From 8e182a90f91456335756d2ce304ad470795d98e1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Nov 2009 13:23:11 +0000 Subject: pata_piccolo: Driver for old Toshiba chipsets We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 9 +++ drivers/ata/Makefile | 1 + drivers/ata/ata_generic.c | 5 +- drivers/ata/pata_piccolo.c | 140 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 154 insertions(+), 1 deletion(-) create mode 100644 drivers/ata/pata_piccolo.c (limited to 'drivers/ata') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a47ca75aa078..676f08b004b3 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -667,6 +667,15 @@ config PATA_SIS If unsure, say N. +config PATA_TOSHIBA + tristate "Toshiba Piccolo support (Experimental)" + depends on PCI && EXPERIMENTAL + help + Support for the Toshiba Piccolo controllers. Currently only the + primary channel is supported by this driver. + + If unsure, say N. + config PATA_VIA tristate "VIA PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 01e126f343b3..d909435e9d81 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o obj-$(CONFIG_PATA_SIL680) += pata_sil680.o +obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o obj-$(CONFIG_PATA_VIA) += pata_via.o obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index ecfd22b4f1ce..12e26c3c68e3 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -168,9 +168,12 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, - { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, +#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE) { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, +#endif /* Must come last. If you add entries adjust this table appropriately */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, { 0, }, diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c new file mode 100644 index 000000000000..bfe0180f3efa --- /dev/null +++ b/drivers/ata/pata_piccolo.c @@ -0,0 +1,140 @@ +/* + * pata_piccolo.c - Toshiba Piccolo PATA/SATA controller driver. + * + * This is basically an update to ata_generic.c to add Toshiba Piccolo support + * then split out to keep ata_generic "clean". + * + * Copyright 2005 Red Hat Inc, all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick + * Portions (C) Copyright 2002 Red Hat Inc + * + * May be copied or modified under the terms of the GNU General Public License + * + * The timing data tables/programming info are courtesy of the NetBSD driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_piccolo" +#define DRV_VERSION "0.0.1" + + + +static void tosh_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u16 pio[6] = { /* For reg 0x50 low word & E088 */ + 0x0566, 0x0433, 0x0311, 0x0201, 0x0200, 0x0100 + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 conf; + pci_read_config_word(pdev, 0x50, &conf); + conf &= 0xE088; + conf |= pio[adev->pio_mode - XFER_PIO_0]; + pci_write_config_word(pdev, 0x50, conf); +} + +static void tosh_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 conf; + pci_read_config_dword(pdev, 0x5C, &conf); + conf &= 0x78FFE088; /* Keep the other bits */ + if (adev->dma_mode >= XFER_UDMA_0) { + int udma = adev->dma_mode - XFER_UDMA_0; + conf |= 0x80000000; + conf |= (udma + 2) << 28; + conf |= (2 - udma) * 0x111; /* spread into three nibbles */ + } else { + static const u32 mwdma[4] = { + 0x0655, 0x0200, 0x0200, 0x0100 + }; + conf |= mwdma[adev->dma_mode - XFER_MW_DMA_0]; + } + pci_write_config_dword(pdev, 0x5C, conf); +} + + +static struct scsi_host_template tosh_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations tosh_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_piomode = tosh_set_piomode, + .set_dmamode = tosh_set_dmamode +}; + +/** + * ata_tosh_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &tosh_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + /* Just one port for the moment */ + return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL); +} + +static struct pci_device_id ata_tosh[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, + { 0, }, +}; + +static struct pci_driver ata_tosh_pci_driver = { + .name = DRV_NAME, + .id_table = ata_tosh, + .probe = ata_tosh_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static int __init ata_tosh_init(void) +{ + return pci_register_driver(&ata_tosh_pci_driver); +} + + +static void __exit ata_tosh_exit(void) +{ + pci_unregister_driver(&ata_tosh_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("Low level driver for Toshiba Piccolo ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_tosh); +MODULE_VERSION(DRV_VERSION); + +module_init(ata_tosh_init); +module_exit(ata_tosh_exit); + -- cgit v1.2.3