From 650e3f0d66ade2a614d854765dae3bbc9a87f58d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 8 Nov 2011 10:33:03 -0800 Subject: ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/Kconfig.debug | 21 ++++++++++++++++ arch/arm/mach-msm/Kconfig | 32 ------------------------- arch/arm/mach-msm/include/mach/debug-macro.S | 19 +++------------ arch/arm/mach-msm/include/mach/msm_iomap-7x00.h | 12 ---------- arch/arm/mach-msm/include/mach/msm_iomap-7x30.h | 12 ---------- arch/arm/mach-msm/include/mach/msm_iomap-8x50.h | 12 ---------- arch/arm/mach-msm/include/mach/msm_iomap.h | 12 ++++++++++ arch/arm/mach-msm/io.c | 9 ++++--- 8 files changed, 42 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c5213e78606b..333b6a416d2f 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -247,6 +247,27 @@ choice their output to the standard serial port on the RealView PB1176 platform. + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on MSM devices. + + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on MSM devices. + + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. + endchoice config EARLY_PRINTK diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index ebde97f5d5f0..5b07b6104e5d 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -13,7 +13,6 @@ config ARCH_MSM7X00A select CPU_V6 select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM7X30 bool "MSM7x30" @@ -25,7 +24,6 @@ config ARCH_MSM7X30 select MSM_GPIOMUX select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_QSD8X50 bool "QSD8X50" @@ -37,7 +35,6 @@ config ARCH_QSD8X50 select MSM_GPIOMUX select GPIO_MSM_V1 select MSM_PROC_COMM - select HAS_MSM_DEBUG_UART_PHYS config ARCH_MSM8X60 bool "MSM8X60" @@ -73,9 +70,6 @@ config ARCH_MSM_ARM11 config ARCH_MSM_SCORPION bool -config HAS_MSM_DEBUG_UART_PHYS - bool - config MSM_VIC bool @@ -152,32 +146,6 @@ config MACH_MSM8960_RUMI3 endmenu -config MSM_DEBUG_UART - int - default 1 if MSM_DEBUG_UART1 - default 2 if MSM_DEBUG_UART2 - default 3 if MSM_DEBUG_UART3 - -if HAS_MSM_DEBUG_UART_PHYS -choice - prompt "Debug UART" - - default MSM_DEBUG_UART_NONE - - config MSM_DEBUG_UART_NONE - bool "None" - - config MSM_DEBUG_UART1 - bool "UART1" - - config MSM_DEBUG_UART2 - bool "UART2" - - config MSM_DEBUG_UART3 - bool "UART3" -endchoice -endif - config MSM_SMD_PKG3 bool diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 2dc73ccddb11..db1f22830d64 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -1,4 +1,4 @@ -/* arch/arm/mach-msm7200/include/mach/debug-macro.S +/* * * Copyright (C) 2007 Google, Inc. * Author: Brian Swetland @@ -14,15 +14,14 @@ * */ - - #include #include -#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE) .macro addruart, rp, rv, tmp +#ifdef MSM_DEBUG_UART_PHYS ldr \rp, =MSM_DEBUG_UART_PHYS ldr \rv, =MSM_DEBUG_UART_BASE +#endif .endm .macro senduart,rd,rx @@ -36,18 +35,6 @@ tst \rd, #0x04 beq 1001b .endm -#else - .macro addruart, rp, rv, tmp - mov \rv, #0xff000000 - orr \rv, \rv, #0x00f00000 - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm -#endif .macro busyuart,rd,rx .endm diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 94fe9fe6feb3..8af46123dab6 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -78,18 +78,6 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_SDC1_PHYS 0xA0400000 #define MSM_SDC1_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 37694442d1bd..198202c267c8 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -89,18 +89,6 @@ #define MSM_UART3_PHYS 0xACC00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_MDC_BASE IOMEM(0xE0200000) #define MSM_MDC_PHYS 0xAA500000 #define MSM_MDC_SIZE SZ_1M diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index d67cd73316f4..0faa894729b7 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -83,18 +83,6 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K -#ifdef CONFIG_MSM_DEBUG_UART -#define MSM_DEBUG_UART_BASE 0xE1000000 -#if CONFIG_MSM_DEBUG_UART == 1 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif CONFIG_MSM_DEBUG_UART == 2 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif CONFIG_MSM_DEBUG_UART == 3 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif -#define MSM_DEBUG_UART_SIZE SZ_4K -#endif - #define MSM_MDC_BASE IOMEM(0xE0200000) #define MSM_MDC_PHYS 0xAA500000 #define MSM_MDC_SIZE SZ_1M diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 4ded15238b60..90682f4599d3 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -55,6 +55,18 @@ #include "msm_iomap-8960.h" +#define MSM_DEBUG_UART_SIZE SZ_4K +#if defined(CONFIG_DEBUG_MSM_UART1) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART2) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif defined(CONFIG_DEBUG_MSM_UART3) +#define MSM_DEBUG_UART_BASE 0xE1000000 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif + /* Virtual addresses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) #define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 8759ecf7454f..03036afe6266 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_CHIP_DEVICE(GPIO1, MSM7X00), MSM_CHIP_DEVICE(GPIO2, MSM7X00), MSM_DEVICE(CLK_CTL), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif #ifdef CONFIG_ARCH_MSM7X30 @@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(SCPLL), MSM_DEVICE(AD5), MSM_DEVICE(MDC), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif { @@ -146,7 +148,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(SAW), MSM_DEVICE(GCC), MSM_DEVICE(TCSR), -#ifdef CONFIG_MSM_DEBUG_UART +#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ + defined(CONFIG_DEBUG_MSM_UART3) MSM_DEVICE(DEBUG_UART), #endif { -- cgit v1.2.3 From a3d3ef9d4fd57cfd407c8d2d0a7daec000468ebf Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 8 Nov 2011 10:33:04 -0800 Subject: msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre Signed-off-by: Stephen Boyd Acked-by: Nicolas Pitre Signed-off-by: David Brown --- arch/arm/Kconfig.debug | 16 ++++++++++ arch/arm/mach-msm/Kconfig | 3 ++ arch/arm/mach-msm/include/mach/debug-macro.S | 32 ++++++++++++++++++-- arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 5 ++++ arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 5 ++++ arch/arm/mach-msm/include/mach/uncompress.h | 39 ++++++++++++++++++++----- arch/arm/mach-msm/io.c | 6 ++++ 7 files changed, 95 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 333b6a416d2f..4c1eb7dd2a7e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -268,6 +268,22 @@ choice Say Y here if you want the debug print routines to direct their output to the third serial port on MSM devices. + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8660 devices. + + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. + endchoice config EARLY_PRINTK diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 5b07b6104e5d..000ddf0a4f33 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -60,6 +60,9 @@ config ARCH_MSM8960 endchoice +config MSM_HAS_DEBUG_UART_HS + bool + config MSM_SOC_REV_A bool config ARCH_MSM_SCORPIONMP diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index db1f22830d64..3ffd8668c9a5 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -1,6 +1,7 @@ /* * * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -24,17 +25,42 @@ #endif .endm - .macro senduart,rd,rx + .macro senduart, rd, rx +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + @ Write the 1 character to UARTDM_TF + str \rd, [\rx, #0x70] +#else teq \rx, #0 strne \rd, [\rx, #0x0C] +#endif .endm - .macro waituart,rd,rx + .macro waituart, rd, rx +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + @ check for TX_EMT in UARTDM_SR + ldr \rd, [\rx, #0x08] + tst \rd, #0x08 + bne 1002f + @ wait for TXREADY in UARTDM_ISR +1001: ldr \rd, [\rx, #0x14] + tst \rd, #0x80 + beq 1001b +1002: + @ Clear TX_READY by writing to the UARTDM_CR register + mov \rd, #0x300 + str \rd, [\rx, #0x10] + @ Write 0x1 to NCF register + mov \rd, #0x1 + str \rd, [\rx, #0x40] + @ UARTDM reg. Read to induce delay + ldr \rd, [\rx, #0x08] +#else @ wait for TX_READY 1001: ldr \rd, [\rx, #0x08] tst \rd, #0x04 beq 1001b +#endif .endm - .macro busyuart,rd,rx + .macro busyuart, rd, rx .endm diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index 3c9d9602a318..800b55767e6b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -45,4 +45,9 @@ #define MSM8960_TMR0_PHYS 0x0208A000 #define MSM8960_TMR0_SIZE SZ_4K +#ifdef CONFIG_DEBUG_MSM8960_UART +#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_PHYS 0x16440000 +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 3b19b8f244b8..54e12caa8d86 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -62,4 +62,9 @@ #define MSM8X60_TMR0_PHYS 0x02040000 #define MSM8X60_TMR0_SIZE SZ_4K +#ifdef CONFIG_DEBUG_MSM8660_UART +#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_PHYS 0x19C40000 +#endif + #endif diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index d94292c29d8e..169a84007456 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -1,6 +1,6 @@ -/* arch/arm/mach-msm/include/mach/uncompress.h - * +/* * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,17 +14,40 @@ */ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H +#define __ASM_ARCH_MSM_UNCOMPRESS_H + +#include +#include + +#define UART_CSR (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)) +#define UART_TF (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c)) -#include "hardware.h" -#include "linux/io.h" -#include "mach/msm_iomap.h" +#define UART_DM_SR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))) +#define UART_DM_CR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10))) +#define UART_DM_ISR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14))) +#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40))) +#define UART_DM_TF (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70))) static void putc(int c) { #if defined(MSM_DEBUG_UART_PHYS) - unsigned base = MSM_DEBUG_UART_PHYS; - while (!(readl(base + 0x08) & 0x04)) ; - writel(c, base + 0x0c); +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS + /* + * Wait for TX_READY to be set; but skip it if we have a + * TX underrun. + */ + if (UART_DM_SR & 0x08) + while (!(UART_DM_ISR & 0x80)) + cpu_relax(); + + UART_DM_CR = 0x300; + UART_DM_NCHAR = 0x1; + UART_DM_TF = c; +#else + while (!(UART_CSR & 0x04)) + cpu_relax(); + UART_TF = c; +#endif #endif } diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 03036afe6266..578b04e42deb 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -111,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = { MSM_CHIP_DEVICE(TMR0, MSM8X60), MSM_DEVICE(ACC), MSM_DEVICE(GCC), +#ifdef CONFIG_DEBUG_MSM8660_UART + MSM_DEVICE(DEBUG_UART), +#endif }; void __init msm_map_msm8x60_io(void) @@ -125,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = { MSM_CHIP_DEVICE(QGIC_CPU, MSM8960), MSM_CHIP_DEVICE(TMR, MSM8960), MSM_CHIP_DEVICE(TMR0, MSM8960), +#ifdef CONFIG_DEBUG_MSM8960_UART + MSM_DEVICE(DEBUG_UART), +#endif }; void __init msm_map_msm8960_io(void) -- cgit v1.2.3 From a528721da08a793e0cec6ef6281d404eddd6e27b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Nov 2011 15:05:24 +0000 Subject: ARM: restart: add restart hook to machine_desc record Add a restart hook to the machine_desc record so we don't have to populate all platforms with init_early methods to initialize the arm_pm_restart function pointer. Acked-by: Nicolas Pitre Acked-by: Will Deacon Acked-by: H Hartley Sweeten Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/include/asm/mach/arch.h | 1 + arch/arm/kernel/setup.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 7d19425dd496..8aa397a5ea72 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -45,6 +45,7 @@ struct machine_desc { #ifdef CONFIG_MULTI_IRQ_HANDLER void (*handle_irq)(struct pt_regs *); #endif + void (*restart)(char, const char *); }; /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7e7977ab994f..4755e2827dc3 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -922,6 +922,9 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + if (mdesc->restart) + arm_pm_restart = mdesc->restart; + unflatten_device_tree(); #ifdef CONFIG_SMP -- cgit v1.2.3 From b44c350d4104265cf3a6b4355dc1ee05c16aa5de Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2011 14:27:33 +0000 Subject: ARM: restart: allow platforms more flexibility specifying restart mode Change 'soft_reboot' into a more generic 'restart_mode' variable, allowing the default restart mode to be specified. Acked-by: Nicolas Pitre Acked-by: Will Deacon Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/include/asm/mach/arch.h | 8 ++++---- arch/arm/kernel/setup.c | 4 ++-- arch/arm/mach-ebsa110/core.c | 2 +- arch/arm/mach-footbridge/cats-hw.c | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 8aa397a5ea72..6fe6cf0895c9 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -30,10 +30,10 @@ struct machine_desc { unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ - unsigned int reserve_lp0 :1; /* never has lp0 */ - unsigned int reserve_lp1 :1; /* never has lp1 */ - unsigned int reserve_lp2 :1; /* never has lp2 */ - unsigned int soft_reboot :1; /* soft reboot */ + unsigned char reserve_lp0 :1; /* never has lp0 */ + unsigned char reserve_lp1 :1; /* never has lp1 */ + unsigned char reserve_lp2 :1; /* never has lp2 */ + char restart_mode; /* default restart mode */ void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 4755e2827dc3..a753880e984b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,8 +902,8 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; - if (mdesc->soft_reboot) - reboot_setup("s"); + if (mdesc->restart_mode) + reboot_setup(&mdesc->restart_mode); init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index d0ce8abdd4b6..ce3ed244c4b0 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -283,7 +283,7 @@ MACHINE_START(EBSA110, "EBSA110") .atag_offset = 0x400, .reserve_lp0 = 1, .reserve_lp2 = 1, - .soft_reboot = 1, + .restart_mode = 's', .map_io = ebsa110_map_io, .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index d5f178540928..60b6774e1eaa 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -86,7 +86,7 @@ fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi) MACHINE_START(CATS, "Chalice-CATS") /* Maintainer: Philip Blundell */ .atag_offset = 0x100, - .soft_reboot = 1, + .restart_mode = 's', .fixup = fixup_cats, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, -- cgit v1.2.3 From 34adeda943e1fb10e8de022b834996e04241fa7d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2011 16:24:18 +0000 Subject: ARM: restart: add default restart modes for PXA mioa701, spitz and tosa Add a default restart mode to reflect the hard-coded restart mode found in these files. Acked-by: Nicolas Pitre Acked-by: Will Deacon Acked-by: H Hartley Sweeten Acked-by: Robert Jarzmik Signed-off-by: Russell King --- arch/arm/mach-pxa/mioa701.c | 1 + arch/arm/mach-pxa/spitz.c | 3 +++ arch/arm/mach-pxa/tosa.c | 1 + 3 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index b938fc2c316a..4f47a760398f 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -752,6 +752,7 @@ static void mioa701_machine_exit(void) MACHINE_START(MIOA701, "MIO A701") .atag_offset = 0x100, + .restart_mode = 's', .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 953a9195f9e5..2f57d94de727 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -982,6 +982,7 @@ static void __init spitz_fixup(struct tag *tags, char **cmdline, #ifdef CONFIG_MACH_SPITZ MACHINE_START(SPITZ, "SHARP Spitz") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, @@ -993,6 +994,7 @@ MACHINE_END #ifdef CONFIG_MACH_BORZOI MACHINE_START(BORZOI, "SHARP Borzoi") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, @@ -1004,6 +1006,7 @@ MACHINE_END #ifdef CONFIG_MACH_AKITA MACHINE_START(AKITA, "SHARP Akita") + .restart_mode = 'g', .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 402b0c96613b..ef6453041cf1 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -970,6 +970,7 @@ static void __init fixup_tosa(struct tag *tags, char **cmdline, } MACHINE_START(TOSA, "SHARP Tosa") + .restart_mode = 'g', .fixup = fixup_tosa, .map_io = pxa25x_map_io, .nr_irqs = TOSA_NR_IRQS, -- cgit v1.2.3 From ac15e00b1efe705b66a36d1a6a9db7f6ed524c43 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 31 Oct 2011 09:22:22 +0000 Subject: ARM: restart: move reboot failure handing into machine_restart() Move the failure to reboot into machine_restart() to always catch this condition, even if a platform decides to hook the restarting via arm_pm_restart(). Acked-by: Nicolas Pitre Acked-by: Will Deacon Acked-by: H Hartley Sweeten Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/kernel/process.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 75316f0dd02a..3bda1c379776 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -114,18 +114,8 @@ void arm_machine_restart(char mode, const char *cmd) /* Push out any further dirty data, and ensure cache is empty */ flush_cache_all(); - /* - * Now call the architecture specific reboot code. - */ + /* Now call the architecture specific reboot code. */ arch_reset(mode, cmd); - - /* - * Whoops - the architecture was unable to reboot. - * Tell the user! - */ - mdelay(1000); - printk("Reboot failed -- System halted\n"); - while (1); } /* @@ -250,7 +240,15 @@ void machine_power_off(void) void machine_restart(char *cmd) { machine_shutdown(); + arm_pm_restart(reboot_mode, cmd); + + /* Give a grace period for failure to restart of 1s */ + mdelay(1000); + + /* Whoops - the platform was unable to reboot. Tell the user! */ + printk("Reboot failed -- System halted\n"); + while (1); } void __show_regs(struct pt_regs *regs) -- cgit v1.2.3 From 5aafec15bdc54cf0722696c95091d7bd674bfcad Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2011 10:15:27 +0000 Subject: ARM: restart: remove argument to setup_mm_for_reboot() setup_mm_for_reboot() doesn't make use of its argument, so remove it. Acked-by: Nicolas Pitre Acked-by: Will Deacon Acked-by: H Hartley Sweeten Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/kernel/machine_kexec.c | 4 ++-- arch/arm/kernel/process.c | 4 ++-- arch/arm/mm/idmap.c | 2 +- arch/arm/mm/nommu.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index c1b4463dcc83..cc40b965d42a 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -16,7 +16,7 @@ extern const unsigned char relocate_new_kernel[]; extern const unsigned int relocate_new_kernel_size; -extern void setup_mm_for_reboot(char mode); +extern void setup_mm_for_reboot(void); extern unsigned long kexec_start_address; extern unsigned long kexec_indirection_page; @@ -114,7 +114,7 @@ void machine_kexec(struct kimage *image) kexec_reinit(); local_irq_disable(); local_fiq_disable(); - setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/ + setup_mm_for_reboot(); flush_cache_all(); outer_flush_all(); outer_disable(); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 3bda1c379776..4181738452fc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -57,7 +57,7 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void setup_mm_for_reboot(char mode); +extern void setup_mm_for_reboot(void); static volatile int hlt_counter; @@ -103,7 +103,7 @@ void arm_machine_restart(char mode, const char *cmd) * we may need it to insert some 1:1 mappings so that * soft boot works. */ - setup_mm_for_reboot(mode); + setup_mm_for_reboot(); /* Clean and invalidate caches */ flush_cache_all(); diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 2be9139a4ef3..296ad2eaddb0 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -78,7 +78,7 @@ void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) * the user-mode pages. This will then ensure that we have predictable * results when turning the mmu off */ -void setup_mm_for_reboot(char mode) +void setup_mm_for_reboot(void) { /* * We need to access to user-mode page tables here. For kernel threads diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 941a98c9e8aa..88417514b2c6 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -43,7 +43,7 @@ void __init paging_init(struct machine_desc *mdesc) /* * We don't need to do anything here for nommu machines. */ -void setup_mm_for_reboot(char mode) +void setup_mm_for_reboot(void) { } -- cgit v1.2.3 From 2b222a2971e4d73fc25c09aeb203c16c0c3c142e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 19 Sep 2011 10:54:04 -0700 Subject: msm: platsmp: Mark ioremapped memory as __iomem Fixes a handful of sparse warnings. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index fdec58aaa35c..0b3e357c4c8c 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu) ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), SCM_FLAG_COLDBOOT_CPU1); if (ret == 0) { - void *sc1_base_ptr; + void __iomem *sc1_base_ptr; sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2); if (sc1_base_ptr) { writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL); -- cgit v1.2.3 From db0d4db22a78d31c59087f7057b8f1612fecc35d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 12 Nov 2011 16:09:49 +0000 Subject: ARM: gic: allow GIC to support non-banked setups The GIC support code is heavily using the fact that hardware implementations are exposing banked registers. Unfortunately, it looks like at least one GIC implementation (EXYNOS) offers both the distributor and the CPU interfaces at different addresses, depending on the CPU. This problem is solved by allowing the distributor and CPU interface addresses to be per-cpu variables for the platforms that require it. The EXYNOS code is updated not to mess with the GIC internals while handling interrupts, and struct gic_chip_data is back to being private. The DT binding for the gic is updated to allow an optional "cpu-offset" value, which is used to compute the various base addresses. Finally, a new config option (GIC_NON_BANKED) is used to control this feature, so the overhead is only present on kernels compiled with support for EXYNOS. Tested on Origen (EXYNOS4) and Panda (OMAP4). Cc: Kukjin Kim Cc: Will Deacon Cc: Thomas Abraham Acked-by: Rob Herring Signed-off-by: Marc Zyngier --- Documentation/devicetree/bindings/arm/gic.txt | 4 + arch/arm/common/Kconfig | 3 + arch/arm/common/gic.c | 133 ++++++++++++++++++++++---- arch/arm/include/asm/hardware/gic.h | 24 ++--- arch/arm/mach-exynos/cpu.c | 16 +--- arch/arm/mach-exynos/platsmp.c | 28 +----- arch/arm/plat-s5p/Kconfig | 1 + 7 files changed, 132 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 52916b4aa1fe..9b4b82a721b6 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -42,6 +42,10 @@ Optional - interrupts : Interrupt source of the parent interrupt controller. Only present on secondary GICs. +- cpu-offset : per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset is + cpu-offset * cpu-nr. + Example: intc: interrupt-controller@fff11000 { diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 74df9ca2be31..a3beda1213da 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -2,6 +2,9 @@ config ARM_GIC select IRQ_DOMAIN bool +config GIC_NON_BANKED + bool + config ARM_VIC bool diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 0e6ae470c94f..43cb6f1a7cf2 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -43,6 +43,31 @@ #include #include +union gic_base { + void __iomem *common_base; + void __percpu __iomem **percpu_base; +}; + +struct gic_chip_data { + unsigned int irq_offset; + union gic_base dist_base; + union gic_base cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif +#ifdef CONFIG_IRQ_DOMAIN + struct irq_domain domain; +#endif + unsigned int gic_irqs; +#ifdef CONFIG_GIC_NON_BANKED + void __iomem *(*get_base)(union gic_base *); +#endif +}; + static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ @@ -67,16 +92,48 @@ struct irq_chip gic_arch_extn = { static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; +#ifdef CONFIG_GIC_NON_BANKED +static void __iomem *gic_get_percpu_base(union gic_base *base) +{ + return *__this_cpu_ptr(base->percpu_base); +} + +static void __iomem *gic_get_common_base(union gic_base *base) +{ + return base->common_base; +} + +static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data) +{ + return data->get_base(&data->dist_base); +} + +static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data) +{ + return data->get_base(&data->cpu_base); +} + +static inline void gic_set_base_accessor(struct gic_chip_data *data, + void __iomem *(*f)(union gic_base *)) +{ + data->get_base = f; +} +#else +#define gic_data_dist_base(d) ((d)->dist_base.common_base) +#define gic_data_cpu_base(d) ((d)->cpu_base.common_base) +#define gic_set_base_accessor(d,f) +#endif + static inline void __iomem *gic_dist_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->dist_base; + return gic_data_dist_base(gic_data); } static inline void __iomem *gic_cpu_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data->cpu_base; + return gic_data_cpu_base(gic_data); } static inline unsigned int gic_irq(struct irq_data *d) @@ -225,7 +282,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); raw_spin_lock(&irq_controller_lock); - status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK); + status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK); raw_spin_unlock(&irq_controller_lock); gic_irq = (status & 0x3ff); @@ -270,7 +327,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; - void __iomem *base = gic->dist_base; + void __iomem *base = gic_data_dist_base(gic); u32 cpu = 0; #ifdef CONFIG_SMP @@ -330,8 +387,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic) static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { - void __iomem *dist_base = gic->dist_base; - void __iomem *base = gic->cpu_base; + void __iomem *dist_base = gic_data_dist_base(gic); + void __iomem *base = gic_data_cpu_base(gic); int i; /* @@ -368,7 +425,7 @@ static void gic_dist_save(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -403,7 +460,7 @@ static void gic_dist_restore(unsigned int gic_nr) BUG(); gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data[gic_nr].dist_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); if (!dist_base) return; @@ -439,8 +496,8 @@ static void gic_cpu_save(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -465,8 +522,8 @@ static void gic_cpu_restore(unsigned int gic_nr) if (gic_nr >= MAX_GIC_NR) BUG(); - dist_base = gic_data[gic_nr].dist_base; - cpu_base = gic_data[gic_nr].cpu_base; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); if (!dist_base || !cpu_base) return; @@ -491,6 +548,11 @@ static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) int i; for (i = 0; i < MAX_GIC_NR; i++) { +#ifdef CONFIG_GIC_NON_BANKED + /* Skip over unused GICs */ + if (!gic_data[i].get_base) + continue; +#endif switch (cmd) { case CPU_PM_ENTER: gic_cpu_save(i); @@ -563,8 +625,9 @@ const struct irq_domain_ops gic_irq_domain_ops = { #endif }; -void __init gic_init(unsigned int gic_nr, int irq_start, - void __iomem *dist_base, void __iomem *cpu_base) +void __init gic_init_bases(unsigned int gic_nr, int irq_start, + void __iomem *dist_base, void __iomem *cpu_base, + u32 percpu_offset) { struct gic_chip_data *gic; struct irq_domain *domain; @@ -574,8 +637,36 @@ void __init gic_init(unsigned int gic_nr, int irq_start, gic = &gic_data[gic_nr]; domain = &gic->domain; - gic->dist_base = dist_base; - gic->cpu_base = cpu_base; +#ifdef CONFIG_GIC_NON_BANKED + if (percpu_offset) { /* Frankein-GIC without banked registers... */ + unsigned int cpu; + + gic->dist_base.percpu_base = alloc_percpu(void __iomem *); + gic->cpu_base.percpu_base = alloc_percpu(void __iomem *); + if (WARN_ON(!gic->dist_base.percpu_base || + !gic->cpu_base.percpu_base)) { + free_percpu(gic->dist_base.percpu_base); + free_percpu(gic->cpu_base.percpu_base); + return; + } + + for_each_possible_cpu(cpu) { + unsigned long offset = percpu_offset * cpu_logical_map(cpu); + *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; + *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; + } + + gic_set_base_accessor(gic, gic_get_percpu_base); + } else +#endif + { /* Normal, sane GIC... */ + WARN(percpu_offset, + "GIC_NON_BANKED not enabled, ignoring %08x offset!", + percpu_offset); + gic->dist_base.common_base = dist_base; + gic->cpu_base.common_base = cpu_base; + gic_set_base_accessor(gic, gic_get_common_base); + } /* * For primary GICs, skip over SGIs. @@ -593,7 +684,7 @@ void __init gic_init(unsigned int gic_nr, int irq_start, * Find out how many interrupts are supported. * The GIC only supports up to 1020 interrupt sources. */ - gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f; + gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f; gic_irqs = (gic_irqs + 1) * 32; if (gic_irqs > 1020) gic_irqs = 1020; @@ -641,7 +732,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) dsb(); /* this always happens on GIC0 */ - writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); + writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); } #endif @@ -652,6 +743,7 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *cpu_base; void __iomem *dist_base; + u32 percpu_offset; int irq; struct irq_domain *domain = &gic_data[gic_cnt].domain; @@ -664,9 +756,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent) cpu_base = of_iomap(node, 1); WARN(!cpu_base, "unable to map gic cpu registers\n"); + if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + domain->of_node = of_node_get(node); - gic_init(gic_cnt, -1, dist_base, cpu_base); + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset); if (parent) { irq = irq_of_parse_and_map(node, 0); diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 3e91f22046f5..2721d90625e5 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -39,27 +39,19 @@ struct device_node; extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; -void gic_init(unsigned int, int, void __iomem *, void __iomem *); +void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, + u32 offset); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -struct gic_chip_data { - void __iomem *dist_base; - void __iomem *cpu_base; -#ifdef CONFIG_CPU_PM - u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; - u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; - u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; - u32 __percpu *saved_ppi_enable; - u32 __percpu *saved_ppi_conf; -#endif -#ifdef CONFIG_IRQ_DOMAIN - struct irq_domain domain; -#endif - unsigned int gic_irqs; -}; +static inline void gic_init(unsigned int nr, int start, + void __iomem *dist , void __iomem *cpu) +{ + gic_init_bases(nr, start, dist, cpu, 0); +} + #endif #endif diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c index 90ec247f3b37..e92e464bdbba 100644 --- a/arch/arm/mach-exynos/cpu.c +++ b/arch/arm/mach-exynos/cpu.c @@ -207,27 +207,13 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } -static void exynos4_gic_irq_fix_base(struct irq_data *d) -{ - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - - gic_data->cpu_base = S5P_VA_GIC_CPU + - (gic_bank_offset * smp_processor_id()); - - gic_data->dist_base = S5P_VA_GIC_DIST + - (gic_bank_offset * smp_processor_id()); -} - void __init exynos4_init_irq(void) { int irq; gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; - gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; - gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; + gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset); for (irq = 0; irq < MAX_COMBINER_NR; irq++) { diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 69ffb2fb3875..60bc45e3e709 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,7 +32,6 @@ #include -extern unsigned int gic_bank_offset; extern void exynos4_secondary_startup(void); #define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ @@ -65,31 +64,6 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit exynos4_gic_secondary_init(void) -{ - void __iomem *dist_base = S5P_VA_GIC_DIST + - (gic_bank_offset * smp_processor_id()); - void __iomem *cpu_base = S5P_VA_GIC_CPU + - (gic_bank_offset * smp_processor_id()); - int i; - - /* - * Deal with the banked PPI and SGI interrupts - disable all - * PPI interrupts, ensure all SGI interrupts are enabled. - */ - __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); - __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); - - /* - * Set priority on PPI and SGI interrupts - */ - for (i = 0; i < 32; i += 4) - __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); - - __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK); - __raw_writel(1, cpu_base + GIC_CPU_CTRL); -} - void __cpuinit platform_secondary_init(unsigned int cpu) { /* @@ -97,7 +71,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - exynos4_gic_secondary_init(); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9b9968fa8695..8167ce66188c 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -11,6 +11,7 @@ config PLAT_S5P default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 + select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK -- cgit v1.2.3 From abeb24ae4d3e543ecf0104cff08a3af4e7a42479 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 09:23:26 +0100 Subject: ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive Even when CONFIG_MULTI_IRQ_HANDLER is selected, the core code requires the arch_irq_handler_default macro to be defined as a fallback. It turns out nobody is using that particular feature as both PXA and shmobile have all their machine descriptors populated with the interrupt handler, leaving unused code (or empty macros) in their entry-macro.S file just to be able to compile entry-armv.S. Make CONFIG_MULTI_IRQ_HANDLER exclusive wrt arch_irq_handler_default, which allows to remove one test from the hot path. Also cleanup both PXA and shmobile entry-macro.S. Cc: Paul Mundt Acked-by: Nicolas Pitre Acked-by: Eric Miao Tested-by: Jamie Iles Signed-off-by: Marc Zyngier --- arch/arm/kernel/entry-armv.S | 7 ++--- arch/arm/mach-pxa/include/mach/entry-macro.S | 36 ----------------------- arch/arm/mach-shmobile/include/mach/entry-macro.S | 9 ------ 3 files changed, 3 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 9ad50c4208ae..bd49a6a2a17d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -36,12 +36,11 @@ #ifdef CONFIG_MULTI_IRQ_HANDLER ldr r1, =handle_arch_irq mov r0, sp - ldr r1, [r1] adr lr, BSYM(9997f) - teq r1, #0 - movne pc, r1 -#endif + ldr pc, [r1] +#else arch_irq_handler_default +#endif 9997: .endm diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index a73bc86a3c26..260c0c17692a 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -7,45 +7,9 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include -#include .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p15, 0, \tmp, c0, c0, 0 @ CPUID - mov \tmp, \tmp, lsr #13 - and \tmp, \tmp, #0x7 @ Core G - cmp \tmp, #1 - bhi 1002f - - @ Core Generation 1 (PXA25x) - mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 - add \base, \base, #0x00d00000 - ldr \irqstat, [\base, #0] @ ICIP - ldr \irqnr, [\base, #4] @ ICMR - - ands \irqnr, \irqstat, \irqnr - beq 1001f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0)) - b 1001f -1002: - @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx) - mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP - tst \irqstat, #0x80000000 - beq 1001f - bic \irqstat, \irqstat, #0x80000000 - mov \irqnr, \irqstat, lsr #16 - add \irqnr, \irqnr, #(PXA_IRQ(0)) -1001: - .endm diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index 8d4a416d4285..2a57b2964ee9 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -18,14 +18,5 @@ .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - .endm - - .macro test_for_ipi, irqnr, irqstat, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm -- cgit v1.2.3 From baeeb8229cace91c10c856d91e5ca861d3c44968 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 2 Nov 2011 15:28:49 +0000 Subject: ARM: mxc: rename gic_handle_irq to avoid name clash Before introducing a global gic_handle_irq(), rename MXC's version to mxc_gic_handle_irq(). This function will be removed altogether in a later patch. Cc: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Marc Zyngier --- arch/arm/plat-mxc/gic.c | 2 +- arch/arm/plat-mxc/include/mach/common.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c index 12f8f8109010..ea51ea4aba67 100644 --- a/arch/arm/plat-mxc/gic.c +++ b/arch/arm/plat-mxc/gic.c @@ -18,7 +18,7 @@ #include #endif -asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) +asmlinkage void __exception_irq_entry mxc_gic_handle_irq(struct pt_regs *regs) { u32 irqstat, irqnr; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 83b745a5e1b7..d7c290d32e3e 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -90,7 +90,7 @@ extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); -void gic_handle_irq(struct pt_regs *); +void mxc_gic_handle_irq(struct pt_regs *); #define imx1_handle_irq avic_handle_irq #define imx21_handle_irq avic_handle_irq @@ -101,7 +101,7 @@ void gic_handle_irq(struct pt_regs *); #define imx50_handle_irq tzic_handle_irq #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -#define imx6q_handle_irq gic_handle_irq +#define imx6q_handle_irq mxc_gic_handle_irq extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); -- cgit v1.2.3 From 562e0027d21bf64838178e2f5157df3d5833972e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 09:56:17 +0100 Subject: ARM: GIC: Add global gic_handle_irq() function Provide the GIC code with a low level handler that can be used by platforms using CONFIG_MULTI_IRQ_HANDLER. Signed-off-by: Marc Zyngier --- arch/arm/common/gic.c | 27 +++++++++++++++++++++++++++ arch/arm/include/asm/hardware/gic.h | 1 + 2 files changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 43cb6f1a7cf2..3c78b7c60691 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -40,6 +40,7 @@ #include #include +#include #include #include @@ -272,6 +273,32 @@ static int gic_set_wake(struct irq_data *d, unsigned int on) #define gic_set_wake NULL #endif +asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) +{ + u32 irqstat, irqnr; + struct gic_chip_data *gic = &gic_data[0]; + void __iomem *cpu_base = gic_data_cpu_base(gic); + + do { + irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); + irqnr = irqstat & ~0x1c00; + + if (likely(irqnr > 15 && irqnr < 1021)) { + irqnr = irq_domain_to_irq(&gic->domain, irqnr); + handle_IRQ(irqnr, regs); + continue; + } + if (irqnr < 16) { + writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); +#ifdef CONFIG_SMP + handle_IPI(irqnr, regs); +#endif + continue; + } + break; + } while (1); +} + static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { struct gic_chip_data *chip_data = irq_get_handler_data(irq); diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 2721d90625e5..ecf7c02fa16c 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -43,6 +43,7 @@ void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset); int gic_of_init(struct device_node *node, struct device_node *parent); void gic_secondary_init(unsigned int); +void gic_handle_irq(struct pt_regs *regs); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); -- cgit v1.2.3 From fea9fe8329c74159fb2030f1aacf29fdab9fc6d6 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: imx: convert smp platforms to global gic_handle_irq() Convert the SMP imx platforms to use the global gic_handle_irq() function instead a private function. Cc: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Marc Zyngier --- arch/arm/plat-mxc/Makefile | 1 - arch/arm/plat-mxc/gic.c | 41 ---------------------------- arch/arm/plat-mxc/include/mach/common.h | 3 +- arch/arm/plat-mxc/include/mach/entry-macro.S | 11 -------- 4 files changed, 1 insertion(+), 55 deletions(-) delete mode 100644 arch/arm/plat-mxc/gic.c (limited to 'arch') diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index b9f0f5f499a4..076db84f3e31 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -5,7 +5,6 @@ # Common support obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o -obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c deleted file mode 100644 index ea51ea4aba67..000000000000 --- a/arch/arm/plat-mxc/gic.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#ifdef CONFIG_SMP -#include -#endif - -asmlinkage void __exception_irq_entry mxc_gic_handle_irq(struct pt_regs *regs) -{ - u32 irqstat, irqnr; - - do { - irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK); - irqnr = irqstat & 0x3ff; - if (irqnr == 1023) - break; - - if (irqnr > 15 && irqnr < 1021) - handle_IRQ(irqnr, regs); -#ifdef CONFIG_SMP - else { - writel_relaxed(irqstat, gic_cpu_base_addr + - GIC_CPU_EOI); - handle_IPI(irqnr, regs); - } -#endif - } while (1); -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index d7c290d32e3e..14b4703e6e46 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -90,7 +90,6 @@ extern void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); -void mxc_gic_handle_irq(struct pt_regs *); #define imx1_handle_irq avic_handle_irq #define imx21_handle_irq avic_handle_irq @@ -101,7 +100,7 @@ void mxc_gic_handle_irq(struct pt_regs *); #define imx50_handle_irq tzic_handle_irq #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -#define imx6q_handle_irq mxc_gic_handle_irq +#define imx6q_handle_irq gic_handle_irq extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index ca5cf26a04b1..def5d30cb67e 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -9,19 +9,8 @@ * published by the Free Software Foundation. */ -/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */ - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - .endm - - .macro test_for_ipi, irqnr, irqstat, base, tmp - .endm -- cgit v1.2.3 From 7e01799c669c60460dce43556065ca3b66760dcf Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: highbank: convert to CONFIG_MULTI_IRQ_HANDLER Convert the highbank platform to be using the gic_handle_irq function as its primary interrupt handler. Cc: Rob Herring Signed-off-by: Marc Zyngier --- arch/arm/Kconfig | 1 + arch/arm/mach-highbank/highbank.c | 1 + arch/arm/mach-highbank/include/mach/entry-macro.S | 2 -- 3 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789eff983f..5c014c6f056d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -345,6 +345,7 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select USE_OF + select MULTI_IRQ_HANDLER help Support for the Calxeda Highbank SoC based boards. diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index b82dcf08e747..89bdf0039f7b 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -140,6 +140,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank") .map_io = highbank_map_io, .init_irq = highbank_init_irq, .timer = &highbank_timer, + .handle_irq = gic_handle_irq, .init_machine = highbank_init, .dt_compat = highbank_match, MACHINE_END diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S index 73c11297509e..a14f9e62ca92 100644 --- a/arch/arm/mach-highbank/include/mach/entry-macro.S +++ b/arch/arm/mach-highbank/include/mach/entry-macro.S @@ -1,5 +1,3 @@ -#include - .macro disable_fiq .endm -- cgit v1.2.3 From 1b99d9ccb52d64bfdab0d58915909b10cbbdf9e1 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER Convert the RealView platforms to be using the gic_handle_irq function as their primary interrupt handler. Signed-off-by: Marc Zyngier --- arch/arm/Kconfig | 1 + arch/arm/mach-realview/include/mach/entry-macro.S | 2 -- arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-realview/realview_pb1176.c | 1 + arch/arm/mach-realview/realview_pb11mp.c | 1 + arch/arm/mach-realview/realview_pba8.c | 1 + arch/arm/mach-realview/realview_pbx.c | 1 + 7 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c014c6f056d..5f3b7fedc662 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -278,6 +278,7 @@ config ARCH_REALVIEW select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB select NEED_MACH_MEMORY_H + select MULTI_IRQ_HANDLER help This enables support for ARM Ltd RealView boards. diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S index 4071164aebaa..e8a5179c2653 100644 --- a/arch/arm/mach-realview/include/mach/entry-macro.S +++ b/arch/arm/mach-realview/include/mach/entry-macro.S @@ -7,8 +7,6 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include -#include .macro disable_fiq .endm diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 026c66ad7ec2..10ef2e74cce5 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -469,6 +469,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_eb_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index c057540ec776..bd8fec8b20d9 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -392,6 +392,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pb1176_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 671ad6d6ff00..fa73ba81a449 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -366,6 +366,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pb11mp_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index cbf22df4ad5b..6e5f2b9ddb7e 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -316,6 +316,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pba8_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 63c4114afae9..291bf1a8f2f0 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -399,6 +399,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, + .handle_irq = gic_handle_irq, .init_machine = realview_pbx_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, -- cgit v1.2.3 From abd3ca51fba8bc200ae78e99bd1ac19c4e3b6781 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: VExpress: convert to CONFIG_MULTI_IRQ_HANDLER Convert the VExpress platform to be using the gic_handle_irq function as its primary interrupt handler. Signed-off-by: Marc Zyngier --- arch/arm/Kconfig | 1 + arch/arm/mach-vexpress/include/mach/entry-macro.S | 2 -- arch/arm/mach-vexpress/v2m.c | 2 ++ 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5f3b7fedc662..8f39263c0768 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -311,6 +311,7 @@ config ARCH_VEXPRESS select ICST select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select MULTI_IRQ_HANDLER help This enables support for the ARM Ltd Versatile Express boards. diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S index 73c11297509e..a14f9e62ca92 100644 --- a/arch/arm/mach-vexpress/include/mach/entry-macro.S +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -1,5 +1,3 @@ -#include - .macro disable_fiq .endm diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 1fafc3244607..7aa07a8ce232 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -448,5 +449,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_early = v2m_init_early, .init_irq = v2m_init_irq, .timer = &v2m_timer, + .handle_irq = gic_handle_irq, .init_machine = v2m_init, MACHINE_END -- cgit v1.2.3 From 041f777c93bab29565d999a292b9b9b533fe6f5e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER Convert the SMP msm platforms to be using the gic_handle_irq function as their primary interrupt handler. Tested-by: David Brown Acked-by: David Brown Signed-off-by: Marc Zyngier --- arch/arm/mach-msm/Kconfig | 2 ++ arch/arm/mach-msm/board-msm8960.c | 2 ++ arch/arm/mach-msm/board-msm8x60.c | 4 +++ arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 17 ----------- arch/arm/mach-msm/include/mach/entry-macro-vic.S | 37 ----------------------- arch/arm/mach-msm/include/mach/entry-macro.S | 27 ++++++++++++++--- 6 files changed, 31 insertions(+), 58 deletions(-) delete mode 100644 arch/arm/mach-msm/include/mach/entry-macro-qgic.S delete mode 100644 arch/arm/mach-msm/include/mach/entry-macro-vic.S (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index ebde97f5d5f0..ba36b74881c6 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -50,6 +50,7 @@ config ARCH_MSM8X60 select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP + select MULTI_IRQ_HANDLER config ARCH_MSM8960 bool "MSM8960" @@ -60,6 +61,7 @@ config ARCH_MSM8960 select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP + select MULTI_IRQ_HANDLER endchoice diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 6dc1cbd2a595..ed3598128530 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -99,6 +99,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .handle_irq = gic_handle_irq, .init_machine = msm8960_sim_init, MACHINE_END @@ -108,6 +109,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .handle_irq = gic_handle_irq, .init_machine = msm8960_rumi3_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 44bf71688373..0a113424632c 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -108,6 +108,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -117,6 +118,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -126,6 +128,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END @@ -135,6 +138,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .timer = &msm_timer, MACHINE_END diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S deleted file mode 100644 index 717076f3ca73..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Low-level IRQ helper macros - * - * Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S deleted file mode 100644 index 70563ed11b36..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro-vic.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S index b16f082eeb6f..41f7003ef34f 100644 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ b/arch/arm/mach-msm/include/mach/entry-macro.S @@ -16,8 +16,27 @@ * */ -#if defined(CONFIG_ARM_GIC) -#include -#else -#include + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +#if !defined(CONFIG_ARM_GIC) +#include + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm #endif -- cgit v1.2.3 From 4e44d2cb95bd93abe16a131dbcd4c052ae36665f Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 30 May 2011 11:04:53 +0100 Subject: ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER Convert the Exynos4 platforms to be using the gic_handle_irq function as their primary interrupt handler. Cc: Ben Dooks Cc: Kukjin Kim Signed-off-by: Marc Zyngier --- arch/arm/Kconfig | 1 + arch/arm/mach-exynos/cpu.c | 4 +- arch/arm/mach-exynos/include/mach/entry-macro.S | 75 ------------------------- arch/arm/mach-exynos/mach-armlex4210.c | 2 + arch/arm/mach-exynos/mach-nuri.c | 2 + arch/arm/mach-exynos/mach-origen.c | 2 + arch/arm/mach-exynos/mach-smdk4x12.c | 3 + arch/arm/mach-exynos/mach-smdkv310.c | 3 + arch/arm/mach-exynos/mach-universal_c210.c | 4 +- 9 files changed, 18 insertions(+), 78 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8f39263c0768..d897255bcdf5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -854,6 +854,7 @@ config ARCH_EXYNOS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select NEED_MACH_MEMORY_H + select MULTI_IRQ_HANDLER help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c index e92e464bdbba..6e34485caa36 100644 --- a/arch/arm/mach-exynos/cpu.c +++ b/arch/arm/mach-exynos/cpu.c @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -33,8 +34,6 @@ #include #include -unsigned int gic_bank_offset __read_mostly; - extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); @@ -210,6 +209,7 @@ void __init exynos4_init_clocks(int xtal) void __init exynos4_init_irq(void) { int irq; + unsigned int bank_offset; gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S index f5e9fd8e37b4..3ba4f547534b 100644 --- a/arch/arm/mach-exynos/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos/include/mach/entry-macro.S @@ -9,83 +9,8 @@ * warranty of any kind, whether express or implied. */ -#include -#include -#include - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - mov \tmp, #0 - - mrc p15, 0, \base, c0, c0, 5 - and \base, \base, #3 - cmp \base, #0 - beq 1f - - ldr \tmp, =gic_bank_offset - ldr \tmp, [\tmp] - cmp \base, #1 - beq 1f - - cmp \base, #2 - addeq \tmp, \tmp, \tmp - addne \tmp, \tmp, \tmp, LSL #1 - -1: ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - add \base, \base, \tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index f0ca6c157d29..49da3089249a 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -16,6 +16,7 @@ #include #include +#include #include #include @@ -210,6 +211,7 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, + .handle_irq = gic_handle_irq, .init_machine = armlex4210_machine_init, .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 236bbe187163..5acec11821a4 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -32,6 +32,7 @@ #include #include +#include #include #include @@ -1333,6 +1334,7 @@ MACHINE_START(NURI, "NURI") .atag_offset = 0x100, .init_irq = exynos4_init_irq, .map_io = nuri_map_io, + .handle_irq = gic_handle_irq, .init_machine = nuri_machine_init, .timer = &exynos4_timer, .reserve = &nuri_reserve, diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f80b563f2be7..5561b06c38ec 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -22,6 +22,7 @@ #include #include +#include #include #include