From e6982c671c560da4a0bc5c908cbcbec12bd5991d Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Sat, 25 Jun 2005 14:54:58 -0700 Subject: [PATCH] x86_64: Change init sections for CPU hotplug support This patch adds __cpuinit and __cpuinitdata sections that need to exist past boot to support cpu hotplug. Caveat: This is done *only* for EM64T CPU Hotplug support, on request from Andi Kleen. Much of the generic hotplug code in kernel, and none of the other archs that support CPU hotplug today, i386, ia64, ppc64, s390 and parisc dont mark sections with __cpuinit, but only mark them as __devinit, and __devinitdata. If someone is motivated to change generic code, we need to make sure all existing hotplug code does not break, on other arch's that dont use __cpuinit, and __cpudevinit. Signed-off-by: Ashok Raj Acked-by: Andi Kleen Acked-by: Zwane Mwaikambo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/apic.c | 8 ++++---- arch/x86_64/kernel/i387.c | 2 +- arch/x86_64/kernel/mce.c | 8 ++++---- arch/x86_64/kernel/mce_intel.c | 4 ++-- arch/x86_64/kernel/nmi.c | 4 ++-- arch/x86_64/kernel/process.c | 2 +- arch/x86_64/kernel/setup.c | 18 +++++++++--------- arch/x86_64/kernel/setup64.c | 6 +++--- arch/x86_64/kernel/smpboot.c | 15 +++++---------- arch/x86_64/mm/numa.c | 2 +- 10 files changed, 32 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index f8e6cc4fecd4..2a6c893ccf60 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -285,7 +285,7 @@ void __init init_bsp_APIC(void) apic_write_around(APIC_LVT1, value); } -void __init setup_local_APIC (void) +void __cpuinit setup_local_APIC (void) { unsigned int value, ver, maxlvt; @@ -534,7 +534,7 @@ static struct sys_device device_lapic = { .cls = &lapic_sysclass, }; -static void __init apic_pm_activate(void) +static void __cpuinit apic_pm_activate(void) { apic_pm_state.active = 1; } @@ -774,14 +774,14 @@ void __init setup_boot_APIC_clock (void) local_irq_enable(); } -void __init setup_secondary_APIC_clock(void) +void __cpuinit setup_secondary_APIC_clock(void) { local_irq_disable(); /* FIXME: Do we need this? --RR */ setup_APIC_timer(calibration_result); local_irq_enable(); } -void __init disable_APIC_timer(void) +void __cpuinit disable_APIC_timer(void) { if (using_apic_timer) { unsigned long v; diff --git a/arch/x86_64/kernel/i387.c b/arch/x86_64/kernel/i387.c index ba139cac57ce..d9b22b633e39 100644 --- a/arch/x86_64/kernel/i387.c +++ b/arch/x86_64/kernel/i387.c @@ -42,7 +42,7 @@ void mxcsr_feature_mask_init(void) * Called at bootup to set up the initial FPU state that is later cloned * into all processes. */ -void __init fpu_init(void) +void __cpuinit fpu_init(void) { unsigned long oldcr0 = read_cr0(); extern void __bad_fxsave_alignment(void); diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index 3a89d735a4f6..7ab15c8ab95f 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -327,7 +327,7 @@ static void mce_init(void *dummy) } /* Add per CPU specific workarounds here */ -static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) +static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) { /* This should be disabled by the BIOS, but isn't always */ if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) { @@ -337,7 +337,7 @@ static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) } } -static void __init mce_cpu_features(struct cpuinfo_x86 *c) +static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) { switch (c->x86_vendor) { case X86_VENDOR_INTEL: @@ -352,7 +352,7 @@ static void __init mce_cpu_features(struct cpuinfo_x86 *c) * Called for each booted CPU to set up machine checks. * Must be called with preempt off. */ -void __init mcheck_init(struct cpuinfo_x86 *c) +void __cpuinit mcheck_init(struct cpuinfo_x86 *c) { static cpumask_t mce_cpus __initdata = CPU_MASK_NONE; @@ -542,7 +542,7 @@ ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(tolerant,tolerant,) ACCESSOR(check_interval,check_interval,mce_restart()) -static __init int mce_init_device(void) +static __cpuinit int mce_init_device(void) { int err; if (!mce_available(&boot_cpu_data)) diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c index 4db9a640069f..0be0a7959814 100644 --- a/arch/x86_64/kernel/mce_intel.c +++ b/arch/x86_64/kernel/mce_intel.c @@ -42,7 +42,7 @@ done: irq_exit(); } -static void __init intel_init_thermal(struct cpuinfo_x86 *c) +static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; int tm2 = 0; @@ -93,7 +93,7 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c) return; } -void __init mce_intel_feature_init(struct cpuinfo_x86 *c) +void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c) { intel_init_thermal(c); } diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 31c0f2e6ac91..4e44d6e6b7e5 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -98,7 +98,7 @@ static unsigned int nmi_p4_cccr_val; (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) -static __init inline int nmi_known_cpu(void) +static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: @@ -110,7 +110,7 @@ static __init inline int nmi_known_cpu(void) } /* Run after command line and cpu_init init, but before all other checks */ -void __init nmi_watchdog_default(void) +void __cpuinit nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index e59d1f9d6163..15fa35a81a72 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -204,7 +204,7 @@ static void mwait_idle(void) } } -void __init select_idle_routine(const struct cpuinfo_x86 *c) +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { static int printed; if (cpu_has(c, X86_FEATURE_MWAIT)) { diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 000015dd5a8b..ca9a915a6d4a 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -676,7 +676,7 @@ void __init setup_arch(char **cmdline_p) #endif } -static int __init get_model_name(struct cpuinfo_x86 *c) +static int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -692,7 +692,7 @@ static int __init get_model_name(struct cpuinfo_x86 *c) } -static void __init display_cacheinfo(struct cpuinfo_x86 *c) +static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -803,7 +803,7 @@ static int __init init_amd(struct cpuinfo_x86 *c) return r; } -static void __init detect_ht(struct cpuinfo_x86 *c) +static void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP u32 eax, ebx, ecx, edx; @@ -864,7 +864,7 @@ static void __init detect_ht(struct cpuinfo_x86 *c) /* * find out the number of processor cores on the die */ -static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax; @@ -882,7 +882,7 @@ static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -static void __init init_intel(struct cpuinfo_x86 *c) +static void __cpuinit init_intel(struct cpuinfo_x86 *c) { /* Cache sizes */ unsigned n; @@ -902,7 +902,7 @@ static void __init init_intel(struct cpuinfo_x86 *c) c->x86_num_cores = intel_num_cpu_cores(c); } -void __init get_cpu_vendor(struct cpuinfo_x86 *c) +void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; @@ -923,7 +923,7 @@ struct cpu_model_info { /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu below. */ -void __init early_identify_cpu(struct cpuinfo_x86 *c) +void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) { u32 tfms; @@ -977,7 +977,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c) /* * This does the hard work of actually picking apart the CPU stuff... */ -void __init identify_cpu(struct cpuinfo_x86 *c) +void __cpuinit identify_cpu(struct cpuinfo_x86 *c) { int i; u32 xlvl; @@ -1054,7 +1054,7 @@ void __init identify_cpu(struct cpuinfo_x86 *c) } -void __init print_cpu_info(struct cpuinfo_x86 *c) +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { if (c->x86_model_id[0]) printk("%s", c->x86_model_id); diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 678b7ac33b8b..f2b9c6bc999a 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -29,7 +29,7 @@ char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,}; -cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; +cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; @@ -171,7 +171,7 @@ void syscall_init(void) wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); } -void __init check_efer(void) +void __cpuinit check_efer(void) { unsigned long efer; @@ -188,7 +188,7 @@ void __init check_efer(void) * 'CPU state barrier', nothing should get across. * A lot of state is already set up in PDA init. */ -void __init cpu_init (void) +void __cpuinit cpu_init (void) { #ifdef CONFIG_SMP int cpu = stack_smp_processor_id(); diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index f1ec0f345941..bc98a6722cba 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -58,11 +58,6 @@ #include #include -/* Change for real CPU hotplug. Note other files need to be fixed - first too. */ -#define __cpuinit __init -#define __cpuinitdata __initdata - /* Number of siblings per CPU package */ int smp_num_siblings = 1; /* Package ID of each logical CPU */ @@ -823,7 +818,7 @@ static __cpuinit void smp_cleanup_boot(void) * * RED-PEN audit/test this more. I bet there is more state messed up here. */ -static __cpuinit void disable_smp(void) +static __init void disable_smp(void) { cpu_present_map = cpumask_of_cpu(0); cpu_possible_map = cpumask_of_cpu(0); @@ -838,7 +833,7 @@ static __cpuinit void disable_smp(void) /* * Handle user cpus=... parameter. */ -static __cpuinit void enforce_max_cpus(unsigned max_cpus) +static __init void enforce_max_cpus(unsigned max_cpus) { int i, k; k = 0; @@ -855,7 +850,7 @@ static __cpuinit void enforce_max_cpus(unsigned max_cpus) /* * Various sanity checks. */ -static int __cpuinit smp_sanity_check(unsigned max_cpus) +static int __init smp_sanity_check(unsigned max_cpus) { if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { printk("weird, boot CPU (#%d) not listed by the BIOS.\n", @@ -913,7 +908,7 @@ static int __cpuinit smp_sanity_check(unsigned max_cpus) * Prepare for SMP bootup. The MP table or ACPI has been read * earlier. Just do some sanity checking here and enable APIC mode. */ -void __cpuinit smp_prepare_cpus(unsigned int max_cpus) +void __init smp_prepare_cpus(unsigned int max_cpus) { int i; @@ -1019,7 +1014,7 @@ int __cpuinit __cpu_up(unsigned int cpu) /* * Finish the SMP boot. */ -void __cpuinit smp_cpus_done(unsigned int max_cpus) +void __init smp_cpus_done(unsigned int max_cpus) { zap_low_mappings(); smp_cleanup_boot(); diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 84cde796ecb1..ac61c186eb02 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -251,7 +251,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } -__init void numa_add_cpu(int cpu) +__cpuinit void numa_add_cpu(int cpu) { /* BP is initialized elsewhere */ if (cpu) -- cgit v1.2.3