From 95b482a8d31116f3f5c2a5089569393234d06385 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 9 Jan 2009 00:13:17 -0500 Subject: ACPICA: create acpica/ directory also, delete sleep/ and delete ACPI_CFLAGS from Makefile Signed-off-by: Len Brown --- drivers/acpi/acpica/tbfadt.c | 610 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 610 insertions(+) create mode 100644 drivers/acpi/acpica/tbfadt.c (limited to 'drivers/acpi/acpica/tbfadt.c') diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c new file mode 100644 index 000000000000..87f22e68c6d6 --- /dev/null +++ b/drivers/acpi/acpica/tbfadt.c @@ -0,0 +1,610 @@ +/****************************************************************************** + * + * Module Name: tbfadt - FADT table utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include +#include + +#define _COMPONENT ACPI_TABLES +ACPI_MODULE_NAME("tbfadt") + +/* Local prototypes */ +static inline void +acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, + u8 space_id, u8 byte_width, u64 address); + +static void acpi_tb_convert_fadt(void); + +static void acpi_tb_validate_fadt(void); + +/* Table for conversion of FADT to common internal format and FADT validation */ + +typedef struct acpi_fadt_info { + char *name; + u8 address64; + u8 address32; + u8 length; + u8 default_length; + u8 type; + +} acpi_fadt_info; + +#define ACPI_FADT_REQUIRED 1 +#define ACPI_FADT_SEPARATE_LENGTH 2 + +static struct acpi_fadt_info fadt_info_table[] = { + {"Pm1aEventBlock", + ACPI_FADT_OFFSET(xpm1a_event_block), + ACPI_FADT_OFFSET(pm1a_event_block), + ACPI_FADT_OFFSET(pm1_event_length), + ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ + ACPI_FADT_REQUIRED}, + + {"Pm1bEventBlock", + ACPI_FADT_OFFSET(xpm1b_event_block), + ACPI_FADT_OFFSET(pm1b_event_block), + ACPI_FADT_OFFSET(pm1_event_length), + ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */ + 0}, + + {"Pm1aControlBlock", + ACPI_FADT_OFFSET(xpm1a_control_block), + ACPI_FADT_OFFSET(pm1a_control_block), + ACPI_FADT_OFFSET(pm1_control_length), + ACPI_PM1_REGISTER_WIDTH, + ACPI_FADT_REQUIRED}, + + {"Pm1bControlBlock", + ACPI_FADT_OFFSET(xpm1b_control_block), + ACPI_FADT_OFFSET(pm1b_control_block), + ACPI_FADT_OFFSET(pm1_control_length), + ACPI_PM1_REGISTER_WIDTH, + 0}, + + {"Pm2ControlBlock", + ACPI_FADT_OFFSET(xpm2_control_block), + ACPI_FADT_OFFSET(pm2_control_block), + ACPI_FADT_OFFSET(pm2_control_length), + ACPI_PM2_REGISTER_WIDTH, + ACPI_FADT_SEPARATE_LENGTH}, + + {"PmTimerBlock", + ACPI_FADT_OFFSET(xpm_timer_block), + ACPI_FADT_OFFSET(pm_timer_block), + ACPI_FADT_OFFSET(pm_timer_length), + ACPI_PM_TIMER_WIDTH, + ACPI_FADT_REQUIRED}, + + {"Gpe0Block", + ACPI_FADT_OFFSET(xgpe0_block), + ACPI_FADT_OFFSET(gpe0_block), + ACPI_FADT_OFFSET(gpe0_block_length), + 0, + ACPI_FADT_SEPARATE_LENGTH}, + + {"Gpe1Block", + ACPI_FADT_OFFSET(xgpe1_block), + ACPI_FADT_OFFSET(gpe1_block), + ACPI_FADT_OFFSET(gpe1_block_length), + 0, + ACPI_FADT_SEPARATE_LENGTH} +}; + +#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info)) + +/******************************************************************************* + * + * FUNCTION: acpi_tb_init_generic_address + * + * PARAMETERS: generic_address - GAS struct to be initialized + * byte_width - Width of this register + * Address - Address of the register + * + * RETURN: None + * + * DESCRIPTION: Initialize a Generic Address Structure (GAS) + * See the ACPI specification for a full description and + * definition of this structure. + * + ******************************************************************************/ + +static inline void +acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, + u8 space_id, u8 byte_width, u64 address) +{ + + /* + * The 64-bit Address field is non-aligned in the byte packed + * GAS struct. + */ + ACPI_MOVE_64_TO_64(&generic_address->address, &address); + + /* All other fields are byte-wide */ + + generic_address->space_id = space_id; + generic_address->bit_width = (u8)ACPI_MUL_8(byte_width); + generic_address->bit_offset = 0; + generic_address->access_width = 0; /* Access width ANY */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_parse_fadt + * + * PARAMETERS: table_index - Index for the FADT + * Flags - Flags + * + * RETURN: None + * + * DESCRIPTION: Initialize the FADT, DSDT and FACS tables + * (FADT contains the addresses of the DSDT and FACS) + * + ******************************************************************************/ + +void acpi_tb_parse_fadt(u32 table_index, u8 flags) +{ + u32 length; + struct acpi_table_header *table; + + /* + * The FADT has multiple versions with different lengths, + * and it contains pointers to both the DSDT and FACS tables. + * + * Get a local copy of the FADT and convert it to a common format + * Map entire FADT, assumed to be smaller than one page. + */ + length = acpi_gbl_root_table_list.tables[table_index].length; + + table = + acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index]. + address, length); + if (!table) { + return; + } + + /* + * Validate the FADT checksum before we copy the table. Ignore + * checksum error as we want to try to get the DSDT and FACS. + */ + (void)acpi_tb_verify_checksum(table, length); + + /* Obtain a local copy of the FADT in common ACPI 2.0+ format */ + + acpi_tb_create_local_fadt(table, length); + + /* All done with the real FADT, unmap it */ + + acpi_os_unmap_memory(table, length); + + /* Obtain the DSDT and FACS tables via their addresses within the FADT */ + + acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt, + flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT); + + acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs, + flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_create_local_fadt + * + * PARAMETERS: Table - Pointer to BIOS FADT + * Length - Length of the table + * + * RETURN: None + * + * DESCRIPTION: Get a local copy of the FADT and convert it to a common format. + * Performs validation on some important FADT fields. + * + * NOTE: We create a local copy of the FADT regardless of the version. + * + ******************************************************************************/ + +void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) +{ + + /* + * Check if the FADT is larger than the largest table that we expect + * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue + * a warning. + */ + if (length > sizeof(struct acpi_table_fadt)) { + ACPI_WARNING((AE_INFO, + "FADT (revision %u) is longer than ACPI 2.0 version, " + "truncating length 0x%X to 0x%zX", + table->revision, (unsigned)length, + sizeof(struct acpi_table_fadt))); + } + + /* Clear the entire local FADT */ + + ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt)); + + /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */ + + ACPI_MEMCPY(&acpi_gbl_FADT, table, + ACPI_MIN(length, sizeof(struct acpi_table_fadt))); + + /* + * 1) Convert the local copy of the FADT to the common internal format + * 2) Validate some of the important values within the FADT + */ + acpi_tb_convert_fadt(); +} + +/******************************************************************************* + * + * FUNCTION: acpi_tb_convert_fadt + * + * PARAMETERS: None, uses acpi_gbl_FADT + * + * RETURN: None + * + * DESCRIPTION: Converts all versions of the FADT to a common internal format. + * Expand all 32-bit addresses to 64-bit. + * + * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), + * and must contain a copy of the actual FADT. + * + * ACPICA will use the "X" fields of the FADT for all addresses. + * + * "X" fields are optional extensions to the original V1.0 fields. Even if + * they are present in the structure, they can be optionally not used by + * setting them to zero. Therefore, we must selectively expand V1.0 fields + * if the corresponding X field is zero. + * + * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding + * "X" fields. + * + * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by + * expanding the corresponding ACPI 1.0 field. + * + ******************************************************************************/ + +static void acpi_tb_convert_fadt(void) +{ + u8 pm1_register_bit_width; + u8 pm1_register_byte_width; + struct acpi_generic_address *target64; + u32 i; + + /* Update the local FADT table header length */ + + acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); + + /* + * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. + * Later code will always use the X 64-bit field. Also, check for an + * address mismatch between the 32-bit and 64-bit address fields + * (FIRMWARE_CTRL/X_FIRMWARE_CTRL, DSDT/X_DSDT) which would indicate + * the presence of two FACS or two DSDT tables. + */ + if (!acpi_gbl_FADT.Xfacs) { + acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs; + } else if (acpi_gbl_FADT.facs && + (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { + ACPI_WARNING((AE_INFO, + "32/64 FACS address mismatch in FADT - two FACS tables!")); + } + + if (!acpi_gbl_FADT.Xdsdt) { + acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt; + } else if (acpi_gbl_FADT.dsdt && + (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { + ACPI_WARNING((AE_INFO, + "32/64 DSDT address mismatch in FADT - two DSDT tables!")); + } + + /* + * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which + * should be zero are indeed zero. This will workaround BIOSs that + * inadvertently place values in these fields. + * + * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at + * offset 45, 55, 95, and the word located at offset 109, 110. + */ + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { + acpi_gbl_FADT.preferred_profile = 0; + acpi_gbl_FADT.pstate_control = 0; + acpi_gbl_FADT.cst_control = 0; + acpi_gbl_FADT.boot_flags = 0; + } + + /* + * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" + * generic address structures as necessary. Later code will always use + * the 64-bit address structures. + */ + for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { + target64 = + ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT, + fadt_info_table[i].address64); + + /* Expand only if the 64-bit X target is null */ + + if (!target64->address) { + + /* The space_id is always I/O for the 32-bit legacy address fields */ + + acpi_tb_init_generic_address(target64, + ACPI_ADR_SPACE_SYSTEM_IO, + *ACPI_ADD_PTR(u8, + &acpi_gbl_FADT, + fadt_info_table + [i].length), + (u64) * ACPI_ADD_PTR(u32, + &acpi_gbl_FADT, + fadt_info_table + [i]. + address32)); + } + } + + /* Validate FADT values now, before we make any changes */ + + acpi_tb_validate_fadt(); + + /* + * Optionally check all register lengths against the default values and + * update them if they are incorrect. + */ + if (acpi_gbl_use_default_register_widths) { + for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { + target64 = + ACPI_ADD_PTR(struct acpi_generic_address, + &acpi_gbl_FADT, + fadt_info_table[i].address64); + + /* + * If a valid register (Address != 0) and the (default_length > 0) + * (Not a GPE register), then check the width against the default. + */ + if ((target64->address) && + (fadt_info_table[i].default_length > 0) && + (fadt_info_table[i].default_length != + target64->bit_width)) { + ACPI_WARNING((AE_INFO, + "Invalid length for %s: %d, using default %d", + fadt_info_table[i].name, + target64->bit_width, + fadt_info_table[i]. + default_length)); + + /* Incorrect size, set width to the default */ + + target64->bit_width = + fadt_info_table[i].default_length; + } + } + } + + /* + * Get the length of the individual PM1 registers (enable and status). + * Each register is defined to be (event block length / 2). + */ + pm1_register_bit_width = + (u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width); + pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width); + + /* + * Adjust the lengths of the PM1 Event Blocks so that they can be used to + * access the PM1 status register(s). Use (width / 2) + */ + acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width; + acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width; + + /* + * Calculate separate GAS structs for the PM1 Enable registers. + * These addresses do not appear (directly) in the FADT, so it is + * useful to calculate them once, here. + * + * The PM event blocks are split into two register blocks, first is the + * PM Status Register block, followed immediately by the PM Enable + * Register block. Each is of length (xpm1x_event_block.bit_width/2). + * + * On various systems the v2 fields (and particularly the bit widths) + * cannot be relied upon, though. Hence resort to using the v1 length + * here (and warn about the inconsistency). + */ + if (acpi_gbl_FADT.xpm1a_event_block.bit_width + != acpi_gbl_FADT.pm1_event_length * 8) + printk(KERN_WARNING "FADT: " + "X_PM1a_EVT_BLK.bit_width (%u) does not match" + " PM1_EVT_LEN (%u)\n", + acpi_gbl_FADT.xpm1a_event_block.bit_width, + acpi_gbl_FADT.pm1_event_length); + + /* The PM1A register block is required */ + + acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable, + acpi_gbl_FADT.xpm1a_event_block.space_id, + pm1_register_byte_width, + (acpi_gbl_FADT.xpm1a_event_block.address + + pm1_register_byte_width)); + /* Don't forget to copy space_id of the GAS */ + acpi_gbl_xpm1a_enable.space_id = + acpi_gbl_FADT.xpm1a_event_block.space_id; + + /* The PM1B register block is optional, ignore if not present */ + + if (acpi_gbl_FADT.xpm1b_event_block.address) { + if (acpi_gbl_FADT.xpm1b_event_block.bit_width + != acpi_gbl_FADT.pm1_event_length * 8) + printk(KERN_WARNING "FADT: " + "X_PM1b_EVT_BLK.bit_width (%u) does not match" + " PM1_EVT_LEN (%u)\n", + acpi_gbl_FADT.xpm1b_event_block.bit_width, + acpi_gbl_FADT.pm1_event_length); + acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, + acpi_gbl_FADT.xpm1b_event_block.space_id, + pm1_register_byte_width, + (acpi_gbl_FADT.xpm1b_event_block. + address + pm1_register_byte_width)); + /* Don't forget to copy space_id of the GAS */ + acpi_gbl_xpm1b_enable.space_id = + acpi_gbl_FADT.xpm1b_event_block.space_id; + + } +} + +/****************************************************************************** + * + * FUNCTION: acpi_tb_validate_fadt + * + * PARAMETERS: Table - Pointer to the FADT to be validated + * + * RETURN: None + * + * DESCRIPTION: Validate various important fields within the FADT. If a problem + * is found, issue a message, but no status is returned. + * Used by both the table manager and the disassembler. + * + * Possible additional checks: + * (acpi_gbl_FADT.pm1_event_length >= 4) + * (acpi_gbl_FADT.pm1_control_length >= 2) + * (acpi_gbl_FADT.pm_timer_length >= 4) + * Gpe block lengths must be multiple of 2 + * + ******************************************************************************/ + +static void acpi_tb_validate_fadt(void) +{ + char *name; + u32 *address32; + struct acpi_generic_address *address64; + u8 length; + u32 i; + + /* + * Check for FACS and DSDT address mismatches. An address mismatch between + * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and + * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables. + */ + if (acpi_gbl_FADT.facs && + (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) { + ACPI_WARNING((AE_INFO, + "32/64X FACS address mismatch in FADT - " + "two FACS tables! %8.8X/%8.8X%8.8X", + acpi_gbl_FADT.facs, + ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs))); + } + + if (acpi_gbl_FADT.dsdt && + (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) { + ACPI_WARNING((AE_INFO, + "32/64X DSDT address mismatch in FADT - " + "two DSDT tables! %8.8X/%8.8X%8.8X", + acpi_gbl_FADT.dsdt, + ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt))); + } + + /* Examine all of the 64-bit extended address fields (X fields) */ + + for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { + /* + * Generate pointers to the 32-bit and 64-bit addresses, get the + * register length (width), and the register name + */ + address64 = ACPI_ADD_PTR(struct acpi_generic_address, + &acpi_gbl_FADT, + fadt_info_table[i].address64); + address32 = + ACPI_ADD_PTR(u32, &acpi_gbl_FADT, + fadt_info_table[i].address32); + length = + *ACPI_ADD_PTR(u8, &acpi_gbl_FADT, + fadt_info_table[i].length); + name = fadt_info_table[i].name; + + /* + * For each extended field, check for length mismatch between the + * legacy length field and the corresponding 64-bit X length field. + */ + if (address64 && (address64->bit_width != ACPI_MUL_8(length))) { + ACPI_WARNING((AE_INFO, + "32/64X length mismatch in %s: %d/%d", + name, ACPI_MUL_8(length), + address64->bit_width)); + } + + if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) { + /* + * Field is required (Pm1a_event, Pm1a_control, pm_timer). + * Both the address and length must be non-zero. + */ + if (!address64->address || !length) { + ACPI_ERROR((AE_INFO, + "Required field %s has zero address and/or length: %8.8X%8.8X/%X", + name, + ACPI_FORMAT_UINT64(address64-> + address), + length)); + } + } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) { + /* + * Field is optional (PM2Control, GPE0, GPE1) AND has its own + * length field. If present, both the address and length must be valid. + */ + if ((address64->address && !length) + || (!address64->address && length)) { + ACPI_WARNING((AE_INFO, + "Optional field %s has zero address or length: %8.8X%8.8X/%X", + name, + ACPI_FORMAT_UINT64(address64-> + address), + length)); + } + } + + /* If both 32- and 64-bit addresses are valid (non-zero), they must match */ + + if (address64->address && *address32 && + (address64->address != (u64) * address32)) { + ACPI_ERROR((AE_INFO, + "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 64X", + name, *address32, + ACPI_FORMAT_UINT64(address64->address))); + } + } +} -- cgit v1.2.3