From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_mpiix.c | 61 ++++++++++++++++++++++++------------------------ 1 file changed, 31 insertions(+), 30 deletions(-) (limited to 'drivers/ata/pata_mpiix.c') diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index c4a1b10f3bca..9837faf0f620 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -188,7 +188,7 @@ static struct ata_port_operations mpiix_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = mpiix_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -199,10 +199,11 @@ static struct ata_port_operations mpiix_port_ops = { static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* Single threaded by the PCI probe logic */ - static struct ata_probe_ent probe[2]; + static struct ata_probe_ent probe; static int printed_version; + void __iomem *cmd_addr, *ctl_addr; u16 idetim; - int enabled; + int irq; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); @@ -215,43 +216,43 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (!(idetim & ENABLED)) return -ENODEV; + if (!(idetim & SECONDARY)) { + irq = 14; + cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8); + ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1); + } else { + irq = 15; + cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8); + ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1); + } + + if (!cmd_addr || !ctl_addr) + return -ENOMEM; + /* We do our own plumbing to avoid leaking special cases for whacko ancient hardware into the core code. There are two issues to worry about. #1 The chip is a bridge so if in legacy mode and without BARs set fools the setup. #2 If you pci_disable_device the MPIIX your box goes castors up */ - INIT_LIST_HEAD(&probe[0].node); - probe[0].dev = pci_dev_to_dev(dev); - probe[0].port_ops = &mpiix_port_ops; - probe[0].sht = &mpiix_sht; - probe[0].pio_mask = 0x1F; - probe[0].irq = 14; - probe[0].irq_flags = SA_SHIRQ; - probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; - probe[0].n_ports = 1; - probe[0].port[0].cmd_addr = 0x1F0; - probe[0].port[0].ctl_addr = 0x3F6; - probe[0].port[0].altstatus_addr = 0x3F6; - - /* The secondary lurks at different addresses but is otherwise - the same beastie */ - - INIT_LIST_HEAD(&probe[1].node); - probe[1] = probe[0]; - probe[1].irq = 15; - probe[1].port[0].cmd_addr = 0x170; - probe[1].port[0].ctl_addr = 0x376; - probe[1].port[0].altstatus_addr = 0x376; + INIT_LIST_HEAD(&probe.node); + probe.dev = pci_dev_to_dev(dev); + probe.port_ops = &mpiix_port_ops; + probe.sht = &mpiix_sht; + probe.pio_mask = 0x1F; + probe.irq = irq; + probe.irq_flags = SA_SHIRQ; + probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST; + probe.n_ports = 1; + probe.port[0].cmd_addr = cmd_addr; + probe.port[0].ctl_addr = ctl_addr; + probe.port[0].altstatus_addr = ctl_addr; /* Let libata fill in the port details */ - ata_std_ports(&probe[0].port[0]); - ata_std_ports(&probe[1].port[0]); + ata_std_ports(&probe.port[0]); /* Now add the port that is active */ - enabled = (idetim & SECONDARY) ? 1 : 0; - - if (ata_device_add(&probe[enabled])) + if (ata_device_add(&probe)) return 0; return -ENODEV; } -- cgit v1.2.3