From 0c6ab1b8f8940d4ddbfff7ddff080cbfb5f32b02 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Tue, 5 Dec 2017 17:46:58 +0200 Subject: clk: qcom: Add A53 PLL support The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs, a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources are connected to a mux and half-integer divider, which is feeding the CPU cores. This patch adds support for the primary CPU PLL which generates the higher range of frequencies above 1GHz. Signed-off-by: Georgi Djakov Acked-by: Bjorn Andersson Tested-by: Amit Kucheria [sboyd@codeaurora.org: Move to devm provider registration, NUL terminate frequency table, made tristate/modular] Signed-off-by: Stephen Boyd --- drivers/clk/qcom/Kconfig | 10 +++++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/a53-pll.c | 107 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 118 insertions(+) create mode 100644 drivers/clk/qcom/a53-pll.c (limited to 'drivers/clk/qcom') diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 9f6c278deead..49db9fda6548 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -12,6 +12,16 @@ config COMMON_CLK_QCOM select REGMAP_MMIO select RESET_CONTROLLER +config QCOM_A53PLL + tristate "MSM8916 A53 PLL" + depends on COMMON_CLK_QCOM + default ARCH_QCOM + help + Support for the A53 PLL on MSM8916 devices. It provides + the CPU with frequencies above 1GHz. + Say Y if you want to support higher CPU frequencies on MSM8916 + devices. + config QCOM_CLK_RPM tristate "RPM based Clock Controller" depends on COMMON_CLK_QCOM && MFD_QCOM_RPM diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 26410d31446b..e767c60c24ec 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -32,5 +32,6 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o +obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c new file mode 100644 index 000000000000..45cfc57bff92 --- /dev/null +++ b/drivers/clk/qcom/a53-pll.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Qualcomm A53 PLL driver + * + * Copyright (c) 2017, Linaro Limited + * Author: Georgi Djakov + */ + +#include +#include +#include +#include +#include + +#include "clk-pll.h" +#include "clk-regmap.h" + +static const struct pll_freq_tbl a53pll_freq[] = { + { 998400000, 52, 0x0, 0x1, 0 }, + { 1094400000, 57, 0x0, 0x1, 0 }, + { 1152000000, 62, 0x0, 0x1, 0 }, + { 1209600000, 63, 0x0, 0x1, 0 }, + { 1248000000, 65, 0x0, 0x1, 0 }, + { 1363200000, 71, 0x0, 0x1, 0 }, + { 1401600000, 73, 0x0, 0x1, 0 }, + { } +}; + +static const struct regmap_config a53pll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x40, + .fast_io = true, +}; + +static int qcom_a53pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + struct resource *res; + struct clk_pll *pll; + void __iomem *base; + struct clk_init_data init = { }; + int ret; + + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); + if (!pll) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + pll->l_reg = 0x04; + pll->m_reg = 0x08; + pll->n_reg = 0x0c; + pll->config_reg = 0x14; + pll->mode_reg = 0x00; + pll->status_reg = 0x1c; + pll->status_bit = 16; + pll->freq_tbl = a53pll_freq; + + init.name = "a53pll"; + init.parent_names = (const char *[]){ "xo" }; + init.num_parents = 1; + init.ops = &clk_pll_sr2_ops; + init.flags = CLK_IS_CRITICAL; + pll->clkr.hw.init = &init; + + ret = devm_clk_register_regmap(dev, &pll->clkr); + if (ret) { + dev_err(dev, "failed to register regmap clock: %d\n", ret); + return ret; + } + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &pll->clkr.hw); + if (ret) { + dev_err(dev, "failed to add clock provider: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id qcom_a53pll_match_table[] = { + { .compatible = "qcom,msm8916-a53pll" }, + { } +}; + +static struct platform_driver qcom_a53pll_driver = { + .probe = qcom_a53pll_probe, + .driver = { + .name = "qcom-a53pll", + .of_match_table = qcom_a53pll_match_table, + }, +}; +module_platform_driver(qcom_a53pll_driver); + +MODULE_DESCRIPTION("Qualcomm A53 PLL Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3