+	MSM8996V3 = 0xF6ul,
+	APQ8096V3 = 0x123ul,
+	MSM8996SG = 0x131ul,
+	APQ8096SG = 0x138ul,
+};
+
+enum _msm8996_version {
+	MSM8996_V3,
+	MSM8996_SG,
+	NUM_OF_MSM8996_VERSIONS,
+};
+
+static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+
+static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
+{
+	size_t len;
+	u32 *msm_id;
+	enum _msm8996_version version;
+
+	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
+	if (IS_ERR(msm_id))
+		return NUM_OF_MSM8996_VERSIONS;
+
+	/* The first 4 bytes are format, next to them is the actual msm-id */
+	msm_id++;
+
+	switch ((enum _msm_id)*msm_id) {
+	case MSM8996V3:
+	case APQ8096V3:
+		version = MSM8996_V3;
+		break;
+	case MSM8996SG:
+	case APQ8096SG:
+		version = MSM8996_SG;
+		break;
+	default:
+		version = NUM_OF_MSM8996_VERSIONS;
+	}
+
+	return version;
+}
+
+static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
+					  struct nvmem_cell *speedbin_nvmem,
+					  u32 *versions)
+{
+	size_t len;
+	u8 *speedbin;
+	enum _msm8996_version msm8996_version;
+
+	msm8996_version = qcom_cpufreq_get_msm_id();
+	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+		dev_err(cpu_dev, "Not Snapdragon 820/821!");
+		return -ENODEV;
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	switch (msm8996_version) {
+	case MSM8996_V3:
+		*versions = 1 << (unsigned int)(*speedbin);
+		break;
+	case MSM8996_SG:
+		*versions = 1 << ((unsigned int)(*speedbin) + 4);
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+}
+
+static int qcom_cpufreq_probe(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables;
+	int (*get_version)(struct device *cpu_dev,
+			   struct nvmem_cell *speedbin_nvmem,
+			   u32 *versions);
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	unsigned cpu;
+	u32 versions;
+	const struct of_device_id *match;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	match = pdev->dev.platform_data;
+	get_version = match->data;
+	if (!get_version)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+	of_node_put(np);
+	if (IS_ERR(speedbin_nvmem)) {
+		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
+				PTR_ERR(speedbin_nvmem));
+		return PTR_ERR(speedbin_nvmem);
+	}
+
+	ret = get_version(cpu_dev, speedbin_nvmem, &versions);
+	nvmem_cell_put(speedbin_nvmem);
+	if (ret)
+		return ret;
+
+	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
+	if (!opp_tables)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (NULL == cpu_dev) {
+			ret = -ENODEV;
+			goto free_opp;
+		}
+
+		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
+							      &versions, 1);
+		if (IS_ERR(opp_tables[cpu])) {
+			ret = PTR_ERR(opp_tables[cpu]);
+			dev_err(cpu_dev, "Failed to set supported hardware\n");
+			goto free_opp;
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, opp_tables);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	dev_err(cpu_dev, "Failed to register platform device\n");
+
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+	}
+	kfree(opp_tables);
+
+	return ret;
+}
+
+static int qcom_cpufreq_remove(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+
+	kfree(opp_tables);
+
+	return 0;
+}
+
+static struct platform_driver qcom_cpufreq_driver = {
+	.probe = qcom_cpufreq_probe,
+	.remove = qcom_cpufreq_remove,
+	.driver = {
+		.name = "qcom-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
+	{ .compatible = "qcom,apq8096",
+	  .data = qcom_cpufreq_kryo_name_version },
+	{ .compatible = "qcom,msm8996",
+	  .data = qcom_cpufreq_kryo_name_version },
+	{},
+};
+
+/*
+ * Since the driver depends on smem and nvmem drivers, which may
+ * return EPROBE_DEFER, all the real activity is done in the probe,
+ * which may be defered as well. The init here is only registering
+ * the driver and the platform device.
+ */
+static int __init qcom_cpufreq_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(qcom_cpufreq_match_list, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&qcom_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem",
+						     -1, match, sizeof(*match));
+	ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
+	if (0 == ret)
+		return 0;
+
+	platform_driver_unregister(&qcom_cpufreq_driver);
+	return ret;
+}
+module_init(qcom_cpufreq_init);
+
+static void __exit qcom_cpufreq_exit(void)
+{
+	platform_device_unregister(cpufreq_pdev);
+	platform_driver_unregister(&qcom_cpufreq_driver);
+}
+module_exit(qcom_cpufreq_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 57f2f8b4aa0c6b41a284da82bfa40dc3b2abe9a5 Mon Sep 17 00:00:00 2001
From: Niklas Cassel <niklas.cassel@linaro.org>
Date: Thu, 25 Jul 2019 12:41:33 +0200
Subject: cpufreq: qcom: Refactor the driver to make it easier to extend

Refactor the driver to make it easier to extend in a later commit.

Create a driver struct to collect all common resources, in order to make
it easier to free up all common resources.
Create a driver match_data struct to make it easier to extend the driver
with support for new features that might only be supported on certain SoCs.

Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 123 ++++++++++++++++++++++-------------
 1 file changed, 79 insertions(+), 44 deletions(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index fd08120768af..2d798a1685c5 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -43,6 +43,20 @@ enum _msm8996_version {
 	NUM_OF_MSM8996_VERSIONS,
 };
 
+struct qcom_cpufreq_drv;
+
+struct qcom_cpufreq_match_data {
+	int (*get_version)(struct device *cpu_dev,
+			   struct nvmem_cell *speedbin_nvmem,
+			   struct qcom_cpufreq_drv *drv);
+};
+
+struct qcom_cpufreq_drv {
+	struct opp_table **opp_tables;
+	u32 versions;
+	const struct qcom_cpufreq_match_data *data;
+};
+
 static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
 
 static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
@@ -76,7 +90,7 @@ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
 
 static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 					  struct nvmem_cell *speedbin_nvmem,
-					  u32 *versions)
+					  struct qcom_cpufreq_drv *drv)
 {
 	size_t len;
 	u8 *speedbin;
@@ -94,10 +108,10 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 
 	switch (msm8996_version) {
 	case MSM8996_V3:
-		*versions = 1 << (unsigned int)(*speedbin);
+		drv->versions = 1 << (unsigned int)(*speedbin);
 		break;
 	case MSM8996_SG:
-		*versions = 1 << ((unsigned int)(*speedbin) + 4);
+		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
 		break;
 	default:
 		BUG();
@@ -108,17 +122,17 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 	return 0;
 }
 
+static const struct qcom_cpufreq_match_data match_data_kryo = {
+	.get_version = qcom_cpufreq_kryo_name_version,
+};
+
 static int qcom_cpufreq_probe(struct platform_device *pdev)
 {
-	struct opp_table **opp_tables;
-	int (*get_version)(struct device *cpu_dev,
-			   struct nvmem_cell *speedbin_nvmem,
-			   u32 *versions);
+	struct qcom_cpufreq_drv *drv;
 	struct nvmem_cell *speedbin_nvmem;
 	struct device_node *np;
 	struct device *cpu_dev;
 	unsigned cpu;
-	u32 versions;
 	const struct of_device_id *match;
 	int ret;
 
@@ -126,11 +140,6 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	if (!cpu_dev)
 		return -ENODEV;
 
-	match = pdev->dev.platform_data;
-	get_version = match->data;
-	if (!get_version)
-		return -ENODEV;
-
 	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
 	if (!np)
 		return -ENOENT;
@@ -141,23 +150,43 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-	of_node_put(np);
-	if (IS_ERR(speedbin_nvmem)) {
-		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
-			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
-				PTR_ERR(speedbin_nvmem));
-		return PTR_ERR(speedbin_nvmem);
+	drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	match = pdev->dev.platform_data;
+	drv->data = match->data;
+	if (!drv->data) {
+		ret = -ENODEV;
+		goto free_drv;
 	}
 
-	ret = get_version(cpu_dev, speedbin_nvmem, &versions);
-	nvmem_cell_put(speedbin_nvmem);
-	if (ret)
-		return ret;
+	if (drv->data->get_version) {
+		speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+		if (IS_ERR(speedbin_nvmem)) {
+			if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+				dev_err(cpu_dev,
+					"Could not get nvmem cell: %ld\n",
+					PTR_ERR(speedbin_nvmem));
+			ret = PTR_ERR(speedbin_nvmem);
+			goto free_drv;
+		}
 
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
-	if (!opp_tables)
-		return -ENOMEM;
+		ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+		if (ret) {
+			nvmem_cell_put(speedbin_nvmem);
+			goto free_drv;
+		}
+		nvmem_cell_put(speedbin_nvmem);
+	}
+	of_node_put(np);
+
+	drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+				  GFP_KERNEL);
+	if (!drv->opp_tables) {
+		ret = -ENOMEM;
+		goto free_drv;
+	}
 
 	for_each_possible_cpu(cpu) {
 		cpu_dev = get_cpu_device(cpu);
@@ -166,19 +195,23 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 			goto free_opp;
 		}
 
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
-			dev_err(cpu_dev, "Failed to set supported hardware\n");
-			goto free_opp;
+		if (drv->data->get_version) {
+			drv->opp_tables[cpu] =
+				dev_pm_opp_set_supported_hw(cpu_dev,
+							    &drv->versions, 1);
+			if (IS_ERR(drv->opp_tables[cpu])) {
+				ret = PTR_ERR(drv->opp_tables[cpu]);
+				dev_err(cpu_dev,
+					"Failed to set supported hardware\n");
+				goto free_opp;
+			}
 		}
 	}
 
 	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
 							  NULL, 0);
 	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
+		platform_set_drvdata(pdev, drv);
 		return 0;
 	}
 
@@ -187,26 +220,30 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 
 free_opp:
 	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+		if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
 			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+		dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
 	}
-	kfree(opp_tables);
+	kfree(drv->opp_tables);
+free_drv:
+	kfree(drv);
 
 	return ret;
 }
 
 static int qcom_cpufreq_remove(struct platform_device *pdev)
 {
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev);
 	unsigned int cpu;
 
 	platform_device_unregister(cpufreq_dt_pdev);
 
 	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+		if (drv->opp_tables[cpu])
+			dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
 
-	kfree(opp_tables);
+	kfree(drv->opp_tables);
+	kfree(drv);
 
 	return 0;
 }
@@ -220,10 +257,8 @@ static struct platform_driver qcom_cpufreq_driver = {
 };
 
 static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096",
-	  .data = qcom_cpufreq_kryo_name_version },
-	{ .compatible = "qcom,msm8996",
-	  .data = qcom_cpufreq_kryo_name_version },
+	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
+	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
 	{},
 };
 
-- 
cgit v1.2.3


From 1cb8339ca225601610b11c7a47e69faa48943077 Mon Sep 17 00:00:00 2001
From: Niklas Cassel <niklas.cassel@linaro.org>
Date: Thu, 25 Jul 2019 12:41:35 +0200
Subject: cpufreq: qcom: Add support for qcs404 on nvmem driver

Add support for qcs404 on nvmem driver.

The qcs404 SoC has support for Core Power Reduction (CPR), which is
implemented as a power domain provider, therefore add optional support
in this driver to attach to a genpd power domain.

Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 50 +++++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 3 deletions(-)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 2d798a1685c5..f0d2d5035413 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
@@ -49,10 +50,12 @@ struct qcom_cpufreq_match_data {
 	int (*get_version)(struct device *cpu_dev,
 			   struct nvmem_cell *speedbin_nvmem,
 			   struct qcom_cpufreq_drv *drv);
+	const char **genpd_names;
 };
 
 struct qcom_cpufreq_drv {
 	struct opp_table **opp_tables;
+	struct opp_table **genpd_opp_tables;
 	u32 versions;
 	const struct qcom_cpufreq_match_data *data;
 };
@@ -126,6 +129,12 @@ static const struct qcom_cpufreq_match_data match_data_kryo = {
 	.get_version = qcom_cpufreq_kryo_name_version,
 };
 
+static const char *qcs404_genpd_names[] = { "cpr", NULL };
+
+static const struct qcom_cpufreq_match_data match_data_qcs404 = {
+	.genpd_names = qcs404_genpd_names,
+};
+
 static int qcom_cpufreq_probe(struct platform_device *pdev)
 {
 	struct qcom_cpufreq_drv *drv;
@@ -188,11 +197,19 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 		goto free_drv;
 	}
 
+	drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
+					sizeof(*drv->genpd_opp_tables),
+					GFP_KERNEL);
+	if (!drv->genpd_opp_tables) {
+		ret = -ENOMEM;
+		goto free_opp;
+	}
+
 	for_each_possible_cpu(cpu) {
 		cpu_dev = get_cpu_device(cpu);
 		if (NULL == cpu_dev) {
 			ret = -ENODEV;
-			goto free_opp;
+			goto free_genpd_opp;
 		}
 
 		if (drv->data->get_version) {
@@ -203,7 +220,22 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 				ret = PTR_ERR(drv->opp_tables[cpu]);
 				dev_err(cpu_dev,
 					"Failed to set supported hardware\n");
-				goto free_opp;
+				goto free_genpd_opp;
+			}
+		}
+
+		if (drv->data->genpd_names) {
+			drv->genpd_opp_tables[cpu] =
+				dev_pm_opp_attach_genpd(cpu_dev,
+							drv->data->genpd_names,
+							NULL);
+			if (IS_ERR(drv->genpd_opp_tables[cpu])) {
+				ret = PTR_ERR(drv->genpd_opp_tables[cpu]);
+				if (ret != -EPROBE_DEFER)
+					dev_err(cpu_dev,
+						"Could not attach to pm_domain: %d\n",
+						ret);
+				goto free_genpd_opp;
 			}
 		}
 	}
@@ -218,6 +250,13 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	ret = PTR_ERR(cpufreq_dt_pdev);
 	dev_err(cpu_dev, "Failed to register platform device\n");
 
+free_genpd_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->genpd_opp_tables[cpu]))
+			break;
+		dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
+	kfree(drv->genpd_opp_tables);
 free_opp:
 	for_each_possible_cpu(cpu) {
 		if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
@@ -238,11 +277,15 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
 
 	platform_device_unregister(cpufreq_dt_pdev);
 
-	for_each_possible_cpu(cpu)
+	for_each_possible_cpu(cpu) {
 		if (drv->opp_tables[cpu])
 			dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+		if (drv->genpd_opp_tables[cpu])
+			dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
 
 	kfree(drv->opp_tables);
+	kfree(drv->genpd_opp_tables);
 	kfree(drv);
 
 	return 0;
@@ -259,6 +302,7 @@ static struct platform_driver qcom_cpufreq_driver = {
 static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
 	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
 	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
+	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
 	{},
 };
 
-- 
cgit v1.2.3


From 248b5f297cf809b6a61e38db22049011f619518b Mon Sep 17 00:00:00 2001
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Date: Thu, 25 Jul 2019 12:41:36 +0200
Subject: cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist

Add qcs404 to cpufreq-dt-platdev blacklist.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/cpufreq')

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc4244ab00..ec6ef996e637 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -123,6 +123,7 @@ static const struct of_device_id blacklist[] __initconst = {
 
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
+	{ .compatible = "qcom,qcs404", },
 
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },
-- 
cgit v1.2.3