From 9495d1e23dfccb1b0a97a85c59b79a26eddda778 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Sep 2012 12:24:48 +0300 Subject: ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices. Manufacturers can opt to use different codec than twl6040 and also can add audio related IC to the bus (external amplifier for example on SDP4430). Make it possible to add different set of additional devices to i2c1 bus on OMAP4 boards. Signed-off-by: Peter Ujfalusi [tony@atomide.com: updated for removal of irqs.h] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 12 +++++++++-- arch/arm/mach-omap2/board-omap4panda.c | 12 +++++++++-- arch/arm/mach-omap2/twl-common.c | 37 ++++++++++------------------------ arch/arm/mach-omap2/twl-common.h | 3 ++- 4 files changed, 33 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e82098fbedd6..749ce9634e8e 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -545,6 +545,14 @@ static struct twl6040_platform_data twl6040_data = { .audpwron_gpio = 127, }; +static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = { + { + I2C_BOARD_INFO("twl6040", 0x4b), + .irq = 119 + OMAP44XX_IRQ_GIC_START, + .platform_data = &twl6040_data, + }, +}; + static struct twl4030_platform_data sdp4430_twldata = { /* Regulators */ .vusim = &sdp4430_vusim, @@ -578,8 +586,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_CLK32KG | TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); - omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); + omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo, + ARRAY_SIZE(sdp4430_i2c_1_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 45fe2d3f59b1..7b592d3d7797 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -264,6 +264,14 @@ static struct twl6040_platform_data twl6040_data = { .audpwron_gpio = 127, }; +static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = { + { + I2C_BOARD_INFO("twl6040", 0x4b), + .irq = 119 + OMAP44XX_IRQ_GIC_START, + .platform_data = &twl6040_data, + }, +}; + /* Panda board uses the common PMIC configuration */ static struct twl4030_platform_data omap4_panda_twldata; @@ -291,8 +299,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_CLK32KG | TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); - omap4_pmic_init("twl6030", &omap4_panda_twldata, - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); + omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo, + ARRAY_SIZE(panda_i2c_1_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 99be94e94547..af93acccc70b 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -40,16 +40,6 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; -static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { - { - .addr = 0x48, - .flags = I2C_CLIENT_WAKE, - }, - { - I2C_BOARD_INFO("twl6040", 0x4b), - }, -}; - #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { @@ -79,30 +69,25 @@ void __init omap_pmic_init(int bus, u32 clkrate, void __init omap4_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data, - struct twl6040_platform_data *twl6040_data, int twl6040_irq) + struct i2c_board_info *devices, int nr_devices) { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - strncpy(omap4_i2c1_board_info[0].type, pmic_type, - sizeof(omap4_i2c1_board_info[0].type)); - omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; - omap4_i2c1_board_info[0].platform_data = pmic_data; - - /* TWL6040 audio IC part */ - omap4_i2c1_board_info[1].irq = twl6040_irq; - omap4_i2c1_board_info[1].platform_data = twl6040_data; - - omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); + /* Register additional devices on i2c1 bus if needed */ + if (devices) + i2c_register_board_info(1, devices, nr_devices); } void __init omap_pmic_late_init(void) { - /* Init the OMAP TWL parameters (if PMIC has been registered) */ - if (pmic_i2c_board_info.irq) - omap3_twl_init(); - if (omap4_i2c1_board_info[0].irq) - omap4_twl_init(); + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index d109c09ef34b..2256efe90cf1 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -32,6 +32,7 @@ struct twl4030_platform_data; struct twl6040_platform_data; +struct i2c_board_info; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -51,7 +52,7 @@ static inline void omap3_pmic_init(const char *pmic_type, void omap4_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data, - struct twl6040_platform_data *audio_data, int twl6040_irq); + struct i2c_board_info *devices, int nr_devices); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); -- cgit v1.2.3 From cfc55bcc1f78395872d41c50f6a3129c4b42289e Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Wed, 20 Jun 2012 14:19:29 +0530 Subject: ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 Extends the maximum number of UART ports to 6 from 4 because AM335X device have six UART ports. Signed-off-by: AnilKumar Ch Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/omap-serial.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index b2eac60b6904..f4a4cd014795 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -52,7 +52,7 @@ #define OMAP_UART_DMA_CH_FREE -1 -#define OMAP_MAX_HSUART_PORTS 4 +#define OMAP_MAX_HSUART_PORTS 6 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA -- cgit v1.2.3