From ca244a83ecc7f0a9242ee2116e622cb6d7ec2a90 Mon Sep 17 00:00:00 2001 From: Marcin Niestroj Date: Fri, 9 Dec 2016 12:33:27 +0100 Subject: ARM: dts: am335x-chilisom: Wakeup from RTC-only state by power on event On chiliSOM TPS65217 nWAKEUP pin is connected to AM335x internal RTC EXT_WAKEUP input. In RTC-only state TPS65217 is notifying about power on events (such as power buton presses) by setting nWAKEUP output low. After that it waits 5s for proper device boot. Currently it doesn't happen, as the processor doesn't listen for such events. Consequently TPS65217 changes state from SLEEP (RTC-only state) to OFF. Enable EXT_WAKEUP input of AM335x's RTC, so the processor can properly detect power on events and recover immediately from RTC-only states, without powering off RTC and losing time. Signed-off-by: Marcin Niestroj Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-chilisom.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index f9ee5859c154..1b43ebd08b38 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -124,6 +124,14 @@ &rtc { system-power-controller; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + }; }; /* NAND Flash */ -- cgit v1.2.3