From 85d9bf152bdaa7e98a05cc460aa6880efdf0b433 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 4 May 2016 10:27:46 +0200
Subject: ARM: shmobile: pm-rmobile: Postpone call to pm_genpd_init()

All local setup of the generic_pm_domain structure should have been
completed before calling pm_genpd_init().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index c0b05e9e6442..45a195501b78 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -131,13 +131,13 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	struct dev_power_governor *gov = rmobile_pd->gov;
 
 	genpd->flags = GENPD_FLAG_PM_CLK;
-	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 	genpd->dev_ops.active_wakeup	= rmobile_pd_active_wakeup;
 	genpd->power_off		= rmobile_pd_power_down;
 	genpd->power_on			= rmobile_pd_power_up;
 	genpd->attach_dev		= cpg_mstp_attach_dev;
 	genpd->detach_dev		= cpg_mstp_detach_dev;
 	__rmobile_pd_power_up(rmobile_pd, false);
+	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 }
 
 static int rmobile_pd_suspend_busy(void)
-- 
cgit v1.2.3


From c94bc815f3c757df402d6f6a3e8d855b9168e6af Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 17 May 2016 17:15:33 +0200
Subject: ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs

Currently the different SoCs in the R-Car Gen2 family use different
types of on-chip RAM for the jump stub:
  - R-Car H2 uses Media RAM,
  - R-Car M2-W uses another type of optional On-chip RAM, as it doesn't
    have Media RAM,
  - R-Car M2-N uses Inter Connect RAM in Magnus Damm's "ARM: shmobile:
    r8a7793 boot address update".

As all R-Car Gen2 SoCs have 4 KiB of Inter Connect RAM, consolidate the
code by always using that.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 691ac166a277..61361dac6068 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -26,8 +26,7 @@
 #define CA7RESCNT	0x0044
 
 /* On-chip RAM */
-#define MERAM		0xe8080000
-#define RAM		0xe6300000
+#define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
 /* SYSC */
 #define SYSCIER 0x0c
@@ -58,7 +57,7 @@ void __init rcar_gen2_pm_init(void)
 	struct device_node *np, *cpus;
 	bool has_a7 = false;
 	bool has_a15 = false;
-	phys_addr_t boot_vector_addr = 0;
+	phys_addr_t boot_vector_addr = ICRAM1;
 	u32 syscier = 0;
 
 	if (once++)
@@ -75,14 +74,10 @@ void __init rcar_gen2_pm_init(void)
 			has_a7 = true;
 	}
 
-	if (of_machine_is_compatible("renesas,r8a7790")) {
-		boot_vector_addr = MERAM;
+	if (of_machine_is_compatible("renesas,r8a7790"))
 		syscier = 0x013111ef;
-
-	} else if (of_machine_is_compatible("renesas,r8a7791")) {
-		boot_vector_addr = RAM;
+	else if (of_machine_is_compatible("renesas,r8a7791"))
 		syscier = 0x00111003;
-	}
 
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
 	p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
-- 
cgit v1.2.3


From 6697ad24b1d7997a340852056e477c71c429d5ee Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Fri, 3 Jun 2016 13:25:46 +0300
Subject: ARM: OMAP: rx51-video: Do not set TV connector_type

OMAP_DSS_VENC_TYPE_COMPOSITE is 0. There is no need to explicitly set the
connector_type.
This change is needed for the omapdss header cleanup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-video.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 9cfebc5c7455..b76f84245ad9 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -32,7 +32,6 @@
 static struct connector_atv_platform_data rx51_tv_pdata = {
 	.name = "tv",
 	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
 	.invert_polarity = false,
 };
 
-- 
cgit v1.2.3


From c270e89bf2e0745da85a41178d312ef288ac5211 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 30 May 2016 13:39:56 +0300
Subject: ARM/video: omap2: Move omap_display_init declaration to
 mach-omap2/display.h

The omap_display_init() is implemented in the mach-omap2/display.c so the
declaration should have been there as well.
Change the board files to include display.h to avoid build breakage at the
same time.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-ldp.c        | 1 +
 arch/arm/mach-omap2/board-rx51-video.c | 1 +
 arch/arm/mach-omap2/display.h          | 5 +++++
 include/video/omapdss.h                | 3 ---
 4 files changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d9c3ffc39329..f364a1b779f0 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -47,6 +47,7 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "display.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index b76f84245ad9..9866ec06a395 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -22,6 +22,7 @@
 
 #include "soc.h"
 #include "board-rx51.h"
+#include "display.h"
 
 #include "mux.h"
 
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index 7375854b16c7..78f253005279 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -33,4 +33,9 @@ int omap_init_vout(void);
 
 struct device_node * __init omapdss_find_dss_of_node(void);
 
+struct omap_dss_board_info;
+
+/* Init with the board info */
+int omap_display_init(struct omap_dss_board_info *board_data);
+
 #endif
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 8e14ad7327c9..0c7ae93ebd76 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -330,9 +330,6 @@ struct omap_dss_board_info {
 	enum omapdss_version version;
 };
 
-/* Init with the board info */
-extern int omap_display_init(struct omap_dss_board_info *board_data);
-
 struct omap_video_timings {
 	/* Unit: pixels */
 	u16 x_res;
-- 
cgit v1.2.3


From f8e0db9722e069f48f58e191948e85f6254879db Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Wed, 25 May 2016 17:53:30 +0300
Subject: ARM: OMAP2: Use the platform_data header for omapdss

Instead of the full omapdss internal header, include only the platform_data
header.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-ldp.c        | 2 +-
 arch/arm/mach-omap2/board-rx51-video.c | 2 +-
 arch/arm/mach-omap2/display.c          | 2 +-
 arch/arm/mach-omap2/dss-common.c       | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f364a1b779f0..390795b334c3 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -39,7 +39,7 @@
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "board-flash.h"
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 9866ec06a395..180c6aa633bd 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -15,7 +15,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
 #include <asm/mach-types.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6ab13d18c636..70b3eaf085e4 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -29,7 +29,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap-pm.h"
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index ea2be0f5953b..1d583bc0b1a9 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -27,7 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "soc.h"
-- 
cgit v1.2.3


From 406c8f6c9954da1a521f2cb7efbee730e40b95b9 Mon Sep 17 00:00:00 2001
From: Chris Brand <chris.brand@broadcom.com>
Date: Wed, 11 May 2016 14:36:18 -0700
Subject: ARM: bcm21664: Remove reset code

The kona reset driver now provides this functionality.

Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/mach-bcm/board_bcm21664.c | 42 --------------------------------------
 1 file changed, 42 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
index 82ad5687771f..65b3db06e57a 100644
--- a/arch/arm/mach-bcm/board_bcm21664.c
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -11,53 +11,12 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/io.h>
 
 #include <asm/mach/arch.h>
 
 #include "kona_l2_cache.h"
 
-#define RSTMGR_DT_STRING		"brcm,bcm21664-resetmgr"
-
-#define RSTMGR_REG_WR_ACCESS_OFFSET	0
-#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET	4
-
-#define RSTMGR_WR_PASSWORD		0xa5a5
-#define RSTMGR_WR_PASSWORD_SHIFT	8
-#define RSTMGR_WR_ACCESS_ENABLE		1
-
-static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *base;
-	struct device_node *resetmgr;
-
-	resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
-	if (!resetmgr) {
-		pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
-		return;
-	}
-	base = of_iomap(resetmgr, 0);
-	if (!base) {
-		pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
-		return;
-	}
-
-	/*
-	 * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
-	 * register. To write to that register we must first write the password
-	 * and the enable bit in the write access enable register.
-	 */
-	writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
-		RSTMGR_WR_ACCESS_ENABLE,
-		base + RSTMGR_REG_WR_ACCESS_OFFSET);
-	writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
-
-	/* Wait for reset */
-	while (1);
-}
-
 static void __init bcm21664_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -71,6 +30,5 @@ static const char * const bcm21664_dt_compat[] = {
 
 DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
 	.init_machine = bcm21664_init,
-	.restart = bcm21664_restart,
 	.dt_compat = bcm21664_dt_compat,
 MACHINE_END
-- 
cgit v1.2.3


From 4533d5f7dd8bcf4d9348f1f8b707ca2599531183 Mon Sep 17 00:00:00 2001
From: Chris Brand <chris.brand@broadcom.com>
Date: Wed, 11 May 2016 14:36:20 -0700
Subject: ARM: Add support for Broadcom BCM23550 SoC

BCM23550 is a quad-A7 SoC used on the Broadcom "Sparrow" board.
It shares many IP blocks with other Broadcom Kona chips.

Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/mach-bcm/Kconfig          | 12 ++++++++++--
 arch/arm/mach-bcm/Makefile         |  5 ++++-
 arch/arm/mach-bcm/board_bcm23550.c | 25 +++++++++++++++++++++++++
 3 files changed, 39 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-bcm/board_bcm23550.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 68ab6412392a..5832dbae530f 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -111,9 +111,17 @@ config ARCH_BCM_21664
 	  Enable support for the BCM21664 family, which includes
 	  BCM21663 and BCM21664 variants.
 
+config ARCH_BCM_23550
+	bool "Broadcom BCM23550 SoC"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_MOBILE
+	select HAVE_SMP
+	help
+	  Enable support for the BCM23550.
+
 config ARCH_BCM_MOBILE_L2_CACHE
 	bool "Broadcom mobile SoC level 2 cache support"
-	depends on ARCH_BCM_MOBILE
+	depends on ARCH_BCM_281XX || ARCH_BCM_21664
 	default y
 	select CACHE_L2X0
 	select ARCH_BCM_MOBILE_SMC
@@ -128,7 +136,7 @@ config ARCH_BCM_MOBILE_SMP
 	select HAVE_ARM_SCU
 	select ARM_ERRATA_764369
 	help
-	  SMP support for the BCM281XX and BCM21664 SoC families.
+	  SMP support for the BCM281XX, BCM21664 and BCM23550 SoC families.
 	  Provided as an option so SMP support for SoCs of this type
 	  can be disabled for an SMP-enabled kernel.
 
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 7d665151c772..980f5850097c 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -26,7 +26,10 @@ obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
 # BCM21664
 obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
 
-# BCM281XX and BCM21664 SMP support
+# BCM23550
+obj-$(CONFIG_ARCH_BCM_23550)	+= board_bcm23550.o
+
+# BCM281XX, BCM21664 and BCM23550 SMP support
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
 
 # BCM281XX and BCM21664 L2 cache control
diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c
new file mode 100644
index 000000000000..0ac01debd077
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcm23550.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm23550_dt_compat[] = {
+	"brcm,bcm23550",
+	NULL,
+};
+
+DT_MACHINE_START(BCM23550_DT, "BCM23550 Broadcom Application Processor")
+	.dt_compat = bcm23550_dt_compat,
+MACHINE_END
-- 
cgit v1.2.3


From 5fcf999abfeb908f5a6fead7c4a99c23c705e9c0 Mon Sep 17 00:00:00 2001
From: Chris Brand <chris.brand@broadcom.com>
Date: Wed, 11 May 2016 14:36:21 -0700
Subject: ARM: BCM23550 SMP support

BCM23550 has a Cluster Dormant Control IP block that holds cores
in an idle state. Support a new CPU enable method in which the CDC is
accessed to bring the core online.

Signed-off-by: Raymond Ngun <raymond.ngun@broadcom.com>
Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/mach-bcm/platsmp.c | 58 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c
index cfae9c71fb74..33c4d8349f95 100644
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 
@@ -255,6 +256,57 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return -ENXIO;
 }
 
+/* Cluster Dormant Control command to bring CPU into a running state */
+#define CDC_CMD			6
+#define CDC_CMD_OFFSET		0
+#define CDC_CMD_REG(cpu)	(CDC_CMD_OFFSET + 4*(cpu))
+
+/*
+ * BCM23550 has a Cluster Dormant Control block that keeps the core in
+ * idle state. A command needs to be sent to the block to bring the CPU
+ * into running state.
+ */
+static int bcm23550_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *cdc_base;
+	struct device_node *dn;
+	char *name;
+	int ret;
+
+	/* Make sure a CDC node exists before booting the
+	 * secondary core.
+	 */
+	name = "brcm,bcm23550-cdc";
+	dn = of_find_compatible_node(NULL, NULL, name);
+	if (!dn) {
+		pr_err("unable to find cdc node\n");
+		return -ENODEV;
+	}
+
+	cdc_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!cdc_base) {
+		pr_err("unable to remap cdc base register\n");
+		return -ENOMEM;
+	}
+
+	/* Boot the secondary core */
+	ret = kona_boot_secondary(cpu, idle);
+	if (ret)
+		goto out;
+
+	/* Bring this CPU to RUN state so that nIRQ nFIQ
+	 * signals are unblocked.
+	 */
+	writel_relaxed(CDC_CMD, cdc_base + CDC_CMD_REG(cpu));
+
+out:
+	iounmap(cdc_base);
+
+	return ret;
+}
+
 static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
@@ -283,6 +335,12 @@ static const struct smp_operations bcm_smp_ops __initconst = {
 CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
 			&bcm_smp_ops);
 
+static const struct smp_operations bcm23550_smp_ops __initconst = {
+	.smp_boot_secondary	= bcm23550_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm23550, "brcm,bcm23550",
+			&bcm23550_smp_ops);
+
 static const struct smp_operations nsp_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= nsp_boot_secondary,
-- 
cgit v1.2.3


From 423779cfd3ca73b9236e6eb798477f3a4f13355d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 8 Jun 2016 17:35:58 +0100
Subject: ARM: bcm: fix missing include of kona_l2_cache.h

Fix a warning of kona_l2_cache_init() not being declared by
including the header file kona_l2_cache.h which defines it
thus fixing:

arch/arm/mach-bcm/kona_l2_cache.c:21:13: warning: symbol 'kona_l2_cache_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/mach-bcm/kona_l2_cache.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c
index b31970377c20..59ad86304092 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.c
+++ b/arch/arm/mach-bcm/kona_l2_cache.c
@@ -17,6 +17,7 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "bcm_kona_smc.h"
+#include "kona_l2_cache.h"
 
 void __init kona_l2_cache_init(void)
 {
-- 
cgit v1.2.3


From 566ad81f13d1bb29e454d155f18f90b46446888e Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:49:48 +0200
Subject: ARM: OMAP1: Fix typo in fiq.c

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/ams-delta-fiq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index d1f12095f315..acd6bf019c87 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -136,7 +136,7 @@ void __init ams_delta_init_fiq(void)
 		fiq_buffer[i] = 0;
 
 	/*
-	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr
 	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
 	 * only means of communication with the IRQ level and other kernel
 	 * context code.
-- 
cgit v1.2.3


From 811b6024311abf0dcf8e09bb7e787691bb26cfad Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:49:56 +0200
Subject: ARM: OMAP1: Fix typo in mtd-xip.h

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/include/mach/mtd-xip.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
index f82a8dcaad94..d09b2bc4920f 100644
--- a/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h
@@ -39,7 +39,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr)
 #define xip_currtime()		(~xip_omap_mpu_timer_read(0))
 
 /*
- * It's permitted to do approxmation for xip_elapsed_since macro
+ * It's permitted to do approximation for xip_elapsed_since macro
  * (see linux/mtd/xip.h)
  */
 
-- 
cgit v1.2.3


From 3c4d4c2033d138ff2aa1daf115260b60a311980a Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:50:07 +0200
Subject: ARM: OMAP2+: Fix typo in cm3xxx.c

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/cm3xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 187fa4386718..d91ae8206d1e 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -649,7 +649,7 @@ void omap3_cm_save_scratchpad_contents(u32 *ptr)
 	/*
 	 * As per erratum i671, ROM code does not respect the PER DPLL
 	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 * Then,  in any case, clear these bits to avoid extra latencies.
 	 */
 	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
 		~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-- 
cgit v1.2.3


From df85ac825c0da777b3bc0684e48e017ae7ff967e Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:50:13 +0200
Subject: ARM: OMAP2+: Fix typo in mux34xx.c

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mux34xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index be271f1d585b..393e687f99e2 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -1266,7 +1266,7 @@ static struct omap_ball __initdata omap3_cus_ball[] = {
 #endif
 
 /*
- * Signals different on CBB package comapared to superset
+ * Signals different on CBB package compared to superset
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
 static struct omap_mux __initdata omap3_cbb_subset[] = {
@@ -1597,7 +1597,7 @@ static struct omap_ball __initdata omap3_cbb_ball[] = {
 #endif
 
 /*
- * Signals different on 36XX CBP package comapared to 34XX CBC package
+ * Signals different on 36XX CBP package compared to 34XX CBC package
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
 static struct omap_mux __initdata omap36xx_cbp_subset[] = {
-- 
cgit v1.2.3


From 6eedfcbea84744a3b0e2c0bc11e78de28b603f03 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:50:19 +0200
Subject: ARM: OMAP2+: Fix typo in omap4-common.c

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap4-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 949696b6f17b..fb6fe26a8f8f 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -61,7 +61,7 @@ static phys_addr_t dram_sync_paddr;
 static u32 dram_sync_size;
 
 /*
- * The OMAP4 bus structure contains asynchrnous bridges which can buffer
+ * The OMAP4 bus structure contains asynchronous bridges which can buffer
  * data writes from the MPU. These asynchronous bridges can be found on
  * paths between the MPU to EMIF, and the MPU to L3 interconnects.
  *
-- 
cgit v1.2.3


From f733e7c0e0c2ccdccbc328f31376282725b5d545 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:50:25 +0200
Subject: ARM: OMAP2+: Fix typo in omap_device.c

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index f7ff3b9dad87..a7be05d83ec7 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -268,7 +268,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
  * function returns a value different than the value the caller got
  * the last time it called this function.
  *
- * If any hwmods exist for the omap_device assoiated with @pdev,
+ * If any hwmods exist for the omap_device associated with @pdev,
  * return the context loss counter for that hwmod, otherwise return
  * zero.
  */
-- 
cgit v1.2.3


From 078508f85e235c41494da868f61b5336e248dc77 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Sat, 21 May 2016 13:50:32 +0200
Subject: ARM: OMAP2+: Fix typo in sdrc.h

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/sdrc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 645a2a46b213..f11500612983 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
  *
  * Only the FULL speed values are given. Current code is such that rate
  * changes must be made at DPLLoutx2. The actual value adjustment for low
-- 
cgit v1.2.3


From 015d859193276ee924fd098ef9db9d20988c12d4 Mon Sep 17 00:00:00 2001
From: Franklin S Cooper Jr <fcooper@ti.com>
Date: Fri, 10 Jun 2016 05:02:34 -0700
Subject: ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries

Devices that utilize the OCP registers and/or PRCM registers and
register bit fields should be modeled using hwmod. Since eQEP, ePWM and
eCAP don't fall under this category, remove their hwmod entries.

Instead these clocks simply use the clock that is passed through by its
parent PWMSS. Therefore, PWMSS handles the clock for itself and its
subdevices.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 .../mach-omap2/omap_hwmod_33xx_43xx_common_data.h  | 18 -----
 .../omap_hwmod_33xx_43xx_interconnect_data.c       | 64 -----------------
 .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 84 ----------------------
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         |  9 ---
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c         | 54 --------------
 5 files changed, 229 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 7f737965f543..d3e61d1a02d7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -36,17 +36,8 @@ extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
 extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
-extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
-extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
-extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
 extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
@@ -98,17 +89,8 @@ extern struct omap_hwmod am33xx_dcan0_hwmod;
 extern struct omap_hwmod am33xx_dcan1_hwmod;
 extern struct omap_hwmod am33xx_elm_hwmod;
 extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_ecap0_hwmod;
-extern struct omap_hwmod am33xx_eqep0_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
 extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_ecap1_hwmod;
-extern struct omap_hwmod am33xx_eqep1_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
 extern struct omap_hwmod am33xx_epwmss2_hwmod;
-extern struct omap_hwmod am33xx_ecap2_hwmod;
-extern struct omap_hwmod am33xx_eqep2_hwmod;
-extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
 extern struct omap_hwmod am33xx_gpio1_hwmod;
 extern struct omap_hwmod am33xx_gpio2_hwmod;
 extern struct omap_hwmod am33xx_gpio3_hwmod;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 1c210cb2b8c1..10dff2f0086a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -176,28 +176,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ecap0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_eqep0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ehrpwm0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-
 static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
 	{
 		.pa_start	= 0x48302000,
@@ -215,27 +193,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ecap1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_eqep1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ehrpwm1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
 	{
 		.pa_start	= 0x48304000,
@@ -253,27 +210,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ecap2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_eqep2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ehrpwm2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3s cfg -> gpmc */
 struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
 	.master		= &am33xx_l3_s_hwmod,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index aed33621deeb..6a73b6c42c26 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -449,18 +449,6 @@ struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
 	.sysc		= &am33xx_epwmss_sysc,
 };
 
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
-	.name		= "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
-	.name		= "eqep",
-};
-
-struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
-	.name		= "ehrpwm",
-};
-
 /* epwmss0 */
 struct omap_hwmod am33xx_epwmss0_hwmod = {
 	.name		= "epwmss0",
@@ -474,30 +462,6 @@ struct omap_hwmod am33xx_epwmss0_hwmod = {
 	},
 };
 
-/* ecap0 */
-struct omap_hwmod am33xx_ecap0_hwmod = {
-	.name		= "ecap0",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep0 */
-struct omap_hwmod am33xx_eqep0_hwmod = {
-	.name		= "eqep0",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-struct omap_hwmod am33xx_ehrpwm0_hwmod = {
-	.name		= "ehrpwm0",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /* epwmss1 */
 struct omap_hwmod am33xx_epwmss1_hwmod = {
 	.name		= "epwmss1",
@@ -511,30 +475,6 @@ struct omap_hwmod am33xx_epwmss1_hwmod = {
 	},
 };
 
-/* ecap1 */
-struct omap_hwmod am33xx_ecap1_hwmod = {
-	.name		= "ecap1",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep1 */
-struct omap_hwmod am33xx_eqep1_hwmod = {
-	.name		= "eqep1",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-struct omap_hwmod am33xx_ehrpwm1_hwmod = {
-	.name		= "ehrpwm1",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /* epwmss2 */
 struct omap_hwmod am33xx_epwmss2_hwmod = {
 	.name		= "epwmss2",
@@ -548,30 +488,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = {
 	},
 };
 
-/* ecap2 */
-struct omap_hwmod am33xx_ecap2_hwmod = {
-	.name		= "ecap2",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep2 */
-struct omap_hwmod am33xx_eqep2_hwmod = {
-	.name		= "eqep2",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-struct omap_hwmod am33xx_ehrpwm2_hwmod = {
-	.name		= "ehrpwm2",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 /*
  * 'gpio' class: for gpio 0,1,2,3
  */
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index cc0791d9125b..e1c2025d6d3e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -593,17 +593,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_ls__spinlock,
 	&am33xx_l4_ls__elm,
 	&am33xx_l4_ls__epwmss0,
-	&am33xx_epwmss0__ecap0,
-	&am33xx_epwmss0__eqep0,
-	&am33xx_epwmss0__ehrpwm0,
 	&am33xx_l4_ls__epwmss1,
-	&am33xx_epwmss1__ecap1,
-	&am33xx_epwmss1__eqep1,
-	&am33xx_epwmss1__ehrpwm1,
 	&am33xx_l4_ls__epwmss2,
-	&am33xx_epwmss2__ecap2,
-	&am33xx_epwmss2__eqep2,
-	&am33xx_epwmss2__ehrpwm2,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l3_main__lcdc,
 	&am33xx_l4_ls__mcspi0,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 97fd399202dc..61f2f301d739 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -202,13 +202,6 @@ static struct omap_hwmod am43xx_epwmss3_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
-	.name		= "ehrpwm3",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_epwmss4_hwmod = {
 	.name		= "epwmss4",
 	.class		= &am33xx_epwmss_hwmod_class,
@@ -222,13 +215,6 @@ static struct omap_hwmod am43xx_epwmss4_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
-	.name		= "ehrpwm4",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_epwmss5_hwmod = {
 	.name		= "epwmss5",
 	.class		= &am33xx_epwmss_hwmod_class,
@@ -242,13 +228,6 @@ static struct omap_hwmod am43xx_epwmss5_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
-	.name		= "ehrpwm5",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
 static struct omap_hwmod am43xx_spi2_hwmod = {
 	.name		= "spi2",
 	.class		= &am33xx_spi_hwmod_class,
@@ -744,13 +723,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
-	.master		= &am43xx_epwmss3_hwmod,
-	.slave		= &am43xx_ehrpwm3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_epwmss4_hwmod,
@@ -758,13 +730,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
-	.master		= &am43xx_epwmss4_hwmod,
-	.slave		= &am43xx_ehrpwm4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_epwmss5_hwmod,
@@ -772,13 +737,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
-	.master		= &am43xx_epwmss5_hwmod,
-	.slave		= &am43xx_ehrpwm5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am43xx_spi2_hwmod,
@@ -919,11 +877,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_ls__timer10,
 	&am43xx_l4_ls__timer11,
 	&am43xx_l4_ls__epwmss3,
-	&am43xx_epwmss3__ehrpwm3,
 	&am43xx_l4_ls__epwmss4,
-	&am43xx_epwmss4__ehrpwm4,
 	&am43xx_l4_ls__epwmss5,
-	&am43xx_epwmss5__ehrpwm5,
 	&am43xx_l4_ls__mcspi2,
 	&am43xx_l4_ls__mcspi3,
 	&am43xx_l4_ls__mcspi4,
@@ -982,17 +937,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_ls__spinlock,
 	&am33xx_l4_ls__elm,
 	&am33xx_l4_ls__epwmss0,
-	&am33xx_epwmss0__ecap0,
-	&am33xx_epwmss0__eqep0,
-	&am33xx_epwmss0__ehrpwm0,
 	&am33xx_l4_ls__epwmss1,
-	&am33xx_epwmss1__ecap1,
-	&am33xx_epwmss1__eqep1,
-	&am33xx_epwmss1__ehrpwm1,
 	&am33xx_l4_ls__epwmss2,
-	&am33xx_epwmss2__ecap2,
-	&am33xx_epwmss2__eqep2,
-	&am33xx_epwmss2__ehrpwm2,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l4_ls__mcspi0,
 	&am33xx_l4_ls__mcspi1,
-- 
cgit v1.2.3


From 3b80c9bef8359e41605ff53713d47937a3a527ec Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 30 May 2016 11:23:45 +0300
Subject: ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data

The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the
sidetone only receives the ICLK from the main McBSP module.
Since the McBSP and sidetone is using the very same clock from PRCM level
the sidetone must not have the prcm section to check the clock status since
the sidetone is only used when McBSP is already configured.
If two separate hwmods looking at the same bit and they would use
pm_runtime in nested way (as it must happen with McBSP and it's ST module)
the hwmod would warn, because the idlest will not match what it is expected
after enable/disable of the clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9869a75c5d96..d72ee6185d5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1322,16 +1322,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 	.name		= "mcbsp2_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp2_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mcbsp3_sidetone */
@@ -1344,16 +1336,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
 	.name		= "mcbsp3_sidetone",
 	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
 	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
+	.main_clk	= "mcbsp3_ick",
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* SR common */
-- 
cgit v1.2.3


From 53ae95f6d5455ac1bbf50649fbd5158e0ef5f16c Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 30 May 2016 11:23:46 +0300
Subject: ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. The new callback expects to receive the *clk of the module's ick and
not the id number of the McBSP. This will allow us more cleanups and going
to simplify the ICLK handling.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 12 ++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 +
 2 files changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b4ac3af1160c..959cb4cb1062 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -48,6 +48,17 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
+static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
+{
+	if (!clk)
+		return 0;
+
+	if (force_on)
+		return omap2_clk_deny_idle(clk);
+	else
+		return omap2_clk_allow_idle(clk);
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -97,6 +108,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
 		sprintf(clk_name, "mcbsp%d_ick", id);
 		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 3c73c045f8da..73e5e832fa23 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -45,6 +45,7 @@ struct omap_mcbsp_platform_data {
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
 	int (*enable_st_clock)(unsigned int, bool);
+	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
 /**
-- 
cgit v1.2.3


From c26c84c92ba8907402faaab760dc0e4ecec89dd0 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 30 May 2016 11:23:47 +0300
Subject: ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling

McBSP2/3 module's sidetone module operates using the module's ICLK clock.
When the Sidetone is in use the interface clock of the module must not
idle. To prevent the iclk idling the driver expects to have pdata callback
to call. With this patch the callback is going to be set up for DT boot
also.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mcbsp.c                 |  9 +++++++++
 arch/arm/mach-omap2/pdata-quirks.c          | 18 ++++++++++++++++++
 include/linux/platform_data/asoc-ti-mcbsp.h |  2 ++
 3 files changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 959cb4cb1062..edf4f41c0135 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -59,6 +59,15 @@ static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 		return omap2_clk_allow_idle(clk);
 }
 
+void __init omap3_mcbsp_init_pdata_callback(
+					struct omap_mcbsp_platform_data *pdata)
+{
+	if (!pdata)
+		return;
+
+	pdata->force_ick_on = omap3_mcbsp_force_ick_on;
+}
+
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 6571ad959908..ab2b2b2b90e5 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -26,6 +26,7 @@
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/pwm_omap_dmtimer.h>
 #include <linux/platform_data/media/ir-rx51.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/dmtimer.h>
 
 #include "common.h"
@@ -505,6 +506,16 @@ static struct platform_device __maybe_unused rx51_lirc_device = {
 	},
 };
 
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+static struct omap_mcbsp_platform_data mcbsp_pdata;
+static void __init omap3_mcbsp_init(void)
+{
+	omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
+}
+#else
+static void __init omap3_mcbsp_init(void) {}
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -536,6 +547,11 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
+	/* McBSP modules with sidetone core */
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
+	OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
+#endif
 #endif
 #ifdef CONFIG_SOC_AM33XX
 	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
@@ -608,6 +624,8 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 	    of_machine_is_compatible("ti,omap3"))
 		omap_sdrc_init(NULL, NULL);
 
+	if (of_machine_is_compatible("ti,omap3"))
+		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 73e5e832fa23..5530971abf4d 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -56,4 +56,6 @@ struct omap_mcbsp_dev_attr {
 	const char *sidetone;
 };
 
+void omap3_mcbsp_init_pdata_callback(struct omap_mcbsp_platform_data *pdata);
+
 #endif
-- 
cgit v1.2.3


From 3774bec74ea7cb30b8e80c87dd64396586d645c7 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 30 May 2016 11:23:50 +0300
Subject: ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code

The new pdata callback (force_ick_on) is now used by the driver and the old
callback related code can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mcbsp.c                 | 18 ------------------
 include/linux/platform_data/asoc-ti-mcbsp.h |  1 -
 2 files changed, 19 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index edf4f41c0135..fc04be74e064 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,20 +34,6 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
-static struct clk *mcbsp_iclks[5];
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
-{
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	if (enable)
-		return omap2_clk_deny_idle(mcbsp_iclks[id]);
-	else
-		return omap2_clk_allow_idle(mcbsp_iclks[id]);
-}
-
 static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on)
 {
 	if (!clk)
@@ -75,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
-	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -116,10 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	if (oh->dev_attr) {
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
 		pdata->force_ick_on = omap3_mcbsp_force_ick_on;
-		sprintf(clk_name, "mcbsp%d_ick", id);
-		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
index 5530971abf4d..e684543254f3 100644
--- a/include/linux/platform_data/asoc-ti-mcbsp.h
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -44,7 +44,6 @@ struct omap_mcbsp_platform_data {
 	/* McBSP platform and instance specific features */
 	bool has_wakeup; /* Wakeup capability */
 	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
 	int (*force_ick_on)(struct clk *clk, bool force_on);
 };
 
-- 
cgit v1.2.3


From cab33b0e93a7601de39891ebf4abbc77a8bbe8f9 Mon Sep 17 00:00:00 2001
From: Vignesh R <vigneshr@ti.com>
Date: Mon, 16 May 2016 10:55:03 +0530
Subject: ARM: DRA7: hwmod: Remove QSPI address space entry from hwmod

QSPI address space information is passed from device tree. Therefore
remove legacy way of passing address space via hwmod data.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d0e7e5259ec3..fac0a2044da4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -3410,21 +3410,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
-	{
-		.pa_start	= 0x4b300000,
-		.pa_end		= 0x4b30007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> qspi */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_qspi_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_qspi_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-- 
cgit v1.2.3


From 05a7ac7266978bdafb0b9c1348c75ef6574b0bdc Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 7 Jun 2016 11:32:02 +0300
Subject: ARM: DRA7: hwmod: remove DSS addresses from hwmod

The addresses for DSS are provided in the DT data, so they can be
removed from the hwmod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index fac0a2044da4..1ab7096af8e2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2905,58 +2905,27 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
-	{
-		.name		= "family",
-		.pa_start	= 0x58000000,
-		.pa_end		= 0x5800007f,
-		.flags		= ADDR_TYPE_RT
-	},
-};
-
 /* l3_main_1 -> dss */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = {
-	{
-		.name		= "dispc",
-		.pa_start	= 0x58001000,
-		.pa_end		= 0x58001fff,
-		.flags		= ADDR_TYPE_RT
-	},
-};
-
 /* l3_main_1 -> dispc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_dispc_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_dispc_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = {
-	{
-		.name		= "hdmi_wp",
-		.pa_start	= 0x58040000,
-		.pa_end		= 0x580400ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> dispc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_dss_hdmi_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_dss_hdmi_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-- 
cgit v1.2.3


From ca5c098f75ec21d47f9e824d12aa11c45f2a1fe5 Mon Sep 17 00:00:00 2001
From: Petr Kulhavy <petr@barix.com>
Date: Mon, 9 May 2016 16:00:10 +0200
Subject: ARM: davinci: da850: add clocks for mcbsp0 and 1

Add clock definitions "davinci-mcbsp.0" and "davinci-mcbsp.1" in order
to make McBSP driver work on the DA850 platform.

The McBSP 0 and 1 interfaces were not defined for the DA850 platform.
Neither were the related clocks. In order to make the use of McBSP via
devicetree the clocks need to be defined.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/da850.c | 16 ++++++++++++++++
 arch/arm/mach-davinci/psc.h   |  2 ++
 2 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 239886299968..0d046accb35b 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -326,6 +326,20 @@ static struct clk mcasp_clk = {
 	.gpsc		= 1,
 };
 
+static struct clk mcbsp0_clk = {
+	.name		= "mcbsp0",
+	.parent		= &async3_clk,
+	.lpsc		= DA850_LPSC1_McBSP0,
+	.gpsc		= 1,
+};
+
+static struct clk mcbsp1_clk = {
+	.name		= "mcbsp1",
+	.parent		= &async3_clk,
+	.lpsc		= DA850_LPSC1_McBSP1,
+	.gpsc		= 1,
+};
+
 static struct clk lcdc_clk = {
 	.name		= "lcdc",
 	.parent		= &pll0_sysclk2,
@@ -482,6 +496,8 @@ static struct clk_lookup da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("davinci-mcbsp.0",	NULL,		&mcbsp0_clk),
+	CLK("davinci-mcbsp.1",	NULL,		&mcbsp1_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index 99d47cfa301f..8af9f09fc10c 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -171,6 +171,8 @@
 #define DA8XX_LPSC1_I2C			11
 #define DA8XX_LPSC1_UART1		12
 #define DA8XX_LPSC1_UART2		13
+#define DA850_LPSC1_McBSP0		14
+#define DA850_LPSC1_McBSP1		15
 #define DA8XX_LPSC1_LCDC		16
 #define DA8XX_LPSC1_PWM			17
 #define DA850_LPSC1_MMC_SD1		18
-- 
cgit v1.2.3


From ac4bbb45e9965b2f53608925eb6e6fa7d5ef8879 Mon Sep 17 00:00:00 2001
From: Jean Guyomarc'h <jean.guyomarch@openwide.fr>
Date: Mon, 23 May 2016 17:16:25 +0200
Subject: ARM: mach-imx6q: fix spelling mistake in error message

The compatible device tree node that is searched for is imx6q-iomuxc-gpr
but was misspelled imx6q-iomux-gpr in the error handling message.

Signed-off-by: Jean Guyomarc'h <jean.guyomarch@openwide.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/mach-imx6q.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index cb27d566d5ab..867121d842f7 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -220,7 +220,7 @@ static void __init imx6q_1588_init(void)
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
 				clksel);
 	else
-		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
+		pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
 
 	clk_put(enet_ref);
 put_ptp_clk:
-- 
cgit v1.2.3


From 0b37e9e8dc02ab68bfb6ba0b5153be681886abd2 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Tue, 7 Jun 2016 17:24:39 +0200
Subject: ARM: at91: debug: use DEBUG_UART_VIRT

AT91 still uses an offset (0x0100 0000) from the physical address to map
the debug UART. This is unfortunate as for some platforms (sama5d3 and
earlier), it ends up in the PCI zone and PCI is enabled in multi_v7.
Switch to DEBUG_UART_VIRT to solve that.

Tested on sama5d3 and 9g20.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/Kconfig.debug        | 11 ++++++-----
 arch/arm/include/debug/at91.S | 10 +---------
 2 files changed, 7 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 19a3dcf5eb2e..2609491f4ab1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,15 +117,15 @@ choice
 		  their output to the serial port on atmel devices.
 
 		  SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
-		  rm9200, 9260/9g20,   0xfffff200        0xfefff200       DBGU
+		  rm9200, 9260/9g20,   0xfffff200        0xf8fff200       DBGU
 		  9261/9g10, 9rl
-		  9263, 9g45, sama5d3  0xffffee00        0xfeffee00       DBGU
+		  9263, 9g45, sama5d3  0xffffee00        0xf8ffee00       DBGU
 		  sama5d4              0xfc00c000        0xfb00c000       USART3
 		  sama5d4              0xfc069000        0xfb069000       DBGU
 		  sama5d2              0xf8020000        0xf7020000       UART1
 
-		  Please adjust DEBUG_UART_PHYS configuration options based on
-		  your needs.
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_VIRT
+		  configuration options based on your needs.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -1627,7 +1627,8 @@ config DEBUG_UART_VIRT
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index d4ae3b8e2426..0098401e5aeb 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -9,14 +9,6 @@
  *
 */
 
-#ifdef CONFIG_MMU
-#define AT91_IO_P2V(x) ((x) - 0x01000000)
-#else
-#define AT91_IO_P2V(x) (x)
-#endif
-
-#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
-
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
@@ -24,7 +16,7 @@
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-- 
cgit v1.2.3


From 8b2f2d0356184cc7c409b2f046c550ce00ca8f70 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Wed, 8 Jun 2016 12:21:38 +0200
Subject: ARM: at91: debug: add default DEBUG_LL addresses

Add configuration options for the most commonly used UART physical and
virtual addresses to ease the use of DEBUG_LL and earlyprintk.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/Kconfig.debug | 58 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 44 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 2609491f4ab1..ba4003e687ac 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -109,23 +109,41 @@ choice
 		    0x80020000      | 0xf0020000     | UART8
 		    0x80024000      | 0xf0024000     | UART9
 
-	config DEBUG_AT91_UART
-		bool "Kernel low-level debugging on Atmel SoCs"
-		depends on ARCH_AT91
+	config DEBUG_AT91_RM9200_DBGU
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on atmel devices.
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 
-		  SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
-		  rm9200, 9260/9g20,   0xfffff200        0xf8fff200       DBGU
-		  9261/9g10, 9rl
-		  9263, 9g45, sama5d3  0xffffee00        0xf8ffee00       DBGU
-		  sama5d4              0xfc00c000        0xfb00c000       USART3
-		  sama5d4              0xfc069000        0xfb069000       DBGU
-		  sama5d2              0xf8020000        0xf7020000       UART1
+	config DEBUG_AT91_SAM9263_DBGU
+		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91SAM9 || SOC_SAMA5D3
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91sam9263, at91sam9g45, at91sam9m10,
+		    sama5d3
 
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_VIRT
-		  configuration options based on your needs.
+	config DEBUG_AT91_SAMA5D2_UART1
+		bool "Kernel low-level debugging on SAMA5D2 UART1"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D2
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the UART1 port of sama5d2.
+
+	config DEBUG_AT91_SAMA5D4_USART3
+		bool "Kernel low-level debugging on SAMA5D4 USART3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the USART3 port of sama5d4.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -1296,6 +1314,10 @@ choice
 
 endchoice
 
+config DEBUG_AT91_UART
+	bool
+	depends on ARCH_AT91
+
 config DEBUG_EXYNOS_UART
 	bool
 
@@ -1502,8 +1524,10 @@ config DEBUG_UART_PHYS
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe800000 if ARCH_IOP32X
@@ -1518,6 +1542,8 @@ config DEBUG_UART_PHYS
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
+	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1566,13 +1592,17 @@ config DEBUG_UART_VIRT
 				DEBUG_S3C2410_UART1)
 	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
+	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-- 
cgit v1.2.3


From 29380905565655bb797bf670a173bddb8e641da6 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Fri, 3 Jun 2016 18:31:19 +0200
Subject: ARM: imx6: disable deeper idle states when FEC is active w/o HW
 workaround

The i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from
waking the CPUs when they are in wait(unclocked) state. As the hardware
workaround isn't applicable to all boards, disable the deeper idle state
when the workaround isn't present and the FEC is in use.

This allows to safely run a kernel with CPUidle enabled on all i.MX6
boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: David S. Miller <davem@davemloft.net> (for network changes)
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 Documentation/devicetree/bindings/net/fsl-fec.txt |  3 +++
 arch/arm/mach-imx/cpuidle-imx6q.c                 | 16 +++++++++++++++
 drivers/net/ethernet/freescale/fec.h              |  2 ++
 drivers/net/ethernet/freescale/fec_main.c         | 12 +++++++++++
 include/soc/imx/cpuidle.h                         | 25 +++++++++++++++++++++++
 5 files changed, 58 insertions(+)
 create mode 100644 include/soc/imx/cpuidle.h

(limited to 'arch')

diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index b037a9d78d93..a1e3693cca16 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -27,6 +27,9 @@ Optional properties:
   number to 1.
 - fsl,magic-packet : If present, indicates that the hardware supports waking
   up via magic packet.
+- fsl,err006687-workaround-present: If present indicates that the system has
+  the hardware workaround for ERR006687 applied and does not need a software
+  workaround.
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 353bb8774112..c3cc8ca8d2ff 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -62,6 +62,22 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the
+ * CPUs when they are in wait(unclocked) state. As the hardware workaround isn't
+ * applicable to all boards, disable the deeper idle state when the workaround
+ * isn't present and the FEC is in use.
+ */
+void imx6q_cpuidle_fec_irqs_used(void)
+{
+	imx6q_cpuidle_driver.states[1].disabled = true;
+}
+
+void imx6q_cpuidle_fec_irqs_unused(void)
+{
+	imx6q_cpuidle_driver.states[1].disabled = false;
+}
+
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index f58f9ea51639..dc71a88e9c55 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -442,6 +442,8 @@ struct bufdesc_ex {
 #define FEC_QUIRK_SINGLE_MDIO		(1 << 11)
 /* Controller supports RACC register */
 #define FEC_QUIRK_HAS_RACC		(1 << 12)
+/* Interrupt doesn't wake CPU from deep idle */
+#define FEC_QUIRK_ERR006687		(1 << 13)
 
 struct bufdesc_prop {
 	int qid;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ca2cccc594fd..8c2110b61684 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -60,6 +60,7 @@
 #include <linux/if_vlan.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/prefetch.h>
+#include <soc/imx/cpuidle.h>
 
 #include <asm/cacheflush.h>
 
@@ -2820,6 +2821,9 @@ fec_enet_open(struct net_device *ndev)
 	if (ret)
 		goto err_enet_mii_probe;
 
+	if (fep->quirks & FEC_QUIRK_ERR006687)
+		imx6q_cpuidle_fec_irqs_used();
+
 	napi_enable(&fep->napi);
 	phy_start(ndev->phydev);
 	netif_tx_start_all_queues(ndev);
@@ -2855,6 +2859,9 @@ fec_enet_close(struct net_device *ndev)
 
 	phy_disconnect(ndev->phydev);
 
+	if (fep->quirks & FEC_QUIRK_ERR006687)
+		imx6q_cpuidle_fec_irqs_unused();
+
 	fec_enet_clk_enable(ndev, false);
 	pinctrl_pm_select_sleep_state(&fep->pdev->dev);
 	pm_runtime_mark_last_busy(&fep->pdev->dev);
@@ -3294,6 +3301,11 @@ fec_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ndev);
 
+	if ((of_machine_is_compatible("fsl,imx6q") ||
+	     of_machine_is_compatible("fsl,imx6dl")) &&
+	    !of_property_read_bool(np, "fsl,err006687-workaround-present"))
+		fep->quirks |= FEC_QUIRK_ERR006687;
+
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
diff --git a/include/soc/imx/cpuidle.h b/include/soc/imx/cpuidle.h
new file mode 100644
index 000000000000..986a4823bce1
--- /dev/null
+++ b/include/soc/imx/cpuidle.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2016 Pengutronix, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __SOC_IMX_CPUIDLE_H__
+#define __SOC_IMX_CPUIDLE_H__
+
+#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_SOC_IMX6Q)
+void imx6q_cpuidle_fec_irqs_used(void);
+void imx6q_cpuidle_fec_irqs_unused(void);
+#else
+void imx6q_cpuidle_fec_irqs_used(void) { }
+void imx6q_cpuidle_fec_irqs_unused(void) { }
+#endif
+
+#endif /* __SOC_IMX_CPUIDLE_H__ */
-- 
cgit v1.2.3


From 7bb84d1e66ac2130f7228b528f402ed8878fa82c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 8 Jun 2016 18:23:40 +0100
Subject: ARM: imx: fix missing includes

Fix the following warnings by adding the include files
that define them:

arch/arm/mach-imx/devices/devices.c:25:15: warning: symbol 'mxc_aips_bus' was not declared. Should it be static?
arch/arm/mach-imx/devices/devices.c:29:15: warning: symbol 'mxc_ahb_bus' was not declared. Should it be static?
arch/arm/mach-imx/devices/devices.c:33:12: warning: symbol 'mxc_device_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/devices/devices.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
index 8eab5440da28..300451727362 100644
--- a/arch/arm/mach-imx/devices/devices.c
+++ b/arch/arm/mach-imx/devices/devices.c
@@ -22,6 +22,9 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 
+#include "../common.h"
+#include "devices-common.h"
+
 struct device mxc_aips_bus = {
 	.init_name	= "mxc_aips",
 };
-- 
cgit v1.2.3


From ba4d86a64d9e7b904ef6ba181200712f33978a97 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Wed, 8 Jun 2016 18:26:17 +0100
Subject: ARM: imx: fix missing include of common.h

Fix the following warning by including ../common.h to provide
the protoype for mxc_register_gpio() :

arch/arm/mach-imx/devices/platform-gpio-mxc.c:11:24: warning: symbol 'mxc_register_gpio' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/devices/platform-gpio-mxc.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
index 26483fa94b75..cd1fe69d8807 100644
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
@@ -7,6 +7,7 @@
  * Free Software Foundation.
  */
 #include "devices-common.h"
+#include "../common.h"
 
 struct platform_device *__init mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
-- 
cgit v1.2.3


From 2cb9caa43974050c48136c51ece9edc1b0107152 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawnguo@kernel.org>
Date: Tue, 21 Jun 2016 10:30:44 +0800
Subject: ARM: imx6q: export cpuidle functions needed by fec driver

Export cpuidle functions needed by fec driver to fix the issue below
seen with fec module build.

ERROR: "imx6q_cpuidle_fec_irqs_unused" [drivers/net/ethernet/freescale/fec.ko] undefined!
ERROR: "imx6q_cpuidle_fec_irqs_used" [drivers/net/ethernet/freescale/fec.ko] undefined!

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/cpuidle-imx6q.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index c3cc8ca8d2ff..eed176e6d65e 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -72,11 +72,13 @@ void imx6q_cpuidle_fec_irqs_used(void)
 {
 	imx6q_cpuidle_driver.states[1].disabled = true;
 }
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used);
 
 void imx6q_cpuidle_fec_irqs_unused(void)
 {
 	imx6q_cpuidle_driver.states[1].disabled = false;
 }
+EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
 
 int __init imx6q_cpuidle_init(void)
 {
-- 
cgit v1.2.3


From d1e1c31ccd5a807a707c94386d5fa36d18600892 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sun, 19 Jun 2016 09:55:53 +0300
Subject: ARM: i.MX: Fix FIQ interrupt handling for TZIC

IRQ number should be translated from VIRQ to HWIRQ for TZIC.
As a solution for this issue, move existing translation code
from AVIC to common place.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/avic.c       | 19 ++++++++-----------
 arch/arm/mach-imx/irq-common.c |  6 ++++--
 arch/arm/mach-imx/tzic.c       |  6 +++---
 3 files changed, 15 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 7fa176e792bd..1afccae0420c 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -55,23 +55,20 @@ static void __iomem *avic_base;
 static struct irq_domain *domain;
 
 #ifdef CONFIG_FIQ
-static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int avic_set_irq_fiq(unsigned int hwirq, unsigned int type)
 {
-	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned int irqt;
 
-	irq = d->hwirq;
-
-	if (irq >= AVIC_NUM_IRQS)
+	if (hwirq >= AVIC_NUM_IRQS)
 		return -EINVAL;
 
-	if (irq < AVIC_NUM_IRQS / 2) {
-		irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
-		imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+	if (hwirq < AVIC_NUM_IRQS / 2) {
+		irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << hwirq);
+		imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEL);
 	} else {
-		irq -= AVIC_NUM_IRQS / 2;
-		irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
-		imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+		hwirq -= AVIC_NUM_IRQS / 2;
+		irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << hwirq);
+		imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c
index 0a920d184867..210d36eba8f2 100644
--- a/arch/arm/mach-imx/irq-common.c
+++ b/arch/arm/mach-imx/irq-common.c
@@ -33,8 +33,10 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 	gc = irq_get_chip_data(irq);
 	if (gc && gc->private) {
 		exirq = gc->private;
-		if (exirq->set_irq_fiq)
-			ret = exirq->set_irq_fiq(irq, type);
+		if (exirq->set_irq_fiq) {
+			struct irq_data *d = irq_get_irq_data(irq);
+			ret = exirq->set_irq_fiq(irqd_to_hwirq(d), type);
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index ae23d50f7861..4399abd0f11f 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -56,14 +56,14 @@ static struct irq_domain *domain;
 #define TZIC_NUM_IRQS 128
 
 #ifdef CONFIG_FIQ
-static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+static int tzic_set_irq_fiq(unsigned int hwirq, unsigned int type)
 {
 	unsigned int index, mask, value;
 
-	index = irq >> 5;
+	index = hwirq >> 5;
 	if (unlikely(index >= 4))
 		return -EINVAL;
-	mask = 1U << (irq & 0x1F);
+	mask = 1U << (hwirq & 0x1F);
 
 	value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
 	if (type)
-- 
cgit v1.2.3


From 4fdfa8623d0a3aca30da57980b14d1686c48c2d5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:22 +0100
Subject: ARM: EXYNOS: Fixup debug macros for big-endian

The exynos low-level debug macros need to be fixed if the system is being
built big endian. Add the necessary endian swaps for accessing the registers
to get output working again

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/include/debug/samsung.S | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index 8d8d922e5e44..f4eeed2a1981 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -15,11 +15,13 @@
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -28,6 +30,7 @@
 
 	.macro fifo_level_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -37,6 +40,7 @@
 
 	.macro  fifo_full_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -50,6 +54,7 @@
 
 	.macro	busyuart, rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -61,6 +66,7 @@
 1001:
 		@ busy waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -69,6 +75,7 @@
 
 	.macro	waituart,rd,rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -80,6 +87,7 @@
 1001:
 		@ idle waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
-- 
cgit v1.2.3


From f4c24f36c3e457cb727f9f548f146d805739e8e0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:23 +0100
Subject: ARM: SAMSUNG: Fixup endian issues in CPU detection

If the system is built for big endian, then the CPU identificaiton register
will be read in the wrong order. Fix this by using readl_relaxed() on the
register.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/plat-samsung/cpu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 71333bb61013..bd12a55401e0 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -29,14 +29,14 @@ EXPORT_SYMBOL(samsung_rev);
 
 void __init s3c64xx_init_cpu(void)
 {
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
 	if (!samsung_cpu_id) {
 		/*
 		 * S3C6400 has the ID register in a different place,
 		 * and needs a write before it can be read.
 		 */
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+		writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
 	}
 
 	samsung_cpu_rev = 0;
@@ -46,7 +46,7 @@ void __init s3c64xx_init_cpu(void)
 
 void __init s5p_init_cpu(void __iomem *cpuid_addr)
 {
-	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_id = readl_relaxed(cpuid_addr);
 	samsung_cpu_rev = samsung_cpu_id & 0xFF;
 
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
-- 
cgit v1.2.3


From 458ad21df1c38d229aaa4c494199168d742302ab Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:24 +0100
Subject: ARM: EXYNOS: Fixups for big-endian operation

If the kernel is built big endian, then using the __raw read and write IO
accessors is not going to work as they end up writing big-endian data to
little-endian IO registers. Fix this by using the readl and writel relaxed
versions which ensure little endian IO.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/mach-exynos/firmware.c | 18 +++++++++---------
 arch/arm/mach-exynos/headsmp.S  |  3 +++
 arch/arm/mach-exynos/platsmp.c  |  4 ++--
 3 files changed, 14 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 1bfd1b0bd9dc..fd6da5419b51 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -41,9 +41,9 @@ static int exynos_do_idle(unsigned long mode)
 	case FW_DO_IDLE_AFTR:
 		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 			exynos_save_cp15();
-		__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
-			     sysram_ns_base_addr + 0x24);
-		__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+		writel_relaxed(virt_to_phys(exynos_cpu_resume_ns),
+			       sysram_ns_base_addr + 0x24);
+		writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
 		if (soc_is_exynos3250()) {
 			flush_cache_all();
 			exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
@@ -97,7 +97,7 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	__raw_writel(boot_addr, boot_reg);
+	writel_relaxed(boot_addr, boot_reg);
 	return 0;
 }
 
@@ -113,7 +113,7 @@ static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	*boot_addr = __raw_readl(boot_reg);
+	*boot_addr = readl_relaxed(boot_reg);
 	return 0;
 }
 
@@ -234,20 +234,20 @@ void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 
 	if (mode & BOOT_MODE_MASK)
 		tmp &= ~BOOT_MODE_MASK;
 
 	tmp |= mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }
 
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 	tmp &= ~mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index b54f9701e421..d3d24ab351ae 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -12,12 +12,15 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're
  * ready for them to initialise.
  */
 ENTRY(exynos4_secondary_startup)
+ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	and	r0, r0, #15
 	adr	r4, 1f
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 85c3be63d644..98ffe1e62ad5 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -264,7 +264,7 @@ int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		__raw_writel(boot_addr, boot_reg);
+		writel_relaxed(boot_addr, boot_reg);
 		ret = 0;
 	}
 fail:
@@ -289,7 +289,7 @@ int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		*boot_addr = __raw_readl(boot_reg);
+		*boot_addr = readl_relaxed(boot_reg);
 		ret = 0;
 	}
 fail:
-- 
cgit v1.2.3


From d0ceee0b4d63d5a31e8ada86f7d07806b0ad6585 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:25 +0100
Subject: ARM: EXYNOS: Fixup endian in pm/pmu

Fix the PMU code endian access code to deal with kernels built for big endian
operation.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/mach-exynos/common.h     | 4 ++--
 arch/arm/mach-exynos/pm.c         | 6 +++---
 arch/arm/mach-exynos/pm_domains.c | 6 +++---
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 5365bf1f586a..19e9d25d44ec 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -174,12 +174,12 @@ extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
 
 static inline void pmu_raw_writel(u32 val, u32 offset)
 {
-	__raw_writel(val, pmu_base_addr + offset);
+	writel_relaxed(val, pmu_base_addr + offset);
 }
 
 static inline u32 pmu_raw_readl(u32 offset)
 {
-	return __raw_readl(pmu_base_addr + offset);
+	return readl_relaxed(pmu_base_addr + offset);
 }
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index c43b776a51a3..487295f4a56b 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -132,9 +132,9 @@ static void exynos_set_wakeupmask(long mask)
 
 static void exynos_cpu_set_boot_vector(long flags)
 {
-	__raw_writel(virt_to_phys(exynos_cpu_resume),
-		     exynos_boot_vector_addr());
-	__raw_writel(flags, exynos_boot_vector_flag());
+	writel_relaxed(virt_to_phys(exynos_cpu_resume),
+		       exynos_boot_vector_addr());
+	writel_relaxed(flags, exynos_boot_vector_flag());
 }
 
 static int exynos_aftr_finisher(unsigned long flags)
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 875a2bab64f6..0e075d96ccd4 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -70,12 +70,12 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 	}
 
 	pwr = power_on ? INT_LOCAL_PWR_EN : 0;
-	__raw_writel(pwr, base);
+	writel_relaxed(pwr, base);
 
 	/* Wait max 1ms */
 	timeout = 10;
 
-	while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
+	while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
 		if (!timeout) {
 			op = (power_on) ? "enable" : "disable";
 			pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -185,7 +185,7 @@ static __init int exynos4_pm_init_power_domain(void)
 			clk_put(pd->oscclk);
 
 no_clk:
-		on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
+		on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN;
 
 		pm_genpd_init(&pd->pd, NULL, !on);
 		of_genpd_add_provider_simple(np, &pd->pd);
-- 
cgit v1.2.3


From 8558643d03f0736a43edd1b95a2c81037e8ac6e3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:27 +0100
Subject: ARM: SAMSUNG: Fixup usage of __raw IO in PM

Fix the use of __raw accesors in pm-common.c to use the _relaxed
variants to deal with any issues due to endian related fetches.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/plat-samsung/pm-common.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c
index 515cd53372bd..6534c3ff9fe2 100644
--- a/arch/arm/plat-samsung/pm-common.c
+++ b/arch/arm/plat-samsung/pm-common.c
@@ -31,7 +31,7 @@
 void s3c_pm_do_save(struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
+		ptr->val = readl_relaxed(ptr->reg);
 		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
 	}
 }
@@ -51,9 +51,9 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
 		pr_debug("restore %p (restore %08lx, was %08x)\n",
-				ptr->reg, ptr->val, __raw_readl(ptr->reg));
+				ptr->reg, ptr->val, readl_relaxed(ptr->reg));
 
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 	}
 }
 
@@ -71,5 +71,5 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 }
-- 
cgit v1.2.3


From 17e0645e6ba7d7e65ec3f3e77200caf13f57d776 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 11:20:28 +0100
Subject: ARM: EXYNOS: Fixup for __raw operations in suspend.c

Fix the PMU code endian access code to deal with kernels built for
big endian operation by changing the __raw IO accessors to the
_relaxed variants.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/mach-exynos/suspend.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index f21690937b7d..3750575c73c5 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -301,7 +301,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	__raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
@@ -373,8 +373,8 @@ static void exynos5420_pm_prepare(void)
 	 * needs to restore it back in case, the primary cpu fails to
 	 * suspend for any reason.
 	 */
-	exynos5420_cpu_state = __raw_readl(sysram_base_addr +
-						EXYNOS5420_CPU_STATE);
+	exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
+					     EXYNOS5420_CPU_STATE);
 
 	exynos_pm_enter_sleep_mode();
 
@@ -504,11 +504,11 @@ static void exynos5420_pm_resume(void)
 	/* Restore the CPU0 low power state register */
 	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
-		EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+		       EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 
 	/* Restore the sysram cpu state register */
-	__raw_writel(exynos5420_cpu_state,
-		sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(exynos5420_cpu_state,
+		       sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
 			S5P_CENTRAL_SEQ_OPTION);
-- 
cgit v1.2.3


From 47096103ef03b273db250f7ba0fad001767f0c9d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 13:13:11 +0100
Subject: ARM: imx6: fix missing <soc/imx/cpuidle.h> in cpuidle-imx6q.c

The <soc/imx/cpuidle.h> file has declarations of two funcitons
exported from cpuidle-imx6q.c but it is not included. Fix the
following warnings by adding the include:

arch/arm/mach-imx/cpuidle-imx6q.c:71:6: warning: symbol 'imx6q_cpuidle_fec_irqs_used' was not declared. Should it be static?
arch/arm/mach-imx/cpuidle-imx6q.c:76:6: warning: symbol 'imx6q_cpuidle_fec_irqs_unused' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/cpuidle-imx6q.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index eed176e6d65e..db0f48c4b17e 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -10,6 +10,8 @@
 #include <linux/module.h>
 #include <asm/cpuidle.h>
 
+#include <soc/imx/cpuidle.h>
+
 #include "common.h"
 #include "cpuidle.h"
 #include "hardware.h"
-- 
cgit v1.2.3


From ab6778eee51b72f2dae79763bf918e3d43331c12 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Fri, 17 Jun 2016 16:34:18 +0100
Subject: ARM: at91: fix warnings in pm.c

Fix a pair of missing statics on un-exported functions and
include <linux/platform_data/atmel.h> to provide the declaration
of at91_suspend_entering_slow_clock() to fix the following
sparse warnings:

arch/arm/mach-at91/pm.c:127:5: warning: symbol 'at91_suspend_entering_slow_clock' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:358:6: warning: symbol 'at91rm9200_idle' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:367:6: warning: symbol 'at91sam9_idle' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f06270198bf1..b4332b727e9c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -22,6 +22,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
 #include <linux/io.h>
 #include <linux/clk/at91_pmc.h>
 
@@ -355,7 +356,7 @@ static __init void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
-void at91rm9200_idle(void)
+static void at91rm9200_idle(void)
 {
 	/*
 	 * Disable the processor clock.  The processor will be automatically
@@ -364,7 +365,7 @@ void at91rm9200_idle(void)
 	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
 }
 
-void at91sam9_idle(void)
+static void at91sam9_idle(void)
 {
 	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
 	cpu_do_idle();
-- 
cgit v1.2.3


From 39a5cbbc0e24586fc30af9ebfc9957c00f1c9f3b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 09:31:15 -0700
Subject: ARM: keystone: fix missing keystone.h in pm_domain.c

The declaration of keystone_pm_runtime_init() is not included
from keystone.h in pm_domain.c. Including the file fixes the
following sparse warning:

arch/arm/mach-keystone/pm_domain.c:37:12: warning: symbol 'keystone_pm_runtime_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
---
 arch/arm/mach-keystone/pm_domain.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
index e283939a216f..8cbb35765a19 100644
--- a/arch/arm/mach-keystone/pm_domain.c
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
+#include "keystone.h"
+
 static struct dev_pm_domain keystone_pm_domain = {
 	.ops = {
 		USE_PM_CLK_RUNTIME_OPS
-- 
cgit v1.2.3


From 2f3428b5cf9ba4255d8729fd249cbfb8a540d33e Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Fri, 26 Sep 2014 19:43:54 +0900
Subject: ARM: EXYNOS: Fix UART address selection for DEBUG_LL

The Exynos542x SoCs using A15+A7 can boot to A15 or A7. If it boots using
A7 (like on Odroid XU family boards), it can't choose right UART
physical address only the part number of CP15. Fix the detection logic
by checking the Cluster ID additionally.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.kozlowski: Extend commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/include/debug/exynos.S | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
index b17fdb7fbd34..60bf3c23200d 100644
--- a/arch/arm/include/debug/exynos.S
+++ b/arch/arm/include/debug/exynos.S
@@ -24,7 +24,11 @@
 		mrc	p15, 0, \tmp, c0, c0, 0
 		and	\tmp, \tmp, #0xf0
 		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-- 
cgit v1.2.3


From b00ccf5b684992829610d162e78a7836933a1b19 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Mon, 20 Jun 2016 09:22:25 +0530
Subject: ARM: AM43XX: hwmod: Fix RSTST register offset for pruss

pruss hwmod RSTST register wrongly points to PWRSTCTRL register in case of
am43xx. Fix the RSTST register offset value.

This can lead to setting of wrong power state values for PER domain.

Fixes: 1c7e224d ("ARM: OMAP2+: hwmod: AM335x: runtime register update")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 1 +
 arch/arm/mach-omap2/prcm43xx.h                          | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 6a73b6c42c26..55c5878577f4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -1392,6 +1392,7 @@ static void omap_hwmod_am43xx_rst(void)
 {
 	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
 	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET);
 	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7c34c44eb0ae..babb5db5a3a4 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -39,6 +39,7 @@
 
 /* RM RSTST offsets */
 #define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_PER_RSTST_OFFSET			0x0014
 #define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
 
 /* CM instances */
-- 
cgit v1.2.3


From 41dc54830d095a8160644ca13e0d13513a48be39 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 13:47:16 +0100
Subject: ARM: OMAP: make ti81xx_rtc_hwmod static

The ti81xx_rtc_hwmod is not exported, or declared outside the file
arch/arm/mach-omap2/omap_hwmod_81xx_data.c so make it static to
avoid the following warning:

arch/arm/mach-omap2/omap_hwmod_81xx_data.c:246:19: warning: symbol 'ti81xx_rtc_hwmod' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index df8327713d06..b82b77cff24c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -243,7 +243,7 @@ static struct omap_hwmod_class ti81xx_rtc_hwmod_class = {
 	.sysc		= &ti81xx_rtc_sysc,
 };
 
-struct omap_hwmod ti81xx_rtc_hwmod = {
+static struct omap_hwmod ti81xx_rtc_hwmod = {
 	.name		= "rtc",
 	.class		= &ti81xx_rtc_hwmod_class,
 	.clkdm_name	= "alwon_l3s_clkdm",
-- 
cgit v1.2.3


From d3221cc6358cf9178bf4178e29241ebaa4485318 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 13:20:53 +0100
Subject: ARM: SAMSUNG: Fix missing s5p_init_cpu() declaration

The declaration of s5p_init_cpu() in arch/arm/mach-exynos/common.h
is not included in the platform file arch/arm/plat-samsung/cpu.c
which generates a warning.

Fix the following warning by moving the declaration to somewhere
both the machine and platform code can get to it, and including
the right files as necessary:

arch/arm/plat-samsung/cpu.c:47:13: warning: symbol 's5p_init_cpu' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/mach-exynos/common.h            | 1 -
 arch/arm/mach-exynos/exynos.c            | 1 +
 arch/arm/plat-samsung/include/plat/cpu.h | 1 +
 3 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 19e9d25d44ec..9424a8a9f308 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -166,7 +166,6 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
 extern void exynos_set_delayed_reset_assertion(bool enable);
 
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 extern void exynos_core_restart(u32 core_id);
 extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 52ccf247e079..bdaf81c46d74 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -25,6 +25,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <plat/cpu.h>
 
 #include "common.h"
 #include "mfc.h"
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 61d14f3a0426..4f8a6221dc6d 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -113,6 +113,7 @@ extern void s3c_init_cpu(unsigned long idcode,
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 
-- 
cgit v1.2.3


From 218092afa0a555979bf5fc8f0e613f324d1287db Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@ti.com>
Date: Wed, 22 Jun 2016 03:33:25 -0700
Subject: ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain

As per the TRM: http://www.ti.com/lit/ug/spruh73m/spruh73m.pdf
offset 0x4 is reserved for PRM_PER. Hence removing the wrongly
defined address offset.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/prm33xx.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 2bc4ec52ba78..66302c6aba61 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -52,8 +52,6 @@
 /* PRM.PER_PRM register offsets */
 #define AM33XX_RM_PER_RSTCTRL_OFFSET		0x0000
 #define AM33XX_RM_PER_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
-#define AM33XX_RM_PER_RSTST_OFFSET		0x0004
-#define AM33XX_RM_PER_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004)
 #define AM33XX_PM_PER_PWRSTST_OFFSET		0x0008
 #define AM33XX_PM_PER_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
 #define AM33XX_PM_PER_PWRSTCTRL_OFFSET		0x000c
-- 
cgit v1.2.3


From f4b9f40ae95bad3df68d4a9b275714ef04abb1b5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 22 Jun 2016 01:59:39 -0700
Subject: ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for
 kexec

Prepare things for making kexec work on SMP omap variants by initializing
SARM RAM base early. This allows us to configure CPU1 for kexec in case
the previous kernel has put CPU1 in low power mode.

Note that this should not prevent moving other SAR RAM code to live
under drivers. However for kexec, we will need this very early.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/common.h       |  1 +
 arch/arm/mach-omap2/io.c           |  2 ++
 arch/arm/mach-omap2/omap4-common.c | 14 ++++++--------
 3 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f7666b9f3b21..9cbae6e059a3 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -257,6 +257,7 @@ extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);
 extern void gic_timer_retrigger(void);
 extern void omap_smc1(u32 fn, u32 arg);
+extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap_do_wfi(void);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 49de4dd227be..4548cb9f673e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -690,6 +690,7 @@ void __init omap4430_init_early(void)
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
+	omap4_sar_ram_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
@@ -718,6 +719,7 @@ void __init omap5_init_early(void)
 	omap4_pm_init_early();
 	omap2_prcm_base_init();
 	omap5xxx_check_revision();
+	omap4_sar_ram_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index fb6fe26a8f8f..cf65ab8bb004 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -266,10 +266,11 @@ void __iomem *omap4_get_sar_ram_base(void)
 }
 
 /*
- * SAR RAM used to save and restore the HW
- * context in low power modes
+ * SAR RAM used to save and restore the HW context in low power modes.
+ * Note that we need to initialize this very early for kexec. See
+ * omap4_mpuss_early_init().
  */
-static int __init omap4_sar_ram_init(void)
+void __init omap4_sar_ram_init(void)
 {
 	unsigned long sar_base;
 
@@ -282,16 +283,13 @@ static int __init omap4_sar_ram_init(void)
 	else if (soc_is_omap54xx())
 		sar_base = OMAP54XX_SAR_RAM_BASE;
 	else
-		return -ENOMEM;
+		return;
 
 	/* Static mapping, never released */
 	sar_ram_base = ioremap(sar_base, SZ_16K);
 	if (WARN_ON(!sar_ram_base))
-		return -ENOMEM;
-
-	return 0;
+		return;
 }
-omap_early_initcall(omap4_sar_ram_init);
 
 static const struct of_device_id intc_match[] = {
 	{ .compatible = "ti,omap4-wugen-mpu", },
-- 
cgit v1.2.3


From 0573b957fc21c6a6cee01fdb08c1f7ce556afbac Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 22 Jun 2016 01:59:39 -0700
Subject: ARM: OMAP4+: Prevent CPU1 related hang with kexec

Kexec booted kernels on omap4 will hang early during the boot if the
booted kernel is different version from the previous kernel.

This is because the previous kernel may have configured low-power mode
using CPU1_WAKEUP_NS_PA_ADDR. In that case it points to the previous
kernel's omap4_secondary_startup(), and CPU1 can be in low power mode
from the previous kernel. When the new kernel configures the CPU1
clockdomain, CPU1 can wake from low power state prematurely during
omap44xx_clockdomains_init() running random code.

Let's fix the issue by configuring CPU1_WAKEUP_NS_PA_ADDR before we
call omap44xx_clockdomains_init(). Note that this is very early during
the init, and we will do proper CPU1 reset during SMP init a bit later
on in omap4_smp_prepare_cpus(). And we need to do this when SMP is
not enabled as the previous kernel may have had it enabled.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile              |  4 ++--
 arch/arm/mach-omap2/common.h              |  6 ++++--
 arch/arm/mach-omap2/io.c                  |  1 +
 arch/arm/mach-omap2/omap-mpuss-lowpower.c | 29 +++++++++++++++++++++++++----
 4 files changed, 32 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 04e276ce8413..cd820f5df028 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -8,7 +8,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o sram.o drm.o
+	 omap_device.o omap-headsmp.o sram.o drm.o
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
@@ -32,7 +32,7 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
-smp-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+smp-$(CONFIG_SMP)			+= omap-smp.o
 smp-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 9cbae6e059a3..0136405a465f 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -259,12 +259,14 @@ extern void gic_timer_retrigger(void);
 extern void omap_smc1(u32 fn, u32 arg);
 extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
+extern void omap4_mpuss_early_init(void);
 extern void omap_do_wfi(void);
 
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
 extern void omap4_secondary_startup(void);
 extern void omap4460_secondary_startup(void);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4548cb9f673e..0e9acdd95d70 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -691,6 +691,7 @@ void __init omap4430_init_early(void)
 	omap4xxx_check_features();
 	omap2_prcm_base_init();
 	omap4_sar_ram_init();
+	omap4_mpuss_early_init();
 	omap4_pm_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 65024af169d3..17515179e6ae 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -62,6 +62,8 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 
+static void __iomem *sar_base;
+
 #ifdef CONFIG_SMP
 
 struct omap4_cpu_pm_info {
@@ -90,7 +92,6 @@ struct cpu_pm_ops {
 
 static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
 static struct powerdomain *mpuss_pd;
-static void __iomem *sar_base;
 static u32 cpu_context_offset;
 
 static int default_finish_suspend(unsigned long cpu_state)
@@ -366,9 +367,6 @@ int __init omap4_mpuss_init(void)
 		return -ENODEV;
 	}
 
-	if (cpu_is_omap44xx())
-		sar_base = omap4_get_sar_ram_base();
-
 	/* Initilaise per CPU PM information */
 	pm_info = &per_cpu(omap4_pm_info, 0x0);
 	if (sar_base) {
@@ -444,3 +442,26 @@ int __init omap4_mpuss_init(void)
 }
 
 #endif
+
+/*
+ * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
+ * current kernel's secondary_startup() early before
+ * clockdomains_init(). Otherwise clockdomain_init() can
+ * wake CPU1 and cause a hang.
+ */
+void __init omap4_mpuss_early_init(void)
+{
+	unsigned long startup_pa;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	sar_base = omap4_get_sar_ram_base();
+
+	if (cpu_is_omap443x())
+		startup_pa = virt_to_phys(omap4_secondary_startup);
+	else
+		startup_pa = virt_to_phys(omap4460_secondary_startup);
+
+	writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET);
+}
-- 
cgit v1.2.3


From 3251885285e15e4b0ff1b0501a49380b24204f35 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 22 Jun 2016 01:59:40 -0700
Subject: ARM: OMAP4+: Reset CPU1 properly for kexec

We need to reset CPU1 properly for kexec when booting different
kernel versions. Otherwise CPU1 will attempt to boot the the
previous kernel's start_secondary(). Note that the restctrl
register is different from the low-power mode wakeup register
CPU1_WAKEUP_NS_PA_ADDR. We need to configure both.

Let's fix the issue by defining SoC specific data to initialize
things in a more generic way. And let's also standardize omap-smp.c
to use soc_is instead of cpu_is while at it.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap-smp.c | 96 ++++++++++++++++++++++++++++++------------
 1 file changed, 70 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8cd1de914ee4..d53a0def2d6c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -40,14 +40,35 @@
 
 #define OMAP5_CORE_COUNT	0x2
 
-/* SCU base address */
-static void __iomem *scu_base;
+struct omap_smp_config {
+	unsigned long cpu1_rstctrl_pa;
+	void __iomem *cpu1_rstctrl_va;
+	void __iomem *scu_base;
+	void *startup_addr;
+};
+
+static struct omap_smp_config cfg;
+
+static const struct omap_smp_config omap443x_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x4824380c,
+	.startup_addr = omap4_secondary_startup,
+};
+
+static const struct omap_smp_config omap446x_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x4824380c,
+	.startup_addr = omap4460_secondary_startup,
+};
+
+static const struct omap_smp_config omap5_cfg __initconst = {
+	.cpu1_rstctrl_pa = 0x48243810,
+	.startup_addr = omap5_secondary_startup,
+};
 
 static DEFINE_SPINLOCK(boot_lock);
 
 void __iomem *omap4_get_scu_base(void)
 {
-	return scu_base;
+	return cfg.scu_base;
 }
 
 #ifdef CONFIG_OMAP5_ERRATA_801819
@@ -93,7 +114,7 @@ static void omap4_secondary_init(unsigned int cpu)
 	 * OMAP443X GP devices- SMP bit isn't accessible.
 	 * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
 	 */
-	if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+	if (soc_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
 		omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
 							4, 0, 0, 0, 0, 0);
 
@@ -222,9 +243,9 @@ static void __init omap4_smp_init_cpus(void)
 		 * Currently we can't call ioremap here because
 		 * SoC detection won't work until after init_early.
 		 */
-		scu_base =  OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
-		BUG_ON(!scu_base);
-		ncores = scu_get_core_count(scu_base);
+		cfg.scu_base =  OMAP2_L4_IO_ADDRESS(scu_a9_get_base());
+		BUG_ON(!cfg.scu_base);
+		ncores = scu_get_core_count(cfg.scu_base);
 	} else if (cpu_id == CPU_CORTEX_A15) {
 		ncores = OMAP5_CORE_COUNT;
 	}
@@ -242,20 +263,51 @@ static void __init omap4_smp_init_cpus(void)
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void *startup_addr = omap4_secondary_startup;
 	void __iomem *base = omap_get_wakeupgen_base();
+	const struct omap_smp_config *c = NULL;
+
+	if (soc_is_omap443x())
+		c = &omap443x_cfg;
+	else if (soc_is_omap446x())
+		c = &omap446x_cfg;
+	else if (soc_is_dra74x() || soc_is_omap54xx())
+		c = &omap5_cfg;
+
+	if (!c) {
+		pr_err("%s Unknown SMP SoC?\n", __func__);
+		return;
+	}
+
+	/* Must preserve cfg.scu_base set earlier */
+	cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa;
+	cfg.startup_addr = c->startup_addr;
+
+	if (soc_is_dra74x() || soc_is_omap54xx()) {
+		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+			cfg.startup_addr = omap5_secondary_hyp_startup;
+		omap5_erratum_workaround_801819();
+	}
+
+	cfg.cpu1_rstctrl_va = ioremap(cfg.cpu1_rstctrl_pa, 4);
+	if (!cfg.cpu1_rstctrl_va)
+		return;
 
 	/*
 	 * Initialise the SCU and wake up the secondary core using
 	 * wakeup_secondary().
 	 */
-	if (scu_base)
-		scu_enable(scu_base);
+	if (cfg.scu_base)
+		scu_enable(cfg.scu_base);
 
-	if (cpu_is_omap446x())
-		startup_addr = omap4460_secondary_startup;
-	if (soc_is_dra74x() || soc_is_omap54xx())
-		omap5_erratum_workaround_801819();
+	/*
+	 * Reset CPU1 before configuring, otherwise kexec will
+	 * end up trying to use old kernel startup address.
+	 */
+	if (cfg.cpu1_rstctrl_va) {
+		writel_relaxed(1, cfg.cpu1_rstctrl_va);
+		readl_relaxed(cfg.cpu1_rstctrl_va);
+		writel_relaxed(0, cfg.cpu1_rstctrl_va);
+	}
 
 	/*
 	 * Write the address of secondary startup routine into the
@@ -264,19 +316,10 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
-		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
+		omap_auxcoreboot_addr(virt_to_phys(cfg.startup_addr));
 	else
-		/*
-		 * If the boot CPU is in HYP mode then start secondary
-		 * CPU in HYP mode as well.
-		 */
-		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
-			writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
-				       base + OMAP_AUX_CORE_BOOT_1);
-		else
-			writel_relaxed(virt_to_phys(omap5_secondary_startup),
-				       base + OMAP_AUX_CORE_BOOT_1);
-
+		writel_relaxed(virt_to_phys(cfg.startup_addr),
+			       base + OMAP_AUX_CORE_BOOT_1);
 }
 
 const struct smp_operations omap4_smp_ops __initconst = {
@@ -286,5 +329,6 @@ const struct smp_operations omap4_smp_ops __initconst = {
 	.smp_boot_secondary	= omap4_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= omap4_cpu_die,
+	.cpu_kill		= omap4_cpu_kill,
 #endif
 };
-- 
cgit v1.2.3


From 3696203c47544f126fe6f0edd6e88e5cc90e7f34 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 22 Jun 2016 02:05:12 -0700
Subject: ARM: OMAP4+: Allow kexec on SMP variants

Kexec needs omap4_cpu_kill, otherwise kexec will produce on SMP:

kexec_load failed: Invalid argument

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/common.h       | 1 +
 arch/arm/mach-omap2/omap-hotplug.c | 6 ++++++
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 0136405a465f..deed42e1dd9c 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -272,6 +272,7 @@ extern void omap_auxcoreboot_addr(u32 cpu_addr);
 extern u32 omap_read_auxcoreboot0(void);
 
 extern void omap4_cpu_die(unsigned int cpu);
+extern int omap4_cpu_kill(unsigned int cpu);
 
 extern const struct smp_operations omap4_smp_ops;
 
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 593fec753b28..d3fb5661bb5d 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -64,3 +64,9 @@ void omap4_cpu_die(unsigned int cpu)
 		pr_debug("CPU%u: spurious wakeup call\n", cpu);
 	}
 }
+
+/* Needed by kexec and platform_can_cpu_hotplug() */
+int omap4_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
-- 
cgit v1.2.3


From 6bce5efd442488434a317a25c5482fcd5a66bb0f Mon Sep 17 00:00:00 2001
From: Petr Kulhavy <petr@barix.com>
Date: Mon, 9 May 2016 15:59:48 +0200
Subject: ARM: davinci: remove unused davinci-i2s pdata

The davinci-i2s driver ("davinci-mcbsp") does not use platform
data any longer. Remove the dummy pdata provided by the board
drivers dm355, dm365, dm644x and neuros-osd2.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c   | 4 +---
 arch/arm/mach-davinci/board-dm365-evm.c   | 6 +-----
 arch/arm/mach-davinci/board-dm644x-evm.c  | 4 +---
 arch/arm/mach-davinci/board-neuros-osd2.c | 4 +---
 arch/arm/mach-davinci/davinci.h           | 6 +++---
 arch/arm/mach-davinci/dm355.c             | 3 +--
 arch/arm/mach-davinci/dm365.c             | 3 +--
 arch/arm/mach-davinci/dm644x.c            | 3 +--
 8 files changed, 10 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 1844076f6403..18296a99c4d2 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -115,8 +115,6 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.scl_pin        = 14,
 };
 
-static struct snd_platform_data dm355_evm_snd_data;
-
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -411,7 +409,7 @@ static __init void dm355_evm_init(void)
 			ARRAY_SIZE(dm355_evm_spi_info));
 
 	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index f073518f621a..e832949bc767 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -176,10 +176,6 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
-	.asp_chan_q = EVENTQ_3,
-};
-
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -763,7 +759,7 @@ static __init void dm365_evm_init(void)
 	evm_init_cpld();
 
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
-	dm365_init_asp(&dm365_evm_snd_data);
+	dm365_init_asp();
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
 	dm365_init_vc(&dm365_evm_snd_data);
 #endif
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 68cc09907828..96a9528e373e 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -264,8 +264,6 @@ static struct platform_device rtc_dev = {
 	.id             = -1,
 };
 
-static struct snd_platform_data dm644x_evm_snd_data;
-
 /*----------------------------------------------------------------------*/
 #ifdef CONFIG_I2C
 /*
@@ -799,7 +797,7 @@ static __init void davinci_evm_init(void)
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp(&dm644x_evm_snd_data);
+	dm644x_init_asp();
 
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 8fcdcf87c47c..ad10017203c1 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -127,8 +127,6 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
-static struct snd_platform_data dm644x_ntosd2_snd_data;
-
 static struct gpio_led ntosd2_leds[] = {
 	{ .name = "led1_green", .gpio = GPIO(10), },
 	{ .name = "led1_red",   .gpio = GPIO(11), },
@@ -200,7 +198,7 @@ static __init void davinci_ntosd2_init(void)
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
 	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp(&dm644x_ntosd2_snd_data);
+	dm644x_init_asp();
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 4ffc37accce0..d1f8e29f1e30 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -85,13 +85,13 @@ int davinci_init_wdt(void);
 void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_init_asp1(u32 evt_enable);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
 int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
-void dm365_init_asp(struct snd_platform_data *pdata);
+void dm365_init_asp(void);
 void dm365_init_vc(struct snd_platform_data *pdata);
 void dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void dm365_init_rtc(void);
@@ -102,7 +102,7 @@ int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
-void dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_init_asp(void);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
 int dm644x_gpio_register(void);
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 5a19cca7ed6a..d33322ddedab 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1035,7 +1035,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+void __init dm355_init_asp1(u32 evt_enable)
 {
 	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
 	if (evt_enable & ASP1_TX_EVT_EN)
@@ -1044,7 +1044,6 @@ void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
 	if (evt_enable & ASP1_RX_EVT_EN)
 		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
 
-	dm355_asp1_device.dev.platform_data = pdata;
 	platform_device_register(&dm355_asp1_device);
 }
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 8aa004b02fe9..95fbfd962c79 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1138,7 +1138,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.sram_len		= SZ_32K,
 };
 
-void __init dm365_init_asp(struct snd_platform_data *pdata)
+void __init dm365_init_asp(void)
 {
 	davinci_cfg_reg(DM365_MCBSP0_BDX);
 	davinci_cfg_reg(DM365_MCBSP0_X);
@@ -1148,7 +1148,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 	davinci_cfg_reg(DM365_MCBSP0_BFSR);
 	davinci_cfg_reg(DM365_EVT2_ASP_TX);
 	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	dm365_asp_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_asp_device);
 }
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0afa279ec460..b437c3730f65 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -921,10 +921,9 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
-void __init dm644x_init_asp(struct snd_platform_data *pdata)
+void __init dm644x_init_asp(void)
 {
 	davinci_cfg_reg(DM644X_MCBSP);
-	dm644x_asp_device.dev.platform_data = pdata;
 	platform_device_register(&dm644x_asp_device);
 }
 
-- 
cgit v1.2.3


From 78700c0a2102dbe0fb35b6c146a639dc4622036f Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Fri, 17 Jun 2016 12:31:23 +0200
Subject: ARM: qcom: Add support for MDM9615

Add support for Qualcomm MDM9615 in Kconfig and in DT match list.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
 arch/arm/mach-qcom/Kconfig | 4 ++++
 arch/arm/mach-qcom/board.c | 1 +
 2 files changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 73494500b51c..46ed10a807f0 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -23,4 +23,8 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
+config ARCH_MDM9615
+	bool "Enable support for MDM9615"
+	select CLKSRC_QCOM
+
 endif
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index 6d8bbf7d39d8..d8060dfd1a21 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = {
 	"qcom,ipq8064",
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
+	"qcom,mdm9615",
 	NULL
 };
 
-- 
cgit v1.2.3


From 463f90fa8a12bcca4a4a4c686a1d140da816b1bc Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 25 Jun 2016 08:26:15 +0300
Subject: ARM: i.MX: Disable supervisor protect for i.MX51

Most peripherals on the i.MX51 have an Off-Platform Peripheral Access
Control Register (OPACR) in which the access rights (together with the
MPROT registers) can be declared.
However, this does not seem to work for example for SSI1+SDMA, because the
supervisor bit is not set for the SDMA unit.
A similar problem was described in the patch for i.MX53 CPU
(ARM: i.MX53: globally disable supervisor protect), and the same solution
is applicable for i.MX51 CPU.
Patch has tested on custom board based on Digi CCMX-51 module (i.MX51).

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/mach-imx51.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 10a82a4f1e58..1e91740ac7ae 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -54,6 +54,8 @@ static void __init imx51_dt_init(void)
 	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	imx_aips_allow_unprivileged_access("fsl,imx51-aipstz");
 }
 
 static void __init imx51_init_late(void)
-- 
cgit v1.2.3


From 18245c24259acaea4584464bf0215bf413dc7d23 Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan@agner.ch>
Date: Sun, 26 Jun 2016 01:47:51 -0700
Subject: ARM: imx: add support for i.MX 7Solo

Add device tree compatible string "imx7s" for i.MX 7Solo.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/mach-imx/mach-imx7d.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index b450f525a670..36254a621e45 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -107,6 +107,7 @@ static void __init imx7d_init_irq(void)
 
 static const char *const imx7d_dt_compat[] __initconst = {
 	"fsl,imx7d",
+	"fsl,imx7s",
 	NULL,
 };
 
-- 
cgit v1.2.3


From 44e7475d40eb26b8d3a6e2b2f7a5f12a5fe0942e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 27 Jun 2016 23:30:02 -0700
Subject: ARM: OMAP2+: Fix build if CONFIG_SMP is not set

Looks like I only partially fixed up things if CONFIG_SMP
is not set for the recent kexec changes. We don't have
boot_secondary available without SMP as reported by Arnd.

Fixes: 0573b957fc21 ("ARM: OMAP4+: Prevent CPU1 related hang with kexec")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap-headsmp.S | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 6d1dffca6c7b..fe36ce2734d4 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -24,6 +24,16 @@
 #define AUX_CORE_BOOT0_PA			0x48281800
 #define API_HYP_ENTRY				0x102
 
+ENTRY(omap_secondary_startup)
+#ifdef CONFIG_SMP
+	b	secondary_startup
+#else
+/* Should never get here */
+again:	wfi
+	b	again
+#endif
+#ENDPROC(omap_secondary_startup)
+
 /*
  * OMAP5 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
@@ -39,7 +49,7 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	and	r4, r4, #0x0f
 	cmp	r0, r4
 	bne	wait
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap5_secondary_startup)
 /*
  * Same as omap5_secondary_startup except we call into the ROM to
@@ -59,7 +69,7 @@ wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	adr	r0, hyp_boot
 	smc	#0
 hyp_boot:
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap5_secondary_hyp_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
@@ -82,7 +92,7 @@ hold:	ldr	r12,=0x103
 	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap4_secondary_startup)
 
 ENTRY(omap4460_secondary_startup)
@@ -119,5 +129,5 @@ hold_2:	ldr	r12,=0x103
 	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
-	b	secondary_startup
+	b	omap_secondary_startup
 ENDPROC(omap4460_secondary_startup)
-- 
cgit v1.2.3


From 09ca62f5d72ad6a7496e83d4f65d7e33adfb7eee Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue, 21 Jun 2016 13:28:53 +0100
Subject: ARM: hisi: make unexported symbols static

The two functions hix5hd2_set_scu_boot_addr() and
hip01_set_boot_addr() are not declared or exported
outside arch/arm/mach-hisi/platsmp.c file. Avoid
the following warnings by making them static:

arch/arm/mach-hisi/platsmp.c:142:6: warning: symbol 'hip01_set_boot_addr' was not declared. Should it be static?
arch/arm/mach-hisi/platsmp.c:106:6: warning: symbol 'hix5hd2_set_scu_boot_addr' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
---
 arch/arm/mach-hisi/platsmp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index 47ed32cf57cc..e1d67648d5d0 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -103,7 +103,7 @@ static void __init hisi_common_smp_prepare_cpus(unsigned int max_cpus)
 	hisi_enable_scu_a9();
 }
 
-void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
 {
 	void __iomem *virt;
 
@@ -139,7 +139,7 @@ static const struct smp_operations hix5hd2_smp_ops __initconst = {
 #define HIP01_BOOT_ADDRESS     0x80000000
 #define REG_SC_CTRL            0x000
 
-void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
+static void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr)
 {
 	void __iomem *virt;
 
-- 
cgit v1.2.3


From 053239987f89f9a6299e78610bad010764bccd71 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 28 Jun 2016 16:10:33 +0200
Subject: soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc
 driver

On R-Car H1 and Gen2, the SYSC interrupt registers are always configured
using hardcoded values in platform code. For R-Car Gen2, values are
provided for H2 and M2-W only, other SoCs are not yet supported, and
never will be.

Move this configuration from SoC-specific platform code to the
rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured
from DT. This would be the case not only for H1, H2, and M2-W using a
modern DTS, but also for other R-Car Gen2 SoCs not supported by the
platform code, relying purely on DT.

There is no longer a need to return the mapped register block, hence
make the function return void.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-r8a7779.c   |  6 +-----
 arch/arm/mach-shmobile/pm-rcar-gen2.c |  6 +-----
 drivers/soc/renesas/rcar-sysc.c       | 12 ++++++++----
 include/linux/soc/renesas/rcar-sysc.h |  2 +-
 4 files changed, 11 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 4174cbcbc467..5c9a93f5e650 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -23,11 +23,7 @@
 
 static void __init r8a7779_sysc_init(void)
 {
-	void __iomem *base = rcar_sysc_init(0xffd85000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xffd85000, 0x0131000e);
 }
 
 #else /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 691ac166a277..7768fd1bce65 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -37,11 +37,7 @@
 
 static void __init rcar_gen2_sysc_init(u32 syscier)
 {
-	void __iomem *base = rcar_sysc_init(0xe6180000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(syscier, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xe6180000, syscier);
 }
 
 #else /* CONFIG_SMP */
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 68d6856c9d3c..22f0d646225c 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -400,10 +400,14 @@ out_put:
 }
 early_initcall(rcar_sysc_pd_init);
 
-void __iomem * __init rcar_sysc_init(phys_addr_t base)
+void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
-	if (rcar_sysc_pd_init())
-		rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+	if (!rcar_sysc_pd_init())
+		return;
 
-	return rcar_sysc_base;
+	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+	/* enable all interrupt sources, but do not use interrupt handler */
+	iowrite32(syscier, rcar_sysc_base + SYSCIER);
+	iowrite32(0, rcar_sysc_base + SYSCIMR);
 }
diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h
index 92fc613ab23d..7b8b280c181b 100644
--- a/include/linux/soc/renesas/rcar-sysc.h
+++ b/include/linux/soc/renesas/rcar-sysc.h
@@ -11,6 +11,6 @@ struct rcar_sysc_ch {
 
 int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch);
 int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch);
-void __iomem *rcar_sysc_init(phys_addr_t base);
+void rcar_sysc_init(phys_addr_t base, u32 syscier);
 
 #endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */
-- 
cgit v1.2.3


From a57ac4c16b261d63b5c957353acdca92628b2ca5 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Mon, 13 Jun 2016 00:01:49 +0300
Subject: ARM: shmobile: r8a7792: basic SoC support

Add minimal support for the R-Car V2H (R8A7792) SoC.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig         |  4 ++++
 arch/arm/mach-shmobile/Makefile        |  1 +
 arch/arm/mach-shmobile/setup-r8a7792.c | 35 ++++++++++++++++++++++++++++++++++
 3 files changed, 40 insertions(+)
 create mode 100644 arch/arm/mach-shmobile/setup-r8a7792.c

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index fe4ccb52f921..88e91583f3fb 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -86,6 +86,10 @@ config ARCH_R8A7791
 	select ARCH_RCAR_GEN2
 	select I2C
 
+config ARCH_R8A7792
+	bool "R-Car V2H (R8A77920)"
+	select ARCH_RCAR_GEN2
+
 config ARCH_R8A7793
 	bool "R-Car M2-N (R8A7793)"
 	select ARCH_RCAR_GEN2
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fc95f7bd2dd9..3fc48b02eb4f 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7792)	+= setup-r8a7792.o
 obj-$(CONFIG_ARCH_R8A7793)	+= setup-r8a7793.o
 obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
diff --git a/arch/arm/mach-shmobile/setup-r8a7792.c b/arch/arm/mach-shmobile/setup-r8a7792.c
new file mode 100644
index 000000000000..a0910395da09
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7792.c
@@ -0,0 +1,35 @@
+/*
+ * r8a7792 processor support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "rcar-gen2.h"
+
+static const char * const r8a7792_boards_compat_dt[] __initconst = {
+	"renesas,r8a7792",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)")
+	.init_early	= shmobile_init_delay,
+	.init_late	= shmobile_init_late,
+	.init_time	= rcar_gen2_timer_init,
+	.reserve	= rcar_gen2_reserve,
+	.dt_compat	= r8a7792_boards_compat_dt,
+MACHINE_END
-- 
cgit v1.2.3


From 9f5ce39ddb8f68b30cd65ae33d32f3b47a58d350 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 13 Jun 2016 12:29:37 +0200
Subject: ARM: shmobile: rcar-gen2: Obtain extal frequency from DT

On some R-Car Gen2 SoCs, the frequency of the ARM architecture timer
depends on the frequency of the external clock crystal.  Currently the
latter is determined indirectly from the state of the mode pins, which
is a relic predating DT.

Obtain the external clock crystal frequency from DT instead, removing
the dependency on the mode pins.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-rcar-gen2.c | 42 +++++++++++++++++---------------
 1 file changed, 22 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 1c6fd11c2f82..ea092d5dd475 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -46,6 +46,26 @@ u32 rcar_gen2_read_mode_pins(void)
 	return mode;
 }
 
+static unsigned int __init get_extal_freq(void)
+{
+	struct device_node *cpg, *extal;
+	u32 freq = 20000000;
+
+	cpg = of_find_compatible_node(NULL, NULL,
+				      "renesas,rcar-gen2-cpg-clocks");
+	if (!cpg)
+		return freq;
+
+	extal = of_parse_phandle(cpg, "clocks", 0);
+	of_node_put(cpg);
+	if (!extal)
+		return freq;
+
+	of_property_read_u32(extal, "clock-frequency", &freq);
+	of_node_put(extal);
+	return freq;
+}
+
 #define CNTCR 0
 #define CNTFID0 0x20
 
@@ -54,7 +74,6 @@ void __init rcar_gen2_timer_init(void)
 	u32 mode = rcar_gen2_read_mode_pins();
 #ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
-	int extal_mhz = 0;
 	u32 freq;
 
 	if (of_machine_is_compatible("renesas,r8a7794")) {
@@ -82,26 +101,9 @@ void __init rcar_gen2_timer_init(void)
 		 * with the counter disabled. Moreover, it may also report
 		 * a potentially incorrect fixed 13 MHz frequency. To be
 		 * correct these registers need to be updated to use the
-		 * frequency EXTAL / 2 which can be determined by the MD pins.
+		 * frequency EXTAL / 2.
 		 */
-
-		switch (mode & (MD(14) | MD(13))) {
-		case 0:
-			extal_mhz = 15;
-			break;
-		case MD(13):
-			extal_mhz = 20;
-			break;
-		case MD(14):
-			extal_mhz = 26;
-			break;
-		case MD(13) | MD(14):
-			extal_mhz = 30;
-			break;
-		}
-
-		/* The arch timer frequency equals EXTAL / 2 */
-		freq = extal_mhz * (1000000 / 2);
+		freq = get_extal_freq() / 2;
 	}
 
 	/* Remap "armgcnt address map" space */
-- 
cgit v1.2.3


From 2477a356dd245bbbde74c81edc5f16a6d8192023 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Mon, 13 Jun 2016 12:31:12 +0200
Subject: ARM: shmobile: rcar-gen2: Correct arch timer frequency on R-Car V2H

According to the datasheet, the frequency of the ARM architecture timer
on R-Car V2H depends on the frequency of the ZS clock, just like on
R-Car E2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-rcar-gen2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index ea092d5dd475..afb9fdcd3d90 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -76,7 +76,8 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	if (of_machine_is_compatible("renesas,r8a7794")) {
+	if (of_machine_is_compatible("renesas,r8a7792") ||
+	    of_machine_is_compatible("renesas,r8a7794")) {
 		freq = 260000000 / 8;	/* ZS / 8 */
 		/* CNTVOFF has to be initialized either from non-secure
 		 * Hypervisor mode or secure Monitor mode with SCR.NS==1.
-- 
cgit v1.2.3


From d3f3fb0cfdcf4cbf69af65e8bfdde65cedf4e53a Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 28 Jun 2016 16:10:35 +0200
Subject: ARM: shmobile: apmu: Move #ifdef CONFIG_SMP to cover more functions

shmobile_smp_apmu_prepare_cpus() is used only if CONFIG_SMP=y.

Hence move the #ifdef to cover shmobile_smp_apmu_prepare_cpus() and all
functions only called by it (apmu_init_cpu() and apmu_parse_cfg()).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/platsmp-apmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index aba75c89f9c1..c1558ef0c590 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -74,6 +74,7 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu)
 	return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
 }
 
+#ifdef CONFIG_SMP
 static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 {
 	if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem)
@@ -128,7 +129,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
 }
 
-#ifdef CONFIG_SMP
 int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	/* For this particular CPU register boot vector */
-- 
cgit v1.2.3


From 5f3bca0db8ac01a73622361f6062939638bf4730 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm+renesas@opensource.se>
Date: Tue, 28 Jun 2016 16:10:36 +0200
Subject: ARM: shmobile: apmu: Add APMU DT support via Enable method

Allow DT configuration of the APMU hardware in the case when the APMU is
pointed out in the DTB via the enable-method. The ability to configure
the APMU via C code is still kept intact to prevent DTB breakage for older
SoCs that do not rely on the enable-method for SMP support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[geert: Fix CONFIG_SMP=n build]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/platsmp-apmu.c | 92 +++++++++++++++++++++++++++++++++--
 1 file changed, 88 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index c1558ef0c590..0c6bb458b7a4 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -24,6 +24,7 @@
 #include <asm/suspend.h>
 #include "common.h"
 #include "platsmp-apmu.h"
+#include "rcar-gen2.h"
 
 static struct {
 	void __iomem *iomem;
@@ -118,14 +119,66 @@ static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
 	}
 }
 
-void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
-					   struct rcar_apmu_config *apmu_config,
-					   int num)
+static const struct of_device_id apmu_ids[] = {
+	{ .compatible = "renesas,apmu" },
+	{ /*sentinel*/ }
+};
+
+static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
+{
+	struct device_node *np_apmu, *np_cpu;
+	struct resource res;
+	int bit, index;
+	u32 id;
+
+	for_each_matching_node(np_apmu, apmu_ids) {
+		/* only enable the cluster that includes the boot CPU */
+		bool is_allowed = false;
+
+		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+			if (np_cpu) {
+				if (!of_property_read_u32(np_cpu, "reg", &id)) {
+					if (id == cpu_logical_map(0)) {
+						is_allowed = true;
+						of_node_put(np_cpu);
+						break;
+					}
+
+				}
+				of_node_put(np_cpu);
+			}
+		}
+		if (!is_allowed)
+			continue;
+
+		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
+			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
+			if (np_cpu) {
+				if (!of_property_read_u32(np_cpu, "reg", &id)) {
+					index = get_logical_index(id);
+					if ((index >= 0) &&
+					    !of_address_to_resource(np_apmu,
+								    0, &res))
+						fn(&res, index, bit);
+				}
+				of_node_put(np_cpu);
+			}
+		}
+	}
+}
+
+static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+}
 
-	/* perform per-cpu setup */
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+					   struct rcar_apmu_config *apmu_config,
+					   int num)
+{
+	shmobile_smp_apmu_setup_boot();
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
 }
 
@@ -136,7 +189,38 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	return apmu_wrap(cpu, apmu_power_on);
 }
+
+static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus)
+{
+	shmobile_smp_apmu_setup_boot();
+	apmu_parse_dt(apmu_init_cpu);
+	rcar_gen2_pm_init();
+}
+
+static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu,
+						 struct task_struct *idle)
+{
+	/* Error out when hardware debug mode is enabled */
+	if (rcar_gen2_read_mode_pins() & BIT(21)) {
+		pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+		return -ENOTSUPP;
+	}
+
+	return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
+static struct smp_operations apmu_smp_ops __initdata = {
+	.smp_prepare_cpus	= shmobile_smp_apmu_prepare_cpus_dt,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary_md21,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_can_disable	= shmobile_smp_cpu_can_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
 #endif
+};
+
+CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops);
+#endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND)
 /* nicked from arch/arm/mach-exynos/hotplug.c */
-- 
cgit v1.2.3


From c21af444eace56619e33df0b1fc67ec2e33481ac Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm+renesas@opensource.se>
Date: Tue, 28 Jun 2016 16:10:37 +0200
Subject: ARM: shmobile: smp: Add function to prioritize DT SMP

Add a function to check if other DT based method is available, and
if so return false to not hook up smp_ops from the machine vector.

This results in that DT-based SMP support has priority over older
C-based smp_ops code, and in case DT-based SMP support code does not
exist in the DTB then the old smp_ops code will still work as-is.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h  | 1 +
 arch/arm/mach-shmobile/platsmp.c | 6 ++++++
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 3b562d87826d..1a8f7b3ab449 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -10,6 +10,7 @@ extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
 			      unsigned long arg);
 extern bool shmobile_smp_cpu_can_disable(unsigned int cpu);
+extern bool shmobile_smp_init_fallback_ops(void);
 extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
 					  unsigned int max_cpus);
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index b23378f3d7e1..f3dba6f356e2 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -36,3 +36,9 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu)
 	return true; /* Hotplug of any CPU is supported */
 }
 #endif
+
+bool __init shmobile_smp_init_fallback_ops(void)
+{
+	/* fallback on PSCI/smp_ops if no other DT based method is detected */
+	return platform_can_secondary_boot() ? true : false;
+}
-- 
cgit v1.2.3


From f5d70b9cee2282ecbd98c60e5faf46a896c188a3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm+renesas@opensource.se>
Date: Tue, 28 Jun 2016 16:10:38 +0200
Subject: ARM: shmobile: r8a7790: Prioritize DT APMU support

Adjust the r8a7790 SoC support code to not configure any non-DT SMP code
in case the DT-based enable-method has been installed already.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3a18af4922b4..3506327e0bed 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -28,6 +28,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
+	.smp_init	= shmobile_smp_init_fallback_ops,
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
-- 
cgit v1.2.3


From f89a51700d7ae0ef58956a8c8f0e2c68767bcdae Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm+renesas@opensource.se>
Date: Tue, 28 Jun 2016 16:10:39 +0200
Subject: ARM: shmobile: r8a7791: Prioritize DT APMU support

Adjust the r8a7791 SoC support code to not configure any non-DT SMP code
in case the DT-based enable-method has been installed already.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 3b8dbaf07777..110e8b588e56 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -29,6 +29,7 @@ static const char *const r8a7791_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp_init	= shmobile_smp_init_fallback_ops,
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
-- 
cgit v1.2.3


From b3bf289c1c4561b4262084b64d1a115e4ba845cf Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Sun, 3 Jul 2016 23:29:45 -0700
Subject: ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set

I found one more make randconfig build error with the recent
SMP kexec changes. We need the mpuss now always available early.

Fixes: 0573b957fc21 ("ARM: OMAP4+: Prevent CPU1 related hang
with kexec")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile              | 5 ++++-
 arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index cd820f5df028..a7f2d051f524 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -78,13 +78,16 @@ obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
 endif
 
 # Power Management
+omap-4-5-pm-common			= omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
+obj-$(CONFIG_ARCH_OMAP5)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_OMAP_PM_NOOP)		+= omap-pm-noop.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
-omap-4-5-pm-common			=  pm44xx.o omap-mpuss-lowpower.o
+omap-4-5-pm-common			+= pm44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-pm-common)
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 17515179e6ae..ad982465efd0 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -64,7 +64,7 @@
 
 static void __iomem *sar_base;
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_PM) && defined(CONFIG_SMP)
 
 struct omap4_cpu_pm_info {
 	struct powerdomain *pwrdm;
-- 
cgit v1.2.3


From 59dcfc48eb41c9074938fc2a0a07634e60f08e22 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Thu, 30 Jun 2016 16:14:59 +0300
Subject: ARM: OMAP2+: omap_device: create clock alias purely from DT data

This avoids the need to add most of the clock aliases under
drivers/clk/ti/clk-xyz.c files.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_device.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index a7be05d83ec7..c2626f83e0c2 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -63,7 +63,22 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 		return;
 	}
 
-	rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL);
+	r = clk_get_sys(NULL, clk_name);
+
+	if (IS_ERR(r) && of_have_populated_dt()) {
+		struct of_phandle_args clkspec;
+
+		clkspec.np = of_find_node_by_name(NULL, clk_name);
+
+		r = of_clk_get_from_provider(&clkspec);
+
+		rc = clk_register_clkdev(r, clk_alias,
+					 dev_name(&od->pdev->dev));
+	} else {
+		rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev),
+				   clk_name, NULL);
+	}
+
 	if (rc) {
 		if (rc == -ENODEV || rc == -ENOMEM)
 			dev_err(&od->pdev->dev,
-- 
cgit v1.2.3


From 9fabc1a26e37f88cb19d5def300970a26604d9a4 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Mon, 4 Jul 2016 14:11:48 +0300
Subject: ARM: OMAP2+: hwmod: fetch main_clk based on hwmod name

With the transition to hwmod module clocks, all hwmods will have
their main clocks named <hwmod_name>_mod_ck. Use this info to
fetch main_clk, and use it if found.

Also, if a main_clk is found based on the hwmod name, disable
the direct PRCM modulemode access from hwmod.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c | 55 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 50 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 83cb527755a9..201da9158d7b 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -178,6 +178,11 @@
  */
 #define OMAP4_RST_CTRL_ST_OFFSET	4
 
+/*
+ * Maximum length for module clock handle names
+ */
+#define MOD_CLK_MAX_NAME_LEN		32
+
 /**
  * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
  * @enable_module: function to enable a module (via MODULEMODE)
@@ -200,6 +205,7 @@ struct omap_hwmod_soc_ops {
 	int (*init_clkdm)(struct omap_hwmod *oh);
 	void (*update_context_lost)(struct omap_hwmod *oh);
 	int (*get_context_lost)(struct omap_hwmod *oh);
+	int (*disable_direct_prcm)(struct omap_hwmod *oh);
 };
 
 /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
@@ -776,17 +782,35 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh _clk (main
- * functional clock pointer) if a main_clk is present.  Returns 0 on
- * success or -EINVAL on error.
+ * functional clock pointer) if a clock matching the hwmod name is found,
+ * or a main_clk is present.  Returns 0 on success or -EINVAL on error.
  */
 static int _init_main_clk(struct omap_hwmod *oh)
 {
 	int ret = 0;
+	char name[MOD_CLK_MAX_NAME_LEN];
+	struct clk *clk;
 
-	if (!oh->main_clk)
-		return 0;
+	/* +7 magic comes from '_mod_ck' suffix */
+	if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
+		pr_warn("%s: warning: cropping name for %s\n", __func__,
+			oh->name);
+
+	strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
+	strcat(name, "_mod_ck");
+
+	clk = clk_get(NULL, name);
+	if (!IS_ERR(clk)) {
+		oh->_clk = clk;
+		soc_ops.disable_direct_prcm(oh);
+		oh->main_clk = kstrdup(name, GFP_KERNEL);
+	} else {
+		if (!oh->main_clk)
+			return 0;
+
+		oh->_clk = clk_get(NULL, oh->main_clk);
+	}
 
-	oh->_clk = clk_get(NULL, oh->main_clk);
 	if (IS_ERR(oh->_clk)) {
 		pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			oh->name, oh->main_clk);
@@ -3090,6 +3114,25 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 					      oh->prcm.omap4.rstctrl_offs);
 }
 
+/**
+ * _omap4_disable_direct_prcm - disable direct PRCM control for hwmod
+ * @oh: struct omap_hwmod * to disable control for
+ *
+ * Disables direct PRCM clkctrl done by hwmod core. Instead, the hwmod
+ * will be using its main_clk to enable/disable the module. Returns
+ * 0 if successful.
+ */
+static int _omap4_disable_direct_prcm(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	oh->prcm.omap4.clkctrl_offs = 0;
+	oh->prcm.omap4.modulemode = 0;
+
+	return 0;
+}
+
 /**
  * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to deassert hardreset
@@ -3913,6 +3956,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
+		soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
 	} else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() ||
 		   soc_is_am43xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
@@ -3922,6 +3966,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
+		soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
 	} else {
 		WARN(1, "omap_hwmod: unknown SoC type\n");
 	}
-- 
cgit v1.2.3


From e98580e880fb88810a1cd2a1a2583371fc0aa19e Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Thu, 30 Jun 2016 16:15:01 +0300
Subject: ARM: OMAP2+: timer: change order of hwmod data handling

With the introduction of hwmod module clocks, the name of the hwmod
main clk may not be available before hwmod setup, as hwmod setup
may lookup the main clock dynamically based on the hwmod name.
Thus, change the order of hwmod setup and main clock handling for
the timer code, to make sure the main clock is going to be
available.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/timer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5b385bb8aff9..e7eccf6a4daf 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -289,6 +289,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (!timer->io_base)
 		return -ENXIO;
 
+	omap_hwmod_setup_one(oh_name);
+
 	/* After the dmtimer is using hwmod these clocks won't be needed */
 	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
@@ -303,7 +305,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 	clk_put(src);
 
-	omap_hwmod_setup_one(oh_name);
 	omap_hwmod_enable(oh);
 	__omap_dm_timer_init_regs(timer);
 
-- 
cgit v1.2.3


From 1d9a5425654de6bb141c7ca1d5dde120ee8c5430 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Thu, 30 Jun 2016 16:15:02 +0300
Subject: ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs

The previous implementation was racy in many locations, where the current
status of the clockdomain was read out, some operations were executed,
and the previous status info was used afterwards to decide next state
for the clockdomain. Instead, fix the implementation of the allow_idle /
deny_idle APIs to properly have usecounting support. This allows clean
handling internally within the clockdomain core, and simplifies the
usage also within hwmod.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clockdomain.c | 36 ++++++++++++++++++++++++------------
 arch/arm/mach-omap2/clockdomain.h |  2 ++
 arch/arm/mach-omap2/cpuidle44xx.c |  2 +-
 arch/arm/mach-omap2/omap-smp.c    |  2 +-
 arch/arm/mach-omap2/omap_hwmod.c  | 27 ++++++++++++---------------
 arch/arm/mach-omap2/pm.c          |  8 +-------
 arch/arm/mach-omap2/powerdomain.c | 20 ++++++--------------
 7 files changed, 47 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 2da3b5ec010c..b79b1ca9aee9 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -465,10 +465,7 @@ int clkdm_complete_init(void)
 		return -EACCES;
 
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			clkdm_wakeup(clkdm);
-		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
-			clkdm_deny_idle(clkdm);
+		clkdm_deny_idle(clkdm);
 
 		_resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs);
 		clkdm_clear_all_wkdeps(clkdm);
@@ -925,11 +922,20 @@ void clkdm_allow_idle_nolock(struct clockdomain *clkdm)
 	if (!clkdm)
 		return;
 
-	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-		pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
-			 clkdm->name);
+	if (!WARN_ON(!clkdm->forcewake_count))
+		clkdm->forcewake_count--;
+
+	if (clkdm->forcewake_count)
+		return;
+
+	if (!clkdm->usecount && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+		clkdm_sleep_nolock(clkdm);
+
+	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO))
+		return;
+
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
 		return;
-	}
 
 	if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle)
 		return;
@@ -974,11 +980,17 @@ void clkdm_deny_idle_nolock(struct clockdomain *clkdm)
 	if (!clkdm)
 		return;
 
-	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-		pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
-			 clkdm->name);
+	if (clkdm->forcewake_count++)
+		return;
+
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		clkdm_wakeup_nolock(clkdm);
+
+	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO))
+		return;
+
+	if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)
 		return;
-	}
 
 	if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle)
 		return;
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 2c398ce1a0f2..24667a5a9dc0 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -114,6 +114,7 @@ struct omap_hwmod;
  * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
  * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
  * @usecount: Usecount tracking
+ * @forcewake_count: Usecount for forcing the domain active
  * @node: list_head to link all clockdomains together
  *
  * @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
@@ -138,6 +139,7 @@ struct clockdomain {
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
 	int usecount;
+	int forcewake_count;
 	struct list_head node;
 };
 
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 4b8e9f4d59ea..fa138d4032b6 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -140,7 +140,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_wakeup(cpu_clkdm[1]);
+		clkdm_deny_idle(cpu_clkdm[1]);
 		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
 		clkdm_allow_idle(cpu_clkdm[1]);
 
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index d53a0def2d6c..b4de3da6dffa 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -200,7 +200,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Ensure that CPU power state is set to ON to avoid CPU
 		 * powerdomain transition on wfi
 		 */
-		clkdm_wakeup_nolock(cpu1_clkdm);
+		clkdm_deny_idle_nolock(cpu1_clkdm);
 		pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
 		clkdm_allow_idle_nolock(cpu1_clkdm);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 201da9158d7b..5b709383381c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1702,7 +1702,6 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
 	int ret = -EINVAL;
-	int hwsup = 0;
 
 	if (!oh)
 		return -EINVAL;
@@ -1720,7 +1719,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 		 * might not be completed. The clockdomain can be set
 		 * in HW_AUTO only when the module become ready.
 		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm);
+		clkdm_deny_idle(oh->clkdm);
 		ret = clkdm_hwmod_enable(oh->clkdm, oh);
 		if (ret) {
 			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -1747,8 +1746,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 		 * Set the clockdomain to HW_AUTO, assuming that the
 		 * previous state was HW_AUTO.
 		 */
-		if (hwsup)
-			clkdm_allow_idle(oh->clkdm);
+		clkdm_allow_idle(oh->clkdm);
 
 		clkdm_hwmod_disable(oh->clkdm, oh);
 	}
@@ -2102,7 +2100,6 @@ static int _enable_preprogram(struct omap_hwmod *oh)
 static int _enable(struct omap_hwmod *oh)
 {
 	int r;
-	int hwsup = 0;
 
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
@@ -2162,8 +2159,7 @@ static int _enable(struct omap_hwmod *oh)
 		 * completely the module. The clockdomain can be set
 		 * in HW_AUTO only when the module become ready.
 		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm) &&
-			!clkdm_missing_idle_reporting(oh->clkdm);
+		clkdm_deny_idle(oh->clkdm);
 		r = clkdm_hwmod_enable(oh->clkdm, oh);
 		if (r) {
 			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
@@ -2183,14 +2179,10 @@ static int _enable(struct omap_hwmod *oh)
 
 	r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
 		-EINVAL;
-	if (!r) {
-		/*
-		 * Set the clockdomain to HW_AUTO only if the target is ready,
-		 * assuming that the previous state was HW_AUTO
-		 */
-		if (oh->clkdm && hwsup)
-			clkdm_allow_idle(oh->clkdm);
+	if (oh->clkdm)
+		clkdm_allow_idle(oh->clkdm);
 
+	if (!r) {
 		oh->_state = _HWMOD_STATE_ENABLED;
 
 		/* Access the sysconfig only if the target is ready */
@@ -2244,6 +2236,9 @@ static int _idle(struct omap_hwmod *oh)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 
+	if (oh->clkdm)
+		clkdm_deny_idle(oh->clkdm);
+
 	if (oh->flags & HWMOD_BLOCK_WFI)
 		cpu_idle_poll_ctrl(false);
 	if (soc_ops.disable_module)
@@ -2256,8 +2251,10 @@ static int _idle(struct omap_hwmod *oh)
 	 * transition to complete properly.
 	 */
 	_disable_clocks(oh);
-	if (oh->clkdm)
+	if (oh->clkdm) {
+		clkdm_allow_idle(oh->clkdm);
 		clkdm_hwmod_disable(oh->clkdm, oh);
+	}
 
 	/* Mux pins for device idle if populated */
 	if (oh->mux && oh->mux->pads_dynamic) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 2f7b11da7d5d..678d2a31dcb8 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -110,13 +110,7 @@ static void __init omap2_init_processor_devices(void)
 
 int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	/* XXX The usecount test is racy */
-	if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
-	    !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING))
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-		 clkdm->usecount == 0)
-		clkdm_sleep(clkdm);
+	clkdm_allow_idle(clkdm);
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 78af6d8cf2e2..be7a9761ab3f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -222,7 +222,6 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
  * @pwrdm: struct powerdomain * to operate on
  * @curr_pwrst: current power state of @pwrdm
  * @pwrst: power state to switch to
- * @hwsup: ptr to a bool to return whether the clkdm is hardware-supervised
  *
  * Determine whether the powerdomain needs to be turned on before
  * attempting to switch power states.  Called by
@@ -233,8 +232,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
  * "Types of sleep_switch" comment above).
  */
 static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
-					       u8 curr_pwrst, u8 pwrst,
-					       bool *hwsup)
+					       u8 curr_pwrst, u8 pwrst)
 {
 	u8 sleep_switch;
 
@@ -244,8 +242,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
 		    arch_pwrdm->pwrdm_set_lowpwrstchange) {
 			sleep_switch = LOWPOWERSTATE_SWITCH;
 		} else {
-			*hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
-			clkdm_wakeup_nolock(pwrdm->pwrdm_clkdms[0]);
+			clkdm_deny_idle_nolock(pwrdm->pwrdm_clkdms[0]);
 			sleep_switch = FORCEWAKEUP_SWITCH;
 		}
 	} else {
@@ -259,7 +256,6 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
  * _pwrdm_restore_clkdm_state - restore the clkdm hwsup state after pwrst change
  * @pwrdm: struct powerdomain * to operate on
  * @sleep_switch: return value from _pwrdm_save_clkdm_state_and_activate()
- * @hwsup: should @pwrdm's first clockdomain be set to hardware-supervised mode?
  *
  * Restore the clockdomain state perturbed by
  * _pwrdm_save_clkdm_state_and_activate(), and call the power state
@@ -270,14 +266,11 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
  * software-supervised sleep.  No return value.
  */
 static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm,
-				       u8 sleep_switch, bool hwsup)
+				       u8 sleep_switch)
 {
 	switch (sleep_switch) {
 	case FORCEWAKEUP_SWITCH:
-		if (hwsup)
-			clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
-		else
-			clkdm_sleep_nolock(pwrdm->pwrdm_clkdms[0]);
+		clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]);
 		break;
 	case LOWPOWERSTATE_SWITCH:
 		if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
@@ -1092,7 +1085,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	u8 next_pwrst, sleep_switch;
 	int curr_pwrst;
 	int ret = 0;
-	bool hwsup = false;
 
 	if (!pwrdm || IS_ERR(pwrdm))
 		return -EINVAL;
@@ -1116,14 +1108,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 		goto osps_out;
 
 	sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
-							    pwrst, &hwsup);
+							    pwrst);
 
 	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
 	if (ret)
 		pr_err("%s: unable to set power state of powerdomain: %s\n",
 		       __func__, pwrdm->name);
 
-	_pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup);
+	_pwrdm_restore_clkdm_state(pwrdm, sleep_switch);
 
 osps_out:
 	pwrdm_unlock(pwrdm);
-- 
cgit v1.2.3


From 183e2077d007aa4b697efba095ecfea7244a6107 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Thu, 30 Jun 2016 16:15:03 +0300
Subject: ARM: AM33xx: fix module_wait_ready without clkctrl register

If the module has no clkctrl register defined, module_wait_ready should
not try to access this. This can potentially cause an illegal register
access, and result in bad idle reporting also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/cm33xx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 7b181f929525..c073fb57dd13 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -220,6 +220,9 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
+	if (!clkctrl_offs)
+		return 0;
+
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
-- 
cgit v1.2.3


From 06de15694bb0c9d6c27b1f33dbf8337f1985a59d Mon Sep 17 00:00:00 2001
From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Tue, 28 Jun 2016 18:25:10 +0900
Subject: ARM: uniphier: remove empty DT machine descriptor

Since the initial support of mach-uniphier, this has always been
just empty.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-uniphier/Makefile   |  1 -
 arch/arm/mach-uniphier/uniphier.c | 30 ------------------------------
 2 files changed, 31 deletions(-)
 delete mode 100644 arch/arm/mach-uniphier/uniphier.c

(limited to 'arch')

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 1233f9b610bc..396afe109e67 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1,2 +1 @@
-obj-y			:= uniphier.o
 obj-$(CONFIG_SMP)	+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-uniphier/uniphier.c b/arch/arm/mach-uniphier/uniphier.c
deleted file mode 100644
index 9be10efacb7d..000000000000
--- a/arch/arm/mach-uniphier/uniphier.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach/arch.h>
-
-static const char * const uniphier_dt_compat[] __initconst = {
-	"socionext,ph1-sld3",
-	"socionext,ph1-ld4",
-	"socionext,ph1-pro4",
-	"socionext,ph1-sld8",
-	"socionext,ph1-pro5",
-	"socionext,proxstream2",
-	"socionext,ph1-ld6b",
-	NULL,
-};
-
-DT_MACHINE_START(UNIPHIER, "Socionext UniPhier")
-	.dt_compat	= uniphier_dt_compat,
-MACHINE_END
-- 
cgit v1.2.3


From 222de7bfdf135e33f8708c6b287c888c8ff100cc Mon Sep 17 00:00:00 2001
From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Date: Wed, 29 Jun 2016 14:21:42 +0200
Subject: ARM: tango: add HOTPLUG_CPU support

cpu_die() and cpu_kill() are implemented in firmware.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-tango/platsmp.c | 36 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h     |  4 +++-
 2 files changed, 39 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c
index a21f55e000d2..8380699d4fa3 100644
--- a/arch/arm/mach-tango/platsmp.c
+++ b/arch/arm/mach-tango/platsmp.c
@@ -1,3 +1,4 @@
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include "smc.h"
@@ -9,8 +10,43 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_kill() and cpu_die() run concurrently on different cores.
+ * Firmware will only "kill" a core once it has properly "died".
+ * Try a few times to kill a core before giving up, and sleep
+ * between tries to give that core enough time to die.
+ */
+static int tango_cpu_kill(unsigned int cpu)
+{
+	int i, err;
+
+	for (i = 0; i < 10; ++i) {
+		msleep(10);
+		err = tango_aux_core_kill(cpu);
+		if (!err)
+			return true;
+	}
+
+	return false;
+}
+
+static void tango_cpu_die(unsigned int cpu)
+{
+	while (tango_aux_core_die(cpu) < 0)
+		cpu_relax();
+
+	panic("cpu %d failed to die\n", cpu);
+}
+#else
+#define tango_cpu_kill	NULL
+#define tango_cpu_die	NULL
+#endif
+
 static const struct smp_operations tango_smp_ops __initconst = {
 	.smp_boot_secondary	= tango_boot_secondary,
+	.cpu_kill		= tango_cpu_kill,
+	.cpu_die		= tango_cpu_die,
 };
 
 CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h
index 7a4af35cc390..3d31f984f44c 100644
--- a/arch/arm/mach-tango/smc.h
+++ b/arch/arm/mach-tango/smc.h
@@ -2,4 +2,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
-#define tango_set_aux_boot_addr(val)	tango_smc((unsigned int)val, 0x105)
+#define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_aux_core_die(val)		tango_smc(val, 0x121)
+#define tango_aux_core_kill(val)	tango_smc(val, 0x122)
-- 
cgit v1.2.3


From fa06f54a1837428e1b67ca3947fa939b7227c668 Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Tue, 5 Jul 2016 22:10:11 -0700
Subject: ARM: oxnas: Change OX810SE default driver config

Since the SP804 timer changes will not been merged upstream, switch the
default OX810SE config to the OXNAS RPS Timer driver configuration.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-oxnas/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
index 4fff3c7666df..19164d729d2a 100644
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@@ -11,10 +11,10 @@ if ARCH_OXNAS
 
 config MACH_OX810SE
 	bool "Support OX810SE Based Products"
-	select ARM_TIMER_SP804
 	select COMMON_CLK_OXNAS
 	select CPU_ARM926T
 	select MFD_SYSCON
+	select OXNAS_RPS_TIMER
 	select PINCTRL_OXNAS
 	select RESET_OXNAS
 	select VERSATILE_FPGA_IRQ
-- 
cgit v1.2.3


From 9251e1d634946fb9caf504288409b3504c795eca Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Tue, 5 Jul 2016 15:56:54 +0200
Subject: ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu

The iomem passed to s5p_init_cpu is used as read-only.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/plat-samsung/cpu.c              | 2 +-
 arch/arm/plat-samsung/include/plat/cpu.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index bd12a55401e0..a107b3a0b095 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -44,7 +44,7 @@ void __init s3c64xx_init_cpu(void)
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
 }
 
-void __init s5p_init_cpu(void __iomem *cpuid_addr)
+void __init s5p_init_cpu(const void __iomem *cpuid_addr)
 {
 	samsung_cpu_id = readl_relaxed(cpuid_addr);
 	samsung_cpu_rev = samsung_cpu_id & 0xFF;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4f8a6221dc6d..b7b702a72cac 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -113,7 +113,7 @@ extern void s3c_init_cpu(unsigned long idcode,
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
+extern void s5p_init_cpu(const void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 
-- 
cgit v1.2.3


From 32981ea5b98682a70fdd27f2246fcd2c4e10126b Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 4 Jun 2016 10:09:53 +0300
Subject: ARM: clps711x: Reduce static map size

Last CLPS711X CPU register is PLLR has 0xa5a8 address, so we can reduce
the map to 48k and align the end of the static at VMALLOC_START.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/include/debug/clps711x.S              | 4 ++--
 arch/arm/mach-clps711x/common.c                | 4 ++--
 arch/arm/mach-clps711x/include/mach/hardware.h | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S
index abe225436686..c17ac5c9e5f3 100644
--- a/arch/arm/include/debug/clps711x.S
+++ b/arch/arm/include/debug/clps711x.S
@@ -9,10 +9,10 @@
 
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x0000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x0000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x0000)
 #else
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x1000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x1000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x1000)
 #endif
 
 #define SYSFLG		(0x0140)
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 671acc5a3282..6466da8f3c11 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -37,8 +37,8 @@ static struct map_desc clps711x_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
 		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
+		.length		= 48 * SZ_1K,
+		.type		= MT_DEVICE,
 	}
 };
 
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 833129c9f798..cfd0e2cd2b78 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -24,7 +24,7 @@
 
 #include <mach/clps711x.h>
 
-#define CLPS711X_VIRT_BASE	IOMEM(0xfeff0000)
+#define CLPS711X_VIRT_BASE	IOMEM(0xfeff4000)
 
 #ifndef __ASSEMBLY__
 #define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
-- 
cgit v1.2.3


From 0db943ec029a1ced48c71617706a1e8d782c9676 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 4 Jun 2016 10:10:03 +0300
Subject: ARM: clps711x: Add basic DT support

This patch adds basic support to run Cirrus Logic ARMv4T CPUs
with device-tree support.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-clps711x/Kconfig    |  9 +++++
 arch/arm/mach-clps711x/Makefile   |  1 +
 arch/arm/mach-clps711x/board-dt.c | 82 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 92 insertions(+)
 create mode 100644 arch/arm/mach-clps711x/board-dt.c

(limited to 'arch')

diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index f711498c180c..f21700cf61f4 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -2,6 +2,15 @@ if ARCH_CLPS711X
 
 menu "CLPS711X/EP721X/EP731X Implementations"
 
+config MACH_CLPS711X_DT
+	bool "Device-tree support"
+	select CLKSRC_OF
+	select OF_IRQ
+	select USE_OF
+	help
+	  Select this if you want to experiment device-tree with
+	  ARMv4T Cirrus Logic chips.
+
 config ARCH_AUTCPU12
 	bool "AUTCPU12"
 	help
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f04151efd96a..ef6df40214b7 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -6,6 +6,7 @@
 
 obj-y				:= common.o devices.o
 
+obj-$(CONFIG_MACH_CLPS711X_DT)	+= board-dt.o
 obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c
new file mode 100644
index 000000000000..ee1f83b1a332
--- /dev/null
+++ b/arch/arm/mach-clps711x/board-dt.c
@@ -0,0 +1,82 @@
+/*
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2016
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/sizes.h>
+
+#include <linux/mfd/syscon/clps711x.h>
+
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define CLPS711X_VIRT_BASE	IOMEM(0xfeff4000)
+#define CLPS711X_PHYS_BASE	(0x80000000)
+# define SYSFLG1		(0x0140)
+# define HALT			(0x0800)
+# define UNIQID			(0x2440)
+# define RANDID0		(0x2700)
+# define RANDID1		(0x2704)
+# define RANDID2		(0x2708)
+# define RANDID3		(0x270c)
+
+static struct map_desc clps711x_io_desc __initdata = {
+	.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
+	.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
+	.length		= 48 * SZ_1K,
+	.type		= MT_DEVICE,
+};
+
+static void __init clps711x_map_io(void)
+{
+	iotable_init(&clps711x_io_desc, 1);
+}
+
+static const struct resource clps711x_cpuidle_res =
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
+
+static void __init clps711x_init(void)
+{
+	u32 id[5];
+
+	id[0] = readl(CLPS711X_VIRT_BASE + UNIQID);
+	id[1] = readl(CLPS711X_VIRT_BASE + RANDID0);
+	id[2] = readl(CLPS711X_VIRT_BASE + RANDID1);
+	id[3] = readl(CLPS711X_VIRT_BASE + RANDID2);
+	id[4] = readl(CLPS711X_VIRT_BASE + RANDID3);
+	system_rev = SYSFLG1_VERID(readl(CLPS711X_VIRT_BASE + SYSFLG1));
+
+	add_device_randomness(id, sizeof(id));
+
+	system_serial_low = id[0];
+
+	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
+					&clps711x_cpuidle_res, 1);
+}
+
+static void clps711x_restart(enum reboot_mode mode, const char *cmd)
+{
+	soft_restart(0);
+}
+
+static const char *clps711x_compat[] __initconst = {
+	"cirrus,ep7209",
+	NULL
+};
+
+DT_MACHINE_START(CLPS711X_DT, "Cirrus Logic CLPS711X (Device Tree Support)")
+	.dt_compat	= clps711x_compat,
+	.map_io		= clps711x_map_io,
+	.init_late	= clps711x_init,
+	.restart	= clps711x_restart,
+MACHINE_END
-- 
cgit v1.2.3


From 4a56f46a7dc6ea9ee9733a6382fe4a1b0d947dd5 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 4 Jun 2016 10:10:06 +0300
Subject: ARM: clps711x: Remove boards support

Any CLPS711X-based board can be replaced with devicetree equivalent.
Remove the board files.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-clps711x/Kconfig       | 31 -------------------------------
 arch/arm/mach-clps711x/Makefile      | 13 -------------
 arch/arm/mach-clps711x/Makefile.boot |  5 -----
 3 files changed, 49 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index f21700cf61f4..0a170e12f9ff 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -11,37 +11,6 @@ config MACH_CLPS711X_DT
 	  Select this if you want to experiment device-tree with
 	  ARMv4T Cirrus Logic chips.
 
-config ARCH_AUTCPU12
-	bool "AUTCPU12"
-	help
-	  Say Y if you intend to run the kernel on the autronix autcpu12
-	  board. This board is based on a Cirrus Logic CS89712.
-
-config ARCH_CDB89712
-	bool "CDB89712"
-	help
-	  This is an evaluation board from Cirrus for the CS89712 processor.
-	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
-	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
-
-config ARCH_CLEP7312
-	bool "CLEP7312"
-	help
-	  Boards based on the Cirrus Logic 7212/7312 chips.
-
-config ARCH_EDB7211
-	bool "EDB7211"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	help
-	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
-	  evaluation board.
-
-config ARCH_P720T
-	bool "P720T"
-	help
-	  Say Y here if you intend to run this kernel on the ARM Prospector
-	  720T.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index ef6df40214b7..d79d99896bd7 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -1,14 +1 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= common.o devices.o
-
 obj-$(CONFIG_MACH_CLPS711X_DT)	+= board-dt.o
-obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
-obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
-obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
-obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
-obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
index eba77d35a615..e69de29bb2d1 100644
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ b/arch/arm/mach-clps711x/Makefile.boot
@@ -1,5 +0,0 @@
-# The standard locations for stuff on CLPS711x type processors
-params_phys-y				:= 0xc0000100
-# Should probably have some agreement on these...
-initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
-initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
-- 
cgit v1.2.3


From c86f51737f8dedbfc2b8566b15231d4ff6d6ac59 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 4 Jun 2016 10:10:13 +0300
Subject: ARM: clps711x: Switch to MULTIPLATFORM

Switch CLPS711X to multiplatform.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig                                 |  14 --
 arch/arm/Makefile                                |   1 -
 arch/arm/mach-clps711x/Kconfig                   |  23 ++-
 arch/arm/mach-clps711x/Makefile                  |   2 +-
 arch/arm/mach-clps711x/include/mach/clps711x.h   | 204 -----------------------
 arch/arm/mach-clps711x/include/mach/hardware.h   |  53 ------
 arch/arm/mach-clps711x/include/mach/uncompress.h |  55 ------
 7 files changed, 12 insertions(+), 340 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/clps711x.h
 delete mode 100644 arch/arm/mach-clps711x/include/mach/hardware.h
 delete mode 100644 arch/arm/mach-clps711x/include/mach/uncompress.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 90542db1220d..7a13e5a8fbbd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -353,20 +353,6 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select CPU_ARM720T
-	select GENERIC_CLOCKEVENTS
-	select MFD_SYSCON
-	select SOC_BUS
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 274e8a6582f1..10f16b35d29f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -140,7 +140,6 @@ head-y		:= arch/arm/kernel/head$(MMUEXT).o
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # We don't want the htc bootloader to corrupt kernel during resume
 textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0a170e12f9ff..3b56197ccfd0 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -1,16 +1,15 @@
-if ARCH_CLPS711X
-
-menu "CLPS711X/EP721X/EP731X Implementations"
-
-config MACH_CLPS711X_DT
-	bool "Device-tree support"
+menuconfig ARCH_CLPS711X
+	bool "Cirrus Logic EP721x/EP731x-based"
+	depends on ARCH_MULTI_V4T
+	select ARCH_REQUIRE_GPIOLIB
+	select AUTO_ZRELADDR
+	select CLKSRC_MMIO
 	select CLKSRC_OF
+	select COMMON_CLK
+	select CPU_ARM720T
+	select GENERIC_CLOCKEVENTS
+	select MFD_SYSCON
 	select OF_IRQ
 	select USE_OF
 	help
-	  Select this if you want to experiment device-tree with
-	  ARMv4T Cirrus Logic chips.
-
-endmenu
-
-endif
+	  Select this if you use ARMv4T Cirrus Logic chips.
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index d79d99896bd7..bd0b7b5d6e9d 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_MACH_CLPS711X_DT)	+= board-dt.o
+obj-y += board-dt.o
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
deleted file mode 100644
index eb052a11aa9d..000000000000
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  This file contains the hardware definitions of the Cirrus Logic
- *  ARM7 CLPS711X internal registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __MACH_CLPS711X_H
-#define __MACH_CLPS711X_H
-
-#include <linux/mfd/syscon/clps711x.h>
-
-#define CLPS711X_PHYS_BASE	(0x80000000)
-
-#define PADR		(0x0000)
-#define PBDR		(0x0001)
-#define PCDR		(0x0002)
-#define PDDR		(0x0003)
-#define PADDR		(0x0040)
-#define PBDDR		(0x0041)
-#define PCDDR		(0x0042)
-#define PDDDR		(0x0043)
-#define PEDR		(0x0083)
-#define PEDDR		(0x00c3)
-#define SYSCON1		(0x0100)
-#define SYSFLG1		(0x0140)
-#define MEMCFG1		(0x0180)
-#define MEMCFG2		(0x01c0)
-#define DRFPR		(0x0200)
-#define LCDCON		(0x02c0)
-#define TC1D		(0x0300)
-#define TC2D		(0x0340)
-#define RTCDR		(0x0380)
-#define RTCMR		(0x03c0)
-#define PMPCON		(0x0400)
-#define CODR		(0x0440)
-#define UARTDR1		(0x0480)
-#define UBRLCR1		(0x04c0)
-#define SYNCIO		(0x0500)
-#define PALLSW		(0x0540)
-#define PALMSW		(0x0580)
-#define STFCLR		(0x05c0)
-#define HALT		(0x0800)
-#define STDBY		(0x0840)
-
-#define FBADDR		(0x1000)
-#define SYSCON2		(0x1100)
-#define SYSFLG2		(0x1140)
-#define UARTDR2		(0x1480)
-#define UBRLCR2		(0x14c0)
-#define SS2DR		(0x1500)
-#define SS2POP		(0x16c0)
-
-#define DAIR		(0x2000)
-#define DAIDR0		(0x2040)
-#define DAIDR1		(0x2080)
-#define DAIDR2		(0x20c0)
-#define DAISR		(0x2100)
-#define SYSCON3		(0x2200)
-#define LEDFLSH		(0x22c0)
-#define SDCONF		(0x2300)
-#define SDRFPR		(0x2340)
-#define UNIQID		(0x2440)
-#define DAI64FS		(0x2600)
-#define PLLW		(0x2610)
-#define PLLR		(0xa5a8)
-#define RANDID0		(0x2700)
-#define RANDID1		(0x2704)
-#define RANDID2		(0x2708)
-#define RANDID3		(0x270c)
-
-#define LCDCON_GSEN		(1 << 30)
-#define LCDCON_GSMD		(1 << 31)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR		(1 << 8)
-#define UARTDR_PARERR		(1 << 9)
-#define UARTDR_OVERR		(1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
-#define UBRLCR_BREAK		(1 << 12)
-#define UBRLCR_PRTEN		(1 << 13)
-#define UBRLCR_EVENPRT		(1 << 14)
-#define UBRLCR_XSTOP		(1 << 15)
-#define UBRLCR_FIFOEN		(1 << 16)
-#define UBRLCR_WRDLEN5		(0 << 17)
-#define UBRLCR_WRDLEN6		(1 << 17)
-#define UBRLCR_WRDLEN7		(2 << 17)
-#define UBRLCR_WRDLEN8		(3 << 17)
-#define UBRLCR_WRDLEN_MASK	(3 << 17)
-
-#define SYNCIO_FRMLEN(x)	(((x) & 0x1f) << 8)
-#define SYNCIO_SMCKEN		(1 << 13)
-#define SYNCIO_TXFRMEN		(1 << 14)
-
-#define DAIR_RESERVED		(0x0404)
-#define DAIR_DAIEN		(1 << 16)
-#define DAIR_ECS		(1 << 17)
-#define DAIR_LCTM		(1 << 19)
-#define DAIR_LCRM		(1 << 20)
-#define DAIR_RCTM		(1 << 21)
-#define DAIR_RCRM		(1 << 22)
-#define DAIR_LBM		(1 << 23)
-
-#define DAIDR2_FIFOEN		(1 << 15)
-#define DAIDR2_FIFOLEFT		(0x0d << 16)
-#define DAIDR2_FIFORIGHT	(0x11 << 16)
-
-#define DAISR_RCTS		(1 << 0)
-#define DAISR_RCRS		(1 << 1)
-#define DAISR_LCTS		(1 << 2)
-#define DAISR_LCRS		(1 << 3)
-#define DAISR_RCTU		(1 << 4)
-#define DAISR_RCRO		(1 << 5)
-#define DAISR_LCTU		(1 << 6)
-#define DAISR_LCRO		(1 << 7)
-#define DAISR_RCNF		(1 << 8)
-#define DAISR_RCNE		(1 << 9)
-#define DAISR_LCNF		(1 << 10)
-#define DAISR_LCNE		(1 << 11)
-#define DAISR_FIFO		(1 << 12)
-
-#define DAI64FS_I2SF64		(1 << 0)
-#define DAI64FS_AUDIOCLKEN	(1 << 1)
-#define DAI64FS_AUDIOCLKSRC	(1 << 2)
-#define DAI64FS_MCLK256EN	(1 << 3)
-#define DAI64FS_LOOPBACK	(1 << 5)
-
-#define SDCONF_ACTIVE		(1 << 10)
-#define SDCONF_CLKCTL		(1 << 9)
-#define SDCONF_WIDTH_4		(0 << 7)
-#define SDCONF_WIDTH_8		(1 << 7)
-#define SDCONF_WIDTH_16		(2 << 7)
-#define SDCONF_WIDTH_32		(3 << 7)
-#define SDCONF_SIZE_16		(0 << 5)
-#define SDCONF_SIZE_64		(1 << 5)
-#define SDCONF_SIZE_128		(2 << 5)
-#define SDCONF_SIZE_256		(3 << 5)
-#define SDCONF_CASLAT_2		(2)
-#define SDCONF_CASLAT_3		(3)
-
-#define MEMCFG_BUS_WIDTH_32	(1)
-#define MEMCFG_BUS_WIDTH_16	(0)
-#define MEMCFG_BUS_WIDTH_8	(3)
-
-#define MEMCFG_SQAEN		(1 << 6)
-#define MEMCFG_CLKENB		(1 << 7)
-
-#define MEMCFG_WAITSTATE_8_3	(0 << 2)
-#define MEMCFG_WAITSTATE_7_3	(1 << 2)
-#define MEMCFG_WAITSTATE_6_3	(2 << 2)
-#define MEMCFG_WAITSTATE_5_3	(3 << 2)
-#define MEMCFG_WAITSTATE_4_2	(4 << 2)
-#define MEMCFG_WAITSTATE_3_2	(5 << 2)
-#define MEMCFG_WAITSTATE_2_2	(6 << 2)
-#define MEMCFG_WAITSTATE_1_2	(7 << 2)
-#define MEMCFG_WAITSTATE_8_1	(8 << 2)
-#define MEMCFG_WAITSTATE_7_1	(9 << 2)
-#define MEMCFG_WAITSTATE_6_1	(10 << 2)
-#define MEMCFG_WAITSTATE_5_1	(11 << 2)
-#define MEMCFG_WAITSTATE_4_0	(12 << 2)
-#define MEMCFG_WAITSTATE_3_0	(13 << 2)
-#define MEMCFG_WAITSTATE_2_0	(14 << 2)
-#define MEMCFG_WAITSTATE_1_0	(15 << 2)
-
-/* INTSR1 Interrupts */
-#define IRQ_CSINT		(4)
-#define IRQ_EINT1		(5)
-#define IRQ_EINT2		(6)
-#define IRQ_EINT3		(7)
-#define IRQ_TC1OI		(8)
-#define IRQ_TC2OI		(9)
-#define IRQ_RTCMI		(10)
-#define IRQ_TINT		(11)
-#define IRQ_UTXINT1		(12)
-#define IRQ_URXINT1		(13)
-#define IRQ_UMSINT		(14)
-#define IRQ_SSEOTI		(15)
-
-/* INTSR2 Interrupts */
-#define IRQ_KBDINT		(16 + 0)
-#define IRQ_SS2RX		(16 + 1)
-#define IRQ_SS2TX		(16 + 2)
-#define IRQ_UTXINT2		(16 + 12)
-#define IRQ_URXINT2		(16 + 13)
-
-/* INTSR3 Interrupts */
-#define IRQ_DAIINT		(32 + 0)
-
-#endif /* __MACH_CLPS711X_H */
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
deleted file mode 100644
index cfd0e2cd2b78..000000000000
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <mach/clps711x.h>
-
-#define CLPS711X_VIRT_BASE	IOMEM(0xfeff4000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
-#define clps_readw(off)		readw(CLPS711X_VIRT_BASE + (off))
-#define clps_readl(off)		readl(CLPS711X_VIRT_BASE + (off))
-#define clps_writeb(val,off)	writeb(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writew(val,off)	writew(val, CLPS711X_VIRT_BASE + (off))
-#define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
-#endif
-
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-
-#define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
-#define CLPS711X_SRAM_SIZE	(48 * 1024)
-
-#define CLPS711X_SDRAM0_BASE	(0xc0000000)
-#define CLPS711X_SDRAM1_BASE	(0xd0000000)
-
-#endif
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
deleted file mode 100644
index 5f02d06dc655..000000000000
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/clps711x.h>
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-#define phys_reg(x)	(*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	phys_reg(UARTDRx) = c;
-}
-
-static inline void flush(void)
-{
-	while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-- 
cgit v1.2.3


From 2dc9e0b9f162af7e2047176a31716eac5301916f Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Thu, 30 Jun 2016 17:10:10 -0700
Subject: ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs

Northstar Plus SoCs (ARCH_BCM_NSP) have the exact same UART location and
properties like the register shift of 0, so make it usable.

Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/Kconfig.debug | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 19a3dcf5eb2e..6912f4fbbe80 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -138,8 +138,8 @@ choice
 		select DEBUG_UART_PL01X
 
 	config DEBUG_BCM_5301X
-		bool "Kernel low-level debugging on BCM5301X UART1"
-		depends on ARCH_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
 	config DEBUG_BCM_KONA_UART
-- 
cgit v1.2.3


From 8264dde537b3de1a1d074d4034648bd9adfe9a6f Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 6 Jul 2016 22:04:42 +0200
Subject: ARM: tango: fix CONFIG_HOTPLUG_CPU=n build

Building with CONFIG_HOTPLUG_CPU disabled fails for mach-tango:

include/linux/stddef.h:7:14: error: excess elements in struct initializer [-Werror]
 #define NULL ((void *)0)
arch/arm/mach-tango/platsmp.c:48:15: note: in expansion of macro 'tango_cpu_kill'
  .cpu_kill  = tango_cpu_kill,

the problem as that the .cpu_kill and .cpu_die struct members are
unavailable and we must not try to assign them in this configuration.

Hiding the two (as all other platforms do too) lets us get rid of
the #else clause as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/mach-tango/platsmp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c
index 8380699d4fa3..98c62a4a8623 100644
--- a/arch/arm/mach-tango/platsmp.c
+++ b/arch/arm/mach-tango/platsmp.c
@@ -38,15 +38,14 @@ static void tango_cpu_die(unsigned int cpu)
 
 	panic("cpu %d failed to die\n", cpu);
 }
-#else
-#define tango_cpu_kill	NULL
-#define tango_cpu_die	NULL
 #endif
 
 static const struct smp_operations tango_smp_ops __initconst = {
 	.smp_boot_secondary	= tango_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= tango_cpu_kill,
 	.cpu_die		= tango_cpu_die,
+#endif
 };
 
 CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
-- 
cgit v1.2.3


From abee8fbf2b2170efa0956ce1942ebe777a94cfdd Mon Sep 17 00:00:00 2001
From: Jiancheng Xue <xuejiancheng@huawei.com>
Date: Wed, 15 Jun 2016 10:19:05 +0800
Subject: ARM: hisi: consolidate the hisilicon machine entries

The original patch was to add compatible string for Hi3519 soc
and do some cleanup.

Since the generic machine entry could meet most of the cases,
so I did a further cleanup to reuse it and just keep one machine
entry that needs map_io here.

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
---
 arch/arm/mach-hisi/hisilicon.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 8cc62150116a..c08c44ec5175 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -53,31 +53,3 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
 	.map_io		= hi3620_map_io,
 	.dt_compat	= hi3xxx_compat,
 MACHINE_END
-
-static const char *const hix5hd2_compat[] __initconst = {
-	"hisilicon,hix5hd2",
-	NULL,
-};
-
-DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
-	.dt_compat	= hix5hd2_compat,
-MACHINE_END
-
-static const char *const hip04_compat[] __initconst = {
-	"hisilicon,hip04-d01",
-	NULL,
-};
-
-DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
-	.dt_compat	= hip04_compat,
-MACHINE_END
-
-static const char *const hip01_compat[] __initconst = {
-	"hisilicon,hip01",
-	"hisilicon,hip01-ca9x2",
-	NULL,
-};
-
-DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)")
-	.dt_compat      = hip01_compat,
-MACHINE_END
-- 
cgit v1.2.3


From a30eceb7a59daa2d92cca7f2f30b9bd91a8d7111 Mon Sep 17 00:00:00 2001
From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Date: Thu, 7 Jul 2016 15:08:14 +0200
Subject: ARM: tango: add Suspend-to-RAM support

Ask firmware to put RAM in self-refresh mode and power system down.

    echo mem > /sys/power/state

See Documentation/power/states.txt

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-tango/Makefile |  1 +
 arch/arm/mach-tango/pm.c     | 32 ++++++++++++++++++++++++++++++++
 arch/arm/mach-tango/smc.h    |  1 +
 3 files changed, 34 insertions(+)
 create mode 100644 arch/arm/mach-tango/pm.c

(limited to 'arch')

diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
index f33935e42e77..204fcd9fe180 100644
--- a/arch/arm/mach-tango/Makefile
+++ b/arch/arm/mach-tango/Makefile
@@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
 
 obj-y += setup.o smc.o
 obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c
new file mode 100644
index 000000000000..b05c6d6f99d0
--- /dev/null
+++ b/arch/arm/mach-tango/pm.c
@@ -0,0 +1,32 @@
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include "smc.h"
+
+static int tango_pm_powerdown(unsigned long arg)
+{
+	tango_suspend(virt_to_phys(cpu_resume));
+
+	return -EIO; /* tango_suspend has failed */
+}
+
+static int tango_pm_enter(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_MEM)
+		return cpu_suspend(0, tango_pm_powerdown);
+
+	return -EINVAL;
+}
+
+static const struct platform_suspend_ops tango_pm_ops = {
+	.enter = tango_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init tango_pm_init(void)
+{
+	suspend_set_ops(&tango_pm_ops);
+	return 0;
+}
+
+late_initcall(tango_pm_init);
diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h
index 3d31f984f44c..57919539da1b 100644
--- a/arch/arm/mach-tango/smc.h
+++ b/arch/arm/mach-tango/smc.h
@@ -3,5 +3,6 @@ extern int tango_smc(unsigned int val, unsigned int service);
 #define tango_set_l2_control(val)	tango_smc(val, 0x102)
 #define tango_start_aux_core(val)	tango_smc(val, 0x104)
 #define tango_set_aux_boot_addr(val)	tango_smc(val, 0x105)
+#define tango_suspend(val)		tango_smc(val, 0x120)
 #define tango_aux_core_die(val)		tango_smc(val, 0x121)
 #define tango_aux_core_kill(val)	tango_smc(val, 0x122)
-- 
cgit v1.2.3


From efea375fa93bde40214421ba176221438176cd06 Mon Sep 17 00:00:00 2001
From: Michael Turquette <mturquette@baylibre.com>
Date: Wed, 22 Jun 2016 19:12:21 -0700
Subject: arm: meson: explicitly select clk drivers

The AmLogic clock controller code is used by both arm and arm64
architectures. Explicitly select the core code for all Meson (32-bit
arm) builds, and also select the Meson8b driver when that machine is
built.

Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-meson/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index fbce42d7390f..b6e3acc63e14 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -7,6 +7,8 @@ menuconfig ARCH_MESON
 	select CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_MESON
+	select COMMON_CLK
+	select COMMON_CLK_AMLOGIC
 
 if ARCH_MESON
 
@@ -24,5 +26,6 @@ config MACH_MESON8B
 	bool "Amlogic Meson8b SoCs support"
 	default ARCH_MESON
 	select MESON6_TIMER
+	select COMMON_CLK_MESON8B
 
 endif
-- 
cgit v1.2.3


From 50fdda702fe5c833a69aa36bbfe878319bbf443d Mon Sep 17 00:00:00 2001
From: Peter Griffin <peter.griffin@linaro.org>
Date: Wed, 11 May 2016 18:40:00 +0200
Subject: ARM: STi: Update machine _namestr to be more generic.

This string is used by dump_stack and as we now support
more SoC's than just STiH415/6 it is misleading to have
the current string in the stack trace.

This patch updates it to be more generic for the STi
family of SoCs.

So instead of looking like this

[  271.672555] Hardware name: STiH415/416 SoC with Flattened Device Tree
[  271.678998] [<c0310490>] (unwind_backtrace) from [<c030bb54>] (show_stack+0x10/0x14)
[  271.686746] [<c030bb54>] (show_stack) from [<c058bc4c>] (dump_stack+0x98/0xac)
[snip]

it now looks like this:

[    2.669879] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc3-00026-g38a1ce6-dirty #76
[    2.677973] Hardware name: STi SoC with Flattened Device Tree
[    2.683723] [<c0310490>] (unwind_backtrace) from [<c030bb54>] (show_stack+0x10/0x14)
[    2.691472] [<c030bb54>] (show_stack) from [<c058bc0c>] (dump_stack+0x98/0xac)
[snip]

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/mach-sti/board-dt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index ae10fb280a78..cfee0efc75f9 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -23,7 +23,7 @@ static const char *const stih41x_dt_match[] __initconst = {
 	NULL
 };
 
-DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
+DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 	.dt_compat	= stih41x_dt_match,
 	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
 			  L310_AUX_CTRL_DATA_PREFETCH |
-- 
cgit v1.2.3


From 7b8e0188fa717cd9abc4fb52587445b421835c2a Mon Sep 17 00:00:00 2001
From: Patrice Chotard <patrice.chotard@st.com>
Date: Tue, 28 Jun 2016 11:21:52 +0200
Subject: ARM: sti: Implement dummy L2 cache's write_sec

This patch implements the write_sec callback that handle PL310
secure registers writes.
This callback is just a stub for now, to avoid system crash.
Later, it could handle SMC calls so that TZ handles the needed writes.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/mach-sti/board-dt.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index cfee0efc75f9..e04cd1b201bb 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -23,6 +23,14 @@ static const char *const stih41x_dt_match[] __initconst = {
 	NULL
 };
 
+static void sti_l2_write_sec(unsigned long val, unsigned reg)
+{
+	/*
+	 * We can't write to secure registers as we are in non-secure
+	 * mode, until we have some SMI service available.
+	 */
+}
+
 DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 	.dt_compat	= stih41x_dt_match,
 	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
@@ -31,4 +39,5 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 			  L2C_AUX_CTRL_WAY_SIZE(4),
 	.l2c_aux_mask	= 0xc0000fff,
 	.smp		= smp_ops(sti_smp_ops),
+	.l2c_write_sec	= sti_l2_write_sec,
 MACHINE_END
-- 
cgit v1.2.3


From 3981b11fda14ea0b459043d97c68db0a614ec9f8 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Mon, 11 Jul 2016 10:48:36 +0200
Subject: ARM: s3c64xx: smartq: Avoid sparse warnings

The smartq_map_io() and smartq_machine_init() functions are used by both
SmartQ 5 and SmartQ 7 machines and exported via the mach-smartq.h header
file. However that header file is not included by the mach-smartq.c file
that implements them, causing sparse warnings.

Include mach-smartq.h from mach-smartq.c to fix these warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-smartq.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 936a63fc68d5..e0e1a729ef98 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -43,6 +43,7 @@
 #include <plat/samsung-time.h>
 
 #include "common.h"
+#include "mach-smartq.h"
 #include "regs-modem.h"
 
 #define UCON S3C2410_UCON_DEFAULT
-- 
cgit v1.2.3


From 933b11aeeda111c6af7a7350cbe0bc331b833d41 Mon Sep 17 00:00:00 2001
From: Sekhar Nori <nsekhar@ti.com>
Date: Tue, 12 Jul 2016 19:46:13 +0530
Subject: ARM: davinci: fix build break because of undeclared
 dm365_evm_snd_data

commit 6bce5efd4424 ("ARM: davinci: remove unused davinci-i2s pdata")
removed all instances of davinci-i2s pdata. However, on DM365 EVM,
the same platform data is passed to the voicecodec present on that
device.

This causes build breakage when voicecodec support is enabled:

arch/arm/mach-davinci/board-dm365-evm.c:764:17: error: 'dm365_evm_snd_data' undeclared (first use in this function)

voicecodec driver does not use the platform data as well, and
it is safe to remove it.

Fixes: 6bce5efd4424 ("ARM: davinci: remove unused davinci-i2s pdata")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
 arch/arm/mach-davinci/davinci.h         | 2 +-
 arch/arm/mach-davinci/dm365.c           | 3 +--
 3 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e832949bc767..0464999b7137 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -761,7 +761,7 @@ static __init void dm365_evm_init(void)
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	dm365_init_asp();
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
-	dm365_init_vc(&dm365_evm_snd_data);
+	dm365_init_vc();
 #endif
 	dm365_init_rtc();
 	dm365_init_ks(&dm365evm_ks_data);
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index d1f8e29f1e30..c62b90c6118a 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -92,7 +92,7 @@ int dm355_gpio_register(void);
 /* DM365 function declarations */
 void dm365_init(void);
 void dm365_init_asp(void);
-void dm365_init_vc(struct snd_platform_data *pdata);
+void dm365_init_vc(void);
 void dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 95fbfd962c79..ef3add999263 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1151,11 +1151,10 @@ void __init dm365_init_asp(void)
 	platform_device_register(&dm365_asp_device);
 }
 
-void __init dm365_init_vc(struct snd_platform_data *pdata)
+void __init dm365_init_vc(void)
 {
 	davinci_cfg_reg(DM365_EVT2_VC_TX);
 	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	dm365_vc_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_vc_device);
 }
 
-- 
cgit v1.2.3