From d127ea7b8643a93d14d1f3c542974407f14d3663 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 31 Jul 2008 16:09:34 +0900 Subject: libata: restore SControl on detach Save SControl during probing and restore it on detach. This prevents adjustments made by libata drivers to seep into the next driver which gets attached (be it a libata one or not). It's not clear whether SControl also needs to be restored on suspend. The next system to have control (ACPI or kexec'd kernel) would probably like to see the original SControl value but there's no guarantee that a link is gonna keep working after SControl is adjusted without a reset and adding a reset and modified recovery cycle soley for this is an overkill. For now, do it only for detach. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index dddcb9fde35a..5f8f57a818fb 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5199,15 +5199,14 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) */ int sata_link_init_spd(struct ata_link *link) { - u32 scontrol; u8 spd; int rc; - rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol); if (rc) return rc; - spd = (scontrol >> 4) & 0xf; + spd = (link->saved_scontrol >> 4) & 0xf; if (spd) link->hw_sata_spd_limit &= (1 << spd) - 1; @@ -5794,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap) ata_port_wait_eh(ap); /* EH is now guaranteed to see UNLOADING - EH context belongs - * to us. Disable all existing devices. + * to us. Restore SControl and disable all existing devices. */ - ata_port_for_each_link(link, ap) { + __ata_port_for_each_link(link, ap) { + sata_scr_write(link, SCR_CONTROL, link->saved_scontrol); ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } -- cgit v1.2.3