From 58d9ce7d751fa11c6c8ea5dcd4d63b320aae1363 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 22 Jan 2007 20:40:34 -0800 Subject: [PATCH] Revert nmi_known_cpu() check during boot option parsing Commit f2802e7f571c05f9a901b1f5bd144aa730ccc88e and its x86 version (b7471c6da94d30d3deadc55986cc38d1ff57f9ca) adds nmi_known_cpu() check while parsing boot options in x86_64 and i386. With that, "nmi_watchdog=2" stops working for me on Intel Core 2 CPU based system. The problem is, setup_nmi_watchdog is called while parsing the boot option and identify_cpu is not done yet. So, the return value of nmi_known_cpu() is not valid at this point. So revert that check. This should not have any adverse effect as the nmi_known_cpu() check is done again later in enable_lapic_nmi_watchdog(). Signed-off-by: Venkatesh Pallipadi Cc: Don Zickus Cc: Andi Kleen Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/nmi.c | 8 +------- arch/x86_64/kernel/nmi.c | 2 -- 2 files changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index a5e34d655965..1a6f8bb8881c 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -310,13 +310,7 @@ static int __init setup_nmi_watchdog(char *str) if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) return 0; - /* - * If any other x86 CPU has a local APIC, then - * please test the NMI stuff there and send me the - * missing bits. Right now Intel P6/P4 and AMD K7 only. - */ - if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) - return 0; /* no lapic support */ + nmi_watchdog = nmi; return 1; } diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 186aebbae32d..9cb42ecb7f89 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -302,8 +302,6 @@ int __init setup_nmi_watchdog(char *str) if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) return 0; - if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0)) - return 0; /* no lapic support */ nmi_watchdog = nmi; return 1; } -- cgit v1.2.3 From 0dbe5a111382fd1320ff4b1d889e5b8c41290619 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 22 Jan 2007 20:40:36 -0800 Subject: [PATCH] paravirt: mark the paravirt_ops export internal The paravirt subsystem is still in flux so all exports from it are definitely internal use only. The APIs around this /will/ change. Signed-off-by: Ingo Molnar Cc: Andi Kleen Cc: Zachary Amsden Cc: Jeremy Fitzhardinge Acked-by: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/paravirt.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index 3dceab5828f1..e55fd05da0f5 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -566,4 +566,11 @@ struct paravirt_ops paravirt_ops = { .irq_enable_sysexit = native_irq_enable_sysexit, .iret = native_iret, }; -EXPORT_SYMBOL(paravirt_ops); + +/* + * NOTE: CONFIG_PARAVIRT is experimental and the paravirt_ops + * semantics are subject to change. Hence we only do this + * internal-only export of this, until it gets sorted out and + * all lowlevel CPU ops used by modules are separately exported. + */ +EXPORT_SYMBOL_GPL(paravirt_ops); -- cgit v1.2.3 From ac8be955049dab828a68b9c68a75144832f8289f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 20 Jan 2007 00:18:01 +0000 Subject: [MIPS] SMTC: Instant IPI replay. SMTC pseudo-interrupts between TCs are deferred and queued if the target TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these queued IPIs were serviced on return to user mode, or on entry into the kernel idle loop. The INSTANT_REPLAY option dispatches them as part of local_irq_restore() processing, which adds runtime overhead (hence the option to turn it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 14 ++++++++++++ arch/mips/kernel/smtc.c | 54 +++++++++++++++++++++++++++------------------ include/asm-mips/irqflags.h | 22 ++++++++++++++++++ 3 files changed, 69 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index fd2ff0698a85..bbd386f572d9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1568,6 +1568,20 @@ config MIPS_MT_FPAFF depends on MIPS_MT default y +config MIPS_MT_SMTC_INSTANT_REPLAY + bool "Low-latency Dispatch of Deferred SMTC IPIs" + depends on MIPS_MT_SMTC + default y + help + SMTC pseudo-interrupts between TCs are deferred and queued + if the target TC is interrupt-inhibited (IXMT). In the first + SMTC prototypes, these queued IPIs were serviced on return + to user mode, or on entry into the kernel idle loop. The + INSTANT_REPLAY option dispatches them as part of local_irq_restore() + processing, which adds runtime overhead (hence the option to turn + it off), but ensures that IPIs are handled promptly even under + heavy I/O interrupt load. + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a8b387197d5b..44238ab2fc99 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1017,6 +1017,33 @@ void setup_cross_vpe_interrupts(void) * SMTC-specific hacks invoked from elsewhere in the kernel. */ +void smtc_ipi_replay(void) +{ + /* + * To the extent that we've ever turned interrupts off, + * we may have accumulated deferred IPIs. This is subtle. + * If we use the smtc_ipi_qdepth() macro, we'll get an + * exact number - but we'll also disable interrupts + * and create a window of failure where a new IPI gets + * queued after we test the depth but before we re-enable + * interrupts. So long as IXMT never gets set, however, + * we should be OK: If we pick up something and dispatch + * it here, that's great. If we see nothing, but concurrent + * with this operation, another TC sends us an IPI, IXMT + * is clear, and we'll handle it as a real pseudo-interrupt + * and not a pseudo-pseudo interrupt. + */ + if (IPIQ[smp_processor_id()].depth > 0) { + struct smtc_ipi *pipi; + extern void self_ipi(struct smtc_ipi *); + + while ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()]))) { + self_ipi(pipi); + smtc_cpu_stats[smp_processor_id()].selfipis++; + } + } +} + void smtc_idle_loop_hook(void) { #ifdef SMTC_IDLE_HOOK_DEBUG @@ -1113,29 +1140,14 @@ void smtc_idle_loop_hook(void) if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* SMTC_IDLE_HOOK_DEBUG */ + /* - * To the extent that we've ever turned interrupts off, - * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, - * we should be OK: If we pick up something and dispatch - * it here, that's great. If we see nothing, but concurrent - * with this operation, another TC sends us an IPI, IXMT - * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * Replay any accumulated deferred IPIs. If "Instant Replay" + * is in use, there should never be any. */ - if (IPIQ[smp_processor_id()].depth > 0) { - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) { - self_ipi(pipi); - smtc_cpu_stats[smp_processor_id()].selfipis++; - } - } +#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY + smtc_ipi_replay(); +#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ } void smtc_soft_dump(void) diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 46bf5de5ac72..af3b07dfad4b 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -15,6 +15,27 @@ #include +/* + * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs, + * at the cost of branch and call overhead on each local_irq_restore() + */ + +#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY + +extern void smtc_ipi_replay(void); + +#define irq_restore_epilog(flags) \ +do { \ + if (!(flags & 0x0400)) \ + smtc_ipi_replay(); \ +} while (0) + +#else + +#define irq_restore_epilog(ignore) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + __asm__ ( " .macro raw_local_irq_enable \n" " .set push \n" @@ -193,6 +214,7 @@ do { \ : "=r" (__tmp1) \ : "0" (flags) \ : "memory"); \ + irq_restore_epilog(flags); \ } while(0) static inline int raw_irqs_disabled_flags(unsigned long flags) -- cgit v1.2.3 From 364ca8a897eadb2f0e76b7f0ffe94168f6d83d66 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 22 Jan 2007 23:01:06 +0900 Subject: [MIPS] Vr41xx: Fix after GENERIC_HARDIRQS_NO__DO_IRQ change Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/irq.c | 12 +++-- drivers/char/vr41xx_giu.c | 114 +++++++++++++++++++----------------------- 2 files changed, 61 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index 397ba94cd7ec..16decf4ac2f4 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -1,7 +1,7 @@ /* * Interrupt handing routines for NEC VR4100 series. * - * Copyright (C) 2005 Yoichi Yuasa + * Copyright (C) 2005-2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -73,13 +73,19 @@ static void irq_dispatch(unsigned int irq) if (cascade->get_irq != NULL) { unsigned int source_irq = irq; desc = irq_desc + source_irq; - desc->chip->ack(source_irq); + if (desc->chip->mask_ack) + desc->chip->mask_ack(source_irq); + else { + desc->chip->mask(source_irq); + desc->chip->ack(source_irq); + } irq = cascade->get_irq(irq); if (irq < 0) atomic_inc(&irq_err_count); else irq_dispatch(irq); - desc->chip->end(source_irq); + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(source_irq); } else do_IRQ(irq); } diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c index a744dad9cf45..0cea8d4907df 100644 --- a/drivers/char/vr41xx_giu.c +++ b/drivers/char/vr41xx_giu.c @@ -3,7 +3,7 @@ * * Copyright (C) 2002 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2003-2005 Yoichi Yuasa + * Copyright (C) 2003-2007 Yoichi Yuasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -125,30 +125,17 @@ static inline uint16_t giu_clear(uint16_t offset, uint16_t clear) return data; } -static unsigned int startup_giuint_low_irq(unsigned int irq) +static void ack_giuint_low(unsigned int irq) { - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq); - giu_write(GIUINTSTATL, 1 << pin); - giu_set(GIUINTENL, 1 << pin); - - return 0; + giu_write(GIUINTSTATL, 1 << GPIO_PIN_OF_IRQ(irq)); } -static void shutdown_giuint_low_irq(unsigned int irq) +static void mask_giuint_low(unsigned int irq) { giu_clear(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); } -static void enable_giuint_low_irq(unsigned int irq) -{ - giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); -} - -#define disable_giuint_low_irq shutdown_giuint_low_irq - -static void ack_giuint_low_irq(unsigned int irq) +static void mask_ack_giuint_low(unsigned int irq) { unsigned int pin; @@ -157,46 +144,30 @@ static void ack_giuint_low_irq(unsigned int irq) giu_write(GIUINTSTATL, 1 << pin); } -static void end_giuint_low_irq(unsigned int irq) +static void unmask_giuint_low(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); + giu_set(GIUINTENL, 1 << GPIO_PIN_OF_IRQ(irq)); } -static struct hw_interrupt_type giuint_low_irq_type = { - .typename = "GIUINTL", - .startup = startup_giuint_low_irq, - .shutdown = shutdown_giuint_low_irq, - .enable = enable_giuint_low_irq, - .disable = disable_giuint_low_irq, - .ack = ack_giuint_low_irq, - .end = end_giuint_low_irq, +static struct irq_chip giuint_low_irq_chip = { + .name = "GIUINTL", + .ack = ack_giuint_low, + .mask = mask_giuint_low, + .mask_ack = mask_ack_giuint_low, + .unmask = unmask_giuint_low, }; -static unsigned int startup_giuint_high_irq(unsigned int irq) +static void ack_giuint_high(unsigned int irq) { - unsigned int pin; - - pin = GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET; - giu_write(GIUINTSTATH, 1 << pin); - giu_set(GIUINTENH, 1 << pin); - - return 0; + giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); } -static void shutdown_giuint_high_irq(unsigned int irq) +static void mask_giuint_high(unsigned int irq) { giu_clear(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); } -static void enable_giuint_high_irq(unsigned int irq) -{ - giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); -} - -#define disable_giuint_high_irq shutdown_giuint_high_irq - -static void ack_giuint_high_irq(unsigned int irq) +static void mask_ack_giuint_high(unsigned int irq) { unsigned int pin; @@ -205,20 +176,17 @@ static void ack_giuint_high_irq(unsigned int irq) giu_write(GIUINTSTATH, 1 << pin); } -static void end_giuint_high_irq(unsigned int irq) +static void unmask_giuint_high(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); + giu_set(GIUINTENH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET)); } -static struct hw_interrupt_type giuint_high_irq_type = { - .typename = "GIUINTH", - .startup = startup_giuint_high_irq, - .shutdown = shutdown_giuint_high_irq, - .enable = enable_giuint_high_irq, - .disable = disable_giuint_high_irq, - .ack = ack_giuint_high_irq, - .end = end_giuint_high_irq, +static struct irq_chip giuint_high_irq_chip = { + .name = "GIUINTH", + .ack = ack_giuint_high, + .mask = mask_giuint_high, + .mask_ack = mask_ack_giuint_high, + .unmask = unmask_giuint_high, }; static int giu_get_irq(unsigned int irq) @@ -282,9 +250,15 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_ break; } } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_edge_irq); } else { giu_clear(GIUINTTYPL, mask); giu_clear(GIUINTHTSELL, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_low_irq_chip, + handle_level_irq); } giu_write(GIUINTSTATL, mask); } else if (pin < GIUINT_HIGH_MAX) { @@ -311,9 +285,15 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_ break; } } + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_edge_irq); } else { giu_clear(GIUINTTYPH, mask); giu_clear(GIUINTHTSELH, mask); + set_irq_chip_and_handler(GIU_IRQ(pin), + &giuint_high_irq_chip, + handle_level_irq); } giu_write(GIUINTSTATH, mask); } @@ -617,10 +597,11 @@ static const struct file_operations gpio_fops = { static int __devinit giu_probe(struct platform_device *dev) { unsigned long start, size, flags = 0; - unsigned int nr_pins = 0; + unsigned int nr_pins = 0, trigger, i, pin; struct resource *res1, *res2 = NULL; void *base; - int retval, i; + struct irq_chip *chip; + int retval; switch (current_cpu_data.cputype) { case CPU_VR4111: @@ -688,11 +669,20 @@ static int __devinit giu_probe(struct platform_device *dev) giu_write(GIUINTENL, 0); giu_write(GIUINTENH, 0); + trigger = giu_read(GIUINTTYPH) << 16; + trigger |= giu_read(GIUINTTYPL); for (i = GIU_IRQ_BASE; i <= GIU_IRQ_LAST; i++) { - if (i < GIU_IRQ(GIUINT_HIGH_OFFSET)) - irq_desc[i].chip = &giuint_low_irq_type; + pin = GPIO_PIN_OF_IRQ(i); + if (pin < GIUINT_HIGH_OFFSET) + chip = &giuint_low_irq_chip; else - irq_desc[i].chip = &giuint_high_irq_type; + chip = &giuint_high_irq_chip; + + if (trigger & (1 << pin)) + set_irq_chip_and_handler(i, chip, handle_edge_irq); + else + set_irq_chip_and_handler(i, chip, handle_level_irq); + } return cascade_irq(GIUINT_IRQ, giu_get_irq); -- cgit v1.2.3 From fb1d50418ef09a6a43b3928ff78d433914ea954d Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 08:44:41 +0100 Subject: [ARM] 4084/1: Remove CONFIG_DEBUG_WAITQ Remove the legacy CONFIG_DEBUG_WAITQ from the SAM9260-EK and SAM9261-EK default configuration files. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/configs/at91sam9260ek_defconfig | 1 - arch/arm/configs/at91sam9261ek_defconfig | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 79049206dfa5..46b0c734aeb9 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -923,7 +923,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 784ad7c0186d..fcd8fa091e9d 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -1079,7 +1079,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -- cgit v1.2.3 From a14d527306dc7dbc38e4607c3cc3a50a600fc98b Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 09:03:42 +0100 Subject: [ARM] 4086/1: AT91: Whitespace cleanup A couple of whitespace cleanups, mainly in the AT91 header files. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/at91rm9200_devices.c | 2 +- drivers/serial/atmel_serial.c | 4 ++-- drivers/serial/atmel_serial.h | 2 +- include/asm-arm/arch-at91rm9200/at91_ecc.h | 8 ++++---- include/asm-arm/arch-at91rm9200/at91_pmc.h | 2 +- include/asm-arm/arch-at91rm9200/at91_rtc.h | 16 ++++++++-------- include/asm-arm/arch-at91rm9200/at91rm9200.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h | 2 +- include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h | 4 ++-- include/asm-arm/arch-at91rm9200/at91sam926x_mc.h | 8 ++++---- 10 files changed, 25 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c index 4641b99db0ee..57fac7203fe4 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c +++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c @@ -272,7 +272,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ /* nWAIT is _not_ a default setting */ - at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ + at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ cf_data = *data; platform_device_register(&at91rm9200_cf_device); diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index ed7f7209ea59..1f9222c2e656 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -689,9 +689,9 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct struct atmel_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; - port->fifosize = 1; + port->fifosize = 1; port->line = pdev->id; port->dev = &pdev->dev; diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h index fe1763b2a6d5..11b44360e108 100644 --- a/drivers/serial/atmel_serial.h +++ b/drivers/serial/atmel_serial.h @@ -106,7 +106,7 @@ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */ +#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h index fddf256a98d3..5c564ede5c5d 100644 --- a/include/asm-arm/arch-at91rm9200/at91_ecc.h +++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h @@ -14,7 +14,7 @@ #define AT91_ECC_H #define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ -#define AT91_ECC_RST (1 << 0) /* Reset parity */ +#define AT91_ECC_RST (1 << 0) /* Reset parity */ #define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ @@ -23,16 +23,16 @@ #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h index de8c3da74a01..c3b489d09b6c 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pmc.h +++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h @@ -61,7 +61,7 @@ #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) #define AT91_PMC_PRES_4 (2 << 2) #define AT91_PMC_PRES_8 (3 << 2) diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h index 6e5065d56260..095fe0883102 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rtc.h +++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h @@ -21,21 +21,21 @@ #define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ #define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ #define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) #define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) #define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ #define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ #define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ #define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 4d51177efddd..c569b6a21a42 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -274,7 +274,7 @@ #define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */ #define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */ #define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */ -#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ #define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */ #define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */ #define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h index 746d973705bf..78f6b4917b8b 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h @@ -58,7 +58,7 @@ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h index ab25f9e94d69..ec88efabbe6c 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h @@ -43,8 +43,8 @@ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ #define AT91_MATRIX_CS3A_SMC (0 << 3) #define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h index 8ac797e39a14..972e7531c7f4 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h @@ -33,14 +33,14 @@ #define AT91_SDRAMC_NC_9 (1 << 0) #define AT91_SDRAMC_NC_10 (2 << 0) #define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ #define AT91_SDRAMC_NR_11 (0 << 2) #define AT91_SDRAMC_NR_12 (1 << 2) #define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ #define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ #define AT91_SDRAMC_CAS_1 (1 << 5) #define AT91_SDRAMC_CAS_2 (2 << 5) #define AT91_SDRAMC_CAS_3 (3 << 5) -- cgit v1.2.3 From e9d10a16ea76f42ea9ce58508e4af7c52acf1e40 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 12:47:51 +0100 Subject: [ARM] 4087/1: AT91: CPU reset for SAM9x processors This patch implements CPU and peripheral reset on AT91SAM9260 and AT91SAM9261. Original patch from Wojtek Kaniewski. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/at91sam9260.c | 3 ++- arch/arm/mach-at91rm9200/at91sam9261.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c index 203f073a53e6..b14871adc300 100644 --- a/arch/arm/mach-at91rm9200/at91sam9260.c +++ b/arch/arm/mach-at91rm9200/at91sam9260.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "generic.h" #include "clock.h" @@ -212,7 +213,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = { static void at91sam9260_reset(void) { -#warning "Implement CPU reset" + at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c index 5a82f35da2e9..d242bb885c6d 100644 --- a/arch/arm/mach-at91rm9200/at91sam9261.c +++ b/arch/arm/mach-at91rm9200/at91sam9261.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "generic.h" #include "clock.h" @@ -207,7 +208,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = { static void at91sam9261_reset(void) { -#warning "Implement CPU reset" + at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } -- cgit v1.2.3 From 3ea163e44c041b9e1d7314998dfbfd4fbc6eea20 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 9 Jan 2007 13:47:29 +0100 Subject: [ARM] 4089/1: AT91: GPIO wake IRQ cleanup Cleanup of at91 platform level gpio wake and suspend/resume logic. The GPIO core now delegates wakeups to the parent AIC by refcounting, and delegates clock management to the clock API. This makes these system modules more independent of each other, which is cleaner and will also help with the AT91SAM9263 (where some GPIO controllers share the same irq and clock). Original patch by David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/gpio.c | 39 +++++++++++++-------------------------- 1 file changed, 13 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 3f188508c391..af22659c8a28 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include "generic.h" @@ -224,17 +223,17 @@ static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(unsigned pin, unsigned state) { unsigned mask = pin_to_mask(pin); + unsigned bank = (pin - PIN_BASE) / 32; - pin -= PIN_BASE; - pin /= 32; - - if (unlikely(pin >= MAX_GPIO_BANKS)) + if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; if (state) - wakeups[pin] |= mask; + wakeups[bank] |= mask; else - wakeups[pin] &= ~mask; + wakeups[bank] &= ~mask; + + set_irq_wake(gpio[bank].id, state); return 0; } @@ -246,29 +245,15 @@ void at91_gpio_suspend(void) for (i = 0; i < gpio_banks; i++) { u32 pio = gpio[i].offset; - /* - * Note: drivers should have disabled GPIO interrupts that - * aren't supposed to be wakeup sources. - * But that is not much good on ARM..... disable_irq() does - * not update the hardware immediately, so the hardware mask - * (IMR) has the wrong value (not current, too much is - * permitted). - * - * Our workaround is to disable all non-wakeup IRQs ... - * which is exactly what correct drivers asked for in the - * first place! - */ backups[i] = at91_sys_read(pio + PIO_IMR); at91_sys_write(pio + PIO_IDR, backups[i]); at91_sys_write(pio + PIO_IER, wakeups[i]); - if (!wakeups[i]) { - disable_irq_wake(gpio[i].id); - at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id); - } else { - enable_irq_wake(gpio[i].id); + if (!wakeups[i]) + clk_disable(gpio[i].clock); + else { #ifdef CONFIG_PM_DEBUG - printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); #endif } } @@ -281,9 +266,11 @@ void at91_gpio_resume(void) for (i = 0; i < gpio_banks; i++) { u32 pio = gpio[i].offset; + if (!wakeups[i]) + clk_enable(gpio[i].clock); + at91_sys_write(pio + PIO_IDR, wakeups[i]); at91_sys_write(pio + PIO_IER, backups[i]); - at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id); } } -- cgit v1.2.3 From 5225cd8079484ed27cd52040e8584616d1ef1e2c Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 12 Jan 2007 09:57:22 +0100 Subject: [ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definition The transition latency has to be defined and reasonably small to allow on-demand and conservative governors. The value has been defined according to manual. The imx_set_target() protected against seen out of range requests now. Signed-off-by: Pavel Pisa Acked-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-imx/cpufreq.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index ac5f99895660..4f66e90db74f 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -184,6 +184,17 @@ static int imx_set_target(struct cpufreq_policy *policy, long sysclk; unsigned int bclk_div = 1; + /* + * Some governors do not respects CPU and policy lower limits + * which leads to bad things (division by zero etc), ensure + * that such things do not happen. + */ + if(target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + + if(target_freq < policy->min) + target_freq = policy->min; + freq = target_freq * 1000; pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", @@ -258,7 +269,8 @@ static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy) policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.min_freq = 8000; policy->cpuinfo.max_freq = 200000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + /* Manual states, that PLL stabilizes in two CLK32 periods */ + policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32; return 0; } -- cgit v1.2.3 From 6c3c5bb3c68b932ece9f92b9d201196d537cb99c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 16 Jan 2007 12:33:35 +0100 Subject: [ARM] 4095/1: S3C24XX: Fix GPIO set for Bank A GPIO bank A can only be output or a special function, and the regs-gpio.h header has mistakenly got this as input or output. The mistake is carried on into the gpio.c s3c2410_gpio_cfgpin() call which will set the wrong value if S3C2410_GPIO_OUTPUT is passed. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/gpio.c | 1 + include/asm-arm/arch-s3c2410/regs-gpio.h | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index ba346546150b..d1740643a135 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -57,6 +57,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) case S3C2410_GPIO_SFN2: case S3C2410_GPIO_SFN3: if (pin < S3C2410_GPIO_BANKB) { + function -= 1; function &= 1; function <<= S3C2410_GPIO_OFFSET(pin); } else { diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index b2893e32a236..eae91694edcd 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -52,10 +52,10 @@ /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) +#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ #define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) #define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ +#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ /* register address for the GPIO registers. -- cgit v1.2.3 From 30f0e0f4153918a22d802b415980974514139389 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 16 Jan 2007 12:56:58 +0100 Subject: [ARM] 4096/1: S3C24XX: change return code form s3c2410_gpio_getcfg() The s3c2410_gpio_getcfg() currently returns a value which is dependant on the GPIO no passed in. Now we have more generic constants it is sensible to use those as return codes so that any function dealing with >1 GPIO does not need to do it's own number processing. Since this function is only currently used in pm.c, it is easy to fixup (and correct pm.c to use the generic constants) Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/gpio.c | 11 +++++++---- arch/arm/mach-s3c2410/pm.c | 7 +++---- 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index d1740643a135..f6fb215bb48c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -84,15 +84,18 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin); unsigned int s3c2410_gpio_getcfg(unsigned int pin) { void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; + unsigned long val = __raw_readl(base); if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); + val >>= S3C2410_GPIO_OFFSET(pin); + val &= 1; + val += 1; } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; + val >>= S3C2410_GPIO_OFFSET(pin)*2; + val &= 3; } - return __raw_readl(base) & mask; + return val | S3C2410_GPIO_INPUT; } EXPORT_SYMBOL(s3c2410_gpio_getcfg); diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 00834097eb82..ebf294dd31da 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -451,15 +451,14 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) irqstate = s3c_irqwake_eintmask & (1L<>= S3C2410_GPIO_OFFSET(pin)*2; if (!irqstate) { - if (pinstate == 0x02) + if (pinstate == S3C2410_GPIO_IRQ) DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); } else { - if (pinstate == 0x02) { + if (pinstate == S3C2410_GPIO_IRQ) { DBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, 0x00); + s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } -- cgit v1.2.3 From 204ecae4e10c235e6987cb7b2809a665511ab174 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 16 Jan 2007 14:01:47 +0000 Subject: [ARM] Fix show_mem() for discontigmem show_mem() was assuming incorrectly that the mem_map for any node started at PFN 0. This is obviously wrong; fix it to take account of node_start_pfn. Signed-off-by: Russell King --- arch/arm/mm/init.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index b5814b4b6f35..7760193e74cc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -52,15 +52,18 @@ void show_mem(void) printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_node(node) { + pg_data_t *n = NODE_DATA(node); + struct page *map = n->node_mem_map - n->node_start_pfn; + for_each_nodebank (i,mi,node) { unsigned int pfn1, pfn2; struct page *page, *end; - pfn1 = mi->bank[i].start >> PAGE_SHIFT; - pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT; + pfn1 = __phys_to_pfn(mi->bank[i].start); + pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start); - page = NODE_MEM_MAP(node) + pfn1; - end = NODE_MEM_MAP(node) + pfn2; + page = map + pfn1; + end = map + pfn2; do { total++; -- cgit v1.2.3 From 87b865776d2510fc98cdf789c59b8980432ef93a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 16 Jan 2007 16:53:41 +0000 Subject: [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 8bcb838e5444..bd78058b7178 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Dec 7 17:19:20 2006 +# Last update: Tue Jan 16 16:52:56 2007 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1219,3 +1219,26 @@ zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 hitrack MACH_HITRACK HITRACK 1208 syme1 MACH_SYME1 SYME1 1209 syhl1 MACH_SYHL1 SYHL1 1210 +empca400 MACH_EMPCA400 EMPCA400 1211 +em7210 MACH_EM7210 EM7210 1212 +htchermes MACH_HTCHERMES HTCHERMES 1213 +eti_c1 MACH_ETI_C1 ETI_C1 1214 +mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215 +ac100 MACH_AC100 AC100 1216 +sneetch MACH_SNEETCH SNEETCH 1217 +studentmate MACH_STUDENTMATE STUDENTMATE 1218 +zir2410 MACH_ZIR2410 ZIR2410 1219 +zir2413 MACH_ZIR2413 ZIR2413 1220 +dlonip3 MACH_DLONIP3 DLONIP3 1221 +instream MACH_INSTREAM INSTREAM 1222 +ambarella MACH_AMBARELLA AMBARELLA 1223 +nevis MACH_NEVIS NEVIS 1224 +htc_trinity MACH_HTC_TRINITY HTC_TRINITY 1225 +ql202b MACH_QL202B QL202B 1226 +vpac270 MACH_VPAC270 VPAC270 1227 +rd129 MACH_RD129 RD129 1228 +htcwizard MACH_HTCWIZARD HTCWIZARD 1229 +xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 +zylonite MACH_ZYLONITE ZYLONITE 1233 +gene1270 MACH_GENE1270 GENE1270 1234 -- cgit v1.2.3 From 7f215abc69302dc027f024fe656e4841063e8fe8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 18 Jan 2007 20:36:00 +0100 Subject: [ARM] 4100/1: iop3xx: fix cpu mask for iop333 cosmetic fix so iop333 is not reported as ixp46x iop333 cpuid = 0x69054210 Signed-off-by: Dan Williams Signed-off-by: Russell King --- arch/arm/mm/proc-xscale.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 490e11b34231..d29fe927ee9e 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -708,7 +708,7 @@ __8032x_proc_info: .type __8033x_proc_info,#object __8033x_proc_info: .long 0x69054010 - .long 0xffffff30 + .long 0xfffffd30 .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ -- cgit v1.2.3 From d4e1c889c1ec547371227558e1da5f2f50c7dd5e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 21 Jan 2007 20:08:33 +0100 Subject: [ARM] 4102/1: Allow for PHYS_OFFSET on any valid 2MiB address This patchs allows the offset to the first page of physical memory to be on any 2MB boundary whereas the previous code could only handle psysical offset to any 16MB boundary (0xNN000000) or any 1MB boundary below 0x01000000 (e.g. 0x00N00000). The problem is a consequence of the orr one-byte syntax, so we fix this and we can place the first bank of memory at 0x28e00000. I have also included an explicit check that disallow compilation when PHYS_OFFSET is not on a 2MiB boundary. head.S would be the proper place to have this at since this is the first file that attempts to use PHYS_OFFSET during compile. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/kernel/head.S | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index d994561816a1..cf495a3084b3 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -22,6 +22,10 @@ #include #include +#if (PHYS_OFFSET & 0x001fffff) +#error "PHYS_OFFSET must be at an even 2MiB boundary!" +#endif + #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) @@ -251,7 +255,8 @@ __create_page_tables: * Then map first 1MB of ram in case it contains our boot params. */ add r0, r4, #PAGE_OFFSET >> 18 - orr r6, r7, #PHYS_OFFSET + orr r6, r7, #(PHYS_OFFSET & 0xff000000) + orr r6, r6, #(PHYS_OFFSET & 0x00e00000) str r6, [r0] #ifdef CONFIG_XIP_KERNEL -- cgit v1.2.3 From 48c35b2d245fffedadce62769aafea8ecf493d19 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 23 Jan 2007 21:30:14 +0300 Subject: [MIPS] There is no __GNUC_MAJOR__ Gcc major version number is in __GNUC__. As side effect fix checking with sparse if sparse was built with gcc 4.1 and mips cross-compiler is 3.4. Sparse will inherit version 4.1, __GNUC__ won't be filtered from "-dM -E -xc" output, sparse will pick only new major, effectively becoming gcc version 3.1 which is unsupported. Signed-off-by: Alexey Dobriyan Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d1b026a0337d..c68b5d3e5d18 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -623,7 +623,7 @@ LDFLAGS += -m $(ld-emul) ifdef CONFIG_MIPS CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \ - egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \ + egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/") ifdef CONFIG_64BIT CHECKFLAGS += -m64 -- cgit v1.2.3 From a0b6218037b5cf50737a7dc0fc5464ea3f8781cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 19 Jan 2007 14:35:14 +0000 Subject: [MIPS] SMTC: Fix TLB sizing bug for TLB of 64 >= entries Signed-off-by: Ralf Baechle --- arch/mips/kernel/smtc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 44238ab2fc99..c37e83b173e9 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -270,9 +270,12 @@ void smtc_configure_tlb(void) * of their initialization in smtc_cpu_setup(). */ - tlbsiz = tlbsiz & 0x3f; /* MIPS32 limits TLB indices to 64 */ - cpu_data[0].tlbsize = tlbsiz; + /* MIPS32 limits TLB indices to 64 */ + if (tlbsiz > 64) + tlbsiz = 64; + cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz; smtc_status |= SMTC_TLB_SHARED; + local_flush_tlb_all(); printk("TLB of %d entry pairs shared by %d VPEs\n", tlbsiz, vpes); -- cgit v1.2.3 From ec43c01420fc1da8bf0b19f0ceb24d7d3c7f47f3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Jan 2007 19:23:21 +0000 Subject: [MIPS] SMTC: Fix module build by exporting symbol Signed-off-by: Ralf Baechle --- arch/mips/kernel/smtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index c37e83b173e9..6a857bf030b0 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include @@ -1047,6 +1048,8 @@ void smtc_ipi_replay(void) } } +EXPORT_SYMBOL(smtc_ipi_replay); + void smtc_idle_loop_hook(void) { #ifdef SMTC_IDLE_HOOK_DEBUG -- cgit v1.2.3 From 80aac59ed5b3e5ae2132bc620ff5607929c6a304 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Wed, 24 Jan 2007 01:29:15 +0000 Subject: [MIPS] Fix reported amount of freed memory - it's in kB not bytes While at it, change message on DEC for consistency. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/dec/prom/memory.c | 2 +- arch/mips/mm/init.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 3027ce782797..3aa01d268f2d 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -122,7 +122,7 @@ unsigned long __init prom_free_prom_memory(void) addr += PAGE_SIZE; } - printk("Freeing unused PROM memory: %ldk freed\n", + printk("Freeing unused PROM memory: %ldkb freed\n", (end - PAGE_SIZE) >> 10); return end - PAGE_SIZE; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 30245c09d025..49065c133ebf 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -501,7 +501,8 @@ void free_initmem(void) freed = prom_free_prom_memory(); if (freed) - printk(KERN_INFO "Freeing firmware memory: %ldk freed\n",freed); + printk(KERN_INFO "Freeing firmware memory: %ldkb freed\n", + freed >> 10); free_init_pages("unused kernel memory", __pa_symbol(&__init_begin), -- cgit v1.2.3 From 9cfdf6f15a2a462b6b328b4c60b252cfc04ec03e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Jan 2007 19:13:08 +0000 Subject: [MIPS] VPE loader: Initialize lists before they're actually being used ... kspd which due to makefile order happens to be initialized before the vpe loader causes references to vpecontrol lists before they're actually been initialized. Signed-off-by: Ralf Baechle --- arch/mips/kernel/vpe.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 666bef484dcb..458fccf87c54 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -139,13 +139,16 @@ struct tc { struct list_head list; }; -struct vpecontrol_ { +struct { /* Virtual processing elements */ struct list_head vpe_list; /* Thread contexts */ struct list_head tc_list; -} vpecontrol; +} vpecontrol = { + .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list), + .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) +}; static void release_progmem(void *ptr); /* static __attribute_used__ void dump_vpe(struct vpe * v); */ @@ -1388,8 +1391,6 @@ static int __init vpe_module_init(void) /* dump_mtregs(); */ - INIT_LIST_HEAD(&vpecontrol.vpe_list); - INIT_LIST_HEAD(&vpecontrol.tc_list); val = read_c0_mvpconf0(); for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) { -- cgit v1.2.3 From 412489af76b5c0e4029d4406d93554c22a88fc73 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 25 Jan 2007 14:16:47 +0100 Subject: [ARM] 4112/1: Only ioremap to supersections if DOMAIN_IO is zero Supersections do not have a field for the domain and it is always 0. This patch prevents the creation of supersections during ioremap when DOMAIN_IO is not zero (i.e. !defined(CONFIG_IO_36)). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/ioremap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 251685fe73a8..0ac615c0f798 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -300,7 +300,8 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, addr = (unsigned long)area->addr; #ifndef CONFIG_SMP - if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || + if (DOMAIN_IO == 0 && + (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || cpu_is_xsc3()) && !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) { area->flags |= VM_ARM_SECTION_MAPPING; -- cgit v1.2.3 From c6428464894889e110418928e6b37dc2eb4cee56 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 24 Jan 2007 18:47:08 +0100 Subject: [ARM] 4111/1: Allow VFP to work with thread migration on SMP The current lazy saving of the VFP registers is no longer possible with thread migration on SMP. This patch implements a per-CPU vfp-state pointer and the saving of the VFP registers at every context switch. The registers restoring is still performed in a lazy way. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/entry.S | 1 + arch/arm/vfp/vfp.h | 4 ++++ arch/arm/vfp/vfphw.S | 26 ++++++++++++++++++++++++-- arch/arm/vfp/vfpmodule.c | 30 ++++++++++++++++++++++++++---- include/asm-arm/fpstate.h | 3 +++ 5 files changed, 58 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 7b595547c1c8..ca2a5ad19ea6 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -25,6 +25,7 @@ do_vfp: enable_irq ldr r4, .LCvfp + ldr r11, [r10, #TI_CPU] @ CPU number add r10, r10, #TI_VFPSTATE @ r10 = workspace ldr pc, [r4] @ call VFP entry point diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index f2797896e6d5..54a2ad6d9ca2 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -370,3 +370,7 @@ struct op { u32 (* const fn)(int dd, int dn, int dm, u32 fpscr); u32 flags; }; + +#ifdef CONFIG_SMP +extern void vfp_save_state(void *location, u32 fpexc); +#endif diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index e51e6679c402..d4b7b229631d 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -65,6 +65,7 @@ @ r2 = faulted PC+4 @ r9 = successful return @ r10 = vfp_state union +@ r11 = CPU number @ lr = failure return .globl vfp_support_entry @@ -79,7 +80,7 @@ vfp_support_entry: DBGSTR1 "enable %x", r10 ldr r3, last_VFP_context_address orr r1, r1, #FPEXC_ENABLE @ user FPEXC has the enable bit set - ldr r4, [r3] @ last_VFP_context pointer + ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer bic r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled cmp r4, r10 beq check_for_exception @ we are returning to the same @@ -91,7 +92,9 @@ vfp_support_entry: @ exceptions, so we can get at the @ rest of it +#ifndef CONFIG_SMP @ Save out the current registers to the old thread state + @ No need for SMP since this is not done lazily DBGSTR1 "save old state %p", r4 cmp r4, #0 @@ -105,10 +108,11 @@ vfp_support_entry: stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump +#endif no_old_VFP_process: DBGSTR1 "load state %p", r10 - str r10, [r3] @ update the last_VFP_context pointer + str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer @ Load the saved state back into the VFP VFPFLDMIA r10 @ reload the working registers while @ FPEXC is in a safe state @@ -162,6 +166,24 @@ process_exception: @ required. If not, the user code will @ retry the faulted instruction +#ifdef CONFIG_SMP + .globl vfp_save_state + .type vfp_save_state, %function +vfp_save_state: + @ Save the current VFP state + @ r0 - save location + @ r1 - FPEXC + DBGSTR1 "save VFP state %p", r0 + VFPFMRX r2, FPSCR @ current status + VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards) + tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? + VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading + @ nonexistant reg on rev0 + VFPFSTMIA r0 @ save the working registers + stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 + mov pc, lr +#endif + last_VFP_context_address: .word last_VFP_context diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 490d9d18a7d1..f1e5951dc721 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -28,7 +28,7 @@ void vfp_testing_entry(void); void vfp_support_entry(void); void (*vfp_vector)(void) = vfp_testing_entry; -union vfp_state *last_VFP_context; +union vfp_state *last_VFP_context[NR_CPUS]; /* * Dual-use variable. @@ -41,13 +41,35 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; union vfp_state *vfp; + __u32 cpu = thread->cpu; if (likely(cmd == THREAD_NOTIFY_SWITCH)) { + u32 fpexc = fmrx(FPEXC); + +#ifdef CONFIG_SMP + /* + * On SMP, if VFP is enabled, save the old state in + * case the thread migrates to a different CPU. The + * restoring is done lazily. + */ + if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) { + vfp_save_state(last_VFP_context[cpu], fpexc); + last_VFP_context[cpu]->hard.cpu = cpu; + } + /* + * Thread migration, just force the reloading of the + * state on the new CPU in case the VFP registers + * contain stale data. + */ + if (thread->vfpstate.hard.cpu != cpu) + last_VFP_context[cpu] = NULL; +#endif + /* * Always disable VFP so we can lazily save/restore the * old state. */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + fmxr(FPEXC, fpexc & ~FPEXC_ENABLE); return NOTIFY_DONE; } @@ -68,8 +90,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) } /* flush and release case: Per-thread VFP cleanup. */ - if (last_VFP_context == vfp) - last_VFP_context = NULL; + if (last_VFP_context[cpu] == vfp) + last_VFP_context[cpu] = NULL; return NOTIFY_DONE; } diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index 6af4e6bd1290..f31cda5a55ee 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -35,6 +35,9 @@ struct vfp_hard_struct { */ __u32 fpinst; __u32 fpinst2; +#ifdef CONFIG_SMP + __u32 cpu; +#endif }; union vfp_state { -- cgit v1.2.3 From 0cd78989a2d98a62017a5842f81b61e1b425cd0d Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 26 Jan 2007 13:12:25 +0100 Subject: [AVR32] Export clear_page symbol Add missing EXPORT_SYMBOL(clear_page), allowing ext3 to be compiled as a module. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/avr32_ksyms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 7c4c76114bba..80f55f8dbf1c 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -29,6 +29,7 @@ EXPORT_SYMBOL(__avr32_asr64); */ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(clear_page); /* * Userspace access stuff. -- cgit v1.2.3 From 4fe4f4ace5a667122f8dd04302e19e46d99e3594 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 26 Jan 2007 13:19:48 +0100 Subject: [AVR32] Update ATSTK1000 defconfig: Enable macb by default Enable the Atmel MACB ethernet driver by default on ATSTK1000. Signed-off-by: Haavard Skinnemoen --- arch/avr32/configs/atstk1002_defconfig | 39 +++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index ae92a14ef9a0..77dace9d54bc 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc2 -# Fri Oct 20 11:52:37 2006 +# Linux kernel version: 2.6.20-rc6 +# Fri Jan 26 13:12:59 2007 # CONFIG_AVR32=y CONFIG_GENERIC_HARDIRQS=y @@ -9,6 +9,8 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -36,6 +38,7 @@ CONFIG_TASK_DELAY_ACCT=y # CONFIG_UTS_NS is not set CONFIG_AUDIT=y # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -75,7 +78,9 @@ CONFIG_MODULE_UNLOAD=y # Block layer # CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -125,6 +130,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_OWNERSHIP_TRACE is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_CMDLINE="" @@ -182,6 +188,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -260,6 +267,7 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -355,7 +363,6 @@ CONFIG_BLK_DEV_INITRD=y # # Misc devices # -# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # @@ -405,11 +412,14 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y # # Ethernet (1000 Mbit) @@ -505,10 +515,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # @@ -620,6 +626,10 @@ CONFIG_UNIX98_PTYS=y # DMA Devices # +# +# Virtualization +# + # # File systems # @@ -683,7 +693,6 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -762,6 +771,11 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + # # Kernel hacking # @@ -770,6 +784,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y @@ -785,13 +801,10 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES is not set @@ -809,6 +822,7 @@ CONFIG_FORCED_INLINING=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -817,3 +831,4 @@ CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y -- cgit v1.2.3 From a1f3bb9ae4497a2ed3eac773fd7798ac33a0371f Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:46 -0800 Subject: [PATCH] Fix CONFIG_COMPAT_VDSO I wouldn't mind if CONFIG_COMPAT_VDSO went away entirely. But if it's there, it should work properly. Currently it's quite haphazard: both real vma and fixmap are mapped, both are put in the two different AT_* slots, sysenter returns to the vma address rather than the fixmap address, and core dumps yet are another story. This patch makes CONFIG_COMPAT_VDSO disable the real vma and use the fixmap area consistently. This makes it actually compatible with what the old vdso implementation did. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/entry.S | 4 ++++ arch/i386/kernel/sysenter.c | 2 ++ include/asm-i386/elf.h | 7 +++---- include/asm-i386/fixmap.h | 2 ++ include/asm-i386/page.h | 2 ++ 5 files changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 06461b8b715d..5e47683fc63a 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -302,12 +302,16 @@ sysenter_past_esp: pushl $(__USER_CS) CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET cs, 0*/ +#ifndef CONFIG_COMPAT_VDSO /* * Push current_thread_info()->sysenter_return to the stack. * A tiny bit of offset fixup is necessary - 4*4 means the 4 words * pushed above; +8 corresponds to copy_thread's esp0 setting. */ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) +#else + pushl $SYSENTER_RETURN +#endif CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET eip, 0 diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index 7de9117b5a3a..454d12df59ea 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -100,6 +100,7 @@ int __init sysenter_setup(void) return 0; } +#ifndef CONFIG_COMPAT_VDSO static struct page *syscall_nopage(struct vm_area_struct *vma, unsigned long adr, int *type) { @@ -187,3 +188,4 @@ int in_gate_area_no_task(unsigned long addr) { return 0; } +#endif diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 45d21a0c95bf..0515d61d5411 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -143,11 +143,8 @@ extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct # define VDSO_PRELINK 0 #endif -#define VDSO_COMPAT_SYM(x) \ - (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) - #define VDSO_SYM(x) \ - (VDSO_BASE + (unsigned long)(x) - VDSO_PRELINK) + (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) #define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE) #define VDSO_EHDR ((const struct elfhdr *) VDSO_COMPAT_BASE) @@ -156,10 +153,12 @@ extern void __kernel_vsyscall; #define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall) +#ifndef CONFIG_COMPAT_VDSO #define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm; extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack); +#endif extern unsigned int vdso_enabled; diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h index 02428cb36621..3e9f610c35df 100644 --- a/include/asm-i386/fixmap.h +++ b/include/asm-i386/fixmap.h @@ -23,6 +23,8 @@ extern unsigned long __FIXADDR_TOP; #else #define __FIXADDR_TOP 0xfffff000 +#define FIXADDR_USER_START __fix_to_virt(FIX_VDSO) +#define FIXADDR_USER_END __fix_to_virt(FIX_VDSO - 1) #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h index fd3f64ace248..7b19f454761d 100644 --- a/include/asm-i386/page.h +++ b/include/asm-i386/page.h @@ -143,7 +143,9 @@ extern int page_is_ram(unsigned long pagenr); #include #include +#ifndef CONFIG_COMPAT_VDSO #define __HAVE_ARCH_GATE_AREA 1 +#endif #endif /* __KERNEL__ */ #endif /* _I386_PAGE_H */ -- cgit v1.2.3 From f47aef55d9a18945fcdd7fd6bf01121ce973b91b Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:49 -0800 Subject: [PATCH] i386 vDSO: use VM_ALWAYSDUMP This patch fixes core dumps to include the vDSO vma, which is left out now. It removes the special-case core writing macros, which were not doing the right thing for the vDSO vma anyway. Instead, it uses VM_ALWAYSDUMP in the vma; there is no need for the fixmap page to be installed. It handles the CONFIG_COMPAT_VDSO case by making elf_core_dump use the fake vma from get_gate_vma after real vmas in the same way the /proc/PID/maps code does. This changes core dumps so they no longer include the non-PT_LOAD phdrs from the vDSO. I made the change to add them in the first place, but in turned out that nothing ever wanted them there since the advent of NT_AUXV. It's cleaner to leave them out, and just let the phdrs inside the vDSO image speak for themselves. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/sysenter.c | 12 +++++++----- fs/binfmt_elf.c | 38 +++++++++++++++++++++++++++++++++++--- include/asm-i386/elf.h | 44 -------------------------------------------- mm/memory.c | 7 +++++++ 4 files changed, 49 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index 454d12df59ea..5da744204d10 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -79,11 +79,6 @@ int __init sysenter_setup(void) #ifdef CONFIG_COMPAT_VDSO __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); -#else - /* - * In the non-compat case the ELF coredumping code needs the fixmap: - */ - __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_KERNEL_RO); #endif if (!boot_cpu_has(X86_FEATURE_SEP)) { @@ -147,6 +142,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack) vma->vm_end = addr + PAGE_SIZE; /* MAYWRITE to allow gdb to COW and set breakpoints */ vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; + /* + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully interpretable later + * without matching up the same kernel and hardware config to see + * what PC values meant. + */ + vma->vm_flags |= VM_ALWAYSDUMP; vma->vm_flags |= mm->def_flags; vma->vm_page_prot = protection_map[vma->vm_flags & 7]; vma->vm_ops = &syscall_vm_ops; diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 6fec8bfa6bac..90461f49e902 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1428,6 +1428,32 @@ static int elf_dump_thread_status(long signr, struct elf_thread_status *t) return sz; } +static struct vm_area_struct *first_vma(struct task_struct *tsk, + struct vm_area_struct *gate_vma) +{ + struct vm_area_struct *ret = tsk->mm->mmap; + + if (ret) + return ret; + return gate_vma; +} +/* + * Helper function for iterating across a vma list. It ensures that the caller + * will visit `gate_vma' prior to terminating the search. + */ +static struct vm_area_struct *next_vma(struct vm_area_struct *this_vma, + struct vm_area_struct *gate_vma) +{ + struct vm_area_struct *ret; + + ret = this_vma->vm_next; + if (ret) + return ret; + if (this_vma == gate_vma) + return NULL; + return gate_vma; +} + /* * Actual dumper * @@ -1443,7 +1469,7 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) int segs; size_t size = 0; int i; - struct vm_area_struct *vma; + struct vm_area_struct *vma, *gate_vma; struct elfhdr *elf = NULL; loff_t offset = 0, dataoff, foffset; unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur; @@ -1529,6 +1555,10 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) segs += ELF_CORE_EXTRA_PHDRS; #endif + gate_vma = get_gate_vma(current); + if (gate_vma != NULL) + segs++; + /* Set up header */ fill_elf_header(elf, segs + 1); /* including notes section */ @@ -1596,7 +1626,8 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE); /* Write program headers for segments dump */ - for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { + for (vma = first_vma(current, gate_vma); vma != NULL; + vma = next_vma(vma, gate_vma)) { struct elf_phdr phdr; size_t sz; @@ -1645,7 +1676,8 @@ static int elf_core_dump(long signr, struct pt_regs *regs, struct file *file) /* Align to page */ DUMP_SEEK(dataoff - foffset); - for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { + for (vma = first_vma(current, gate_vma); vma != NULL; + vma = next_vma(vma, gate_vma)) { unsigned long addr; if (!maydump(vma)) diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 0515d61d5411..369035dfe4b6 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -168,50 +168,6 @@ do if (vdso_enabled) { \ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_COMPAT_BASE); \ } while (0) -/* - * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out - * extra segments containing the vsyscall DSO contents. Dumping its - * contents makes post-mortem fully interpretable later without matching up - * the same kernel and hardware config to see what PC values meant. - * Dumping its extra ELF program headers includes all the other information - * a debugger needs to easily find how the vsyscall DSO was being used. - */ -#define ELF_CORE_EXTRA_PHDRS (VDSO_HIGH_EHDR->e_phnum) -#define ELF_CORE_WRITE_EXTRA_PHDRS \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - Elf32_Off ofs = 0; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - struct elf_phdr phdr = vsyscall_phdrs[i]; \ - if (phdr.p_type == PT_LOAD) { \ - BUG_ON(ofs != 0); \ - ofs = phdr.p_offset = offset; \ - phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ - phdr.p_filesz = phdr.p_memsz; \ - offset += phdr.p_filesz; \ - } \ - else \ - phdr.p_offset += ofs; \ - phdr.p_paddr = 0; /* match other core phdrs */ \ - DUMP_WRITE(&phdr, sizeof(phdr)); \ - } \ -} while (0) -#define ELF_CORE_WRITE_EXTRA_DATA \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - if (vsyscall_phdrs[i].p_type == PT_LOAD) \ - DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr, \ - PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \ - } \ -} while (0) - #endif #endif diff --git a/mm/memory.c b/mm/memory.c index 5beb4b894c5a..ef09f0acb1d8 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2608,6 +2608,13 @@ static int __init gate_vma_init(void) gate_vma.vm_end = FIXADDR_USER_END; gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC; gate_vma.vm_page_prot = __P101; + /* + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully interpretable later + * without matching up the same kernel and hardware config to see + * what PC values meant. + */ + gate_vma.vm_flags |= VM_ALWAYSDUMP; return 0; } __initcall(gate_vma_init); -- cgit v1.2.3 From e03f0ca11645ce69a4defcd4f60a5cb2d5e30507 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:50 -0800 Subject: [PATCH] x86_64 ia32 vDSO: use VM_ALWAYSDUMP This patch fixes ia32 core dumps on x86_64 to include just one phdr for the vDSO vma. Currently it writes a confused format with two phdrs for the address, one without contents and one with. This patch removes the special-case core writing macros for the ia32 vDSO. Instead, it uses VM_ALWAYSDUMP in the vma. This changes core dumps so they no longer include the non-PT_LOAD phdrs from the vDSO, consistent with fixed native i386 core dumps. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/ia32_binfmt.c | 49 ------------------------------------------ arch/x86_64/ia32/syscall32.c | 7 ++++++ 2 files changed, 7 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 543ef4f405e9..5ce0bd486bbf 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -64,55 +64,6 @@ typedef unsigned int elf_greg_t; #define ELF_NGREG (sizeof (struct user_regs_struct32) / sizeof(elf_greg_t)) typedef elf_greg_t elf_gregset_t[ELF_NGREG]; -/* - * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out - * extra segments containing the vsyscall DSO contents. Dumping its - * contents makes post-mortem fully interpretable later without matching up - * the same kernel and hardware config to see what PC values meant. - * Dumping its extra ELF program headers includes all the other information - * a debugger needs to easily find how the vsyscall DSO was being used. - */ -#define ELF_CORE_EXTRA_PHDRS (find_vma(current->mm, VSYSCALL32_BASE) ? \ - (VSYSCALL32_EHDR->e_phnum) : 0) -#define ELF_CORE_WRITE_EXTRA_PHDRS \ -do { \ - if (find_vma(current->mm, VSYSCALL32_BASE)) { \ - const struct elf32_phdr *const vsyscall_phdrs = \ - (const struct elf32_phdr *) (VSYSCALL32_BASE \ - + VSYSCALL32_EHDR->e_phoff);\ - int i; \ - Elf32_Off ofs = 0; \ - for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) { \ - struct elf32_phdr phdr = vsyscall_phdrs[i]; \ - if (phdr.p_type == PT_LOAD) { \ - BUG_ON(ofs != 0); \ - ofs = phdr.p_offset = offset; \ - phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ - phdr.p_filesz = phdr.p_memsz; \ - offset += phdr.p_filesz; \ - } \ - else \ - phdr.p_offset += ofs; \ - phdr.p_paddr = 0; /* match other core phdrs */ \ - DUMP_WRITE(&phdr, sizeof(phdr)); \ - } \ - } \ -} while (0) -#define ELF_CORE_WRITE_EXTRA_DATA \ -do { \ - if (find_vma(current->mm, VSYSCALL32_BASE)) { \ - const struct elf32_phdr *const vsyscall_phdrs = \ - (const struct elf32_phdr *) (VSYSCALL32_BASE \ - + VSYSCALL32_EHDR->e_phoff); \ - int i; \ - for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) { \ - if (vsyscall_phdrs[i].p_type == PT_LOAD) \ - DUMP_WRITE((void *) (u64) vsyscall_phdrs[i].p_vaddr,\ - PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \ - } \ - } \ -} while (0) - struct elf_siginfo { int si_signo; /* signal number */ diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c index 3e5ed20cba45..3ac935535e20 100644 --- a/arch/x86_64/ia32/syscall32.c +++ b/arch/x86_64/ia32/syscall32.c @@ -59,6 +59,13 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) vma->vm_end = VSYSCALL32_END; /* MAYWRITE to allow gdb to COW and set breakpoints */ vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; + /* + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully interpretable later + * without matching up the same kernel and hardware config to see + * what PC values meant. + */ + vma->vm_flags |= VM_ALWAYSDUMP; vma->vm_flags |= mm->def_flags; vma->vm_page_prot = protection_map[vma->vm_flags & 7]; vma->vm_ops = &syscall32_vm_ops; -- cgit v1.2.3 From 3a0cfadb42e0a6dd221aa49232a65d2771063285 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:51 -0800 Subject: [PATCH] powerpc vDSO: use VM_ALWAYSDUMP This patch fixes core dumps to include the vDSO vma, which is left out now. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Acked-by: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vdso.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index a4b28c73bba0..ae0ede19879d 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -284,6 +284,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, * pages though */ vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC; + /* + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully interpretable later + * without matching up the same kernel and hardware config to see + * what PC values meant. + */ + vma->vm_flags |= VM_ALWAYSDUMP; vma->vm_flags |= mm->def_flags; vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; vma->vm_ops = &vdso_vmops; -- cgit v1.2.3 From c633090e3105e779c97d4978e5e3d7d66b291cfb Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 26 Jan 2007 00:56:52 -0800 Subject: [PATCH] x86_64 ia32 vDSO: define arch_vma_name This patch makes x86_64 define arch_vma_name for CONFIG_IA32_EMULATION. This makes the ia32 vDSO mapping appear in /proc/PID/maps with "[vdso]" for ia32 processes, as it does on native i386. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/syscall32.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c index 3ac935535e20..59f1fa155915 100644 --- a/arch/x86_64/ia32/syscall32.c +++ b/arch/x86_64/ia32/syscall32.c @@ -82,6 +82,14 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack) return 0; } +const char *arch_vma_name(struct vm_area_struct *vma) +{ + if (vma->vm_start == VSYSCALL32_BASE && + vma->vm_mm && vma->vm_mm->task_size == IA32_PAGE_OFFSET) + return "[vdso]"; + return NULL; +} + static int __init init_syscall32(void) { syscall32_page = (void *)get_zeroed_page(GFP_KERNEL); -- cgit v1.2.3 From fe33f6f1525113ab0bae416966209438e7a31987 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Fri, 26 Jan 2007 00:57:12 -0800 Subject: [PATCH] Fix UML on non-standard VM split hosts This fixes UML on hosts with non-standard VM splits. We had changed the config variable that controls UML behavior on such hosts, but not propogated the change everywhere. In particular, the values of STUB_CODE and STUB_DATA relied on the old variable. I also reformatted the HOST_VMSPLIT_3G help to make it more standard. Spotted by uml@flonatel.org. Signed-off-by: Jeff Dike Cc: Blaisorblade Cc: Pravin Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig.i386 | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index f191a550a079..77558a88a2fe 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -19,22 +19,22 @@ config SEMAPHORE_SLEEPERS choice prompt "Host memory split" default HOST_VMSPLIT_3G - ---help--- - This is needed when the host kernel on which you run has a non-default - (like 2G/2G) memory split, instead of the customary 3G/1G. If you did - not recompile your own kernel but use the default distro's one, you can - safely accept the "Default split" option. + help + This is needed when the host kernel on which you run has a non-default + (like 2G/2G) memory split, instead of the customary 3G/1G. If you did + not recompile your own kernel but use the default distro's one, you can + safely accept the "Default split" option. - It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via - CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck - patchset by Con Kolivas, or other ones) - option names match closely the - host CONFIG_VM_SPLIT_* ones. + It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via + CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck + patchset by Con Kolivas, or other ones) - option names match closely the + host CONFIG_VM_SPLIT_* ones. - A lower setting (where 1G/3G is lowest and 3G/1G is higher) will - tolerate even more "normal" host kernels, but an higher setting will be - stricter. + A lower setting (where 1G/3G is lowest and 3G/1G is higher) will + tolerate even more "normal" host kernels, but an higher setting will be + stricter. - So, if you do not know what to do here, say 'Default split'. + So, if you do not know what to do here, say 'Default split'. config HOST_VMSPLIT_3G bool "Default split (3G/1G user/kernel host split)" @@ -67,13 +67,13 @@ config 3_LEVEL_PGTABLES config STUB_CODE hex - default 0xbfffe000 if !HOST_2G_2G - default 0x7fffe000 if HOST_2G_2G + default 0xbfffe000 if !HOST_VMSPLIT_2G + default 0x7fffe000 if HOST_VMSPLIT_2G config STUB_DATA hex - default 0xbffff000 if !HOST_2G_2G - default 0x7ffff000 if HOST_2G_2G + default 0xbffff000 if !HOST_VMSPLIT_2G + default 0x7ffff000 if HOST_VMSPLIT_2G config STUB_START hex -- cgit v1.2.3 From 8cdf92a98fa0f91068615443f2a8597b7f2c34ca Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Jan 2007 19:31:15 +0000 Subject: Fix Maple PATA IRQ assignment. On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse Signed-off-by: Jeff Garzik --- arch/powerpc/Kconfig | 1 + drivers/ata/Kconfig | 4 ++++ drivers/ata/libata-sff.c | 6 +++--- include/asm-generic/libata-portmap.h | 4 ++-- include/asm-powerpc/libata-portmap.h | 12 ++++++++++++ 5 files changed, 22 insertions(+), 5 deletions(-) create mode 100644 include/asm-powerpc/libata-portmap.h (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0855d55c194d..b268c417c0bf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -484,6 +484,7 @@ config PPC_MAPLE select PPC_970_NAP select PPC_NATIVE select PPC_RTAS + select ATA_NONSTANDARD if ATA default n help This option enables support for the Maple 970FX Evaluation Board. diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index da21552d2b1c..1c94b43d2c9b 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -19,6 +19,10 @@ config ATA if ATA +config ATA_NONSTANDARD + bool + default n + config SATA_AHCI tristate "AHCI SATA support" depends on PCI diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 942aeba2940a..12c88c588039 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -917,7 +917,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, probe_ent->irq_flags = IRQF_SHARED; if (port_mask & ATA_PORT_PRIMARY) { - probe_ent->irq = ATA_PRIMARY_IRQ; + probe_ent->irq = ATA_PRIMARY_IRQ(pdev); probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD; probe_ent->port[0].altstatus_addr = probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL; @@ -933,9 +933,9 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, if (port_mask & ATA_PORT_SECONDARY) { if (probe_ent->irq) - probe_ent->irq2 = ATA_SECONDARY_IRQ; + probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev); else - probe_ent->irq = ATA_SECONDARY_IRQ; + probe_ent->irq = ATA_SECONDARY_IRQ(pdev); probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD; probe_ent->port[1].altstatus_addr = probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL; diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h index 9202fd02d5be..62fb3618293d 100644 --- a/include/asm-generic/libata-portmap.h +++ b/include/asm-generic/libata-portmap.h @@ -3,10 +3,10 @@ #define ATA_PRIMARY_CMD 0x1F0 #define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ 14 +#define ATA_PRIMARY_IRQ(dev) 14 #define ATA_SECONDARY_CMD 0x170 #define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ 15 +#define ATA_SECONDARY_IRQ(dev) 15 #endif diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h new file mode 100644 index 000000000000..4d8518049f4d --- /dev/null +++ b/include/asm-powerpc/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif -- cgit v1.2.3 From 86d43258bcad2068744c85181b97bb35ab27a74d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 26 Jan 2007 18:48:16 -0800 Subject: [SPARC64]: Set g4/g5 properly in sun4v dtlb-prot handling. Mirror the logic in the sun4u handler, we have to update both registers even when we branch out to window fault fixup handling. The way it works is that if we are in etrap processing a fault already, g4/g5 holds the original fault information. If we take a window spill fault while doing etrap, then we put the window spill fault info into g4/g5 and this is what the top-level fault handler ends up processing first. Then we retry the originally faulting instruction, and process the original fault at that time. This is all necessary because of how constrained the trap registers are in these code paths. These cases trigger very rarely, so even if there is some performance implication it's doesn't happen very often. In fact the rarity is why it took so long to trigger and find this particular bug. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index b731881224e8..9871dbb1ab42 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -142,9 +142,9 @@ sun4v_dtlb_prot: rdpr %tl, %g1 cmp %g1, 1 bgu,pn %xcc, winfix_trampoline - nop - ba,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 + ba,pt %xcc, sparc64_realfault_common + nop /* Called from trap table: * %g4: vaddr -- cgit v1.2.3 From 05916eec9f4d4370ef9a6cbb699f637302f6e157 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 25 Jan 2007 18:07:14 -0800 Subject: [POWERPC] PS3: add not complete comment to kconfig Add a comment to the PS3 config option to inform users that the current implementation is not yet complete. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0855d55c194d..f4d1f31c14fa 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -525,12 +525,15 @@ config PPC_IBM_CELL_BLADE select UDBG_RTAS_CONSOLE config PPC_PS3 - bool "Sony PS3" + bool "Sony PS3 (incomplete)" depends on PPC_MULTIPLATFORM && PPC64 select PPC_CELL help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. + Support for this platform is not yet complete, so + enabling this will not result in a bootable kernel on a + PS3 system. config PPC_NATIVE bool -- cgit v1.2.3 From 545da94f924d52f80e2bbea99a8652f454889a2b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 28 Jan 2007 07:45:53 +1100 Subject: [POWERPC] Fix sys_pciconfig_iobase bus matching A stupid bug has been plaguing the sys_pciconfig_iobase on ppc64. It wasn't noticed until recently as it seems to not affect G5s but it's been causing problems running X servers on some other machines recently. The bus number matching was bogus. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 73c59ec49120..01f18c683407 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1430,7 +1430,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { bus = pci_bus_b(ln); - if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) + if (in_bus >= bus->number && in_bus <= bus->subordinate) break; bus = NULL; } -- cgit v1.2.3 From 3453c8478a228d9b374956ea99256163f1a0c88c Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 29 Jan 2007 00:07:04 -0500 Subject: [CPUFREQ] Remove unneeded errata workaround from p4-clockmod. This workaround unnecessarily cripples functionality to work around an errata that doesn't seem possible to hit due to us using the automatic clock throttling in the p4 mcheck code. See http://lkml.org/lkml/2006/10/28/148 for complete reasoning and lack of disconsent. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index bec50170b75a..4786fedca6eb 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -51,7 +51,6 @@ enum { static int has_N44_O17_errata[NR_CPUS]; -static int has_N60_errata[NR_CPUS]; static unsigned int stock_freq; static struct cpufreq_driver p4clockmod_driver; static unsigned int cpufreq_p4_get(unsigned int cpu); @@ -224,12 +223,6 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) case 0x0f12: has_N44_O17_errata[policy->cpu] = 1; dprintk("has errata -- disabling low frequencies\n"); - break; - - case 0x0f29: - has_N60_errata[policy->cpu] = 1; - dprintk("has errata -- disabling frequencies lower than 2ghz\n"); - break; } /* get max frequency */ @@ -241,8 +234,6 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { if ((i<2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else if (has_N60_errata[policy->cpu] && ((stock_freq * i)/8) < 2000000) - p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; } -- cgit v1.2.3 From b9d1902cd281d9b829fb3d6ee9148d28c8c63382 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 29 Jan 2007 00:11:29 +0100 Subject: [ARM] 4117/1: S3C2412: Fix writel() usage in selection code The S3C2412 DMA selection code has the arguments to writel() the wrong way around. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/s3c2412-dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c index fe71a8fdb87c..138f726ac6bf 100644 --- a/arch/arm/mach-s3c2410/s3c2412-dma.c +++ b/arch/arm/mach-s3c2410/s3c2412-dma.c @@ -133,8 +133,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map) { - writel(chan->regs + S3C2412_DMA_DMAREQSEL, - map->channels[0] | S3C2412_DMAREQSEL_HW); + writel(map->channels[0] | S3C2412_DMAREQSEL_HW, + chan->regs + S3C2412_DMA_DMAREQSEL); } static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { -- cgit v1.2.3 From bf2326e7525404576ab2bdf890e903ca4a249093 Mon Sep 17 00:00:00 2001 From: Jan Altenberg Date: Thu, 25 Jan 2007 16:25:56 +0100 Subject: [PATCH] Malta: Fix build if CONFIG_MTD is diabled. Signed-off-by: Jan Altenberg Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index b662c75fb28e..cb7f349b0514 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,5 +19,6 @@ # under Linux. # -obj-y := malta_int.o malta_mtd.o malta_setup.o +obj-y := malta_int.o malta_setup.o +obj-$(CONFIG_MTD) += malta_mtd.o obj-$(CONFIG_SMP) += malta_smp.o -- cgit v1.2.3 From 1ca5cb5ddd500fdf2096ebe9d4131ee9f1eabf43 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 25 Jan 2007 23:55:17 +0000 Subject: [MIPS] Ocelot G: Fix a few misspellings of CONFIG_GALILEO_GT64240_ETH Reported by Robert P. J. Day . Signed-off-by: Ralf Baechle --- arch/mips/momentum/ocelot_g/prom.c | 4 ++-- arch/mips/momentum/ocelot_g/setup.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c index 6509a9c9863c..2f75c6b91ec5 100644 --- a/arch/mips/momentum/ocelot_g/prom.c +++ b/arch/mips/momentum/ocelot_g/prom.c @@ -28,7 +28,7 @@ struct callvectors* debug_vectors; extern unsigned long marvell_base; extern unsigned long bus_clock; -#ifdef CONFIG_GALILLEO_GT64240_ETH +#ifdef CONFIG_GALILEO_GT64240_ETH extern unsigned char prom_mac_addr_base[6]; #endif @@ -61,7 +61,7 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_G; -#ifdef CONFIG_GALILLEO_GT64240_ETH +#ifdef CONFIG_GALILEO_GT64240_ETH /* get the base MAC address for on-board ethernet ports */ memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); #endif diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c index d288f7b01842..9db638a7982c 100644 --- a/arch/mips/momentum/ocelot_g/setup.c +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -64,7 +64,7 @@ #include "ocelot_pld.h" -#ifdef CONFIG_GALILLEO_GT64240_ETH +#ifdef CONFIG_GALILEO_GT64240_ETH extern unsigned char prom_mac_addr_base[6]; #endif @@ -185,7 +185,7 @@ void __init plat_mem_setup(void) /* do handoff reconfiguration */ PMON_v2_setup(); -#ifdef CONFIG_GALILLEO_GT64240_ETH +#ifdef CONFIG_GALILEO_GT64240_ETH /* get the mac addr */ memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); #endif -- cgit v1.2.3 From 9616d54fffa4c9ae78136cc6d01209de2d92b75d Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 25 Jan 2007 18:41:35 -0500 Subject: [MIPS] Fix typo of "CONFIG_MT_SMP". Signed-off-by: Robert P. J. Day Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/sim/sim_setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c index 2659c1c3b78d..ea2066c3a1f7 100644 --- a/arch/mips/mips-boards/sim/sim_setup.c +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -57,7 +57,7 @@ void __init plat_mem_setup(void) board_time_init = sim_time_init; prom_printf("Linux started...\n"); -#ifdef CONFIG_MT_SMP +#ifdef CONFIG_MIPS_MT_SMP sanitize_tlb_entries(); #endif } -- cgit v1.2.3 From 8339f0008c47cdd921c73f6d53d5588b5484f93c Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 29 Jan 2007 13:19:05 -0700 Subject: [PATCH] i386: In assign_irq_vector look at all vectors before giving up When the world was a simple and static place setting up irqs was easy. It sufficed to allocate a linux irq number and a find a free cpu vector we could receive that linux irq on. In those days it was a safe assumption that any allocated vector was actually in use so after one global pass through all of the vectors we would have none left. These days things are much more dynamic with interrupt controllers (in the form of MSI or MSI-X) appearing on plug in cards and linux irqs appearing and disappearing. As these irqs come and go vectors are allocated and freed, invalidating the ancient assumption that all allocated vectors stayed in use forever. So this patch modifies the vector allocator to walk through every possible vector before giving up, and to check to see if a vector is in use before assigning it. With these changes we stop leaking freed vectors and it becomes possible to allocate and free irq vectors all day long. This changed was modeled after the vector allocator on x86_64 where this limitation has already been removed. In essence we don't update the static variables that hold the position of the last vector we allocated until have successfully allocated another vector. This allows us to detect if we have completed one complete scan through all of the possible vectors. Acked-by: Auke Kok Signed-off-by: Eric W. Biederman Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 2424cc9c7b3d..6a3875f81a0a 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1227,26 +1227,32 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; - int vector; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + int vector, offset, i; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); if (irq_vector[irq] > 0) return irq_vector[irq]; - current_vector += 8; - if (current_vector == SYSCALL_VECTOR) - current_vector += 8; - - if (current_vector >= FIRST_SYSTEM_VECTOR) { - offset++; - if (!(offset % 8)) - return -ENOSPC; - current_vector = FIRST_DEVICE_VECTOR + offset; - } - vector = current_vector; + offset = current_offset; +next: + vector += 8; + if (vector >= FIRST_SYSTEM_VECTOR) { + offset = (offset + 1) % 8; + vector = FIRST_DEVICE_VECTOR + offset; + } + if (vector == current_vector) + return -ENOSPC; + if (vector == SYSCALL_VECTOR) + goto next; + for (i = 0; i < NR_IRQ_VECTORS; i++) + if (irq_vector[i] == vector) + goto next; + + current_vector = vector; + current_offset = offset; irq_vector[irq] = vector; return vector; -- cgit v1.2.3 From 89eb1693f975eddafd475782ee857d98f411d10d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 30 Jan 2007 13:23:25 +0000 Subject: [PATCH] missing exports of pm_power_off() on alpha and sparc32 Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/process.c | 1 + arch/sparc/kernel/process.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 3370e6faeae0..c15186390693 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -47,6 +47,7 @@ * Power off function, if any */ void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL(pm_power_off); void cpu_idle(void) diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 89a28cc018c9..113bd48a89bd 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -54,6 +54,7 @@ void (*pm_idle)(void); * handler when auxio is not present-- unused for now... */ void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL(pm_power_off); /* * sysctl - toggle power-off restriction for serial console -- cgit v1.2.3 From b20c8453a7d6e8d63c0f05ba3e38d9428c8091b1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 30 Jan 2007 13:23:40 +0000 Subject: [PATCH] fix indentation-related breakage in Kconfig.i386 Kconfig recognizes the end of help text by receding indentation depth. Recent patch had broken HOST_VMSPLIT_... choice in arch/um/Kconfig.i386 - all alternatives are interpreted as part of help text now. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/um/Kconfig.i386 | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index 77558a88a2fe..d6cffb27fff8 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -36,14 +36,14 @@ choice So, if you do not know what to do here, say 'Default split'. - config HOST_VMSPLIT_3G - bool "Default split (3G/1G user/kernel host split)" - config HOST_VMSPLIT_3G_OPT - bool "3G/1G user/kernel host split (for full 1G low memory)" - config HOST_VMSPLIT_2G - bool "2G/2G user/kernel host split" - config HOST_VMSPLIT_1G - bool "1G/3G user/kernel host split" +config HOST_VMSPLIT_3G + bool "Default split (3G/1G user/kernel host split)" +config HOST_VMSPLIT_3G_OPT + bool "3G/1G user/kernel host split (for full 1G low memory)" +config HOST_VMSPLIT_2G + bool "2G/2G user/kernel host split" +config HOST_VMSPLIT_1G + bool "1G/3G user/kernel host split" endchoice config TOP_ADDR -- cgit v1.2.3 From 3896625d0badd53dbc34d584861a36ba7eb4613f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Tue, 30 Jan 2007 14:36:17 -0800 Subject: [PATCH] uml: fix signal frame alignment Use the same signal frame alignment calculations as the underlying architecture. x86_64 appeared to do this, but the "- 8" was really subtracting 8 * sizeof(struct rt_sigframe) rather than 8 bytes. UML/i386 might have been OK, but I changed the calculation to match i386 just to be sure. Signed-off-by: Jeff Dike Cc: Cc: Adrian Bunk Cc: Paolo 'Blaisorblade' Giarrusso Acked-by: Antoine Martin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/sys-i386/signal.c | 3 ++- arch/um/sys-x86_64/signal.c | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 0709fc6670c2..3f6acd667717 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -219,7 +219,8 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, unsigned long save_sp = PT_REGS_SP(regs); int err = 0; - stack_top &= -8UL; + /* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */ + stack_top = ((stack_top + 4) & -16UL) - 4; frame = (struct sigframe __user *) stack_top - 1; if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return 1; diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index 9edf114faf79..af2f017617b4 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -191,8 +191,9 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, struct task_struct *me = current; frame = (struct rt_sigframe __user *) - round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8; - frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128); + round_down(stack_top - sizeof(struct rt_sigframe), 16); + /* Subtract 128 for a red zone and 8 for proper alignment */ + frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8); if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) goto out; -- cgit v1.2.3 From aaba6d4bf6f2a52a0c30ad1da4374ba24bd7163b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:52:28 +0000 Subject: [PATCH] mca_nmi_hook() can be called at any point ... and having it __init is a bad idea. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/i386/mach-default/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c index c511705c386c..cc2f519b2f7f 100644 --- a/arch/i386/mach-default/setup.c +++ b/arch/i386/mach-default/setup.c @@ -102,7 +102,7 @@ void __init time_init_hook(void) * along the MCA bus. Use this to hook into that chain if you will need * it. **/ -void __init mca_nmi_hook(void) +void mca_nmi_hook(void) { /* If I recall correctly, there's a whole bunch of other things that * we can do to check for NMI problems, but that's all I know about -- cgit v1.2.3 From 2a3d4f1f1f839e354ebd7d40b2d5d8ac8481a930 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:52:23 +0000 Subject: [PATCH] __crc_... is intended to be absolute i386 boot/compressed/relocs checks for absolute symbols and warns about unexpected ones. If you build with modversions, you get ~2500 warnings about __crc_. These suckers are really absolute symbols - we do _not_ want to modify them on relocation. They are generated by genksyms - EXPORT_... generates a weak alias, then genksyms produces an ld script with __crc_ = and it's fed to ld to produce the final object file. Their only use is to match kernel and module at modprobe time; they _must_ be absolute. boot/compressed/relocs has a whitelist of known absolute symbols, but it doesn't know about __crc_... stuff. As the result, we get shitloads of false positives on any ld(1) version. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/i386/boot/compressed/relocs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/boot/compressed/relocs.c b/arch/i386/boot/compressed/relocs.c index 468da89153c4..881951ca03e1 100644 --- a/arch/i386/boot/compressed/relocs.c +++ b/arch/i386/boot/compressed/relocs.c @@ -43,6 +43,8 @@ static int is_safe_abs_reloc(const char* sym_name) /* Match found */ return 1; } + if (strncmp(sym_name, "__crc_", 6) == 0) + return 1; return 0; } -- cgit v1.2.3 From b4cff8464b12b71fd6573c9b9dd762d2d390ef6c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 1 Feb 2007 13:52:33 +0000 Subject: [PATCH] sanitize sections for sparc32 smp a) sun4d_boot_one_cpu() should be __cpuinit (called only from __cpuinit __cpu_up(), for one thing, leads to calls of __cpuinit functions for another). b) got externs in arch/sparc/kernel/smp.c to match reality. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/kernel/smp.c | 8 ++++---- arch/sparc/kernel/sun4d_smp.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index 276f22881d0f..6b5f26b0fb75 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -292,8 +292,8 @@ int setup_profiling_timer(unsigned int multiplier) void __init smp_prepare_cpus(unsigned int max_cpus) { - extern void smp4m_boot_cpus(void); - extern void smp4d_boot_cpus(void); + extern void __init smp4m_boot_cpus(void); + extern void __init smp4d_boot_cpus(void); int i, cpuid, extra; printk("Entering SMP Mode...\n"); @@ -375,8 +375,8 @@ void __init smp_prepare_boot_cpu(void) int __cpuinit __cpu_up(unsigned int cpu) { - extern int smp4m_boot_one_cpu(int); - extern int smp4d_boot_one_cpu(int); + extern int __cpuinit smp4m_boot_one_cpu(int); + extern int __cpuinit smp4d_boot_one_cpu(int); int ret=0; switch(sparc_cpu_model) { diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index c80ea61e8ba0..c69de5d4863d 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -164,7 +164,7 @@ void __init smp4d_boot_cpus(void) local_flush_cache_all(); } -int smp4d_boot_one_cpu(int i) +int __cpuinit smp4d_boot_one_cpu(int i) { extern unsigned long sun4d_cpu_startup; unsigned long *entry = &sun4d_cpu_startup; -- cgit v1.2.3 From 435f8a605d3b56bb96212f4d70b62ecbd0629340 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 2 Feb 2007 08:07:42 -0800 Subject: Revert "[PATCH] fix typo in geode_configre()@cyrix.c" This reverts commit e4f0ae0ea63caceff37a13f281a72652b7ea71ba. It's not wrong, but it's not right either, and everybody seems to agree that the right fix is probably to do the ccr3 write after the ccr4 one (and that we also should clean it up a bit). And after that we need to really validate that all the bits that we write to ccr4 actually do work. The old 2.6.19 code was insane, and basically didn't change ccr4 at all (even though it certainly looks like it was the *intent* to do so). So let's revert the change that may fix things, just because it's not what was actually ever tested when the code was written, even if it _was_ the intent. There's a discussion on http://lkml.org/lkml/2007/1/9/63 that was started by the patch that now gets reverted, and that discussion may well contain the proper long-term fix. Suggested-by: Adrian Bunk Acked-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/cyrix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index abcff92f994c..c0c3b59de32c 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -173,7 +173,7 @@ static void __cpuinit geode_configure(void) ccr4 = getCx86(CX86_CCR4); ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */ - setCx86(CX86_CCR4, ccr4); + setCx86(CX86_CCR3, ccr3); set_cx86_memwb(); set_cx86_reorder(); -- cgit v1.2.3 From 29a002776ba5ef170446910b1f93c480cdd43706 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 3 Feb 2007 01:13:48 -0800 Subject: [PATCH] kexec: Avoid migration of already disabled irqs (ia64) This patch fixes up ia64 kexec support for HP rx2620 hardware. It does this by skipping migration of already disabled irqs. This is most likely a problem on other ia64 platforms as well, but I've only been able to reproduce it on one machine so far. The full story is that handle_bad_irq() gets invoked before starting the new kernel without this patch. This seems to happen when fixup_irqs() calls generic_handle_irq() on already migrated (and disabled) irqs. So by avoiding migration of disabled irqs we stay away of handle_bad_irq(). The code has been tested on three different ia64 machines, all with good results. It is possible to trigger the same bug by offlining a processor using echo 0 > /sys/devices/system/cpu/cpuX/online. More detailed information is available in the following mail thread: http://lists.osdl.org/pipermail/fastboot/2007-January/thread.html#5774 Signed-off-by: Magnus Damm Acked-by: Simon Horman Acked-by: Zou, Nanhai Acked-by: Jay Lan Acked-by: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/irq.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 54d55e4d64f7..ce49c85c928f 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -122,6 +122,9 @@ static void migrate_irqs(void) for (irq=0; irq < NR_IRQS; irq++) { desc = irq_desc + irq; + if (desc->status == IRQ_DISABLED) + continue; + /* * No handling for now. * TBD: Implement a disable function so we can now -- cgit v1.2.3 From 72253943f7281fc5c6249d9cafd63e7de3266fe9 Mon Sep 17 00:00:00 2001 From: John Keller Date: Sat, 3 Feb 2007 01:14:02 -0800 Subject: [PATCH] Altix: more ACPI PRT support The SN Altix platform does not conform to the IOSAPIC IRQ routing model. Add code in acpi_unregister_gsi() to check if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) and return. Due to an oversight, this code was not added previously when similar code was added to acpi_register_gsi(). http://marc.theaimsgroup.com/?l=linux-acpi&m=116680983430121&w=2 Signed-off-by: John Keller Acked-by: Len Brown Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/acpi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index ef2fe474f107..29f05d4b68cd 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -609,6 +609,9 @@ EXPORT_SYMBOL(acpi_register_gsi); void acpi_unregister_gsi(u32 gsi) { + if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) + return; + iosapic_unregister_intr(gsi); } -- cgit v1.2.3 From 40c373cc3af9720d1cec0e32c3da26b1d220a95b Mon Sep 17 00:00:00 2001 From: Frédéric Riss Date: Tue, 30 Jan 2007 21:41:17 +0100 Subject: [PATCH] EFI x86: pass firmware call parameters on the stack When calling into the EFI firmware, the parameters need to be passed on the stack. The recent change to use -mregparm=3 breaks x86 EFI support. This patch is needed to allow the new Intel-based Macs to suspend to ram (efi.get_time is called during the suspend phase). Signed-off-by: Frederic Riss Signed-off-by: Linus Torvalds --- arch/i386/kernel/efi.c | 89 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 73 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index b92c7f0a358a..8f9c624ace6f 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -472,6 +472,70 @@ static inline void __init check_range_for_systab(efi_memory_desc_t *md) } } +/* + * Wrap all the virtual calls in a way that forces the parameters on the stack. + */ + +#define efi_call_virt(f, args...) \ + ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args) + +static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) +{ + return efi_call_virt(get_time, tm, tc); +} + +static efi_status_t virt_efi_set_time (efi_time_t *tm) +{ + return efi_call_virt(set_time, tm); +} + +static efi_status_t virt_efi_get_wakeup_time (efi_bool_t *enabled, + efi_bool_t *pending, + efi_time_t *tm) +{ + return efi_call_virt(get_wakeup_time, enabled, pending, tm); +} + +static efi_status_t virt_efi_set_wakeup_time (efi_bool_t enabled, + efi_time_t *tm) +{ + return efi_call_virt(set_wakeup_time, enabled, tm); +} + +static efi_status_t virt_efi_get_variable (efi_char16_t *name, + efi_guid_t *vendor, u32 *attr, + unsigned long *data_size, void *data) +{ + return efi_call_virt(get_variable, name, vendor, attr, data_size, data); +} + +static efi_status_t virt_efi_get_next_variable (unsigned long *name_size, + efi_char16_t *name, + efi_guid_t *vendor) +{ + return efi_call_virt(get_next_variable, name_size, name, vendor); +} + +static efi_status_t virt_efi_set_variable (efi_char16_t *name, + efi_guid_t *vendor, + unsigned long attr, + unsigned long data_size, void *data) +{ + return efi_call_virt(set_variable, name, vendor, attr, data_size, data); +} + +static efi_status_t virt_efi_get_next_high_mono_count (u32 *count) +{ + return efi_call_virt(get_next_high_mono_count, count); +} + +static void virt_efi_reset_system (int reset_type, efi_status_t status, + unsigned long data_size, + efi_char16_t *data) +{ + efi_call_virt(reset_system, reset_type, status, data_size, data); +} + /* * This function will switch the EFI runtime services to virtual mode. * Essentially, look through the EFI memmap and map every region that @@ -525,22 +589,15 @@ void __init efi_enter_virtual_mode(void) * pointers in the runtime service table to the new virtual addresses. */ - efi.get_time = (efi_get_time_t *) efi.systab->runtime->get_time; - efi.set_time = (efi_set_time_t *) efi.systab->runtime->set_time; - efi.get_wakeup_time = (efi_get_wakeup_time_t *) - efi.systab->runtime->get_wakeup_time; - efi.set_wakeup_time = (efi_set_wakeup_time_t *) - efi.systab->runtime->set_wakeup_time; - efi.get_variable = (efi_get_variable_t *) - efi.systab->runtime->get_variable; - efi.get_next_variable = (efi_get_next_variable_t *) - efi.systab->runtime->get_next_variable; - efi.set_variable = (efi_set_variable_t *) - efi.systab->runtime->set_variable; - efi.get_next_high_mono_count = (efi_get_next_high_mono_count_t *) - efi.systab->runtime->get_next_high_mono_count; - efi.reset_system = (efi_reset_system_t *) - efi.systab->runtime->reset_system; + efi.get_time = virt_efi_get_time; + efi.set_time = virt_efi_set_time; + efi.get_wakeup_time = virt_efi_get_wakeup_time; + efi.set_wakeup_time = virt_efi_set_wakeup_time; + efi.get_variable = virt_efi_get_variable; + efi.get_next_variable = virt_efi_get_next_variable; + efi.set_variable = virt_efi_set_variable; + efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count; + efi.reset_system = virt_efi_reset_system; } void __init -- cgit v1.2.3 From 8209003547c4b1006943eac8dc6c1fb6493cafda Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 6 Feb 2007 22:55:19 -0600 Subject: [POWERPC] Added kprobes support to ppc32 Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala --- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/kprobes.c | 8 ++++++-- arch/powerpc/lib/Makefile | 2 +- include/asm-powerpc/kprobes.h | 7 ++++++- include/asm-powerpc/sstep.h | 1 + 5 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index aeb53096acf7..0b6325a77c75 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -1206,7 +1206,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES + depends on !BOOKE && !4xx && KALLSYMS && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 4657563f8813..dd2886f97e98 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -46,8 +46,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if ((unsigned long)p->addr & 0x03) { printk("Attempt to register kprobe at an unaligned address\n"); ret = -EINVAL; - } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { - printk("Cannot register a kprobe on rfid or mtmsrd\n"); + } else if (IS_MTMSRD(insn) || IS_RFID(insn) || IS_RFI(insn)) { + printk("Cannot register a kprobe on rfi/rfid or mtmsr[d]\n"); ret = -EINVAL; } @@ -483,8 +483,12 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ +#ifdef CONFIG_PPC64 regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); +#else + regs->nip = (unsigned long)jp->entry; +#endif return 1; } diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e2d414160c83..4b1ba49fbd9e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -16,11 +16,11 @@ obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ strcase.o obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o +obj-$(CONFIG_KPROBES) += sstep.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o -obj-$(CONFIG_DEBUG_KERNEL) += sstep.o endif # Temporary hack until we have migrated to asm-powerpc diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h index 2dafa376a63f..3a5dd492588f 100644 --- a/include/asm-powerpc/kprobes.h +++ b/include/asm-powerpc/kprobes.h @@ -44,6 +44,7 @@ typedef unsigned int kprobe_opcode_t; #define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) #define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) +#ifdef CONFIG_PPC64 /* * 64bit powerpc uses function descriptors. * Handle cases where: @@ -67,9 +68,13 @@ typedef unsigned int kprobe_opcode_t; } #define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry) - #define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ IS_TWI(instr) || IS_TDI(instr)) +#else +/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ +#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)(pentry) +#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) +#endif #define ARCH_SUPPORTS_KRETPROBES #define ARCH_INACTIVE_KPROBE_COUNT 1 diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h index 630a9889c07c..f593b0f9b627 100644 --- a/include/asm-powerpc/sstep.h +++ b/include/asm-powerpc/sstep.h @@ -21,6 +21,7 @@ struct pt_regs; */ #define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) #define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) +#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) /* Emulate instructions that cause a transfer of control. */ extern int emulate_step(struct pt_regs *regs, unsigned int instr); -- cgit v1.2.3 From 04903a30a327513b97c1271fc6bc4dad6502d1b8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Feb 2007 01:13:32 -0600 Subject: [POWERPC] Enable interrupts if we are doing fp math emulation Anytime we are emulating an instruction we are going to be doing some form of get_user() to get the instruction image to decode. Since get_user() might sleep we need to ensure we have interrupts enabled or we might see something like: Debug: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:697 in_atomic():0, irqs_disabled():1 Call Trace: [D6023EB0] [C0007F84] show_stack+0x58/0x174 (unreliable) [D6023EE0] [C0022C34] __might_sleep+0xbc/0xd0 [D6023EF0] [C000D158] program_check_exception+0x1d8/0x4fc [D6023F40] [C000E744] ret_from_except_full+0x0/0x4c --- Exception: 700 at 0x102a7100 LR = 0xdb9ef04 However, we want to ensure that interrupts are disabled when handling a trap exception that might be used for a kernel breakpoint. This is why ProgramCheck is marked as EXC_XFER_STD instead of EXC_XFER_EE. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/traps.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 6915b91868b8..f038caa3c2b9 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -739,20 +739,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) extern int do_mathemu(struct pt_regs *regs); /* We can now get here via a FP Unavailable exception if the core - * has no FPU, in that case no reason flags will be set */ -#ifdef CONFIG_MATH_EMULATION - /* (reason & REASON_ILLEGAL) would be the obvious thing here, - * but there seems to be a hardware bug on the 405GP (RevD) - * that means ESR is sometimes set incorrectly - either to - * ESR_DST (!?) or 0. In the process of chasing this with the - * hardware people - not sure if it can happen on any illegal - * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ - if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) { - emulate_single_step(regs); - return; - } -#endif /* CONFIG_MATH_EMULATION */ + * has no FPU, in that case the reason flags will be 0 */ if (reason & REASON_FP) { /* IEEE FP exception */ @@ -778,6 +765,20 @@ void __kprobes program_check_exception(struct pt_regs *regs) local_irq_enable(); +#ifdef CONFIG_MATH_EMULATION + /* (reason & REASON_ILLEGAL) would be the obvious thing here, + * but there seems to be a hardware bug on the 405GP (RevD) + * that means ESR is sometimes set incorrectly - either to + * ESR_DST (!?) or 0. In the process of chasing this with the + * hardware people - not sure if it can happen on any illegal + * instruction or only on FP instructions, whether there is a + * pattern to occurences etc. -dgibson 31/Mar/2003 */ + if (do_mathemu(regs) == 0) { + emulate_single_step(regs); + return; + } +#endif /* CONFIG_MATH_EMULATION */ + /* Try to emulate it if we should. */ if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) { switch (emulate_instruction(regs)) { -- cgit v1.2.3 From 5fad293bcbd48d9a2370020cf60e4b4a42559b12 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Feb 2007 01:47:59 -0600 Subject: [POWERPC] Fixup error handling when emulating a floating point instruction When we do full FP emulation its possible that we need to post a SIGFPE based on the results of the emulation. The previous code ignored this case completely. Additionally, the Soft_emulate_8xx case had two issues. One, we should never generate a SIGFPE since the code only does data movement. Second, we were interpreting the return codes incorrectly, it returns 0 on success, 1 on illop and -EFAULT on a data access error. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/traps.c | 82 +++++++++++++++++++++++++++++++++------------ 1 file changed, 60 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f038caa3c2b9..dcc6f159fd94 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -535,34 +535,40 @@ static void emulate_single_step(struct pt_regs *regs) } } -static void parse_fpe(struct pt_regs *regs) +static inline int __parse_fpscr(unsigned long fpscr) { - int code = 0; - unsigned long fpscr; - - flush_fp_to_thread(current); - - fpscr = current->thread.fpscr.val; + int ret = 0; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) - code = FPE_FLTINV; + ret = FPE_FLTINV; /* Overflow */ else if ((fpscr & FPSCR_OE) && (fpscr & FPSCR_OX)) - code = FPE_FLTOVF; + ret = FPE_FLTOVF; /* Underflow */ else if ((fpscr & FPSCR_UE) && (fpscr & FPSCR_UX)) - code = FPE_FLTUND; + ret = FPE_FLTUND; /* Divide by zero */ else if ((fpscr & FPSCR_ZE) && (fpscr & FPSCR_ZX)) - code = FPE_FLTDIV; + ret = FPE_FLTDIV; /* Inexact result */ else if ((fpscr & FPSCR_XE) && (fpscr & FPSCR_XX)) - code = FPE_FLTRES; + ret = FPE_FLTRES; + + return ret; +} + +static void parse_fpe(struct pt_regs *regs) +{ + int code = 0; + + flush_fp_to_thread(current); + + code = __parse_fpscr(current->thread.fpscr.val); _exception(SIGFPE, regs, code, regs->nip); } @@ -773,10 +779,21 @@ void __kprobes program_check_exception(struct pt_regs *regs) * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a * pattern to occurences etc. -dgibson 31/Mar/2003 */ - if (do_mathemu(regs) == 0) { + switch (do_mathemu(regs)) { + case 0: emulate_single_step(regs); return; + case 1: { + int code = 0; + code = __parse_fpscr(current->thread.fpscr.val); + _exception(SIGFPE, regs, code, regs->nip); + return; + } + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; } + /* fall through on any other errors */ #endif /* CONFIG_MATH_EMULATION */ /* Try to emulate it if we should. */ @@ -892,18 +909,39 @@ void SoftwareEmulation(struct pt_regs *regs) #ifdef CONFIG_MATH_EMULATION errcode = do_mathemu(regs); + + switch (errcode) { + case 0: + emulate_single_step(regs); + return; + case 1: { + int code = 0; + code = __parse_fpscr(current->thread.fpscr.val); + _exception(SIGFPE, regs, code, regs->nip); + return; + } + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; + default: + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + } + #else errcode = Soft_emulate_8xx(regs); -#endif - if (errcode) { - if (errcode > 0) - _exception(SIGFPE, regs, 0, 0); - else if (errcode == -EFAULT) - _exception(SIGSEGV, regs, 0, 0); - else - _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); - } else + switch (errcode) { + case 0: emulate_single_step(regs); + return; + case 1: + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + case -EFAULT: + _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip); + return; + } +#endif } #endif /* CONFIG_8xx */ -- cgit v1.2.3