From 7390896b3484d44cbdb8bc4859964314ac66d3c9 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Mon, 26 Sep 2022 20:53:06 +0000 Subject: ata: libata: fix NCQ autosense logic Currently, the logic if we should call ata_scsi_set_sense() (and set flag ATA_QCFLAG_SENSE_VALID to indicate that we have successfully added sense data to the struct ata_queued_cmd) looks like this: if (dev->class == ATA_DEV_ZAC && ((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary)) The problem with this is that a drive can support the NCQ command error log without supporting NCQ autosense. On such a drive, if the failing command has sense data, the status field in the NCQ command error log will have the ATA_SENSE bit set. It is just that this sense data is not included in the NCQ command error log when NCQ autosense is not supported. Instead the sense data has to be fetched using the REQUEST SENSE DATA EXT command. Therefore, we should only add the sense data if the drive supports NCQ autosense AND the ATA_SENSE bit is set in the status field. Fix this, and at the same time, remove the duplicated ATA_DEV_ZAC check. The struct ata_taskfile supplied to ata_eh_read_log_10h() is memset:ed before calling the function, so simply checking if qc->result_tf.auxiliary is set is sufficient to tell us that the log actually contained sense data. Fixes: d238ffd59d3c ("libata: do not attempt to retrieve sense code twice") Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal --- drivers/ata/libata-sata.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index b6806d41a8c5..fd4dccc25389 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -1392,7 +1392,8 @@ static int ata_eh_read_log_10h(struct ata_device *dev, tf->hob_lbah = buf[10]; tf->nsect = buf[12]; tf->hob_nsect = buf[13]; - if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id)) + if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id) && + (tf->status & ATA_SENSE)) tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16]; return 0; @@ -1456,8 +1457,12 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) memcpy(&qc->result_tf, &tf, sizeof(tf)); qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; - if (dev->class == ATA_DEV_ZAC && - ((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary)) { + + /* + * If the device supports NCQ autosense, ata_eh_read_log_10h() will have + * stored the sense data in qc->result_tf.auxiliary. + */ + if (qc->result_tf.auxiliary) { char sense_key, asc, ascq; sense_key = (qc->result_tf.auxiliary >> 16) & 0xff; -- cgit v1.2.3