From 9cd10205227cbe9bbd48fd6bf78dad88b45526b0 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Fri, 3 Jan 2020 00:11:01 +0100 Subject: clk: fsl-sai: new driver With this driver it is possible to use the BCLK pin of the SAI module as a generic clock output. This is esp. useful if you want to drive a clock to an audio codec. Because the output only allows integer divider values the audio codec needs an integrated PLL. Signed-off-by: Michael Walle Link: https://lkml.kernel.org/r/20200102231101.11834-3-michael@walle.cc Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 45653a0e6ecd..dd1a5abc4ce8 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -174,6 +174,18 @@ config COMMON_CLK_CS2000_CP help If you say yes here you get support for the CS2000 clock multiplier. +config COMMON_CLK_FSL_SAI + bool "Clock driver for BCLK of Freescale SAI cores" + depends on ARCH_LAYERSCAPE || COMPILE_TEST + help + This driver supports the Freescale SAI (Synchronous Audio Interface) + to be used as a generic clock output. Some SoCs have restrictions + regarding the possible pin multiplexer settings. Eg. on some SoCs + two SAI interfaces can only be enabled together. If just one is + needed, the BCLK pin of the second one can be used as general + purpose clock output. Ideally, it can be used to drive an audio + codec (sometimes known as MCLK). + config COMMON_CLK_GEMINI bool "Clock driver for Cortina Systems Gemini SoC" depends on ARCH_GEMINI || COMPILE_TEST -- cgit v1.2.3 From d37010a3c162f23e47a11a8f5946dbd974999c42 Mon Sep 17 00:00:00 2001 From: Wen He Date: Fri, 13 Dec 2019 16:34:02 +0800 Subject: clk: ls1028a: Add clock driver for Display output interface Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY), as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable integer division and range of the display output pixel clock's 27-594MHz. Signed-off-by: Wen He Signed-off-by: Michael Walle Link: https://lkml.kernel.org/r/20191213083402.35678-2-wen.he_1@nxp.com Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 10 ++ drivers/clk/Makefile | 1 + drivers/clk/clk-plldig.c | 286 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 297 insertions(+) create mode 100644 drivers/clk/clk-plldig.c (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 45653a0e6ecd..32943544b446 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -225,6 +225,16 @@ config CLK_QORIQ This adds the clock driver support for Freescale QorIQ platforms using common clock framework. +config CLK_LS1028A_PLLDIG + tristate "Clock driver for LS1028A Display output" + depends on ARCH_LAYERSCAPE || COMPILE_TEST + default ARCH_LAYERSCAPE + help + This driver support the Display output interfaces(LCD, DPHY) pixel clocks + of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all + features of the PLL are currently supported by the driver. By default, + configured bypass mode with this PLL. + config COMMON_CLK_XGENE bool "Clock driver for APM XGene SoC" default ARCH_XGENE diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 0696a0c1ab58..cae17ebc018d 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o +obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o diff --git a/drivers/clk/clk-plldig.c b/drivers/clk/clk-plldig.c new file mode 100644 index 000000000000..a5da08f98d01 --- /dev/null +++ b/drivers/clk/clk-plldig.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 NXP + * + * Clock driver for LS1028A Display output interfaces(LCD, DPHY). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* PLLDIG register offsets and bit masks */ +#define PLLDIG_REG_PLLSR 0x24 +#define PLLDIG_LOCK_MASK BIT(2) +#define PLLDIG_REG_PLLDV 0x28 +#define PLLDIG_MFD_MASK GENMASK(7, 0) +#define PLLDIG_RFDPHI1_MASK GENMASK(30, 25) +#define PLLDIG_REG_PLLFM 0x2c +#define PLLDIG_SSCGBYP_ENABLE BIT(30) +#define PLLDIG_REG_PLLFD 0x30 +#define PLLDIG_FDEN BIT(30) +#define PLLDIG_FRAC_MASK GENMASK(15, 0) +#define PLLDIG_REG_PLLCAL1 0x38 +#define PLLDIG_REG_PLLCAL2 0x3c + +/* Range of the VCO frequencies, in Hz */ +#define PLLDIG_MIN_VCO_FREQ 650000000 +#define PLLDIG_MAX_VCO_FREQ 1300000000 + +/* Range of the output frequencies, in Hz */ +#define PHI1_MIN_FREQ 27000000 +#define PHI1_MAX_FREQ 600000000 + +/* Maximum value of the reduced frequency divider */ +#define MAX_RFDPHI1 63UL + +/* Best value of multiplication factor divider */ +#define PLLDIG_DEFAULT_MFD 44 + +/* + * Denominator part of the fractional part of the + * loop multiplication factor. + */ +#define MFDEN 20480 + +static const struct clk_parent_data parent_data[] = { + { .index = 0 }, +}; + +struct clk_plldig { + struct clk_hw hw; + void __iomem *regs; + unsigned int vco_freq; +}; + +#define to_clk_plldig(_hw) container_of(_hw, struct clk_plldig, hw) + +static int plldig_enable(struct clk_hw *hw) +{ + struct clk_plldig *data = to_clk_plldig(hw); + u32 val; + + val = readl(data->regs + PLLDIG_REG_PLLFM); + /* + * Use Bypass mode with PLL off by default, the frequency overshoot + * detector output was disable. SSCG Bypass mode should be enable. + */ + val |= PLLDIG_SSCGBYP_ENABLE; + writel(val, data->regs + PLLDIG_REG_PLLFM); + + return 0; +} + +static void plldig_disable(struct clk_hw *hw) +{ + struct clk_plldig *data = to_clk_plldig(hw); + u32 val; + + val = readl(data->regs + PLLDIG_REG_PLLFM); + + val &= ~PLLDIG_SSCGBYP_ENABLE; + val |= FIELD_PREP(PLLDIG_SSCGBYP_ENABLE, 0x0); + + writel(val, data->regs + PLLDIG_REG_PLLFM); +} + +static int plldig_is_enabled(struct clk_hw *hw) +{ + struct clk_plldig *data = to_clk_plldig(hw); + + return readl(data->regs + PLLDIG_REG_PLLFM) & + PLLDIG_SSCGBYP_ENABLE; +} + +static unsigned long plldig_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_plldig *data = to_clk_plldig(hw); + u32 val, rfdphi1; + + val = readl(data->regs + PLLDIG_REG_PLLDV); + + /* Check if PLL is bypassed */ + if (val & PLLDIG_SSCGBYP_ENABLE) + return parent_rate; + + rfdphi1 = FIELD_GET(PLLDIG_RFDPHI1_MASK, val); + + /* + * If RFDPHI1 has a value of 1 the VCO frequency is also divided by + * one. + */ + if (!rfdphi1) + rfdphi1 = 1; + + return DIV_ROUND_UP(data->vco_freq, rfdphi1); +} + +static unsigned long plldig_calc_target_div(unsigned long vco_freq, + unsigned long target_rate) +{ + unsigned long div; + + div = DIV_ROUND_CLOSEST(vco_freq, target_rate); + div = clamp(div, 1UL, MAX_RFDPHI1); + + return div; +} + +static int plldig_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_plldig *data = to_clk_plldig(hw); + unsigned int div; + + req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ); + div = plldig_calc_target_div(data->vco_freq, req->rate); + req->rate = DIV_ROUND_UP(data->vco_freq, div); + + return 0; +} + +static int plldig_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_plldig *data = to_clk_plldig(hw); + unsigned int val, cond; + unsigned int rfdphi1; + + rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ); + rfdphi1 = plldig_calc_target_div(data->vco_freq, rate); + + /* update the divider value */ + val = readl(data->regs + PLLDIG_REG_PLLDV); + val &= ~PLLDIG_RFDPHI1_MASK; + val |= FIELD_PREP(PLLDIG_RFDPHI1_MASK, rfdphi1); + writel(val, data->regs + PLLDIG_REG_PLLDV); + + /* waiting for old lock state to clear */ + udelay(200); + + /* Wait until PLL is locked or timeout */ + return readl_poll_timeout_atomic(data->regs + PLLDIG_REG_PLLSR, cond, + cond & PLLDIG_LOCK_MASK, 0, + USEC_PER_MSEC); +} + +static const struct clk_ops plldig_clk_ops = { + .enable = plldig_enable, + .disable = plldig_disable, + .is_enabled = plldig_is_enabled, + .recalc_rate = plldig_recalc_rate, + .determine_rate = plldig_determine_rate, + .set_rate = plldig_set_rate, +}; + +static int plldig_init(struct clk_hw *hw) +{ + struct clk_plldig *data = to_clk_plldig(hw); + struct clk_hw *parent = clk_hw_get_parent(hw); + unsigned long parent_rate = clk_hw_get_rate(parent); + unsigned long val; + unsigned long long lltmp; + unsigned int mfd, fracdiv = 0; + + if (!parent) + return -EINVAL; + + if (data->vco_freq) { + mfd = data->vco_freq / parent_rate; + lltmp = data->vco_freq % parent_rate; + lltmp *= MFDEN; + do_div(lltmp, parent_rate); + fracdiv = lltmp; + } else { + mfd = PLLDIG_DEFAULT_MFD; + data->vco_freq = parent_rate * mfd; + } + + val = FIELD_PREP(PLLDIG_MFD_MASK, mfd); + writel(val, data->regs + PLLDIG_REG_PLLDV); + + /* Enable fractional divider */ + if (fracdiv) { + val = FIELD_PREP(PLLDIG_FRAC_MASK, fracdiv); + val |= PLLDIG_FDEN; + writel(val, data->regs + PLLDIG_REG_PLLFD); + } + + return 0; +} + +static int plldig_clk_probe(struct platform_device *pdev) +{ + struct clk_plldig *data; + struct device *dev = &pdev->dev; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->regs)) + return PTR_ERR(data->regs); + + data->hw.init = CLK_HW_INIT_PARENTS_DATA("dpclk", + parent_data, + &plldig_clk_ops, + 0); + + ret = devm_clk_hw_register(dev, &data->hw); + if (ret) { + dev_err(dev, "failed to register %s clock\n", + dev->of_node->name); + return ret; + } + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &data->hw); + if (ret) { + dev_err(dev, "unable to add clk provider\n"); + return ret; + } + + /* + * The frequency of the VCO cannot be changed during runtime. + * Therefore, let the user specify a desired frequency. + */ + if (!of_property_read_u32(dev->of_node, "fsl,vco-hz", + &data->vco_freq)) { + if (data->vco_freq < PLLDIG_MIN_VCO_FREQ || + data->vco_freq > PLLDIG_MAX_VCO_FREQ) + return -EINVAL; + } + + return plldig_init(&data->hw); +} + +static const struct of_device_id plldig_clk_id[] = { + { .compatible = "fsl,ls1028a-plldig" }, + { } +}; +MODULE_DEVICE_TABLE(of, plldig_clk_id); + +static struct platform_driver plldig_clk_driver = { + .driver = { + .name = "plldig-clock", + .of_match_table = plldig_clk_id, + }, + .probe = plldig_clk_probe, +}; +module_platform_driver(plldig_clk_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Wen He "); +MODULE_DESCRIPTION("LS1028A Display output interface pixel clock driver"); -- cgit v1.2.3