From 4f3549d72d1b5c90ecc7e673402f38f4486d22c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 22:15:29 +0200 Subject: Driver core: Add offline/online device operations In some cases, graceful hot-removal of devices is not possible, although in principle the devices in question support hotplug. For example, that may happen for the last CPU in the system or for memory modules holding kernel memory. In those cases it is nice to be able to check if the given device can be gracefully hot-removed before triggering a removal procedure that cannot be aborted or reversed. Unfortunately, however, the kernel currently doesn't provide any support for that. To address that deficiency, introduce support for offline and online operations that can be performed on devices, respectively, before a hot-removal and in case when it is necessary (or convenient) to put a device back online after a successful offline (that has not been followed by removal). The idea is that the offline will fail whenever the given device cannot be gracefully removed from the system and it will not be allowed to use the device after a successful offline (until a subsequent online) in analogy with the existing CPU offline/online mechanism. For now, the offline and online operations are introduced at the bus type level, as that should be sufficient for the most urgent use cases (CPUs and memory modules). In the future, however, the approach may be extended to cover some more complicated device offline/online scenarios involving device drivers etc. The lock_device_hotplug() and unlock_device_hotplug() functions are introduced because subsequent patches need to put larger pieces of code under device_hotplug_lock to prevent race conditions between device offline and removal from happening. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani --- drivers/base/core.c | 130 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) (limited to 'drivers/base') diff --git a/drivers/base/core.c b/drivers/base/core.c index 016312437577..60c975686089 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -403,6 +403,36 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, static struct device_attribute uevent_attr = __ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent); +static ssize_t show_online(struct device *dev, struct device_attribute *attr, + char *buf) +{ + bool val; + + lock_device_hotplug(); + val = !dev->offline; + unlock_device_hotplug(); + return sprintf(buf, "%u\n", val); +} + +static ssize_t store_online(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + bool val; + int ret; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + lock_device_hotplug(); + ret = val ? device_online(dev) : device_offline(dev); + unlock_device_hotplug(); + return ret < 0 ? ret : count; +} + +static struct device_attribute online_attr = + __ATTR(online, S_IRUGO | S_IWUSR, show_online, store_online); + static int device_add_attributes(struct device *dev, struct device_attribute *attrs) { @@ -516,6 +546,12 @@ static int device_add_attrs(struct device *dev) if (error) goto err_remove_type_groups; + if (device_supports_offline(dev) && !dev->offline_disabled) { + error = device_create_file(dev, &online_attr); + if (error) + goto err_remove_type_groups; + } + return 0; err_remove_type_groups: @@ -536,6 +572,7 @@ static void device_remove_attrs(struct device *dev) struct class *class = dev->class; const struct device_type *type = dev->type; + device_remove_file(dev, &online_attr); device_remove_groups(dev, dev->groups); if (type) @@ -1431,6 +1468,99 @@ EXPORT_SYMBOL_GPL(put_device); EXPORT_SYMBOL_GPL(device_create_file); EXPORT_SYMBOL_GPL(device_remove_file); +static DEFINE_MUTEX(device_hotplug_lock); + +void lock_device_hotplug(void) +{ + mutex_lock(&device_hotplug_lock); +} + +void unlock_device_hotplug(void) +{ + mutex_unlock(&device_hotplug_lock); +} + +static int device_check_offline(struct device *dev, void *not_used) +{ + int ret; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + return device_supports_offline(dev) && !dev->offline ? -EBUSY : 0; +} + +/** + * device_offline - Prepare the device for hot-removal. + * @dev: Device to be put offline. + * + * Execute the device bus type's .offline() callback, if present, to prepare + * the device for a subsequent hot-removal. If that succeeds, the device must + * not be used until either it is removed or its bus type's .online() callback + * is executed. + * + * Call under device_hotplug_lock. + */ +int device_offline(struct device *dev) +{ + int ret; + + if (dev->offline_disabled) + return -EPERM; + + ret = device_for_each_child(dev, NULL, device_check_offline); + if (ret) + return ret; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = 1; + } else { + ret = dev->bus->offline(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_OFFLINE); + dev->offline = true; + } + } + } + device_unlock(dev); + + return ret; +} + +/** + * device_online - Put the device back online after successful device_offline(). + * @dev: Device to be put back online. + * + * If device_offline() has been successfully executed for @dev, but the device + * has not been removed subsequently, execute its bus type's .online() callback + * to indicate that the device can be used again. + * + * Call under device_hotplug_lock. + */ +int device_online(struct device *dev) +{ + int ret = 0; + + device_lock(dev); + if (device_supports_offline(dev)) { + if (dev->offline) { + ret = dev->bus->online(dev); + if (!ret) { + kobject_uevent(&dev->kobj, KOBJ_ONLINE); + dev->offline = false; + } + } else { + ret = 1; + } + } + device_unlock(dev); + + return ret; +} + struct root_device { struct device dev; struct module *owner; -- cgit v1.2.3 From 0902a9044fa5b7a0456ea4daacec2c2b3189ba8c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 May 2013 00:25:49 +0200 Subject: Driver core: Use generic offline/online for CPU offline/online Rework the CPU hotplug code in drivers/base/cpu.c to use the generic offline/online support introduced previously instead of its own CPU-specific code. For this purpose, modify cpu_subsys to provide offline and online callbacks for CONFIG_HOTPLUG_CPU set and remove the code handling the CPU-specific 'online' sysfs attribute. This modification is not supposed to change the user-observable behavior of the kernel (i.e. the 'online' attribute will be present in exactly the same place in sysfs and should trigger exactly the same actions as before). Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani --- drivers/base/cpu.c | 89 ++++++++++++++++++++---------------------------------- 1 file changed, 32 insertions(+), 57 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 3d48fc887ef4..25c8768172e9 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -16,12 +16,6 @@ #include "base.h" -struct bus_type cpu_subsys = { - .name = "cpu", - .dev_name = "cpu", -}; -EXPORT_SYMBOL_GPL(cpu_subsys); - static DEFINE_PER_CPU(struct device *, cpu_sys_devices); #ifdef CONFIG_HOTPLUG_CPU @@ -34,69 +28,45 @@ static void change_cpu_under_node(struct cpu *cpu, cpu->node_id = to_nid; } -static ssize_t show_online(struct device *dev, - struct device_attribute *attr, - char *buf) +static int __ref cpu_subsys_online(struct device *dev) { struct cpu *cpu = container_of(dev, struct cpu, dev); + int cpuid = dev->id; + int from_nid, to_nid; + int ret; + + cpu_hotplug_driver_lock(); + + from_nid = cpu_to_node(cpuid); + ret = cpu_up(cpuid); + /* + * When hot adding memory to memoryless node and enabling a cpu + * on the node, node number of the cpu may internally change. + */ + to_nid = cpu_to_node(cpuid); + if (from_nid != to_nid) + change_cpu_under_node(cpu, from_nid, to_nid); - return sprintf(buf, "%u\n", !!cpu_online(cpu->dev.id)); + cpu_hotplug_driver_unlock(); + return ret; } -static ssize_t __ref store_online(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int cpu_subsys_offline(struct device *dev) { - struct cpu *cpu = container_of(dev, struct cpu, dev); - int cpuid = cpu->dev.id; - int from_nid, to_nid; - ssize_t ret; + int ret; cpu_hotplug_driver_lock(); - switch (buf[0]) { - case '0': - ret = cpu_down(cpuid); - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_OFFLINE); - break; - case '1': - from_nid = cpu_to_node(cpuid); - ret = cpu_up(cpuid); - - /* - * When hot adding memory to memoryless node and enabling a cpu - * on the node, node number of the cpu may internally change. - */ - to_nid = cpu_to_node(cpuid); - if (from_nid != to_nid) - change_cpu_under_node(cpu, from_nid, to_nid); - - if (!ret) - kobject_uevent(&dev->kobj, KOBJ_ONLINE); - break; - default: - ret = -EINVAL; - } + ret = cpu_down(dev->id); cpu_hotplug_driver_unlock(); - - if (ret >= 0) - ret = count; return ret; } -static DEVICE_ATTR(online, 0644, show_online, store_online); -static void __cpuinit register_cpu_control(struct cpu *cpu) -{ - device_create_file(&cpu->dev, &dev_attr_online); -} void unregister_cpu(struct cpu *cpu) { int logical_cpu = cpu->dev.id; unregister_cpu_under_node(logical_cpu, cpu_to_node(logical_cpu)); - device_remove_file(&cpu->dev, &dev_attr_online); - device_unregister(&cpu->dev); per_cpu(cpu_sys_devices, logical_cpu) = NULL; return; @@ -123,12 +93,18 @@ static DEVICE_ATTR(probe, S_IWUSR, NULL, cpu_probe_store); static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ -#else /* ... !CONFIG_HOTPLUG_CPU */ -static inline void register_cpu_control(struct cpu *cpu) -{ -} #endif /* CONFIG_HOTPLUG_CPU */ +struct bus_type cpu_subsys = { + .name = "cpu", + .dev_name = "cpu", +#ifdef CONFIG_HOTPLUG_CPU + .online = cpu_subsys_online, + .offline = cpu_subsys_offline, +#endif +}; +EXPORT_SYMBOL_GPL(cpu_subsys); + #ifdef CONFIG_KEXEC #include @@ -277,12 +253,11 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->dev.id = num; cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; + cpu->dev.offline_disabled = !cpu->hotpluggable; #ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE cpu->dev.bus->uevent = arch_cpu_uevent; #endif error = device_register(&cpu->dev); - if (!error && cpu->hotpluggable) - register_cpu_control(cpu); if (!error) per_cpu(cpu_sys_devices, num) = &cpu->dev; if (!error) -- cgit v1.2.3 From ac212b6980d8d5eda705864fc5a8ecddc6d6eacc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 May 2013 00:26:22 +0200 Subject: ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani --- drivers/acpi/Makefile | 1 + drivers/acpi/acpi_processor.c | 484 ++++++++++++++++++++++++ drivers/acpi/glue.c | 6 +- drivers/acpi/internal.h | 3 + drivers/acpi/processor_driver.c | 807 ++++------------------------------------ drivers/acpi/scan.c | 1 + drivers/base/cpu.c | 11 + include/acpi/processor.h | 5 + 8 files changed, 587 insertions(+), 731 deletions(-) create mode 100644 drivers/acpi/acpi_processor.c (limited to 'drivers/base') diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..93e49bde31ba 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -34,6 +34,7 @@ acpi-$(CONFIG_ACPI_SLEEP) += proc.o acpi-y += bus.o glue.o acpi-y += scan.o acpi-y += resource.o +acpi-y += acpi_processor.o acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c new file mode 100644 index 000000000000..587d2af4b323 --- /dev/null +++ b/drivers/acpi/acpi_processor.c @@ -0,0 +1,484 @@ +/* + * acpi_processor.c - ACPI processor enumeration support + * + * Copyright (C) 2001, 2002 Andy Grover + * Copyright (C) 2001, 2002 Paul Diefenbaugh + * Copyright (C) 2004 Dominik Brodowski + * Copyright (C) 2004 Anil S Keshavamurthy + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include + +#include "internal.h" + +#define _COMPONENT ACPI_PROCESSOR_COMPONENT + +ACPI_MODULE_NAME("processor"); + +/* -------------------------------------------------------------------------- + Errata Handling + -------------------------------------------------------------------------- */ + +struct acpi_processor_errata errata __read_mostly; +EXPORT_SYMBOL_GPL(errata); + +static int acpi_processor_errata_piix4(struct pci_dev *dev) +{ + u8 value1 = 0; + u8 value2 = 0; + + + if (!dev) + return -EINVAL; + + /* + * Note that 'dev' references the PIIX4 ACPI Controller. + */ + + switch (dev->revision) { + case 0: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); + break; + case 1: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); + break; + case 2: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); + break; + case 3: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); + break; + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); + break; + } + + switch (dev->revision) { + + case 0: /* PIIX4 A-step */ + case 1: /* PIIX4 B-step */ + /* + * See specification changes #13 ("Manual Throttle Duty Cycle") + * and #14 ("Enabling and Disabling Manual Throttle"), plus + * erratum #5 ("STPCLK# Deassertion Time") from the January + * 2002 PIIX4 specification update. Applies to only older + * PIIX4 models. + */ + errata.piix4.throttle = 1; + + case 2: /* PIIX4E */ + case 3: /* PIIX4M */ + /* + * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA + * Livelock") from the January 2002 PIIX4 specification update. + * Applies to all PIIX4 models. + */ + + /* + * BM-IDE + * ------ + * Find the PIIX4 IDE Controller and get the Bus Master IDE + * Status register address. We'll use this later to read + * each IDE controller's DMA status to make sure we catch all + * DMA activity. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + errata.piix4.bmisx = pci_resource_start(dev, 4); + pci_dev_put(dev); + } + + /* + * Type-F DMA + * ---------- + * Find the PIIX4 ISA Controller and read the Motherboard + * DMA controller's status to see if Type-F (Fast) DMA mode + * is enabled (bit 7) on either channel. Note that we'll + * disable C3 support if this is enabled, as some legacy + * devices won't operate well if fast DMA is disabled. + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_0, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (dev) { + pci_read_config_byte(dev, 0x76, &value1); + pci_read_config_byte(dev, 0x77, &value2); + if ((value1 & 0x80) || (value2 & 0x80)) + errata.piix4.fdma = 1; + pci_dev_put(dev); + } + + break; + } + + if (errata.piix4.bmisx) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus master activity detection (BM-IDE) erratum enabled\n")); + if (errata.piix4.fdma) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Type-F DMA livelock erratum (C3 disabled)\n")); + + return 0; +} + +static int acpi_processor_errata(struct acpi_processor *pr) +{ + int result = 0; + struct pci_dev *dev = NULL; + + + if (!pr) + return -EINVAL; + + /* + * PIIX4 + */ + dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, + PCI_ANY_ID, NULL); + if (dev) { + result = acpi_processor_errata_piix4(dev); + pci_dev_put(dev); + } + + return result; +} + +/* -------------------------------------------------------------------------- + Initialization + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +static int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + unsigned long long sta; + acpi_status status; + int ret; + + status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) + return -ENODEV; + + ret = acpi_map_lsapic(pr->handle, &pr->id); + if (ret) + return ret; + + ret = arch_register_cpu(pr->id); + if (ret) { + acpi_unmap_lsapic(pr->id); + return ret; + } + + /* + * CPU got hot-added, but cpu_data is not initialized yet. Set a flag + * to delay cpu_idle/throttling initialization and do it when the CPU + * gets online for the first time. + */ + pr_info("CPU%d has been hot-added\n", pr->id); + pr->flags.need_hotplug_init = 1; + return 0; +} +#else +static inline int acpi_processor_hotadd_init(struct acpi_processor *pr) +{ + return -ENODEV; +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +static int acpi_processor_get_info(struct acpi_device *device) +{ + union acpi_object object = { 0 }; + struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_processor *pr = acpi_driver_data(device); + int cpu_index, device_declaration = 0; + acpi_status status = AE_OK; + static int cpu0_initialized; + + if (num_online_cpus() > 1) + errata.smp = TRUE; + + acpi_processor_errata(pr); + + /* + * Check to see if we have bus mastering arbitration control. This + * is required for proper C3 usage (to maintain cache coherency). + */ + if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { + pr->flags.bm_control = 1; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Bus mastering arbitration control present\n")); + } else + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "No bus mastering arbitration control\n")); + + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { + /* Declared with "Processor" statement; match ProcessorID */ + status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor object (0x%x)\n", + status); + return -ENODEV; + } + + /* + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ + pr->acpi_id = object.processor.proc_id; + } else { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ + unsigned long long value; + status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, + NULL, &value); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, + "Failed to evaluate processor _UID (0x%x)\n", + status); + return -ENODEV; + } + device_declaration = 1; + pr->acpi_id = value; + } + cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); + + /* Handle UP system running SMP kernel, with no LAPIC in MADT */ + if (!cpu0_initialized && (cpu_index == -1) && + (num_online_cpus() == 1)) { + cpu_index = 0; + } + + cpu0_initialized = 1; + + pr->id = cpu_index; + + /* + * Extra Processor objects may be enumerated on MP systems with + * less than the max # of CPUs. They should be ignored _iff + * they are physically not present. + */ + if (pr->id == -1) { + int ret = acpi_processor_hotadd_init(pr); + if (ret) + return ret; + } + /* + * On some boxes several processors use the same processor bus id. + * But they are located in different scope. For example: + * \_SB.SCK0.CPU0 + * \_SB.SCK1.CPU0 + * Rename the processor device bus id. And the new bus id will be + * generated as the following format: + * CPU+CPU ID. + */ + sprintf(acpi_device_bid(device), "CPU%X", pr->id); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, + pr->acpi_id)); + + if (!object.processor.pblk_address) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); + else if (object.processor.pblk_length != 6) + dev_err(&device->dev, "Invalid PBLK length [%d]\n", + object.processor.pblk_length); + else { + pr->throttling.address = object.processor.pblk_address; + pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; + pr->throttling.duty_width = acpi_gbl_FADT.duty_width; + + pr->pblk = object.processor.pblk_address; + + /* + * We don't care about error returns - we just try to mark + * these reserved so that nobody else is confused into thinking + * that this region might be unused.. + * + * (In particular, allocating the IO range for Cardbus) + */ + request_region(pr->throttling.address, 6, "ACPI CPU throttle"); + } + + /* + * If ACPI describes a slot number for this CPU, we can use it to + * ensure we get the right value in the "physical id" field + * of /proc/cpuinfo + */ + status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); + if (ACPI_SUCCESS(status)) + arch_fix_phys_package_id(pr->id, object.integer.value); + + return 0; +} + +/* + * Do not put anything in here which needs the core to be online. + * For example MSR access or setting up things which check for cpuinfo_x86 + * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. + * Such things have to be put in and set up by the processor driver's .probe(). + */ +static DEFINE_PER_CPU(void *, processor_device_array); + +static int __cpuinit acpi_processor_add(struct acpi_device *device, + const struct acpi_device_id *id) +{ + struct acpi_processor *pr; + struct device *dev; + int result = 0; + + pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); + if (!pr) + return -ENOMEM; + + if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free_pr; + } + + pr->handle = device->handle; + strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); + device->driver_data = pr; + + result = acpi_processor_get_info(device); + if (result) /* Processor is not physically present or unavailable */ + return 0; + +#ifdef CONFIG_SMP + if (pr->id >= setup_max_cpus && pr->id != 0) + return 0; +#endif + + BUG_ON(pr->id >= nr_cpu_ids); + + /* + * Buggy BIOS check. + * ACPI id of processors can be reported wrongly by the BIOS. + * Don't trust it blindly + */ + if (per_cpu(processor_device_array, pr->id) != NULL && + per_cpu(processor_device_array, pr->id) != device) { + dev_warn(&device->dev, + "BIOS reported wrong ACPI id %d for the processor\n", + pr->id); + /* Give up, but do not abort the namespace scan. */ + goto err; + } + /* + * processor_device_array is not cleared on errors to allow buggy BIOS + * checks. + */ + per_cpu(processor_device_array, pr->id) = device; + + dev = get_cpu_device(pr->id); + ACPI_HANDLE_SET(dev, pr->handle); + result = acpi_bind_one(dev, NULL); + if (result) + goto err; + + pr->dev = dev; + dev->offline = pr->flags.need_hotplug_init; + + /* Trigger the processor driver's .probe() if present. */ + if (device_attach(dev) >= 0) + return 1; + + dev_err(dev, "Processor driver could not be attached\n"); + acpi_unbind_one(dev); + + err: + free_cpumask_var(pr->throttling.shared_cpu_map); + device->driver_data = NULL; + err_free_pr: + kfree(pr); + return result; +} + +#ifdef CONFIG_ACPI_HOTPLUG_CPU +/* -------------------------------------------------------------------------- + Removal + -------------------------------------------------------------------------- */ + +static void acpi_processor_remove(struct acpi_device *device) +{ + struct acpi_processor *pr; + + if (!device || !acpi_driver_data(device)) + return; + + pr = acpi_driver_data(device); + if (pr->id >= nr_cpu_ids) + goto out; + + /* + * The only reason why we ever get here is CPU hot-removal. The CPU is + * already offline and the ACPI device removal locking prevents it from + * being put back online at this point. + * + * Unbind the driver from the processor device and detach it from the + * ACPI companion object. + */ + device_release_driver(pr->dev); + acpi_unbind_one(pr->dev); + + /* Clean up. */ + per_cpu(processor_device_array, pr->id) = NULL; + try_offline_node(cpu_to_node(pr->id)); + + /* Remove the CPU. */ + get_online_cpus(); + arch_unregister_cpu(pr->id); + acpi_unmap_lsapic(pr->id); + put_online_cpus(); + + out: + free_cpumask_var(pr->throttling.shared_cpu_map); + kfree(pr); +} +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +/* + * The following ACPI IDs are known to be suitable for representing as + * processor devices. + */ +static const struct acpi_device_id processor_device_ids[] = { + + { ACPI_PROCESSOR_OBJECT_HID, }, + { ACPI_PROCESSOR_DEVICE_HID, }, + + { } +}; + +static struct acpi_scan_handler __refdata processor_handler = { + .ids = processor_device_ids, + .attach = acpi_processor_add, +#ifdef CONFIG_ACPI_HOTPLUG_CPU + .detach = acpi_processor_remove, +#endif + .hotplug = { + .enabled = true, + }, +}; + +void __init acpi_processor_init(void) +{ + acpi_scan_add_handler_with_hotplug(&processor_handler, "processor"); +} diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 40a84cc6740c..9783f400d857 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -105,7 +105,7 @@ acpi_handle acpi_get_child(acpi_handle parent, u64 address) } EXPORT_SYMBOL(acpi_get_child); -static int acpi_bind_one(struct device *dev, acpi_handle handle) +int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; acpi_status status; @@ -188,8 +188,9 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) kfree(physical_node); goto err; } +EXPORT_SYMBOL_GPL(acpi_bind_one); -static int acpi_unbind_one(struct device *dev) +int acpi_unbind_one(struct device *dev) { struct acpi_device_physical_node *entry; struct acpi_device *acpi_dev; @@ -238,6 +239,7 @@ err: dev_err(dev, "Oops, 'acpi_handle' corrupt\n"); return -EINVAL; } +EXPORT_SYMBOL_GPL(acpi_unbind_one); static int acpi_platform_notify(struct device *dev) { diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 4548f0a114ce..bf792595132c 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -33,6 +33,7 @@ static inline void acpi_pci_slot_init(void) { } void acpi_pci_root_init(void); void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); +void acpi_processor_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); void acpi_csrt_init(void); @@ -79,6 +80,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, int type, unsigned long long sta); void acpi_device_add_finalize(struct acpi_device *device); void acpi_free_pnp_ids(struct acpi_device_pnp *pnp); +int acpi_bind_one(struct device *dev, acpi_handle handle); +int acpi_unbind_one(struct device *dev); /* -------------------------------------------------------------------------- Power Resource diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index c266cdc11784..ac28f18823b3 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -1,11 +1,13 @@ /* - * acpi_processor.c - ACPI Processor Driver ($Revision: 71 $) + * processor_driver.c - ACPI Processor Driver * * Copyright (C) 2001, 2002 Andy Grover * Copyright (C) 2001, 2002 Paul Diefenbaugh * Copyright (C) 2004 Dominik Brodowski * Copyright (C) 2004 Anil S Keshavamurthy * - Added processor hotplug support + * Copyright (C) 2013, Intel Corporation + * Rafael J. Wysocki * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -24,52 +26,29 @@ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * TBD: - * 1. Make # power states dynamic. - * 2. Support duty_cycle values that span bit 4. - * 3. Optimize by having scheduler determine business instead of - * having us try to calculate it here. - * 4. Need C1 timing -- must modify kernel (IRQ handler) to get this. */ #include #include #include -#include -#include -#include #include #include -#include -#include #include #include #include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include + #include +#include "internal.h" + #define PREFIX "ACPI: " -#define ACPI_PROCESSOR_CLASS "processor" -#define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" #define ACPI_PROCESSOR_FILE_THROTTLING "throttling" #define ACPI_PROCESSOR_FILE_LIMIT "limit" #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 -#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -81,12 +60,8 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Processor Driver"); MODULE_LICENSE("GPL"); -static int acpi_processor_add(struct acpi_device *device); -static int acpi_processor_remove(struct acpi_device *device); -static void acpi_processor_notify(struct acpi_device *device, u32 event); -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr); -static int acpi_processor_handle_eject(struct acpi_processor *pr); -static int acpi_processor_start(struct acpi_processor *pr); +static int acpi_processor_start(struct device *dev); +static int acpi_processor_stop(struct device *dev); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, @@ -95,295 +70,27 @@ static const struct acpi_device_id processor_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); -static struct acpi_driver acpi_processor_driver = { +static struct device_driver acpi_processor_driver = { .name = "processor", - .class = ACPI_PROCESSOR_CLASS, - .ids = processor_device_ids, - .ops = { - .add = acpi_processor_add, - .remove = acpi_processor_remove, - .notify = acpi_processor_notify, - }, + .bus = &cpu_subsys, + .acpi_match_table = processor_device_ids, + .probe = acpi_processor_start, + .remove = acpi_processor_stop, }; -#define INSTALL_NOTIFY_HANDLER 1 -#define UNINSTALL_NOTIFY_HANDLER 2 - DEFINE_PER_CPU(struct acpi_processor *, processors); EXPORT_PER_CPU_SYMBOL(processors); -struct acpi_processor_errata errata __read_mostly; - -/* -------------------------------------------------------------------------- - Errata Handling - -------------------------------------------------------------------------- */ - -static int acpi_processor_errata_piix4(struct pci_dev *dev) +static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { - u8 value1 = 0; - u8 value2 = 0; - - - if (!dev) - return -EINVAL; - - /* - * Note that 'dev' references the PIIX4 ACPI Controller. - */ - - switch (dev->revision) { - case 0: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); - break; - case 1: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n")); - break; - case 2: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n")); - break; - case 3: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n")); - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n")); - break; - } - - switch (dev->revision) { - - case 0: /* PIIX4 A-step */ - case 1: /* PIIX4 B-step */ - /* - * See specification changes #13 ("Manual Throttle Duty Cycle") - * and #14 ("Enabling and Disabling Manual Throttle"), plus - * erratum #5 ("STPCLK# Deassertion Time") from the January - * 2002 PIIX4 specification update. Applies to only older - * PIIX4 models. - */ - errata.piix4.throttle = 1; - - case 2: /* PIIX4E */ - case 3: /* PIIX4M */ - /* - * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA - * Livelock") from the January 2002 PIIX4 specification update. - * Applies to all PIIX4 models. - */ - - /* - * BM-IDE - * ------ - * Find the PIIX4 IDE Controller and get the Bus Master IDE - * Status register address. We'll use this later to read - * each IDE controller's DMA status to make sure we catch all - * DMA activity. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - errata.piix4.bmisx = pci_resource_start(dev, 4); - pci_dev_put(dev); - } - - /* - * Type-F DMA - * ---------- - * Find the PIIX4 ISA Controller and read the Motherboard - * DMA controller's status to see if Type-F (Fast) DMA mode - * is enabled (bit 7) on either channel. Note that we'll - * disable C3 support if this is enabled, as some legacy - * devices won't operate well if fast DMA is disabled. - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_0, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_read_config_byte(dev, 0x76, &value1); - pci_read_config_byte(dev, 0x77, &value2); - if ((value1 & 0x80) || (value2 & 0x80)) - errata.piix4.fdma = 1; - pci_dev_put(dev); - } - - break; - } - - if (errata.piix4.bmisx) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus master activity detection (BM-IDE) erratum enabled\n")); - if (errata.piix4.fdma) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Type-F DMA livelock erratum (C3 disabled)\n")); - - return 0; -} - -static int acpi_processor_errata(struct acpi_processor *pr) -{ - int result = 0; - struct pci_dev *dev = NULL; - - - if (!pr) - return -EINVAL; - - /* - * PIIX4 - */ - dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, - PCI_ANY_ID, NULL); - if (dev) { - result = acpi_processor_errata_piix4(dev); - pci_dev_put(dev); - } - - return result; -} - -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ - -static int acpi_processor_get_info(struct acpi_device *device) -{ - acpi_status status = 0; - union acpi_object object = { 0 }; - struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; + struct acpi_device *device = data; struct acpi_processor *pr; - int cpu_index, device_declaration = 0; - static int cpu0_initialized; - - pr = acpi_driver_data(device); - if (!pr) - return -EINVAL; - - if (num_online_cpus() > 1) - errata.smp = TRUE; - - acpi_processor_errata(pr); - - /* - * Check to see if we have bus mastering arbitration control. This - * is required for proper C3 usage (to maintain cache coherency). - */ - if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) { - pr->flags.bm_control = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Bus mastering arbitration control present\n")); - } else - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "No bus mastering arbitration control\n")); - - if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { - /* Declared with "Processor" statement; match ProcessorID */ - status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor object (0x%x)\n", - status); - return -ENODEV; - } - - /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in - * arch/xxx/acpi.c - */ - pr->acpi_id = object.processor.proc_id; - } else { - /* - * Declared with "Device" statement; match _UID. - * Note that we don't handle string _UIDs yet. - */ - unsigned long long value; - status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, - NULL, &value); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, - "Failed to evaluate processor _UID (0x%x)\n", - status); - return -ENODEV; - } - device_declaration = 1; - pr->acpi_id = value; - } - cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id); - - /* Handle UP system running SMP kernel, with no LAPIC in MADT */ - if (!cpu0_initialized && (cpu_index == -1) && - (num_online_cpus() == 1)) { - cpu_index = 0; - } - - cpu0_initialized = 1; - - pr->id = cpu_index; - - /* - * Extra Processor objects may be enumerated on MP systems with - * less than the max # of CPUs. They should be ignored _iff - * they are physically not present. - */ - if (pr->id == -1) { - if (ACPI_FAILURE(acpi_processor_hotadd_init(pr))) - return -ENODEV; - } - /* - * On some boxes several processors use the same processor bus id. - * But they are located in different scope. For example: - * \_SB.SCK0.CPU0 - * \_SB.SCK1.CPU0 - * Rename the processor device bus id. And the new bus id will be - * generated as the following format: - * CPU+CPU ID. - */ - sprintf(acpi_device_bid(device), "CPU%X", pr->id); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id, - pr->acpi_id)); - - if (!object.processor.pblk_address) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n")); - else if (object.processor.pblk_length != 6) - dev_err(&device->dev, "Invalid PBLK length [%d]\n", - object.processor.pblk_length); - else { - pr->throttling.address = object.processor.pblk_address; - pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset; - pr->throttling.duty_width = acpi_gbl_FADT.duty_width; - - pr->pblk = object.processor.pblk_address; - - /* - * We don't care about error returns - we just try to mark - * these reserved so that nobody else is confused into thinking - * that this region might be unused.. - * - * (In particular, allocating the IO range for Cardbus) - */ - request_region(pr->throttling.address, 6, "ACPI CPU throttle"); - } - - /* - * If ACPI describes a slot number for this CPU, we can use it - * ensure we get the right value in the "physical id" field - * of /proc/cpuinfo - */ - status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer); - if (ACPI_SUCCESS(status)) - arch_fix_phys_package_id(pr->id, object.integer.value); - - return 0; -} - -static DEFINE_PER_CPU(void *, processor_device_array); - -static void acpi_processor_notify(struct acpi_device *device, u32 event) -{ - struct acpi_processor *pr = acpi_driver_data(device); int saved; + if (device->handle != handle) + return; + + pr = acpi_driver_data(device); if (!pr) return; @@ -420,55 +127,62 @@ static void acpi_processor_notify(struct acpi_device *device, u32 event) return; } -static int acpi_cpu_soft_notify(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static __cpuinit int __acpi_processor_start(struct acpi_device *device); + +static int __cpuinit acpi_cpu_soft_notify(struct notifier_block *nfb, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; struct acpi_processor *pr = per_cpu(processors, cpu); + struct acpi_device *device; - if (action == CPU_ONLINE && pr) { - /* CPU got physically hotplugged and onlined the first time: - * Initialize missing things + if (!pr || acpi_bus_get_device(pr->handle, &device)) + return NOTIFY_DONE; + + if (action == CPU_ONLINE) { + /* + * CPU got physically hotplugged and onlined for the first time: + * Initialize missing things. */ if (pr->flags.need_hotplug_init) { + int ret; + pr_info("Will online and init hotplugged CPU: %d\n", pr->id); - WARN(acpi_processor_start(pr), "Failed to start CPU:" - " %d\n", pr->id); pr->flags.need_hotplug_init = 0; - /* Normal CPU soft online event */ + ret = __acpi_processor_start(device); + WARN(ret, "Failed to start CPU: %d\n", pr->id); } else { + /* Normal CPU soft online event. */ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } - } - if (action == CPU_DEAD && pr) { - /* invalidate the flag.throttling after one CPU is offline */ + } else if (action == CPU_DEAD) { + /* Invalidate flag.throttling after the CPU is offline. */ acpi_processor_reevaluate_tstate(pr, action); } return NOTIFY_OK; } -static struct notifier_block acpi_cpu_notifier = +static struct notifier_block __refdata acpi_cpu_notifier = { .notifier_call = acpi_cpu_soft_notify, }; -/* - * acpi_processor_start() is called by the cpu_hotplug_notifier func: - * acpi_cpu_soft_notify(). Getting it __cpuinit{data} is difficult, the - * root cause seem to be that acpi_processor_uninstall_hotplug_notify() - * is in the module_exit (__exit) func. Allowing acpi_processor_start() - * to not be in __cpuinit section, but being called from __cpuinit funcs - * via __ref looks like the right thing to do here. - */ -static __ref int acpi_processor_start(struct acpi_processor *pr) +static __cpuinit int __acpi_processor_start(struct acpi_device *device) { - struct acpi_device *device = per_cpu(processor_device_array, pr->id); + struct acpi_processor *pr = acpi_driver_data(device); + acpi_status status; int result = 0; + if (!pr) + return -ENODEV; + + if (pr->flags.need_hotplug_init) + return 0; + #ifdef CONFIG_CPU_FREQ acpi_processor_ppc_has_changed(pr, 0); acpi_processor_load_module(pr); @@ -506,129 +220,48 @@ static __ref int acpi_processor_start(struct acpi_processor *pr) goto err_remove_sysfs_thermal; } - return 0; + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify, device); + if (ACPI_SUCCESS(status)) + return 0; -err_remove_sysfs_thermal: + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + err_remove_sysfs_thermal: sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); -err_thermal_unregister: + err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); -err_power_exit: + err_power_exit: acpi_processor_power_exit(pr); - return result; } -/* - * Do not put anything in here which needs the core to be online. - * For example MSR access or setting up things which check for cpuinfo_x86 - * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. - * Such things have to be put in and set up above in acpi_processor_start() - */ -static int __cpuinit acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_start(struct device *dev) { - struct acpi_processor *pr = NULL; - int result = 0; - struct device *dev; - - pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL); - if (!pr) - return -ENOMEM; + struct acpi_device *device; - if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - result = -ENOMEM; - goto err_free_pr; - } - - pr->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS); - device->driver_data = pr; - - result = acpi_processor_get_info(device); - if (result) { - /* Processor is physically not present */ - return 0; - } - -#ifdef CONFIG_SMP - if (pr->id >= setup_max_cpus && pr->id != 0) - return 0; -#endif - - BUG_ON(pr->id >= nr_cpu_ids); - - /* - * Buggy BIOS check - * ACPI id of processors can be reported wrongly by the BIOS. - * Don't trust it blindly - */ - if (per_cpu(processor_device_array, pr->id) != NULL && - per_cpu(processor_device_array, pr->id) != device) { - dev_warn(&device->dev, - "BIOS reported wrong ACPI id %d for the processor\n", - pr->id); - result = -ENODEV; - goto err_free_cpumask; - } - per_cpu(processor_device_array, pr->id) = device; - - per_cpu(processors, pr->id) = pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return -ENODEV; - dev = get_cpu_device(pr->id); - if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { - result = -EFAULT; - goto err_clear_processor; - } - - /* - * Do not start hotplugged CPUs now, but when they - * are onlined the first time - */ - if (pr->flags.need_hotplug_init) - return 0; - - result = acpi_processor_start(pr); - if (result) - goto err_remove_sysfs; - - return 0; - -err_remove_sysfs: - sysfs_remove_link(&device->dev.kobj, "sysdev"); -err_clear_processor: - /* - * processor_device_array is not cleared to allow checks for buggy BIOS - */ - per_cpu(processors, pr->id) = NULL; -err_free_cpumask: - free_cpumask_var(pr->throttling.shared_cpu_map); -err_free_pr: - kfree(pr); - return result; + return __acpi_processor_start(device); } -static int acpi_processor_remove(struct acpi_device *device) +static int acpi_processor_stop(struct device *dev) { - struct acpi_processor *pr = NULL; + struct acpi_device *device; + struct acpi_processor *pr; + if (acpi_bus_get_device(ACPI_HANDLE(dev), &device)) + return 0; - if (!device || !acpi_driver_data(device)) - return -EINVAL; + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_processor_notify); pr = acpi_driver_data(device); - - if (pr->id >= nr_cpu_ids) - goto free; - - if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) { - if (acpi_processor_handle_eject(pr)) - return -EINVAL; - } + if (!pr) + return 0; acpi_processor_power_exit(pr); - sysfs_remove_link(&device->dev.kobj, "sysdev"); - if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); @@ -637,331 +270,47 @@ static int acpi_processor_remove(struct acpi_device *device) } per_cpu(processors, pr->id) = NULL; - per_cpu(processor_device_array, pr->id) = NULL; - try_offline_node(cpu_to_node(pr->id)); - -free: - free_cpumask_var(pr->throttling.shared_cpu_map); - kfree(pr); - return 0; } -#ifdef CONFIG_ACPI_HOTPLUG_CPU -/**************************************************************************** - * Acpi processor hotplug support * - ****************************************************************************/ - -static int is_processor_present(acpi_handle handle) -{ - acpi_status status; - unsigned long long sta = 0; - - - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - - if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) - return 1; - - /* - * _STA is mandatory for a processor that supports hot plug - */ - if (status == AE_NOT_FOUND) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor does not support hot plug\n")); - else - ACPI_EXCEPTION((AE_INFO, status, - "Processor Device is not present")); - return 0; -} - -static void acpi_processor_hotplug_notify(acpi_handle handle, - u32 event, void *data) -{ - struct acpi_device *device = NULL; - struct acpi_eject_event *ej_event = NULL; - u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */ - acpi_status status; - int result; - - acpi_scan_lock_acquire(); - - switch (event) { - case ACPI_NOTIFY_BUS_CHECK: - case ACPI_NOTIFY_DEVICE_CHECK: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor driver received %s event\n", - (event == ACPI_NOTIFY_BUS_CHECK) ? - "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK")); - - if (!is_processor_present(handle)) - break; - - if (!acpi_bus_get_device(handle, &device)) - break; - - result = acpi_bus_scan(handle); - if (result) { - acpi_handle_err(handle, "Unable to add the device\n"); - break; - } - result = acpi_bus_get_device(handle, &device); - if (result) { - acpi_handle_err(handle, "Missing device object\n"); - break; - } - ost_code = ACPI_OST_SC_SUCCESS; - break; - - case ACPI_NOTIFY_EJECT_REQUEST: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "received ACPI_NOTIFY_EJECT_REQUEST\n")); - - if (acpi_bus_get_device(handle, &device)) { - acpi_handle_err(handle, - "Device don't exist, dropping EJECT\n"); - break; - } - if (!acpi_driver_data(device)) { - acpi_handle_err(handle, - "Driver data is NULL, dropping EJECT\n"); - break; - } - - ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL); - if (!ej_event) { - acpi_handle_err(handle, "No memory, dropping EJECT\n"); - break; - } - - get_device(&device->dev); - ej_event->device = device; - ej_event->event = ACPI_NOTIFY_EJECT_REQUEST; - /* The eject is carried out asynchronously. */ - status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, - ej_event); - if (ACPI_FAILURE(status)) { - put_device(&device->dev); - kfree(ej_event); - break; - } - goto out; - - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - - /* non-hotplug event; possibly handled by other handler */ - goto out; - } - - /* Inform firmware that the hotplug operation has completed */ - (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL); - - out: - acpi_scan_lock_release(); -} - -static acpi_status is_processor_device(acpi_handle handle) -{ - struct acpi_device_info *info; - char *hid; - acpi_status status; - - status = acpi_get_object_info(handle, &info); - if (ACPI_FAILURE(status)) - return status; - - if (info->type == ACPI_TYPE_PROCESSOR) { - kfree(info); - return AE_OK; /* found a processor object */ - } - - if (!(info->valid & ACPI_VALID_HID)) { - kfree(info); - return AE_ERROR; - } - - hid = info->hardware_id.string; - if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { - kfree(info); - return AE_ERROR; - } - - kfree(info); - return AE_OK; /* found a processor device object */ -} - -static acpi_status -processor_walk_namespace_cb(acpi_handle handle, - u32 lvl, void *context, void **rv) -{ - acpi_status status; - int *action = context; - - status = is_processor_device(handle); - if (ACPI_FAILURE(status)) - return AE_OK; /* not a processor; continue to walk */ - - switch (*action) { - case INSTALL_NOTIFY_HANDLER: - acpi_install_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify, - NULL); - break; - case UNINSTALL_NOTIFY_HANDLER: - acpi_remove_notify_handler(handle, - ACPI_SYSTEM_NOTIFY, - acpi_processor_hotplug_notify); - break; - default: - break; - } - - /* found a processor; skip walking underneath */ - return AE_CTRL_DEPTH; -} - -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - acpi_handle handle = pr->handle; - - if (!is_processor_present(handle)) { - return AE_ERROR; - } - - if (acpi_map_lsapic(handle, &pr->id)) - return AE_ERROR; - - if (arch_register_cpu(pr->id)) { - acpi_unmap_lsapic(pr->id); - return AE_ERROR; - } - - /* CPU got hot-plugged, but cpu_data is not initialized yet - * Set flag to delay cpu_idle/throttling initialization - * in: - * acpi_processor_add() - * acpi_processor_get_info() - * and do it when the CPU gets online the first time - * TBD: Cleanup above functions and try to do this more elegant. - */ - pr_info("CPU %d got hotplugged\n", pr->id); - pr->flags.need_hotplug_init = 1; - - return AE_OK; -} - -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - if (cpu_online(pr->id)) - cpu_down(pr->id); - - get_online_cpus(); - /* - * The cpu might become online again at this point. So we check whether - * the cpu has been onlined or not. If the cpu became online, it means - * that someone wants to use the cpu. So acpi_processor_handle_eject() - * returns -EAGAIN. - */ - if (unlikely(cpu_online(pr->id))) { - put_online_cpus(); - pr_warn("Failed to remove CPU %d, because other task " - "brought the CPU back online\n", pr->id); - return -EAGAIN; - } - arch_unregister_cpu(pr->id); - acpi_unmap_lsapic(pr->id); - put_online_cpus(); - return (0); -} -#else -static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) -{ - return AE_ERROR; -} -static int acpi_processor_handle_eject(struct acpi_processor *pr) -{ - return (-EINVAL); -} -#endif - -static -void acpi_processor_install_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - register_hotcpu_notifier(&acpi_cpu_notifier); -} - -static -void acpi_processor_uninstall_hotplug_notify(void) -{ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_ANY, - ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - processor_walk_namespace_cb, NULL, &action, NULL); -#endif - unregister_hotcpu_notifier(&acpi_cpu_notifier); -} - /* * We keep the driver loaded even when ACPI is not running. * This is needed for the powernow-k8 driver, that works even without * ACPI, but needs symbols from this driver */ -static int __init acpi_processor_init(void) +static int __init acpi_processor_driver_init(void) { int result = 0; if (acpi_disabled) return 0; - result = acpi_bus_register_driver(&acpi_processor_driver); + result = driver_register(&acpi_processor_driver); if (result < 0) return result; acpi_processor_syscore_init(); - - acpi_processor_install_hotplug_notify(); - + register_hotcpu_notifier(&acpi_cpu_notifier); acpi_thermal_cpufreq_init(); - acpi_processor_ppc_init(); - acpi_processor_throttling_init(); - return 0; } -static void __exit acpi_processor_exit(void) +static void __exit acpi_processor_driver_exit(void) { if (acpi_disabled) return; acpi_processor_ppc_exit(); - acpi_thermal_cpufreq_exit(); - - acpi_processor_uninstall_hotplug_notify(); - + unregister_hotcpu_notifier(&acpi_cpu_notifier); acpi_processor_syscore_exit(); - - acpi_bus_unregister_driver(&acpi_processor_driver); - - return; + driver_unregister(&acpi_processor_driver); } -module_init(acpi_processor_init); -module_exit(acpi_processor_exit); +module_init(acpi_processor_driver_init); +module_exit(acpi_processor_driver_exit); MODULE_ALIAS("processor"); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 4fd392005ef1..ad82bb2a37e0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2124,6 +2124,7 @@ int __init acpi_scan_init(void) acpi_pci_root_init(); acpi_pci_link_init(); + acpi_processor_init(); acpi_platform_init(); acpi_lpss_init(); acpi_csrt_init(); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 25c8768172e9..7431ba6fc2d4 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -13,11 +13,21 @@ #include #include #include +#include #include "base.h" static DEFINE_PER_CPU(struct device *, cpu_sys_devices); +static int cpu_subsys_match(struct device *dev, struct device_driver *drv) +{ + /* ACPI style match is the only one that may succeed. */ + if (acpi_driver_match_device(dev, drv)) + return 1; + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void change_cpu_under_node(struct cpu *cpu, unsigned int from_nid, unsigned int to_nid) @@ -98,6 +108,7 @@ static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); struct bus_type cpu_subsys = { .name = "cpu", .dev_name = "cpu", + .match = cpu_subsys_match, #ifdef CONFIG_HOTPLUG_CPU .online = cpu_subsys_online, .offline = cpu_subsys_offline, diff --git a/include/acpi/processor.h b/include/acpi/processor.h index ea69367fdd3b..66096d06925e 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -6,6 +6,10 @@ #include #include +#define ACPI_PROCESSOR_CLASS "processor" +#define ACPI_PROCESSOR_DEVICE_NAME "Processor" +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" + #define ACPI_PROCESSOR_BUSY_METRIC 10 #define ACPI_PROCESSOR_MAX_POWER 8 @@ -207,6 +211,7 @@ struct acpi_processor { struct acpi_processor_throttling throttling; struct acpi_processor_limit limit; struct thermal_cooling_device *cdev; + struct device *dev; /* Processor device. */ }; struct acpi_processor_errata { -- cgit v1.2.3 From 4960e05e22604ee270a023f968e0e4f9bd0c6fef Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 14:18:37 +0200 Subject: Driver core: Introduce offline/online callbacks for memory blocks Introduce .offline() and .online() callbacks for memory_subsys that will allow the generic device_offline() and device_online() to be used with device objects representing memory blocks. That, in turn, allows the ACPI subsystem to use device_offline() to put removable memory blocks offline, if possible, before removing memory modules holding them. The 'online' sysfs attribute of memory block devices will attempt to put them offline if 0 is written to it and will attempt to apply the previously used online type when onlining them (i.e. when 1 is written to it). Signed-off-by: Rafael J. Wysocki Tested-by: Vasilis Liaskovitis Acked-by: Greg Kroah-Hartman Reviewed-by: Toshi Kani --- drivers/base/memory.c | 112 ++++++++++++++++++++++++++++++++++++++----------- include/linux/memory.h | 1 + 2 files changed, 88 insertions(+), 25 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 14f8a6954da0..c8f3b63fcacd 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -37,9 +37,14 @@ static inline int base_memory_block_id(int section_nr) return section_nr / sections_per_block; } +static int memory_subsys_online(struct device *dev); +static int memory_subsys_offline(struct device *dev); + static struct bus_type memory_subsys = { .name = MEMORY_CLASS_NAME, .dev_name = MEMORY_CLASS_NAME, + .online = memory_subsys_online, + .offline = memory_subsys_offline, }; static BLOCKING_NOTIFIER_HEAD(memory_chain); @@ -88,6 +93,7 @@ int register_memory(struct memory_block *memory) memory->dev.bus = &memory_subsys; memory->dev.id = memory->start_section_nr / sections_per_block; memory->dev.release = memory_block_release; + memory->dev.offline = memory->state == MEM_OFFLINE; error = device_register(&memory->dev); return error; @@ -278,33 +284,70 @@ static int __memory_block_change_state(struct memory_block *mem, { int ret = 0; - if (mem->state != from_state_req) { - ret = -EINVAL; - goto out; - } + if (mem->state != from_state_req) + return -EINVAL; if (to_state == MEM_OFFLINE) mem->state = MEM_GOING_OFFLINE; ret = memory_block_action(mem->start_section_nr, to_state, online_type); - if (ret) { mem->state = from_state_req; - goto out; + } else { + mem->state = to_state; + if (to_state == MEM_ONLINE) + mem->last_online = online_type; } + return ret; +} - mem->state = to_state; - switch (mem->state) { - case MEM_OFFLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); - break; - case MEM_ONLINE: - kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); - break; - default: - break; +static int memory_subsys_online(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; + + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_ONLINE ? 0 : + __memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, + mem->last_online); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int memory_subsys_offline(struct device *dev) +{ + struct memory_block *mem = container_of(dev, struct memory_block, dev); + int ret; + + mutex_lock(&mem->state_mutex); + + ret = mem->state == MEM_OFFLINE ? 0 : + __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + + mutex_unlock(&mem->state_mutex); + return ret; +} + +static int __memory_block_change_state_uevent(struct memory_block *mem, + unsigned long to_state, unsigned long from_state_req, + int online_type) +{ + int ret = __memory_block_change_state(mem, to_state, from_state_req, + online_type); + if (!ret) { + switch (mem->state) { + case MEM_OFFLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_OFFLINE); + break; + case MEM_ONLINE: + kobject_uevent(&mem->dev.kobj, KOBJ_ONLINE); + break; + default: + break; + } } -out: return ret; } @@ -315,8 +358,8 @@ static int memory_block_change_state(struct memory_block *mem, int ret; mutex_lock(&mem->state_mutex); - ret = __memory_block_change_state(mem, to_state, from_state_req, - online_type); + ret = __memory_block_change_state_uevent(mem, to_state, from_state_req, + online_type); mutex_unlock(&mem->state_mutex); return ret; @@ -326,22 +369,34 @@ store_mem_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct memory_block *mem; + bool offline; int ret = -EINVAL; mem = container_of(dev, struct memory_block, dev); - if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) + lock_device_hotplug(); + + if (!strncmp(buf, "online_kernel", min_t(int, count, 13))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KERNEL); - else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) + } else if (!strncmp(buf, "online_movable", min_t(int, count, 14))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_MOVABLE); - else if (!strncmp(buf, "online", min_t(int, count, 6))) + } else if (!strncmp(buf, "online", min_t(int, count, 6))) { + offline = false; ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, ONLINE_KEEP); - else if(!strncmp(buf, "offline", min_t(int, count, 7))) + } else if(!strncmp(buf, "offline", min_t(int, count, 7))) { + offline = true; ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + } + if (!ret) + dev->offline = offline; + + unlock_device_hotplug(); if (ret) return ret; @@ -563,6 +618,7 @@ static int init_memory_block(struct memory_block **memory, base_memory_block_id(scn_nr) * sections_per_block; mem->end_section_nr = mem->start_section_nr + sections_per_block - 1; mem->state = state; + mem->last_online = ONLINE_KEEP; mem->section_count++; mutex_init(&mem->state_mutex); start_pfn = section_nr_to_pfn(mem->start_section_nr); @@ -681,14 +737,20 @@ int unregister_memory_section(struct mem_section *section) /* * offline one memory block. If the memory block has been offlined, do nothing. + * + * Call under device_hotplug_lock. */ int offline_memory_block(struct memory_block *mem) { int ret = 0; mutex_lock(&mem->state_mutex); - if (mem->state != MEM_OFFLINE) - ret = __memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE, -1); + if (mem->state != MEM_OFFLINE) { + ret = __memory_block_change_state_uevent(mem, MEM_OFFLINE, + MEM_ONLINE, -1); + if (!ret) + mem->dev.offline = true; + } mutex_unlock(&mem->state_mutex); return ret; diff --git a/include/linux/memory.h b/include/linux/memory.h index 85c31a8e2904..3d5346583022 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -26,6 +26,7 @@ struct memory_block { unsigned long start_section_nr; unsigned long end_section_nr; unsigned long state; + int last_online; int section_count; /* -- cgit v1.2.3 From 1001b4d4a8ee6b2e7a6078a02ccdf68f91b192bd Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Thu, 30 May 2013 00:30:05 +0200 Subject: CPU: Fix sysfs cpu/online of offlined CPUs As reported by Dave Hansen, sysfs cpu/online shows 1 for offlined CPUs at boot. Fix this problem by initializing dev.offline with cpu_online() when registering a CPU. References: https://lkml.org/lkml/2013/5/29/403 Reported-and-tested-by: Dave Hansen Signed-off-by: Toshi Kani Signed-off-by: Rafael J. Wysocki --- drivers/base/cpu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/base') diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 7431ba6fc2d4..1d110dc6f0c1 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -265,6 +265,7 @@ int __cpuinit register_cpu(struct cpu *cpu, int num) cpu->dev.bus = &cpu_subsys; cpu->dev.release = cpu_device_release; cpu->dev.offline_disabled = !cpu->hotpluggable; + cpu->dev.offline = !cpu_online(num); #ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE cpu->dev.bus->uevent = arch_cpu_uevent; #endif -- cgit v1.2.3 From b2c064b25ad07169b2892a733918e6b941bf3366 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:38:55 +0200 Subject: Driver core / memory: Simplify __memory_block_change_state() As noted by Tang Chen, the last_online field in struct memory_block introduced by commit 4960e05 (Driver core: Introduce offline/online callbacks for memory blocks) is not really necessary, because online_pages() restores the previous state if passed ONLINE_KEEP as the last argument. Therefore, remove that field along with the code referring to it. References: http://marc.info/?l=linux-kernel&m=136919777305599&w=2 Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Reviewed-by: Tang Chen --- drivers/base/memory.c | 11 ++--------- include/linux/memory.h | 1 - 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c8f3b63fcacd..c7092bc3c01e 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -291,13 +291,7 @@ static int __memory_block_change_state(struct memory_block *mem, mem->state = MEM_GOING_OFFLINE; ret = memory_block_action(mem->start_section_nr, to_state, online_type); - if (ret) { - mem->state = from_state_req; - } else { - mem->state = to_state; - if (to_state == MEM_ONLINE) - mem->last_online = online_type; - } + mem->state = ret ? from_state_req : to_state; return ret; } @@ -310,7 +304,7 @@ static int memory_subsys_online(struct device *dev) ret = mem->state == MEM_ONLINE ? 0 : __memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE, - mem->last_online); + ONLINE_KEEP); mutex_unlock(&mem->state_mutex); return ret; @@ -618,7 +612,6 @@ static int init_memory_block(struct memory_block **memory, base_memory_block_id(scn_nr) * sections_per_block; mem->end_section_nr = mem->start_section_nr + sections_per_block - 1; mem->state = state; - mem->last_online = ONLINE_KEEP; mem->section_count++; mutex_init(&mem->state_mutex); start_pfn = section_nr_to_pfn(mem->start_section_nr); diff --git a/include/linux/memory.h b/include/linux/memory.h index 3d5346583022..85c31a8e2904 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -26,7 +26,6 @@ struct memory_block { unsigned long start_section_nr; unsigned long end_section_nr; unsigned long state; - int last_online; int section_count; /* -- cgit v1.2.3 From ea50be59345a2b714fd3ed43e1bba89906c177c3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2013 10:41:50 +0200 Subject: Driver core / MM: Drop offline_memory_block() Since offline_memory_block(mem) is functionally equivalent to device_offline(&mem->dev), make the only caller of the former use the latter instead and drop offline_memory_block() entirely. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Acked-by: Toshi Kani --- drivers/base/memory.c | 21 --------------------- include/linux/memory_hotplug.h | 1 - mm/memory_hotplug.c | 2 +- 3 files changed, 1 insertion(+), 23 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c7092bc3c01e..4ebf97f99fae 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -728,27 +728,6 @@ int unregister_memory_section(struct mem_section *section) } #endif /* CONFIG_MEMORY_HOTREMOVE */ -/* - * offline one memory block. If the memory block has been offlined, do nothing. - * - * Call under device_hotplug_lock. - */ -int offline_memory_block(struct memory_block *mem) -{ - int ret = 0; - - mutex_lock(&mem->state_mutex); - if (mem->state != MEM_OFFLINE) { - ret = __memory_block_change_state_uevent(mem, MEM_OFFLINE, - MEM_ONLINE, -1); - if (!ret) - mem->dev.offline = true; - } - mutex_unlock(&mem->state_mutex); - - return ret; -} - /* return true if the memory block is offlined, otherwise, return false */ bool is_memblock_offlined(struct memory_block *mem) { diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 2975b7b2a9d8..ae5480a00963 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -251,7 +251,6 @@ extern int mem_online_node(int nid); extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages); -extern int offline_memory_block(struct memory_block *mem); extern bool is_memblock_offlined(struct memory_block *mem); extern int remove_memory(int nid, u64 start, u64 size); extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 5ea1287ee91f..a39841d240e8 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1680,7 +1680,7 @@ int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn, static int offline_memory_block_cb(struct memory_block *mem, void *arg) { int *ret = arg; - int error = offline_memory_block(mem); + int error = device_offline(&mem->dev); if (error != 0 && *ret == 0) *ret = error; -- cgit v1.2.3 From 45f0a85c8258741d11bda25c0a5669c06267204a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 3 Jun 2013 21:49:52 +0200 Subject: PM / Runtime: Rework the "runtime idle" helper routine The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg Tested-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki Acked-by: Kevin Hilman Reviewed-by: Ulf Hansson Acked-by: Alan Stern --- Documentation/power/runtime_pm.txt | 5 ----- arch/arm/mach-omap2/omap_device.c | 7 +------ drivers/acpi/device_pm.c | 1 - drivers/amba/bus.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/base/platform.c | 1 - drivers/base/power/domain.c | 1 - drivers/base/power/generic_ops.c | 23 ----------------------- drivers/base/power/runtime.c | 12 +++++------- drivers/dma/intel_mid_dma.c | 2 +- drivers/gpio/gpio-langwell.c | 6 +----- drivers/i2c/i2c-core.c | 2 +- drivers/mfd/ab8500-gpadc.c | 8 +------- drivers/mmc/core/bus.c | 2 +- drivers/mmc/core/sdio_bus.c | 2 +- drivers/pci/pci-driver.c | 14 +++++--------- drivers/scsi/scsi_pm.c | 11 +++-------- drivers/sh/pm_runtime.c | 2 +- drivers/spi/spi.c | 2 +- drivers/tty/serial/mfd.c | 9 ++------- drivers/usb/core/driver.c | 3 ++- drivers/usb/core/port.c | 1 - include/linux/pm_runtime.h | 2 -- 23 files changed, 28 insertions(+), 92 deletions(-) (limited to 'drivers/base') diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 6c9f5d9aa115..6c470c71ba27 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -660,11 +660,6 @@ Subsystems may wish to conserve code space by using the set of generic power management callbacks provided by the PM core, defined in driver/base/power/generic_ops.c: - int pm_generic_runtime_idle(struct device *dev); - - invoke the ->runtime_idle() callback provided by the driver of this - device, if defined, and call pm_runtime_suspend() for this device if the - return value is 0 or the callback is not defined - int pm_generic_runtime_suspend(struct device *dev); - invoke the ->runtime_suspend() callback provided by the driver of this device and return its result, or return -EINVAL if not defined diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index e6d230700b2b..e37feb2f05a3 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -591,11 +591,6 @@ static int _od_runtime_suspend(struct device *dev) return ret; } -static int _od_runtime_idle(struct device *dev) -{ - return pm_generic_runtime_idle(dev); -} - static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -653,7 +648,7 @@ static int _od_resume_noirq(struct device *dev) struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, - _od_runtime_idle) + NULL) USE_PLATFORM_PM_SLEEP_OPS .suspend_noirq = _od_suspend_noirq, .resume_noirq = _od_resume_noirq, diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index bc493aa3af19..1eb8b6258786 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -886,7 +886,6 @@ static struct dev_pm_domain acpi_general_pm_domain = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = acpi_subsys_runtime_suspend, .runtime_resume = acpi_subsys_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif #ifdef CONFIG_PM_SLEEP .prepare = acpi_subsys_prepare, diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index cdbad3a454a0..c6707278a6bb 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -284,7 +284,7 @@ static const struct dev_pm_ops amba_pm = { SET_RUNTIME_PM_OPS( amba_pm_runtime_suspend, amba_pm_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743baf920..84e3b62aa368 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5430,7 +5430,7 @@ static int ata_port_runtime_idle(struct device *dev) return -EBUSY; } - return pm_runtime_suspend(dev); + return 0; } static int ata_port_runtime_suspend(struct device *dev) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9eda84246ffd..96a930387ebc 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -888,7 +888,6 @@ int platform_pm_restore(struct device *dev) static const struct dev_pm_ops platform_dev_pm_ops = { .runtime_suspend = pm_generic_runtime_suspend, .runtime_resume = pm_generic_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, USE_PLATFORM_PM_SLEEP_OPS }; diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 7072404c8b6d..bfb8955c406c 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2143,7 +2143,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd, genpd->max_off_time_changed = true; genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; - genpd->domain.ops.runtime_idle = pm_generic_runtime_idle; genpd->domain.ops.prepare = pm_genpd_prepare; genpd->domain.ops.suspend = pm_genpd_suspend; genpd->domain.ops.suspend_late = pm_genpd_suspend_late; diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c index bfd898b8988e..5ee030a864f9 100644 --- a/drivers/base/power/generic_ops.c +++ b/drivers/base/power/generic_ops.c @@ -11,29 +11,6 @@ #include #ifdef CONFIG_PM_RUNTIME -/** - * pm_generic_runtime_idle - Generic runtime idle callback for subsystems. - * @dev: Device to handle. - * - * If PM operations are defined for the @dev's driver and they include - * ->runtime_idle(), execute it and return its error code, if nonzero. - * Otherwise, execute pm_runtime_suspend() for the device and return 0. - */ -int pm_generic_runtime_idle(struct device *dev) -{ - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - - if (pm && pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } - - pm_runtime_suspend(dev); - return 0; -} -EXPORT_SYMBOL_GPL(pm_generic_runtime_idle); - /** * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems. * @dev: Device to suspend. diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index ef13ad08afb2..268a35097578 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -293,11 +293,8 @@ static int rpm_idle(struct device *dev, int rpmflags) /* Pending requests need to be canceled. */ dev->power.request = RPM_REQ_NONE; - if (dev->power.no_callbacks) { - /* Assume ->runtime_idle() callback would have suspended. */ - retval = rpm_suspend(dev, rpmflags); + if (dev->power.no_callbacks) goto out; - } /* Carry out an asynchronous or a synchronous idle notification. */ if (rpmflags & RPM_ASYNC) { @@ -306,7 +303,8 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.request_pending = true; queue_work(pm_wq, &dev->power.work); } - goto out; + trace_rpm_return_int(dev, _THIS_IP_, 0); + return 0; } dev->power.idle_notification = true; @@ -326,14 +324,14 @@ static int rpm_idle(struct device *dev, int rpmflags) callback = dev->driver->pm->runtime_idle; if (callback) - __rpm_callback(callback, dev); + retval = __rpm_callback(callback, dev); dev->power.idle_notification = false; wake_up_all(&dev->power.wait_queue); out: trace_rpm_return_int(dev, _THIS_IP_, retval); - return retval; + return retval ? retval : rpm_suspend(dev, rpmflags); } /** diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index a0de82e21a7c..a975ebebea8a 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1405,7 +1405,7 @@ static int dma_runtime_idle(struct device *dev) return -EAGAIN; } - return pm_schedule_suspend(dev, 0); + return 0; } /****************************************************************************** diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index 62ef10a641c4..89d0d2a3b1bb 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -305,11 +305,7 @@ static const struct irq_domain_ops lnw_gpio_irq_ops = { static int lnw_gpio_runtime_idle(struct device *dev) { - int err = pm_schedule_suspend(dev, 500); - - if (!err) - return 0; - + pm_schedule_suspend(dev, 500); return -EBUSY; } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 48e31ed69dbf..f32ca293ae0e 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -435,7 +435,7 @@ static const struct dev_pm_ops i2c_device_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 13f7866de46e..3598b0ecf8c7 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -886,12 +886,6 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) return ret; } -static int ab8500_gpadc_runtime_idle(struct device *dev) -{ - pm_runtime_suspend(dev); - return 0; -} - static int ab8500_gpadc_suspend(struct device *dev) { struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); @@ -1039,7 +1033,7 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) static const struct dev_pm_ops ab8500_gpadc_pm_ops = { SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, ab8500_gpadc_runtime_resume, - ab8500_gpadc_runtime_idle) + NULL) SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, ab8500_gpadc_resume) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index e219c97a02a4..9d5c71125576 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -164,7 +164,7 @@ static int mmc_runtime_resume(struct device *dev) static int mmc_runtime_idle(struct device *dev) { - return pm_runtime_suspend(dev); + return 0; } #endif /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 546c67c2bbbf..6d67492a9247 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -211,7 +211,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 79277fb36c6b..e6515e21afa3 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1050,26 +1050,22 @@ static int pci_pm_runtime_idle(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + int ret = 0; /* * If pci_dev->driver is not set (unbound), the device should * always remain in D0 regardless of the runtime PM status */ if (!pci_dev->driver) - goto out; + return 0; if (!pm) return -ENOSYS; - if (pm->runtime_idle) { - int ret = pm->runtime_idle(dev); - if (ret) - return ret; - } + if (pm->runtime_idle) + ret = pm->runtime_idle(dev); -out: - pm_runtime_suspend(dev); - return 0; + return ret; } #else /* !CONFIG_PM_RUNTIME */ diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 42539ee2cb11..4c5aabe21755 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -229,8 +229,6 @@ static int scsi_runtime_resume(struct device *dev) static int scsi_runtime_idle(struct device *dev) { - int err; - dev_dbg(dev, "scsi_runtime_idle\n"); /* Insert hooks here for targets, hosts, and transport classes */ @@ -240,14 +238,11 @@ static int scsi_runtime_idle(struct device *dev) if (sdev->request_queue->dev) { pm_runtime_mark_last_busy(dev); - err = pm_runtime_autosuspend(dev); - } else { - err = pm_runtime_suspend(dev); + pm_runtime_autosuspend(dev); + return -EBUSY; } - } else { - err = pm_runtime_suspend(dev); } - return err; + return 0; } int scsi_autopm_get_device(struct scsi_device *sdev) diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index afe9282629b9..8afa5a4589f2 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -25,7 +25,7 @@ static int default_platform_runtime_idle(struct device *dev) { /* suspend synchronously to disable clocks immediately */ - return pm_runtime_suspend(dev); + return 0; } static struct dev_pm_domain default_pm_domain = { diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 32b7bb111eb6..095cfaded1c0 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -223,7 +223,7 @@ static const struct dev_pm_ops spi_pm = { SET_RUNTIME_PM_OPS( pm_generic_runtime_suspend, pm_generic_runtime_resume, - pm_generic_runtime_idle + NULL ) }; diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 5f4765a7a5c5..5dfcf3bae23a 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1248,13 +1248,8 @@ static int serial_hsu_resume(struct pci_dev *pdev) #ifdef CONFIG_PM_RUNTIME static int serial_hsu_runtime_idle(struct device *dev) { - int err; - - err = pm_schedule_suspend(dev, 500); - if (err) - return -EBUSY; - - return 0; + pm_schedule_suspend(dev, 500); + return -EBUSY; } static int serial_hsu_runtime_suspend(struct device *dev) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 6eab440e1542..7609ac4aed1c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1765,7 +1765,8 @@ int usb_runtime_idle(struct device *dev) */ if (autosuspend_check(udev) == 0) pm_runtime_autosuspend(dev); - return 0; + /* Tell the core not to suspend it, though. */ + return -EBUSY; } int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index b8bad294eeb8..8c1b2c509467 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -141,7 +141,6 @@ static const struct dev_pm_ops usb_port_pm_ops = { #ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, - .runtime_idle = pm_generic_runtime_idle, #endif }; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 7d7e09efff9b..6fa7cea25da9 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -37,7 +37,6 @@ extern void pm_runtime_enable(struct device *dev); extern void __pm_runtime_disable(struct device *dev, bool check_resume); extern void pm_runtime_allow(struct device *dev); extern void pm_runtime_forbid(struct device *dev); -extern int pm_generic_runtime_idle(struct device *dev); extern int pm_generic_runtime_suspend(struct device *dev); extern int pm_generic_runtime_resume(struct device *dev); extern void pm_runtime_no_callbacks(struct device *dev); @@ -143,7 +142,6 @@ static inline bool pm_runtime_active(struct device *dev) { return true; } static inline bool pm_runtime_status_suspended(struct device *dev) { return false; } static inline bool pm_runtime_enabled(struct device *dev) { return false; } -static inline int pm_generic_runtime_idle(struct device *dev) { return 0; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } static inline int pm_generic_runtime_resume(struct device *dev) { return 0; } static inline void pm_runtime_no_callbacks(struct device *dev) {} -- cgit v1.2.3 From 5070158804b5339c71809f5e673cea1cfacd804d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 30 Mar 2013 16:25:15 +0530 Subject: cpufreq: rename index as driver_data in cpufreq_frequency_table The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar Acked-by: Simon Horman Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/cpu-drivers.txt | 10 +- arch/arm/mach-davinci/da850.c | 8 +- arch/arm/mach-s3c24xx/cpufreq-utils.c | 2 +- arch/arm/mach-s3c24xx/cpufreq.c | 4 +- arch/arm/mach-s3c24xx/pll-s3c2410.c | 54 +++++----- arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c | 54 +++++----- arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c | 110 ++++++++++----------- arch/arm/mach-shmobile/clock-sh7372.c | 6 +- arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 2 +- arch/mips/loongson/lemote-2f/clock.c | 3 +- arch/powerpc/platforms/pasemi/cpufreq.c | 5 +- drivers/base/power/opp.c | 4 +- drivers/cpufreq/acpi-cpufreq.c | 6 +- drivers/cpufreq/blackfin-cpufreq.c | 10 +- drivers/cpufreq/e_powersaver.c | 8 +- drivers/cpufreq/freq_table.c | 26 ++--- drivers/cpufreq/ia64-acpi-cpufreq.c | 2 +- drivers/cpufreq/kirkwood-cpufreq.c | 2 +- drivers/cpufreq/longhaul.c | 16 +-- drivers/cpufreq/loongson2_cpufreq.c | 2 +- drivers/cpufreq/p4-clockmod.c | 4 +- drivers/cpufreq/powernow-k6.c | 8 +- drivers/cpufreq/powernow-k7.c | 16 +-- drivers/cpufreq/powernow-k8.c | 18 ++-- drivers/cpufreq/ppc_cbe_cpufreq.c | 4 +- drivers/cpufreq/pxa2xx-cpufreq.c | 8 +- drivers/cpufreq/pxa3xx-cpufreq.c | 4 +- drivers/cpufreq/s3c2416-cpufreq.c | 2 +- drivers/cpufreq/s3c64xx-cpufreq.c | 2 +- drivers/cpufreq/sc520_freq.c | 2 +- drivers/cpufreq/sparc-us2e-cpufreq.c | 12 +-- drivers/cpufreq/sparc-us3-cpufreq.c | 8 +- drivers/cpufreq/spear-cpufreq.c | 4 +- drivers/cpufreq/speedstep-centrino.c | 8 +- drivers/mfd/db8500-prcmu.c | 10 +- drivers/sh/clk/core.c | 4 +- include/linux/cpufreq.h | 2 +- 37 files changed, 223 insertions(+), 227 deletions(-) (limited to 'drivers/base') diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index a3585eac83b6..19fa98e07bf7 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -186,7 +186,7 @@ As most cpufreq processors only allow for being set to a few specific frequencies, a "frequency table" with some functions might assist in some work of the processor driver. Such a "frequency table" consists of an array of struct cpufreq_frequency_table entries, with any value in -"index" you want to use, and the corresponding frequency in +"driver_data" you want to use, and the corresponding frequency in "frequency". At the end of the table, you need to add a cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And if you want to skip one entry in the table, set the frequency to @@ -214,10 +214,4 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, is the corresponding frequency table helper for the ->target stage. Just pass the values to this function, and the unsigned int index returns the number of the frequency table entry which contains -the frequency the CPU shall be set to. PLEASE NOTE: This is not the -"index" which is in this cpufreq_table_entry.index, but instead -cpufreq_table[index]. So, the new frequency is -cpufreq_table[index].frequency, and the value you stored into the -frequency table "index" field is -cpufreq_table[index].index. - +the frequency the CPU shall be set to. diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 4d6933848abf..a0d4f6038b60 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1004,7 +1004,7 @@ static const struct da850_opp da850_opp_96 = { #define OPP(freq) \ { \ - .index = (unsigned int) &da850_opp_##freq, \ + .driver_data = (unsigned int) &da850_opp_##freq, \ .frequency = freq * 1000, \ } @@ -1016,7 +1016,7 @@ static struct cpufreq_frequency_table da850_freq_table[] = { OPP(200), OPP(96), { - .index = 0, + .driver_data = 0, .frequency = CPUFREQ_TABLE_END, }, }; @@ -1044,7 +1044,7 @@ static int da850_set_voltage(unsigned int index) if (!cvdd) return -ENODEV; - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; + opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data; return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); } @@ -1125,7 +1125,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) struct pll_data *pll = clk->pll_data; int ret; - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; + opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data; prediv = opp->prediv; mult = opp->mult; postdiv = opp->postdiv; diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index ddd8280e3875..2a0aa5684e72 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -60,5 +60,5 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.index, S3C2410_MPLLCON); + __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); } diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 3c0e78ede0da..3513e7477160 100644 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -70,7 +70,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -431,7 +431,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); suspend_freq = s3c_cpufreq_get(0) * 1000; return 0; diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index dcf3420a3271..5e37d368594b 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -33,36 +33,36 @@ #include static struct cpufreq_frequency_table pll_vals_12MHz[] = { - { .frequency = 34000000, .index = PLLVAL(82, 2, 3), }, - { .frequency = 45000000, .index = PLLVAL(82, 1, 3), }, - { .frequency = 51000000, .index = PLLVAL(161, 3, 3), }, - { .frequency = 48000000, .index = PLLVAL(120, 2, 3), }, - { .frequency = 56000000, .index = PLLVAL(142, 2, 3), }, - { .frequency = 68000000, .index = PLLVAL(82, 2, 2), }, - { .frequency = 79000000, .index = PLLVAL(71, 1, 2), }, - { .frequency = 85000000, .index = PLLVAL(105, 2, 2), }, - { .frequency = 90000000, .index = PLLVAL(112, 2, 2), }, - { .frequency = 101000000, .index = PLLVAL(127, 2, 2), }, - { .frequency = 113000000, .index = PLLVAL(105, 1, 2), }, - { .frequency = 118000000, .index = PLLVAL(150, 2, 2), }, - { .frequency = 124000000, .index = PLLVAL(116, 1, 2), }, - { .frequency = 135000000, .index = PLLVAL(82, 2, 1), }, - { .frequency = 147000000, .index = PLLVAL(90, 2, 1), }, - { .frequency = 152000000, .index = PLLVAL(68, 1, 1), }, - { .frequency = 158000000, .index = PLLVAL(71, 1, 1), }, - { .frequency = 170000000, .index = PLLVAL(77, 1, 1), }, - { .frequency = 180000000, .index = PLLVAL(82, 1, 1), }, - { .frequency = 186000000, .index = PLLVAL(85, 1, 1), }, - { .frequency = 192000000, .index = PLLVAL(88, 1, 1), }, - { .frequency = 203000000, .index = PLLVAL(161, 3, 1), }, + { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, + { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, + { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, + { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, + { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, + { .frequency = 85000000, .driver_data = PLLVAL(105, 2, 2), }, + { .frequency = 90000000, .driver_data = PLLVAL(112, 2, 2), }, + { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2), }, + { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2), }, + { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2), }, + { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2), }, + { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1), }, + { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1), }, + { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1), }, + { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1), }, + { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1), }, + { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1), }, + { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1), }, + { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1), }, + { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1), }, /* 2410A extras */ - { .frequency = 210000000, .index = PLLVAL(132, 2, 1), }, - { .frequency = 226000000, .index = PLLVAL(105, 1, 1), }, - { .frequency = 266000000, .index = PLLVAL(125, 1, 1), }, - { .frequency = 268000000, .index = PLLVAL(126, 1, 1), }, - { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, + { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1), }, + { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1), }, + { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1), }, + { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1), }, + { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1), }, }; static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index 673781758319..a19460e6e7b0 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -21,33 +21,33 @@ #include static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { - { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ - { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ - { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ - { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ - { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ - { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ - { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ - { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ - { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ - { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ - { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ - { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ - { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ - { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ - { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ - { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ - { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ - { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ - { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ - { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ - { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ - { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ - { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ - { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ - { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ - { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ - { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ + { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ + { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ + { .frequency = 90000000, .driver_data = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */ + { .frequency = 100000000, .driver_data = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */ + { .frequency = 110000000, .driver_data = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */ + { .frequency = 120000000, .driver_data = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */ + { .frequency = 150000000, .driver_data = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */ + { .frequency = 160000000, .driver_data = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */ + { .frequency = 170000000, .driver_data = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */ + { .frequency = 180000000, .driver_data = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */ + { .frequency = 190000000, .driver_data = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */ + { .frequency = 200000000, .driver_data = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */ + { .frequency = 210000000, .driver_data = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */ + { .frequency = 220000000, .driver_data = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */ + { .frequency = 230000000, .driver_data = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */ + { .frequency = 240000000, .driver_data = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */ + { .frequency = 300000000, .driver_data = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */ + { .frequency = 310000000, .driver_data = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */ + { .frequency = 320000000, .driver_data = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */ + { .frequency = 330000000, .driver_data = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */ + { .frequency = 340000000, .driver_data = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */ + { .frequency = 350000000, .driver_data = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */ + { .frequency = 360000000, .driver_data = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */ + { .frequency = 370000000, .driver_data = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */ + { .frequency = 380000000, .driver_data = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */ + { .frequency = 390000000, .driver_data = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */ + { .frequency = 400000000, .driver_data = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */ }; static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index debfa106289b..1191b2905625 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -21,61 +21,61 @@ #include static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { - { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ - { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ - { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ - { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ - { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ - { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ - { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ - { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ - { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ - { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ - { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ - { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ - { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ - { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ - { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ - { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ - { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ - { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ - { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ - { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ - { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ - { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ - { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ - { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ - { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ - { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ - { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ - { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ - { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ - { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ - { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ - { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ - { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ - { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ - { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ - { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ - { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ - { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ - { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ - { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ - { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ - { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ - { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ - { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ - { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ - { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ - { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ - { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ - { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ - { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ - { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ - { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ - { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ - { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ - { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ + { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ + { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ + { .frequency = 90115200, .driver_data = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */ + { .frequency = 96163200, .driver_data = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */ + { .frequency = 102135600, .driver_data = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */ + { .frequency = 108259200, .driver_data = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */ + { .frequency = 114307200, .driver_data = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */ + { .frequency = 120234240, .driver_data = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */ + { .frequency = 126161280, .driver_data = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */ + { .frequency = 132088320, .driver_data = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */ + { .frequency = 138015360, .driver_data = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */ + { .frequency = 144789120, .driver_data = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */ + { .frequency = 150100363, .driver_data = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */ + { .frequency = 156038400, .driver_data = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */ + { .frequency = 162086400, .driver_data = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */ + { .frequency = 168134400, .driver_data = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */ + { .frequency = 174048000, .driver_data = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */ + { .frequency = 180230400, .driver_data = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */ + { .frequency = 186278400, .driver_data = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */ + { .frequency = 192326400, .driver_data = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */ + { .frequency = 198132480, .driver_data = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */ + { .frequency = 204271200, .driver_data = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */ + { .frequency = 210268800, .driver_data = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */ + { .frequency = 216518400, .driver_data = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */ + { .frequency = 222264000, .driver_data = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */ + { .frequency = 228614400, .driver_data = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */ + { .frequency = 234259200, .driver_data = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */ + { .frequency = 240468480, .driver_data = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */ + { .frequency = 246960000, .driver_data = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */ + { .frequency = 252322560, .driver_data = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */ + { .frequency = 258249600, .driver_data = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */ + { .frequency = 264176640, .driver_data = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */ + { .frequency = 270950400, .driver_data = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */ + { .frequency = 276030720, .driver_data = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */ + { .frequency = 282240000, .driver_data = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */ + { .frequency = 289578240, .driver_data = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */ + { .frequency = 294235200, .driver_data = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */ + { .frequency = 300200727, .driver_data = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */ + { .frequency = 306358690, .driver_data = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */ + { .frequency = 312076800, .driver_data = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */ + { .frequency = 318366720, .driver_data = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */ + { .frequency = 324172800, .driver_data = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */ + { .frequency = 330220800, .driver_data = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */ + { .frequency = 336268800, .driver_data = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */ + { .frequency = 342074880, .driver_data = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */ + { .frequency = 348096000, .driver_data = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */ + { .frequency = 355622400, .driver_data = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */ + { .frequency = 360460800, .driver_data = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */ + { .frequency = 366206400, .driver_data = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */ + { .frequency = 372556800, .driver_data = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */ + { .frequency = 378201600, .driver_data = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */ + { .frequency = 384652800, .driver_data = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */ + { .frequency = 391608000, .driver_data = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */ + { .frequency = 396264960, .driver_data = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */ + { .frequency = 402192000, .driver_data = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */ }; static int s3c2440_plls169344_add(struct device *dev, diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 7e105932c09d..5390c6bbbc02 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -142,15 +142,15 @@ static void pllc2_table_rebuild(struct clk *clk) /* Initialise PLLC2 frequency table */ for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) { pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; } /* This is a special entry - switching PLL off makes it a repeater */ pllc2_freq_table[i].frequency = clk->parent->rate; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END; - pllc2_freq_table[i].index = i; + pllc2_freq_table[i].driver_data = i; } static unsigned long pllc2_recalc(struct clk *clk) diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 95509d8eb140..a8a760ddfae1 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -285,7 +285,7 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, s3c_freq_dbg("%s: { %d = %u kHz }\n", __func__, index, freq); - table[index].index = index; + table[index].driver_data = index; table[index].frequency = freq; } diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c index bc739d4bab2e..4dc2f5fa3f67 100644 --- a/arch/mips/loongson/lemote-2f/clock.c +++ b/arch/mips/loongson/lemote-2f/clock.c @@ -121,7 +121,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk->rate = rate; regval = LOONGSON_CHIPCFG0; - regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); + regval = (regval & ~0x7) | + (loongson2_clockmod_table[i].driver_data - 1); LOONGSON_CHIPCFG0 = regval; return ret; diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index be1e7958909e..b704da404067 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -204,7 +204,8 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000; + pas_freqs[i].frequency = + get_astate_freq(pas_freqs[i].driver_data) * 100000; pr_debug("%d: %d\n", i, pas_freqs[i].frequency); } @@ -280,7 +281,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy, pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", policy->cpu, pas_freqs[pas_astate_new].frequency, - pas_freqs[pas_astate_new].index); + pas_freqs[pas_astate_new].driver_data); current_astate = pas_astate_new; diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index f0077cb8e249..c8ec186303db 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -648,14 +648,14 @@ int opp_init_cpufreq_table(struct device *dev, list_for_each_entry(opp, &dev_opp->opp_list, node) { if (opp->available) { - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = opp->rate / 1000; i++; } } mutex_unlock(&dev_opp_list_lock); - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; *table = &freq_table[0]; diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 8c02622b35a4..0d25677fb37d 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) perf = data->acpi_data; for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) + if (msr == perf->states[data->freq_table[i].driver_data].status) return data->freq_table[i].frequency; } return data->freq_table[0].frequency; @@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, goto out; } - next_perf_state = data->freq_table[next_state].index; + next_perf_state = data->freq_table[next_state].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -811,7 +811,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->freq_table[valid_states-1].frequency / 1000) continue; - data->freq_table[valid_states].index = i; + data->freq_table[valid_states].driver_data = i; data->freq_table[valid_states].frequency = perf->states[i].core_frequency * 1000; valid_states++; diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index 995511e80bef..9cdbbd278a80 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -20,23 +20,23 @@ /* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ +/* .driver_data is the entry in the auxiliary dpm_state_table[] */ static struct cpufreq_frequency_table bfin_freq_table[] = { { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, { .frequency = CPUFREQ_TABLE_END, - .index = 1, + .driver_data = 1, }, { .frequency = CPUFREQ_TABLE_END, - .index = 2, + .driver_data = 2, }, { .frequency = CPUFREQ_TABLE_END, - .index = 0, + .driver_data = 0, }, }; diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 37380fb92621..324aff20aeef 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -188,7 +188,7 @@ static int eps_target(struct cpufreq_policy *policy, } /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; + dest_state = centaur->freq_table[newstate].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) printk(KERN_ERR "eps: Timeout!\n"); @@ -380,9 +380,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) f_table = ¢aur->freq_table[0]; if (brand != EPS_BRAND_C7M) { f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; f_table[2].frequency = CPUFREQ_TABLE_END; } else { k = 0; @@ -391,7 +391,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) for (i = min_multiplier; i <= max_multiplier; i++) { voltage = (k * step) / 256 + min_voltage; f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; + f_table[k].driver_data = (i << 8) | voltage; k++; } f_table[k].frequency = CPUFREQ_TABLE_END; diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index d7a79662e24c..f0d87412cc91 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, continue; } - pr_debug("table entry %u: %u kHz, %u index\n", - i, freq, table[i].index); + pr_debug("table entry %u: %u kHz, %u driver_data\n", + i, freq, table[i].driver_data); if (freq < min_freq) min_freq = freq; if (freq > max_freq) @@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, unsigned int *index) { struct cpufreq_frequency_table optimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; struct cpufreq_frequency_table suboptimal = { - .index = ~0, + .driver_data = ~0, .frequency = 0, }; unsigned int i; @@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq <= target_freq) { if (freq >= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq <= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; @@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, if (freq >= target_freq) { if (freq <= optimal.frequency) { optimal.frequency = freq; - optimal.index = i; + optimal.driver_data = i; } } else { if (freq >= suboptimal.frequency) { suboptimal.frequency = freq; - suboptimal.index = i; + suboptimal.driver_data = i; } } break; } } - if (optimal.index > i) { - if (suboptimal.index > i) + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) return -EINVAL; - *index = suboptimal.index; + *index = suboptimal.driver_data; } else - *index = optimal.index; + *index = optimal.driver_data; pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency, - table[*index].index); + table[*index].driver_data); return 0; } diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index c0075dbaa633..573c14ea802d 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init ( /* table init */ for (i = 0; i <= data->acpi_data.state_count; i++) { - data->freq_table[i].index = i; + data->freq_table[i].driver_data = i; if (i < data->acpi_data.state_count) { data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index b2644af985ec..c233ea617366 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - unsigned int state = kirkwood_freq_table[index].index; + unsigned int state = kirkwood_freq_table[index].driver_data; unsigned long reg; freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index b448638e34de..b6a0a7a406b0 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy *policy, u32 bm_timeout = 1000; unsigned int dir = 0; - mults_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].driver_data; /* Safety precautions */ mult = mults[mults_index & 0x1f]; if (mult == -1) @@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void) if (ratio > maxmult || ratio < minmult) continue; longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; + longhaul_table[k].driver_data = j; k++; } if (k <= 1) { @@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void) if (min_i != j) { swap(longhaul_table[j].frequency, longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); } } @@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { longhaul_index = j; break; } @@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; + longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); @@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; if (vid != current_vid) { longhaul_setstate(policy, i); current_vid = vid; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index d53912768946..bb838b985077 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -72,7 +72,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, freq = ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].index) / 8; + loongson2_clockmod_table[newstate].driver_data) / 8; if (freq < policy->min || freq > policy->max) return -EINVAL; diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 421ef37d0bb3..9ee78170ff86 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; + freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; if (freqs.new == freqs.old) return 0; @@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); + cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index ea0222a45b7b..ea8e10382ec5 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - return clock_ratio[(invalue >> 5)&7].index; + return clock_ratio[(invalue >> 5)&7].driver_data; } @@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, unsigned long msrval; struct cpufreq_freqs freqs; - if (clock_ratio[best_i].index > max_multiplier) { + if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); return; } freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; + freqs.new = busfreq * clock_ratio[best_i].driver_data; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; + f = clock_ratio[i].driver_data; if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index 53888dacbe58..b9f80b713fda 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst) fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ + powernow_table[j].driver_data = fid; /* lower 8 bits */ speed = powernow_table[j].frequency; @@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst) maximum_speed = speed; vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, @@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst) mobile_vid_table[vid]%1000); } powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; + powernow_table[number_scales].driver_data = 0; return 0; } @@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index) * vid are the upper 8 bits. */ - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; @@ -373,8 +373,8 @@ static int powernow_acpi_init(void) fid = pc.bits.fid; powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ speed = powernow_table[i].frequency; speed_mhz = speed / 1000; @@ -417,7 +417,7 @@ static int powernow_acpi_init(void) } powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; + powernow_table[i].driver_data = 0; /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index b828efe4b2f8..51343a128703 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data) CPUFREQ_ENTRY_INVALID) { printk(KERN_INFO PFX "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, + data->powernow_table[j].driver_data & 0xff, data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); + data->powernow_table[j].driver_data >> 8); } } if (data->batps) @@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data *data, for (j = 0; j < data->numps; j++) { int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ freq = find_khz_freq_from_fid(pst[j].fid); powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; + powernow_table[data->numps].driver_data = 0; if (query_current_values_with_pending_wait(data)) { kfree(powernow_table); @@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; + powernow_table[data->acpi_data.state_count].driver_data = 0; data->powernow_table = powernow_table; if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) @@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); index = fid | (vid<<8); - powernow_table[i].index = index; + powernow_table[i].driver_data = index; freq = find_khz_freq_from_fid(fid); powernow_table[i].frequency = freq; @@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, * the cpufreq frequency table in find_psb_table, vid * are the upper 8 bits. */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index e577a1dbbfcd..5936f8d6f2cc 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -106,7 +106,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) /* initialize frequency table */ for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data; pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); } @@ -165,7 +165,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, "1/%d of max frequency\n", policy->cpu, cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); + cbe_freqs[cbe_pmode_new].driver_data); rc = set_pmode(policy->cpu, cbe_pmode_new); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 9e5bc8e388a0..fb3981ac829f 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -420,7 +420,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) /* Generate pxa25x the run cpufreq_frequency_table struct */ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; + pxa255_run_freq_table[i].driver_data = i; } pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -428,7 +428,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; + pxa255_turbo_freq_table[i].driver_data = i; } pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; @@ -440,9 +440,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) if (freq > pxa27x_maxfreq) break; pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; } - pxa27x_freq_table[i].index = i; + pxa27x_freq_table[i].driver_data = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index 15d60f857ad5..9c92ef032a9e 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy *policy, return -ENOMEM; for (i = 0; i < num; i++) { - table[i].index = i; + table[i].driver_data = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].index = i; + table[num].driver_data = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 4f1881eee3f1..69f2e55828dc 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) goto out; - idx = s3c_freq->freq_table[i].index; + idx = s3c_freq->freq_table[i].driver_data; if (idx == SOURCE_HCLK) to_dvs = 1; diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 27cacb524796..306d395de990 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, freqs.old = clk_get_rate(armclk) / 1000; freqs.new = s3c64xx_freq_table[i].frequency; freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data]; if (freqs.old == freqs.new) return 0; diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index f740b134d27b..77a210975fc4 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_disable(); clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; local_irq_enable(); diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c index 306ae462bba6..93061a408773 100644 --- a/drivers/cpufreq/sparc-us2e-cpufreq.c +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us2e_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 4; - table[2].index = 3; + table[2].driver_data = 3; table[2].frequency = clock_tick / 6; - table[2].index = 4; + table[2].driver_data = 4; table[2].frequency = clock_tick / 8; - table[2].index = 5; + table[2].driver_data = 5; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c index c71ee142347a..880ee293d61e 100644 --- a/drivers/cpufreq/sparc-us3-cpufreq.c +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) struct cpufreq_frequency_table *table = &us3_freq_table[cpu].table[0]; - table[0].index = 0; + table[0].driver_data = 0; table[0].frequency = clock_tick / 1; - table[1].index = 1; + table[1].driver_data = 1; table[1].frequency = clock_tick / 2; - table[2].index = 2; + table[2].driver_data = 2; table[2].frequency = clock_tick / 32; - table[3].index = 0; + table[3].driver_data = 0; table[3].frequency = CPUFREQ_TABLE_END; policy->cpuinfo.transition_latency = 0; diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 156829f4576d..c3efa7f2a908 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void) } for (i = 0; i < cnt; i++) { - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = be32_to_cpup(val++); } - freq_tbl[i].index = i; + freq_tbl[i].driver_data = i; freq_tbl[i].frequency = CPUFREQ_TABLE_END; spear_cpufreq.freq_tbl = freq_tbl; diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 618e6f417b1c..0915e712fbdc 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver; /* Computes the correct form for IA32_PERF_CTL MSR for a particular frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ + This is stored as "driver_data" in the structure. */ #define OP(mhz, mv) \ { \ .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ } /* @@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) per_cpu(centrino_model, cpu)->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) return per_cpu(centrino_model, cpu)-> op_points[i].frequency; } @@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; + msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 66f80973596b..ed79d7b78e7d 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1724,9 +1724,9 @@ static long round_clock_rate(u8 clock, unsigned long rate) /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .index = ARM_EXTCLK,}, - { .frequency = 400000, .index = ARM_50_OPP,}, - { .frequency = 800000, .index = ARM_100_OPP,}, + { .frequency = 200000, .driver_data = ARM_EXTCLK,}, + { .frequency = 400000, .driver_data = ARM_50_OPP,}, + { .frequency = 800000, .driver_data = ARM_100_OPP,}, { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ { .frequency = CPUFREQ_TABLE_END,}, }; @@ -1901,7 +1901,7 @@ static int set_armss_rate(unsigned long rate) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); + return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data); } static int set_plldsi_rate(unsigned long rate) @@ -3105,7 +3105,7 @@ static void db8500_prcmu_update_cpufreq(void) { if (prcmu_has_arm_maxopp()) { db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].index = ARM_MAX_OPP; + db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; } } diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index 7715de2629c1..74727851820d 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk, else freq = clk->parent->rate * mult / div; - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = freq; } /* Termination entry */ - freq_table[i].index = i; + freq_table[i].driver_data = i; freq_table[i].frequency = CPUFREQ_TABLE_END; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 1b5b5efa3e3a..d93905633dc7 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -410,7 +410,7 @@ extern struct cpufreq_governor cpufreq_gov_conservative; #define CPUFREQ_TABLE_END ~1 struct cpufreq_frequency_table { - unsigned int index; /* any */ + unsigned int driver_data; /* driver specific data, not used by core */ unsigned int frequency; /* kHz - doesn't need to be in ascending * order */ }; -- cgit v1.2.3 From 703e60655ca520c5380d8c83a9db0d5e9b906856 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Sat, 1 Jun 2013 05:53:10 -0300 Subject: [media] dma-buf: Cocci spatch "ptr_ret.spatch" Signed-off-by: Thomas Meyer Signed-off-by: Mauro Carvalho Chehab --- drivers/base/dma-buf.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index 08fe897c0b4c..6687ba741879 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -680,10 +680,7 @@ int dma_buf_debugfs_create_file(const char *name, d = debugfs_create_file(name, S_IRUGO, dma_buf_debugfs_dir, write, &dma_buf_debug_fops); - if (IS_ERR(d)) - return PTR_ERR(d); - - return 0; + return PTR_RET(d); } #else static inline int dma_buf_init_debugfs(void) -- cgit v1.2.3 From 9350de06be45a5a8b927ac6577c9d35de61c90ca Mon Sep 17 00:00:00 2001 From: Bernie Thompson Date: Sat, 1 Jun 2013 00:47:43 +0000 Subject: PM / wakeup: Adjust messaging for wake events during suspend This adds in a new message to the wakeup code which adds an indication to the log that suspend was cancelled due to a wake event occouring during the suspend sequence. It also adjusts the message printed in suspend.c to reflect the potential that a suspend was aborted, as opposed to a device failing to suspend. Without these message adjustments one can end up with a kernel log that says that a device failed to suspend with no actual device suspend failures, which can be confusing to the log examiner. Signed-off-by: Bernie Thompson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/wakeup.c | 4 +++- kernel/power/suspend.c | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 79715e7fa43e..407a2efa10bb 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -707,8 +707,10 @@ bool pm_wakeup_pending(void) } spin_unlock_irqrestore(&events_lock, flags); - if (ret) + if (ret) { + pr_info("PM: Wakeup pending, aborting suspend\n"); print_active_wakeup_sources(); + } return ret; } diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index bef86d121eb2..ece04223bb1e 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -269,7 +269,7 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_test_start(); error = dpm_suspend_start(PMSG_SUSPEND); if (error) { - printk(KERN_ERR "PM: Some devices failed to suspend\n"); + pr_err("PM: Some devices failed to suspend, or early wake event detected\n"); goto Recover_platform; } suspend_test_finish("suspend devices"); -- cgit v1.2.3 From 10dbc5e39a60944536f3ca59bc9a8a8896355714 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 21 Apr 2013 16:38:31 -0500 Subject: driver core: move to_platform_driver to platform_device.h In converting the last remaining of_platform_driver (ibmebus) to a regular platform driver, to_platform_driver is needed to replace to_of_platform_driver. Signed-off-by: Rob Herring Acked-by: Arnd Bergmann Tested-by: Benjamin Herrenschmidt Signed-off-by: Grant Likely --- drivers/base/platform.c | 3 --- include/linux/platform_device.h | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9eda84246ffd..1bcb2a792e95 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -29,9 +29,6 @@ /* For automatically allocated device IDs */ static DEFINE_IDA(platform_devid_ida); -#define to_platform_driver(drv) (container_of((drv), struct platform_driver, \ - driver)) - struct device platform_bus = { .init_name = "platform", }; diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 9abf1db6aea6..3413897474e1 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -180,6 +180,9 @@ struct platform_driver { const struct platform_device_id *id_table; }; +#define to_platform_driver(drv) (container_of((drv), struct platform_driver, \ + driver)) + extern int platform_driver_register(struct platform_driver *); extern void platform_driver_unregister(struct platform_driver *); -- cgit v1.2.3 From bb177fedd348c92c2bea6adc9a2163ebff15272e Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Wed, 12 Jun 2013 12:55:22 -0700 Subject: PM / Sleep: Print last wakeup source on failed wakeup_count write Commit a938da06 introduced a useful little log message to tell users/debuggers which wakeup source aborted a suspend. However, this message is only printed if the abort happens during the in-kernel suspend path (after writing /sys/power/state). The full specification of the /sys/power/wakeup_count facility allows user-space power managers to double-check if wakeups have already happened before it actually tries to suspend (e.g. while it was running user-space pre-suspend hooks), by writing the last known wakeup_count value to /sys/power/wakeup_count. This patch changes the sysfs handler for that node to also print said log message if that write fails, so that we can figure out the offending wakeup source for both kinds of suspend aborts. Signed-off-by: Julius Werner Signed-off-by: Rafael J. Wysocki --- drivers/base/power/wakeup.c | 5 +++-- include/linux/suspend.h | 1 + kernel/power/main.c | 2 ++ 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 407a2efa10bb..2d56f4113ae7 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -659,7 +659,7 @@ void pm_wakeup_event(struct device *dev, unsigned int msec) } EXPORT_SYMBOL_GPL(pm_wakeup_event); -static void print_active_wakeup_sources(void) +void pm_print_active_wakeup_sources(void) { struct wakeup_source *ws; int active = 0; @@ -683,6 +683,7 @@ static void print_active_wakeup_sources(void) last_activity_ws->name); rcu_read_unlock(); } +EXPORT_SYMBOL_GPL(pm_print_active_wakeup_sources); /** * pm_wakeup_pending - Check if power transition in progress should be aborted. @@ -709,7 +710,7 @@ bool pm_wakeup_pending(void) if (ret) { pr_info("PM: Wakeup pending, aborting suspend\n"); - print_active_wakeup_sources(); + pm_print_active_wakeup_sources(); } return ret; diff --git a/include/linux/suspend.h b/include/linux/suspend.h index d4e3f16d5e89..f73cabf59012 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -363,6 +363,7 @@ extern bool pm_wakeup_pending(void); extern bool pm_get_wakeup_count(unsigned int *count, bool block); extern bool pm_save_wakeup_count(unsigned int count); extern void pm_wakep_autosleep_enabled(bool set); +extern void pm_print_active_wakeup_sources(void); static inline void lock_system_sleep(void) { diff --git a/kernel/power/main.c b/kernel/power/main.c index d77663bfedeb..0828070d38b4 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -424,6 +424,8 @@ static ssize_t wakeup_count_store(struct kobject *kobj, if (sscanf(buf, "%u", &val) == 1) { if (pm_save_wakeup_count(val)) error = n; + else + pm_print_active_wakeup_sources(); } out: -- cgit v1.2.3 From 96d9d0b5dc17e80cefbd7c5be15a5072d33513f8 Mon Sep 17 00:00:00 2001 From: Sahara Date: Fri, 21 Jun 2013 11:12:30 +0900 Subject: PM / QoS: Add dev_pm_qos_request tracepoints Adds tracepoints to dev_pm_qos_add_request, dev_pm_qos_update_request, and dev_pm_qos_remove_request. It's useful for checking device name, dev_pm_qos_request_type, and value. Signed-off-by: Sahara Signed-off-by: Rafael J. Wysocki --- drivers/base/power/qos.c | 6 ++++++ include/trace/events/power.h | 51 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) (limited to 'drivers/base') diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 71671c42ef45..5c1361a9e5dd 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "power.h" @@ -305,6 +306,7 @@ int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, else if (!dev->power.qos) ret = dev_pm_qos_constraints_allocate(dev); + trace_dev_pm_qos_add_request(dev_name(dev), type, value); if (!ret) { req->dev = dev; req->type = type; @@ -349,6 +351,8 @@ static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req, return -EINVAL; } + trace_dev_pm_qos_update_request(dev_name(req->dev), req->type, + new_value); if (curr_value != new_value) ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value); @@ -398,6 +402,8 @@ static int __dev_pm_qos_remove_request(struct dev_pm_qos_request *req) if (IS_ERR_OR_NULL(req->dev->power.qos)) return -ENODEV; + trace_dev_pm_qos_remove_request(dev_name(req->dev), req->type, + PM_QOS_DEFAULT_VALUE); ret = apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE); memset(req, 0, sizeof(*req)); return ret; diff --git a/include/trace/events/power.h b/include/trace/events/power.h index 6411f924afb1..8e42410bd159 100644 --- a/include/trace/events/power.h +++ b/include/trace/events/power.h @@ -299,6 +299,57 @@ DEFINE_EVENT_PRINT(pm_qos_update, pm_qos_update_flags, { PM_QOS_REMOVE_REQ, "REMOVE_REQ" }), __entry->prev_value, __entry->curr_value) ); + +DECLARE_EVENT_CLASS(dev_pm_qos_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value), + + TP_STRUCT__entry( + __string( name, name ) + __field( enum dev_pm_qos_req_type, type ) + __field( s32, new_value ) + ), + + TP_fast_assign( + __assign_str(name, name); + __entry->type = type; + __entry->new_value = new_value; + ), + + TP_printk("device=%s type=%s new_value=%d", + __get_str(name), + __print_symbolic(__entry->type, + { DEV_PM_QOS_LATENCY, "DEV_PM_QOS_LATENCY" }, + { DEV_PM_QOS_FLAGS, "DEV_PM_QOS_FLAGS" }), + __entry->new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_add_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_update_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); + +DEFINE_EVENT(dev_pm_qos_request, dev_pm_qos_remove_request, + + TP_PROTO(const char *name, enum dev_pm_qos_req_type type, + s32 new_value), + + TP_ARGS(name, type, new_value) +); #endif /* _TRACE_POWER_H */ /* This part must be outside protection */ -- cgit v1.2.3 From 786d7257e537da0674c02e16e3b30a44665d1cee Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 27 Jun 2013 13:48:16 +0200 Subject: reservation: cross-device reservation support, v4 This adds support for a generic reservations framework that can be hooked up to ttm and dma-buf and allows easy sharing of reservations across devices. The idea is that a dma-buf and ttm object both will get a pointer to a struct reservation_object, which has to be reserved before anything is done with the contents of the dma-buf. Changes since v1: - Fix locking issue in ticket_reserve, which could cause mutex_unlock to be called too many times. Changes since v2: - All fence related calls and members have been taken out for now, what's left is the bare minimum to be useful for ttm locking conversion. Changes since v3: - Removed helper functions too. The documentation has an example implementation for locking. With the move to ww_mutex there is no need to have much logic any more. Signed-off-by: Maarten Lankhorst Reviewed-by: Jerome Glisse Signed-off-by: Dave Airlie --- Documentation/DocBook/device-drivers.tmpl | 2 + drivers/base/Makefile | 2 +- drivers/base/reservation.c | 39 +++++++++++++++++++ include/linux/reservation.h | 62 +++++++++++++++++++++++++++++++ 4 files changed, 104 insertions(+), 1 deletion(-) create mode 100644 drivers/base/reservation.c create mode 100644 include/linux/reservation.h (limited to 'drivers/base') diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index c36892c072da..f0648a8b09b6 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -126,6 +126,8 @@ X!Edrivers/base/interface.c Device Drivers DMA Management !Edrivers/base/dma-buf.c +!Edrivers/base/reservation.c +!Iinclude/linux/reservation.h !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 4e22ce3ed73d..48029aa477d9 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_CMA) += dma-contiguous.o obj-y += power/ obj-$(CONFIG_HAS_DMA) += dma-mapping.o obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o +obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o reservation.o obj-$(CONFIG_ISA) += isa.o obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o diff --git a/drivers/base/reservation.c b/drivers/base/reservation.c new file mode 100644 index 000000000000..a73fbf3b8e56 --- /dev/null +++ b/drivers/base/reservation.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2013 Canonical Ltd + * + * Based on bo.c which bears the following copyright notice, + * but is dual licensed: + * + * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + **************************************************************************/ +/* + * Authors: Thomas Hellstrom + */ + +#include +#include + +DEFINE_WW_CLASS(reservation_ww_class); +EXPORT_SYMBOL(reservation_ww_class); diff --git a/include/linux/reservation.h b/include/linux/reservation.h new file mode 100644 index 000000000000..e9ee806a9d72 --- /dev/null +++ b/include/linux/reservation.h @@ -0,0 +1,62 @@ +/* + * Header file for reservations for dma-buf and ttm + * + * Copyright(C) 2011 Linaro Limited. All rights reserved. + * Copyright (C) 2012-2013 Canonical Ltd + * Copyright (C) 2012 Texas Instruments + * + * Authors: + * Rob Clark + * Maarten Lankhorst + * Thomas Hellstrom + * + * Based on bo.c which bears the following copyright notice, + * but is dual licensed: + * + * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + */ +#ifndef _LINUX_RESERVATION_H +#define _LINUX_RESERVATION_H + +#include + +extern struct ww_class reservation_ww_class; + +struct reservation_object { + struct ww_mutex lock; +}; + +static inline void +reservation_object_init(struct reservation_object *obj) +{ + ww_mutex_init(&obj->lock, &reservation_ww_class); +} + +static inline void +reservation_object_fini(struct reservation_object *obj) +{ + ww_mutex_destroy(&obj->lock); +} + +#endif /* _LINUX_RESERVATION_H */ -- cgit v1.2.3 From 02aa2a37636c8fa4fb9322d91be46ff8225b7de0 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 3 Jul 2013 15:04:56 -0700 Subject: drivers: avoid format string in dev_set_name Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/attribute_container.c | 2 +- drivers/devfreq/devfreq.c | 2 +- drivers/extcon/extcon-class.c | 2 +- drivers/hsi/hsi.c | 2 +- drivers/ide/ide-cd.c | 2 +- drivers/ide/ide-gd.c | 2 +- drivers/ide/ide-probe.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- drivers/infiniband/core/sysfs.c | 2 +- drivers/infiniband/hw/qib/qib_file_ops.c | 2 +- drivers/isdn/mISDN/dsp_pipeline.c | 2 +- drivers/mtd/mtdcore.c | 2 +- drivers/platform/x86/wmi.c | 2 +- drivers/scsi/sd.c | 2 +- drivers/staging/android/timed_output.c | 2 +- drivers/staging/dgrp/dgrp_sysfs.c | 2 +- drivers/uwb/lc-dev.c | 2 +- drivers/video/backlight/backlight.c | 2 +- drivers/video/backlight/lcd.c | 2 +- drivers/video/output.c | 2 +- drivers/xen/xenbus/xenbus_probe.c | 2 +- mm/backing-dev.c | 5 ++--- sound/sound_core.c | 2 +- 23 files changed, 25 insertions(+), 26 deletions(-) (limited to 'drivers/base') diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index d78b204e65c1..ecc1929d7f6a 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -167,7 +167,7 @@ attribute_container_add_device(struct device *dev, ic->classdev.parent = get_device(dev); ic->classdev.class = cont->class; cont->class->dev_release = attribute_container_release; - dev_set_name(&ic->classdev, dev_name(dev)); + dev_set_name(&ic->classdev, "%s", dev_name(dev)); if (fn) fn(cont, dev, &ic->classdev); else diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 3b367973a802..af8372feb587 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -477,7 +477,7 @@ struct devfreq *devfreq_add_device(struct device *dev, GFP_KERNEL); devfreq->last_stat_updated = jiffies; - dev_set_name(&devfreq->dev, dev_name(dev)); + dev_set_name(&devfreq->dev, "%s", dev_name(dev)); err = device_register(&devfreq->dev); if (err) { put_device(&devfreq->dev); diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 8c69803558fe..18ccadef43fd 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -602,7 +602,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) edev->dev->class = extcon_class; edev->dev->release = extcon_dev_release; - dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev)); + dev_set_name(edev->dev, "%s", edev->name ? edev->name : dev_name(dev)); if (edev->max_supported) { char buf[10]; diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 833dd1afbf46..66d44581e1b1 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -75,7 +75,7 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.bus = &hsi_bus_type; cl->device.parent = &port->device; cl->device.release = hsi_client_release; - dev_set_name(&cl->device, info->name); + dev_set_name(&cl->device, "%s", info->name); cl->device.platform_data = info->platform_data; if (info->archdata) cl->device.archdata = *info->archdata; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2ff620444930..0b510bafd90e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1756,7 +1756,7 @@ static int ide_cd_probe(ide_drive_t *drive) info->dev.parent = &drive->gendev; info->dev.release = ide_cd_release; - dev_set_name(&info->dev, dev_name(&drive->gendev)); + dev_set_name(&info->dev, "%s", dev_name(&drive->gendev)); if (device_register(&info->dev)) goto out_free_disk; diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index de86631e767d..838996a0039e 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -392,7 +392,7 @@ static int ide_gd_probe(ide_drive_t *drive) idkp->dev.parent = &drive->gendev; idkp->dev.release = ide_disk_release; - dev_set_name(&idkp->dev, dev_name(&drive->gendev)); + dev_set_name(&idkp->dev, "%s", dev_name(&drive->gendev)); if (device_register(&idkp->dev)) goto out_free_disk; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 068cef0a987a..2a744a91370e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -545,7 +545,7 @@ static int ide_register_port(ide_hwif_t *hwif) int ret; /* register with global device tree */ - dev_set_name(&hwif->gendev, hwif->name); + dev_set_name(&hwif->gendev, "%s", hwif->name); dev_set_drvdata(&hwif->gendev, hwif); if (hwif->gendev.parent == NULL) hwif->gendev.parent = hwif->dev; @@ -559,7 +559,7 @@ static int ide_register_port(ide_hwif_t *hwif) } hwif->portdev = device_create(ide_port_class, &hwif->gendev, - MKDEV(0, 0), hwif, hwif->name); + MKDEV(0, 0), hwif, "%s", hwif->name); if (IS_ERR(hwif->portdev)) { ret = PTR_ERR(hwif->portdev); device_unregister(&hwif->gendev); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index c6c574bd5f59..1793aea4a7d2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1985,7 +1985,7 @@ static int ide_tape_probe(ide_drive_t *drive) tape->dev.parent = &drive->gendev; tape->dev.release = ide_tape_release; - dev_set_name(&tape->dev, dev_name(&drive->gendev)); + dev_set_name(&tape->dev, "%s", dev_name(&drive->gendev)); if (device_register(&tape->dev)) goto out_free_disk; diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 246fdc151652..99904f7d59e3 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -813,7 +813,7 @@ int ib_device_register_sysfs(struct ib_device *device, class_dev->class = &ib_class; class_dev->parent = device->dma_device; - dev_set_name(class_dev, device->name); + dev_set_name(class_dev, "%s", device->name); dev_set_drvdata(class_dev, device); INIT_LIST_HEAD(&device->port_list); diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index b56c9428f3c5..9dd0bc89c3aa 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -2208,7 +2208,7 @@ int qib_cdev_init(int minor, const char *name, goto err_cdev; } - device = device_create(qib_class, NULL, dev, NULL, name); + device = device_create(qib_class, NULL, dev, NULL, "%s", name); if (!IS_ERR(device)) goto done; ret = PTR_ERR(device); diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c index 88305c9cbff5..8b1a66c6ca8a 100644 --- a/drivers/isdn/mISDN/dsp_pipeline.c +++ b/drivers/isdn/mISDN/dsp_pipeline.c @@ -102,7 +102,7 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem) entry->dev.class = elements_class; entry->dev.release = mISDN_dsp_dev_release; dev_set_drvdata(&entry->dev, elem); - dev_set_name(&entry->dev, elem->name); + dev_set_name(&entry->dev, "%s", elem->name); ret = device_register(&entry->dev); if (ret) { printk(KERN_ERR "%s: failed to register %s\n", diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index c400c57c394a..048c823f5c51 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1151,7 +1151,7 @@ static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name) ret = bdi_init(bdi); if (!ret) - ret = bdi_register(bdi, NULL, name); + ret = bdi_register(bdi, NULL, "%s", name); if (ret) bdi_destroy(bdi); diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index e4ac38aca580..b13344c59808 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -743,7 +743,7 @@ static int wmi_create_device(const struct guid_block *gblock, wblock->dev.class = &wmi_class; wmi_gtoa(gblock->guid, guid_string); - dev_set_name(&wblock->dev, guid_string); + dev_set_name(&wblock->dev, "%s", guid_string); dev_set_drvdata(&wblock->dev, wblock); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c1c555242d0d..8fa3d0b73ad9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2931,7 +2931,7 @@ static int sd_probe(struct device *dev) device_initialize(&sdkp->dev); sdkp->dev.parent = dev; sdkp->dev.class = &sd_disk_class; - dev_set_name(&sdkp->dev, dev_name(dev)); + dev_set_name(&sdkp->dev, "%s", dev_name(dev)); if (device_add(&sdkp->dev)) goto out_free_index; diff --git a/drivers/staging/android/timed_output.c b/drivers/staging/android/timed_output.c index ec9e2ae2de0d..ee3a57f22832 100644 --- a/drivers/staging/android/timed_output.c +++ b/drivers/staging/android/timed_output.c @@ -78,7 +78,7 @@ int timed_output_dev_register(struct timed_output_dev *tdev) tdev->index = atomic_inc_return(&device_count); tdev->dev = device_create(timed_output_class, NULL, - MKDEV(0, tdev->index), NULL, tdev->name); + MKDEV(0, tdev->index), NULL, "%s", tdev->name); if (IS_ERR(tdev->dev)) return PTR_ERR(tdev->dev); diff --git a/drivers/staging/dgrp/dgrp_sysfs.c b/drivers/staging/dgrp/dgrp_sysfs.c index 7d1b36d1e75f..8cee9c8bc38b 100644 --- a/drivers/staging/dgrp/dgrp_sysfs.c +++ b/drivers/staging/dgrp/dgrp_sysfs.c @@ -273,7 +273,7 @@ void dgrp_create_node_class_sysfs_files(struct nd_struct *nd) sprintf(name, "node%ld", nd->nd_major); nd->nd_class_dev = device_create(dgrp_class, dgrp_class_nodes_dev, - MKDEV(0, nd->nd_major), NULL, name); + MKDEV(0, nd->nd_major), NULL, "%s", name); ret = sysfs_create_group(&nd->nd_class_dev->kobj, &dgrp_node_attribute_group); diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c index 5241f1d0ef7a..9209eafc75b1 100644 --- a/drivers/uwb/lc-dev.c +++ b/drivers/uwb/lc-dev.c @@ -440,7 +440,7 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce) uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */ uwb_dev->mac_addr = *bce->mac_addr; uwb_dev->dev_addr = bce->dev_addr; - dev_set_name(&uwb_dev->dev, macbuf); + dev_set_name(&uwb_dev->dev, "%s", macbuf); result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc); if (result < 0) { dev_err(dev, "new device %s: cannot instantiate device\n", diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index c74e7aa46731..e3c279083253 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -304,7 +304,7 @@ struct backlight_device *backlight_device_register(const char *name, new_bd->dev.class = backlight_class; new_bd->dev.parent = parent; new_bd->dev.release = bl_device_release; - dev_set_name(&new_bd->dev, name); + dev_set_name(&new_bd->dev, "%s", name); dev_set_drvdata(&new_bd->dev, devdata); /* Set default properties */ diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 34fb6bd798c8..3649fd9ddb3a 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -219,7 +219,7 @@ struct lcd_device *lcd_device_register(const char *name, struct device *parent, new_ld->dev.class = lcd_class; new_ld->dev.parent = parent; new_ld->dev.release = lcd_device_release; - dev_set_name(&new_ld->dev, name); + dev_set_name(&new_ld->dev, "%s", name); dev_set_drvdata(&new_ld->dev, devdata); rc = device_register(&new_ld->dev); diff --git a/drivers/video/output.c b/drivers/video/output.c index 0d6f2cda9369..6285b9718451 100644 --- a/drivers/video/output.c +++ b/drivers/video/output.c @@ -97,7 +97,7 @@ struct output_device *video_output_register(const char *name, new_dev->props = op; new_dev->dev.class = &video_output_class; new_dev->dev.parent = dev; - dev_set_name(&new_dev->dev, name); + dev_set_name(&new_dev->dev, "%s", name); dev_set_drvdata(&new_dev->dev, devdata); ret_code = device_register(&new_dev->dev); if (ret_code) { diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 56cfaaa9d006..8c9db16500e3 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -447,7 +447,7 @@ int xenbus_probe_node(struct xen_bus_type *bus, if (err) goto fail; - dev_set_name(&xendev->dev, devname); + dev_set_name(&xendev->dev, "%s", devname); /* Register with generic device framework. */ err = device_register(&xendev->dev); diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 502517492258..d014ee5fcbbd 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -515,7 +515,6 @@ EXPORT_SYMBOL(bdi_destroy); int bdi_setup_and_register(struct backing_dev_info *bdi, char *name, unsigned int cap) { - char tmp[32]; int err; bdi->name = name; @@ -524,8 +523,8 @@ int bdi_setup_and_register(struct backing_dev_info *bdi, char *name, if (err) return err; - sprintf(tmp, "%.28s%s", name, "-%d"); - err = bdi_register(bdi, NULL, tmp, atomic_long_inc_return(&bdi_seq)); + err = bdi_register(bdi, NULL, "%.28s-%ld", name, + atomic_long_inc_return(&bdi_seq)); if (err) { bdi_destroy(bdi); return err; diff --git a/sound/sound_core.c b/sound/sound_core.c index 359753fc24e1..45759f4cca75 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -292,7 +292,7 @@ retry: } device_create(sound_class, dev, MKDEV(SOUND_MAJOR, s->unit_minor), - NULL, s->name+6); + NULL, "%s", s->name+6); return s->unit_minor; fail: -- cgit v1.2.3