From ee43b5ab850f901217857d06f8e3c6cc5154fa03 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Wed, 29 Jan 2020 18:20:29 -0500 Subject: ARM: qcom_defconfig: add Broadcom bluetooth options Add Broadcom bluetooth options and serial bus in order to support Bluetooth on the Nexus 5 phone. Signed-off-by: Brian Masney Link: https://lore.kernel.org/r/20200129232031.34538-2-masneyb@onstation.org Signed-off-by: Bjorn Andersson --- arch/arm/configs/qcom_defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index cdc75ef7d529..a00765b7225f 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,6 +50,9 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -111,6 +114,7 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -- cgit v1.2.3 From 92c2701ec1f5aa0eef4af44a2ac80c1c9d8aa112 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 15 Jan 2020 09:39:08 +0800 Subject: arm64: defconfig: Select CONFIG_PINCTRL_IMX8MP by default Enable CONFIG_PINCTRL_IMX8MP by default to support i.MX8MP pinctrl driver. Signed-off-by: Anson Huang Reviewed-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0f212889c931..1c744379c9c7 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -409,6 +409,7 @@ CONFIG_PINCTRL_S700=y CONFIG_PINCTRL_S900=y CONFIG_PINCTRL_IMX8MM=y CONFIG_PINCTRL_IMX8MN=y +CONFIG_PINCTRL_IMX8MP=y CONFIG_PINCTRL_IMX8MQ=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IPQ8074=y -- cgit v1.2.3 From 91d14ab8d913e798b3f68663ffc2e1f7dc8c4a8b Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Tue, 11 Feb 2020 08:07:15 +0000 Subject: ARM: configs: at91: enable sama5d4 compatible watchdog Enable CONFIG_SAMA5D4_WATCHDOG. This driver is compatible with sam9x60 watchdog timer block. Signed-off-by: Eugen Hristev Link: https://lore.kernel.org/r/1581408369-14469-3-git-send-email-eugen.hristev@microchip.com Signed-off-by: Alexandre Belloni --- arch/arm/configs/at91_dt_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f66bb98a5cce..4a0ba2ae1a25 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -118,6 +118,7 @@ CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_SAMA5D4_WATCHDOG=y CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y -- cgit v1.2.3 From 33b8cd0065b4a6759dcc025c7f2fbd0a24858e6a Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 12 Dec 2019 18:25:13 +0100 Subject: arm64: defconfig: Enable Qualcomm PM8XXX vibrator support The pm8xxx-vibrator driver controls the vibrator motor driver available in the Qualcomm PM8916 PMIC. Build the driver as module so it can be loaded when necessary. Signed-off-by: Stephan Gerhold Signed-off-by: Bjorn Andersson --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0f212889c931..fca2b43affb7 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -320,6 +320,7 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y +CONFIG_INPUT_PM8XXX_VIBRATOR=m CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y -- cgit v1.2.3 From 8cf1eb848e26deb117e5faa813e718697192a4f9 Mon Sep 17 00:00:00 2001 From: Oleksandr Suvorov Date: Tue, 4 Feb 2020 13:11:49 +0200 Subject: ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ATMEL_MXT Toradex iMX6/iMX7-based modules and boards support LCDs with an MicroChip ATMXT1066T2 touchscreen controller. This patch enables the TOUCHSCREEN_ATMEL_MXT which supports MXT-series controllers, including the ATMXT1066T2. Signed-off-by: Oleksandr Suvorov Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8f216a599735..7cf452ddaa0a 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -179,6 +179,7 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_GOODIX=y -- cgit v1.2.3 From e4ac6b1829d4b1899bb4d61cad5a81f28e9c6308 Mon Sep 17 00:00:00 2001 From: Oleksandr Suvorov Date: Tue, 4 Feb 2020 13:11:50 +0200 Subject: ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879 The Computer on module Colibri iMX7S/iMX7D has an AD7879 touchscreen controller. This patch enables the TOUCHSCREEN_AD7879 and TOUCHSCREEN_AD7879_I2C which support the mentioned controller in i2c mode. Signed-off-by: Oleksandr Suvorov Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7cf452ddaa0a..5a20d12d62bd 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -179,6 +179,8 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_TOUCHSCREEN_AD7879=y +CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_DA9052=y CONFIG_TOUCHSCREEN_EGALAX=y -- cgit v1.2.3 From f87249dd1c9b3bf06c2252419ccf2ee65592b538 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 18 Feb 2020 08:43:06 +0100 Subject: ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size All modules built from exynos_defconfig occupy about 55M, so enable squashfs filesystem support and increase default ram block device size to 32M to enable deploying them on initrd. Such initrd, using squashfs requires at least 24M. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/exynos_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index c8e0c14092e8..65c4daddefe3 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -92,7 +92,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y @@ -320,6 +320,7 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V4=y -- cgit v1.2.3 From 834e34007eb20434620d988489389ad853f1293c Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Thu, 20 Feb 2020 09:56:36 +0000 Subject: ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL The Energy Model (EM) is needed to run Energy Aware Scheduler (EAS). Enable ENERGY_MODEL to make that happen. This will increase energy efficiency of the big.LITTLE platforms (e.g. Exynos5422) by smarter decisions in scheduling tasks in non-heavy workloads. Add SCHED_MC in order to create another level in scheduling domains: 'MC'. This improves scheduler's decisions on platforms with CPU clusters, such as big.LITTLE. Signed-off-by: Lukasz Luba Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/exynos_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 65c4daddefe3..439d37197959 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -8,6 +8,7 @@ CONFIG_PERF_EVENTS=y CONFIG_ARCH_EXYNOS=y CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND=y CONFIG_SMP=y +CONFIG_SCHED_MC=y CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 CONFIG_HIGHMEM=y @@ -17,6 +18,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_ENERGY_MODEL=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -- cgit v1.2.3 From bf9e333ec0d54f7428d9192ad403c3cb523584c7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 17 Feb 2020 11:32:51 +0100 Subject: arm64: defconfig: Enable additional support for Renesas platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - R-Car CAN and CAN-FD controllers, - MSIOF SPI controllers, - ROHM BD9571 GPIO support, - R-Car MIPI CSI-2 receivers, - R-Car Video Input, - Renesas Fine Display Processors, - Renesas Digital Radio Interfaces, - R-Car Gen3 internal HDMI encoders, - Generic LVDS panel support, - Dumb VGA DAC Bridge support, - Thine THC63LVD1024 LVDS decoder bridges, - Synopsys Designware AHB Audio and CEC interfaces, - Renesas USBHS HCD support, - IDT VersaClock 5,6 devices, - Maxim max9611/max9612 ADCs, - ARM TrustZone CryptoCell security processors. All of the above are modular, except for the VC5 clock driver, and the SDR config gatekeepers. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund (VIN, CSI-2) Link: https://lore.kernel.org/r/20200217103251.5205-1-geert+renesas@glider.be --- arch/arm64/configs/defconfig | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 51b8b8555a6e..49053323323f 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -161,6 +161,9 @@ CONFIG_QRTR=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_BPF_JIT=y +CONFIG_CAN=m +CONFIG_CAN_RCAR=m +CONFIG_CAN_RCAR_CANFD=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_HS is not set @@ -399,6 +402,7 @@ CONFIG_SPI_QCOM_QSPI=m CONFIG_SPI_QUP=y CONFIG_SPI_QCOM_GENI=m CONFIG_SPI_S3C64XX=y +CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SUN6I=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y @@ -432,6 +436,7 @@ CONFIG_GPIO_XGENE_SB=y CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_MAX77620=y CONFIG_POWER_AVS=y CONFIG_QCOM_CPR=y @@ -516,19 +521,25 @@ CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_RCAR_CSI2=m +CONFIG_VIDEO_RCAR_VIN=m CONFIG_VIDEO_SUN6I_CSI=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m +CONFIG_VIDEO_RENESAS_FDP1=m CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_SDR_PLATFORM_DRIVERS=y +CONFIG_VIDEO_RCAR_DRIF=m CONFIG_DRM=m CONFIG_DRM_I2C_NXP_TDA998X=m CONFIG_DRM_NOUVEAU=m @@ -546,15 +557,21 @@ CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_RCAR_DU=m +CONFIG_DRM_RCAR_DW_HDMI=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN8I_DW_HDMI=m CONFIG_DRM_SUN8I_MIXER=m CONFIG_DRM_MSM=m CONFIG_DRM_TEGRA=m +CONFIG_DRM_PANEL_LVDS=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_DRM_SII902X=m +CONFIG_DRM_THINE_THC63LVD1024=m CONFIG_DRM_TI_SN65DSI86=m CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_DW_HDMI_AHB_AUDIO=m +CONFIG_DRM_DW_HDMI_CEC=m CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_HISI_HIBMC=m @@ -605,6 +622,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_MUSB_HDRC=y @@ -712,6 +730,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_VC5=y CONFIG_CLK_RASPBERRYPI=m CONFIG_CLK_IMX8MM=y CONFIG_CLK_IMX8MN=y @@ -792,6 +811,7 @@ CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y +CONFIG_MAX9611=m CONFIG_QCOM_SPMI_ADC5=m CONFIG_ROCKCHIP_SARADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m @@ -885,6 +905,7 @@ CONFIG_CRYPTO_DEV_FSL_CAAM=m CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_DEV_QCOM_RNG=m +CONFIG_CRYPTO_DEV_CCREE=m CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -- cgit v1.2.3 From 6d4ff02cf9690b9493153db8b9d50cef143f3bc2 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Thu, 13 Feb 2020 12:06:44 +0800 Subject: arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 Enable the PCIe Gen4 controller driver for Layerscape SoCs. Signed-off-by: Hou Zhiqiang Reviewed-by: Minghuan Lian Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 1c744379c9c7..256345fef287 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -195,6 +195,7 @@ CONFIG_PCI_HOST_THUNDER_ECAM=y CONFIG_PCIE_ROCKCHIP_HOST=m CONFIG_PCIE_BRCMSTB=m CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCIE_LAYERSCAPE_GEN4=y CONFIG_PCI_HISI=y CONFIG_PCIE_QCOM=y CONFIG_PCIE_ARMADA_8K=y -- cgit v1.2.3 From 59986527f55b711048f1c8c3ac3020bbd0c32341 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Sun, 19 Jan 2020 18:43:21 +0530 Subject: arm64: defconfig: Enable qcom ipq6018 clock and pinctrl These configs are required for booting kernel in qcom ipq6018 boards. Reviewed-by: Bjorn Andersson Signed-off-by: Sricharan R Link: https://lore.kernel.org/r/1579439601-14810-6-git-send-email-sricharan@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index fca2b43affb7..a650b87d2d4b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -413,6 +413,7 @@ CONFIG_PINCTRL_IMX8MN=y CONFIG_PINCTRL_IMX8MQ=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y @@ -726,6 +727,7 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_6018=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y -- cgit v1.2.3 From d3a9ad1163a8b71833a023328b9773969edb8392 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 8 Nov 2019 18:42:34 -0800 Subject: arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks Enable the drivers for the display and gpu clock controllers on Qualcomm SDM845, needed in order to get these features working. These drivers provides power-domains and can as such not be compiled as modules. Acked-by: Will Deacon Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20191109024234.1757452-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index a650b87d2d4b..0d8ee75cccb8 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -734,6 +734,8 @@ CONFIG_MSM_MMCC_8996=y CONFIG_MSM_GCC_8998=y CONFIG_QCS_GCC_404=y CONFIG_SDM_GCC_845=y +CONFIG_SDM_GPUCC_845=y +CONFIG_SDM_DISPCC_845=y CONFIG_SM_GCC_8150=y CONFIG_QCOM_HFPLL=y CONFIG_HWSPINLOCK=y -- cgit v1.2.3 From d698e544e2107e3e161ddbb3a28324197ecd537f Mon Sep 17 00:00:00 2001 From: John Garry Date: Mon, 10 Feb 2020 18:40:40 +0800 Subject: arm64: defconfig: Enable MEGARAID_SAS Our new dev board (Huawei D06CS) has a MegaRAID SAS HBA as the storage controller, and we cannot access the HiSilicon SAS HBA, which we normally use; so enable the driver config option so we can boot a distro with the default defconfig. Signed-off-by: John Garry Signed-off-by: Wei Xu --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0f212889c931..3c2dd127d813 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -226,6 +226,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_HISI_SAS=y CONFIG_SCSI_HISI_SAS_PCI=y +CONFIG_MEGARAID_SAS=y CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_UFSHCD=y CONFIG_SCSI_UFSHCD_PLATFORM=y -- cgit v1.2.3 From 182eb908b25030fbba1f585deb2b26fc42b40e81 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 26 Feb 2020 11:57:10 +0100 Subject: ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2 Enable drivers for S5K6A3 and S5C73M3 camera sensors, AAT1290 flash LED, Midas-TouchKey and BRCMFMAC SDIO-WIFI modules used on Samsung Galaxy S3 and Trats2 boards. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/exynos_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 439d37197959..3c3a00fc71f6 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -113,11 +113,13 @@ CONFIG_USB_LAN78XX=m CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_BRCMFMAC=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SAMSUNG=y +CONFIG_KEYBOARD_TM2_TOUCHKEY=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y @@ -206,6 +208,9 @@ CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_S5K6A3=m +CONFIG_VIDEO_S5C73M3=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y @@ -278,6 +283,7 @@ CONFIG_MMC_DW_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y +CONFIG_LEDS_AAT1290=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_MAX77693=y -- cgit v1.2.3 From 5cf9ffe70c2d37ca623589844bfd24cb7a5a3a88 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable ext4 security for setcap Enable ext4 security for setcap. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c32c338f7704..ef5ac91e76b5 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -514,6 +514,7 @@ CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_SECURITY=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y -- cgit v1.2.3 From 93d3ae352bb5cda928570cfa2247d9c529605bef Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 17 Feb 2020 16:55:06 +0100 Subject: ARM: bcm2835_defconfig: add support for Raspberry Pi4 Add drivers needed to boot Raspberry Pi4 board. Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200217155506.5245-1-m.szyprowski@samsung.com Signed-off-by: Nicolas Saenz Julienne --- arch/arm/configs/bcm2835_defconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 519ff58e67b3..38437541ea76 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -72,6 +72,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y +CONFIG_BCMGENET=y CONFIG_USB_LAN78XX=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y @@ -96,9 +97,13 @@ CONFIG_SPI_BCM2835AUX=y CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_THERMAL=y +CONFIG_BCM2711_THERMAL=y CONFIG_BCM2835_THERMAL=y CONFIG_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_MFD_SYSCON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_DRM=y -- cgit v1.2.3 From 3ae09e2608c3bbd619605e35fd3f7b5f547aea3f Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 14 Feb 2020 19:31:11 +0100 Subject: ARM: qcom_defconfig: Enable QRTR This option is useful on msm8974, so enable it. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20200214183111.50919-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson --- arch/arm/configs/qcom_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index a00765b7225f..c882167e1496 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,6 +50,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_BCM=y -- cgit v1.2.3 From 1910ee13a12ce7cab99d97a278ef6083a3cb922a Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Fri, 24 Jan 2020 09:43:49 +0100 Subject: ARM: multi_v7_defconfig: enable drm imx support It will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Christian Gmeiner Signed-off-by: Shawn Guo --- arch/arm/configs/multi_v7_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 017d65f86eba..c5ff91211947 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -640,6 +640,7 @@ CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_CEC=m CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m +CONFIG_IMX_IPUV3_CORE=m CONFIG_DRM=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set @@ -655,6 +656,11 @@ CONFIG_ROCKCHIP_ANALOGIX_DP=y CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y +CONFIG_DRM_IMX=m +CONFIG_DRM_IMX_PARALLEL_DISPLAY=m +CONFIG_DRM_IMX_TVE=m +CONFIG_DRM_IMX_LDB=m +CONFIG_DRM_IMX_HDMI=m CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_LVDS=y -- cgit v1.2.3 From 34e46ed80df6cdeafad3cd344dd28837ba17053e Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sat, 22 Feb 2020 08:08:51 +0800 Subject: arm64: defconfig: add i.MX system controller thermal support This patch enables CONFIG_IMX_SC_THERMAL as module. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 256345fef287..31d098438a43 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -454,6 +454,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_QORIQ_THERMAL=m +CONFIG_IMX_SC_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y -- cgit v1.2.3 From d0a9e63192576d4c898c2b1f49897365f9126be9 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 11 Mar 2020 16:30:39 -0700 Subject: arm64: defconfig: Enable Truly NT35597 WQXGA panel The Truly NT35597 WQXGA panel is found on the Qualcomm SDM845 MTP, enable the driver for it. Reviewed-by: Amit Kucheria Link: https://lore.kernel.org/r/20200311233039.928605-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0d8ee75cccb8..856eb950a1d6 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -554,6 +554,7 @@ CONFIG_DRM_SUN8I_MIXER=m CONFIG_DRM_MSM=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m CONFIG_DRM_SII902X=m CONFIG_DRM_TI_SN65DSI86=m CONFIG_DRM_I2C_ADV7511=m -- cgit v1.2.3 From 742d76ef0e90eea8e6dbed431c274bde17a44ce7 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 25 Feb 2020 01:40:56 +0300 Subject: ARM: multi_v7_defconfig: Enable Tegra cpuidle driver The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and it is now a proper platform driver. Acked-by: Peter De Schrijver Acked-by: Daniel Lezcano Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 017d65f86eba..7c8a1c310bbb 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -113,6 +113,7 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y +CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_TRUSTED_FOUNDATIONS=y -- cgit v1.2.3 From 224c6632050481885368d5b7f3db56254a34c247 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Tue, 25 Feb 2020 01:40:57 +0300 Subject: ARM: tegra: Enable Tegra cpuidle driver in tegra_defconfig The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and it is now a proper platform driver. Acked-by: Peter De Schrijver Acked-by: Daniel Lezcano Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- arch/arm/configs/tegra_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a27592d3b1fa..aa94369bdd0f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -25,6 +25,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y +CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_TRUSTED_FOUNDATIONS=y -- cgit v1.2.3 From 63cccc8401c2d2f4832d17d5277c3b40c838577a Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sat, 29 Feb 2020 11:44:21 +0800 Subject: arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module Enable CONFIG_IMX8MM_THERMAL as module to support i.MX8MM thermal driver. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 31d098438a43..75c46b18365e 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -455,6 +455,7 @@ CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_QORIQ_THERMAL=m CONFIG_IMX_SC_THERMAL=m +CONFIG_IMX8MM_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y -- cgit v1.2.3 From 3fbd82f9af29ed49b66d78fe70956794e1a699ed Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:03 -0500 Subject: arm64: defconfig: run through savedefconfig for ordering Used "make defconfig savedefconfig" to regenerate defconfig files in the right order to prepare for additional defconfig changes. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 75c46b18365e..3a57ef4af107 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -475,9 +475,9 @@ CONFIG_DW_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=m CONFIG_IMX2_WDT=y CONFIG_IMX_SC_WDT=m +CONFIG_QCOM_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m -CONFIG_QCOM_WDT=m CONFIG_RENESAS_WDT=y CONFIG_UNIPHIER_WATCHDOG=y CONFIG_BCM2835_WDT=y @@ -598,8 +598,8 @@ CONFIG_SND_SOC_TAS571X=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m -CONFIG_USB=y CONFIG_USB_CONN_GPIO=m +CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_TEGRA=y @@ -621,7 +621,6 @@ CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y CONFIG_NOP_USB_XCEIV=y -CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m @@ -760,7 +759,6 @@ CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_IMX_SCU_SOC=y CONFIG_QCOM_AOSS_QMP=y -CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_GLINK_SSR=m CONFIG_QCOM_RMTFS_MEM=m @@ -775,14 +773,12 @@ CONFIG_ARCH_R8A774A1=y CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y CONFIG_ARCH_R8A7795=y -CONFIG_ARCH_R8A7796=y CONFIG_ARCH_R8A77961=y CONFIG_ARCH_R8A77965=y CONFIG_ARCH_R8A77970=y CONFIG_ARCH_R8A77980=y CONFIG_ARCH_R8A77990=y CONFIG_ARCH_R8A77995=y -CONFIG_QCOM_PDC=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y @@ -813,6 +809,7 @@ CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m +CONFIG_QCOM_PDC=y CONFIG_RESET_QCOM_AOSS=y CONFIG_RESET_QCOM_PDC=m CONFIG_RESET_TI_SCI=y @@ -884,16 +881,16 @@ CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_DEV_SUN8I_CE=m CONFIG_CRYPTO_DEV_FSL_CAAM=m -CONFIG_CRYPTO_DEV_HISI_ZIP=m -CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_DEV_QCOM_RNG=m +CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set -- cgit v1.2.3 From 60f84e65da591e520124acba96c254e0d5d57173 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:04 -0500 Subject: arm64: defconfig: Enable NXP flexcan driver Enables driver for FLEXCAN device which is used on a wide range of NXP SoCs. Also enabling the related CAN framework. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3a57ef4af107..9c1bd5209edf 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -161,6 +161,8 @@ CONFIG_QRTR=m CONFIG_QRTR_SMD=m CONFIG_QRTR_TUN=m CONFIG_BPF_JIT=y +CONFIG_CAN=m +CONFIG_CAN_FLEXCAN=m CONFIG_BT=m CONFIG_BT_HIDP=m # CONFIG_BT_HS is not set -- cgit v1.2.3 From 4278203fa0389cfb4561c8b74fb1d729ff09a6af Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:05 -0500 Subject: arm64: defconfig: Enable QorIQ DPAA1 drivers Enables drivers for NXP DPAA1 framework and related Ethernet device which can be found on QorIQ SoCs such as LS1043a and LS1046a. They are enabled as built-in to boot from network without an initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 9c1bd5209edf..3e97bb83db3c 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -264,6 +264,8 @@ CONFIG_BNX2X=m CONFIG_MACB=y CONFIG_THUNDER_NIC_PF=y CONFIG_FEC=y +CONFIG_FSL_FMAN=y +CONFIG_FSL_DPAA_ETH=y CONFIG_HIX5HD2_GMAC=y CONFIG_HNS_DSAF=y CONFIG_HNS_ENET=y @@ -759,6 +761,7 @@ CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_FSL_DPAA=y CONFIG_IMX_SCU_SOC=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_GENI_SE=y -- cgit v1.2.3 From 78c2a6873693da7555ed0a7c0809609ea15f8bcf Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:06 -0500 Subject: arm64: defconfig: Enable QorIQ DPAA2 drivers Enables drivers for NXP DPAA2 framework, related Ethernet and crypto device which can be found on QorIQ SoCs like LS1088a, LS2088a and LX2160a. The framework and ethernet drivers are enabled as built-in to boot from network without an initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3e97bb83db3c..4a6dcc33e705 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -210,6 +210,7 @@ CONFIG_FW_LOADER_USER_HELPER=y CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_HISILICON_LPC=y CONFIG_SIMPLE_PM_BUS=y +CONFIG_FSL_MC_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_RAW_NAND=y @@ -266,6 +267,7 @@ CONFIG_THUNDER_NIC_PF=y CONFIG_FEC=y CONFIG_FSL_FMAN=y CONFIG_FSL_DPAA_ETH=y +CONFIG_FSL_DPAA2_ETH=y CONFIG_HIX5HD2_GMAC=y CONFIG_HNS_DSAF=y CONFIG_HNS_ENET=y @@ -762,6 +764,7 @@ CONFIG_RPMSG_QCOM_SMD=y CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_FSL_DPAA=y +CONFIG_FSL_MC_DPIO=y CONFIG_IMX_SCU_SOC=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_GENI_SE=y @@ -889,6 +892,7 @@ CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_DEV_SUN8I_CE=m CONFIG_CRYPTO_DEV_FSL_CAAM=m +CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m CONFIG_CRYPTO_DEV_QCOM_RNG=m CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_CMA_SIZE_MBYTES=32 -- cgit v1.2.3 From 04551bb76ddc35da04dfcb430578fb2974f174da Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:07 -0500 Subject: arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch Enables drivers for NXP ENETC Ethernet controller and FELIX Ethernet switch used on QorIQ LS1028a SoC. The ENETC ethernet drivers are enabled as built-in to boot from network without an initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 4a6dcc33e705..b7303d0897a2 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -154,6 +154,7 @@ CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m CONFIG_BRIDGE=m CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_NET_DSA=m CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y @@ -257,6 +258,7 @@ CONFIG_MACVTAP=m CONFIG_TUN=y CONFIG_VETH=m CONFIG_VIRTIO_NET=y +CONFIG_NET_DSA_MSCC_FELIX=m CONFIG_AMD_XGBE=y CONFIG_NET_XGENE=y CONFIG_ATL1C=m @@ -268,6 +270,8 @@ CONFIG_FEC=y CONFIG_FSL_FMAN=y CONFIG_FSL_DPAA_ETH=y CONFIG_FSL_DPAA2_ETH=y +CONFIG_FSL_ENETC=y +CONFIG_FSL_ENETC_VF=y CONFIG_HIX5HD2_GMAC=y CONFIG_HNS_DSAF=y CONFIG_HNS_ENET=y -- cgit v1.2.3 From dd3372f37ce1c807df0866ad51e52d8a7e2200d1 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:08 -0500 Subject: arm64: defconfig: Enable NXP/FSL SPI controller drivers Enables SPI controller drivers used in various NXP/FSL SoCs. QSPI is fast enough to connect big flash for file system. It is used to connect 512MB NAND flash and 256MB NOR flash on LS1028RDB. It is used as bootsource for other platforms like LS2080ardb too. Enabled as built-in to load RFS from SPI flash without requiring initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index b7303d0897a2..af51ba8fd4e9 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -399,8 +399,11 @@ CONFIG_SPI=y CONFIG_SPI_ARMADA_3700=y CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_FSL_LPSPI=y +CONFIG_SPI_FSL_QUADSPI=y CONFIG_SPI_NXP_FLEXSPI=y CONFIG_SPI_IMX=m +CONFIG_SPI_FSL_DSPI=y CONFIG_SPI_MESON_SPICC=m CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y -- cgit v1.2.3 From 3c77543d9bd7af910dd8e9aa9f6b4ac320b3e4d9 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:09 -0500 Subject: arm64: defconfig: Enable QorIQ cpufreq driver Enables the generic QorIQ cpufreq driver to support frequency scaling for various QorIQ SoCs. Enabled as built-in as it is a core feature. Remove CONFIG_CLK_QORIQ as it is seleted by CONFIG_QORIQ_CPUFREQ. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index af51ba8fd4e9..2739639b26a2 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -90,6 +90,7 @@ CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y CONFIG_ARM_QCOM_CPUFREQ_HW=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=m CONFIG_ARM_TEGRA186_CPUFREQ=y +CONFIG_QORIQ_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_INTEL_STRATIX10_SERVICE=y @@ -726,7 +727,6 @@ CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCPI=y CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y CONFIG_CLK_RASPBERRYPI=m CONFIG_CLK_IMX8MM=y -- cgit v1.2.3 From b3003737cf46bcc9603123841b365e4b9a82b1fe Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:10 -0500 Subject: arm64: defconfig: Enable ARM SBSA watchdog driver Enables ARM generic SBSA compatible watchdog driver for NXP LX2160a SoC. Enabled as built-in for it is a core feature. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 2739639b26a2..c1d0f1c5298c 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -484,6 +484,7 @@ CONFIG_QCOM_SPMI_TEMP_ALARM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_ARM_SBSA_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=m -- cgit v1.2.3 From b2a21fc07f500fad1baa569a3c178ba36c21e3d6 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:11 -0500 Subject: arm64: defconfig: Enable QorIQ IFC NAND controller driver Enables NXP/FSL QorIQ IFC flash controller driver for NAND. Enabled as built-in to load RFS from nand flash without initramfs. Remove CONFIG_MEMORY as it is selected by CONFIG_MTD_NAND_FSL_IFC. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c1d0f1c5298c..f31267c1ba32 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -218,6 +218,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_MARVELL=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_CADENCE_QUADSPI=y @@ -805,7 +806,6 @@ CONFIG_ARCH_K3_J721E_SOC=y CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y -CONFIG_MEMORY=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_QCOM_SPMI_ADC5=m -- cgit v1.2.3 From b0b46d63b7fa74ef759b09b43fa9efb7d2715641 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:12 -0500 Subject: arm64: defconfig: Enable QorIQ GPIO driver Enables generic GPIO driver for varous QorIQ SoCs. The driver can only be built-in right now. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index f31267c1ba32..128fe2f10947 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -441,6 +441,7 @@ CONFIG_PINCTRL_SM8150=y CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y +CONFIG_GPIO_MPC8XXX=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y -- cgit v1.2.3 From 83ed859a413ebbf06768c3f5ed62af547312b942 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:13 -0500 Subject: arm64: defconfig: Enable ARM Mali display driver Enables the Mali display driver for the display port on NXP LS1028a SoC. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 128fe2f10947..3dd57dc472cb 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -552,6 +552,7 @@ CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_DRM=m CONFIG_DRM_I2C_NXP_TDA998X=m +CONFIG_DRM_MALI_DISPLAY=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS5433_DECON=y -- cgit v1.2.3 From ce693fc2a877e790c095a003eae42ce8c76bf77a Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:14 -0500 Subject: arm64: defconfig: Enable flash device drivers for QorIQ boards Enable the flash devices used on NXP/FSL QorIQ reference boards supported in mainline kernel. Drivers are enabled as built-in for RFS access without initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3dd57dc472cb..4662ee641748 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -215,6 +215,15 @@ CONFIG_SIMPLE_PM_BUS=y CONFIG_FSL_MC_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_SST25L=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_MARVELL=y @@ -227,6 +236,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_NVME=m CONFIG_SRAM=y +CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT25=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -- cgit v1.2.3 From 95f33dfb21da330a6ce9edc21dcbf3aaee094631 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:15 -0500 Subject: arm64: defconfig: Enable RTC devices for QorIQ boards Enables the RTC devices used on QorIQ reference boards supported in mainline kernel. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 4662ee641748..10c76d852a0d 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -696,11 +696,14 @@ CONFIG_LEDS_TRIGGER_PANIC=y CONFIG_EDAC=y CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m +CONFIG_RTC_DRV_PCF85363=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_PCF2127=m CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_S3C=y -- cgit v1.2.3 From 97c1ed02f765bc89d70dfec364dab152621be969 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:16 -0500 Subject: arm64: defconfig: Enable PHY devices used on QorIQ boards Enables various PHY device drivers and PHY MUX drivers used on QorIQ reference boards supported in mainline kernel. Enabled as built-in to boot from network without an initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 10c76d852a0d..a0babe16fc3b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -307,13 +307,17 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y +CONFIG_AQUANTIA_PHY=y CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m CONFIG_MICREL_PHY=y +CONFIG_MICROSEMI_PHY=y CONFIG_AT803X_PHY=y CONFIG_REALTEK_PHY=m CONFIG_ROCKCHIP_PHY=y +CONFIG_VITESSE_PHY=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m @@ -884,6 +888,7 @@ CONFIG_FPGA_REGION=m CONFIG_OF_FPGA_REGION=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_MUX_MMIO=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y -- cgit v1.2.3 From 61097b57dd079b5ba7b41127d2045198003f9da4 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 11 Mar 2020 17:53:17 -0500 Subject: arm64: defconfig: Enable e1000 device Enables e1000 Ethernet device as it is used as a low-cost failover Ethernet port on various QorIQ reference boards. Enabled as built-in for booting from network without initramfs. Signed-off-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index a0babe16fc3b..0c110182497a 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -290,6 +290,7 @@ CONFIG_HNS_ENET=y CONFIG_HNS3=y CONFIG_HNS3_HCLGE=y CONFIG_HNS3_ENET=y +CONFIG_E1000=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y -- cgit v1.2.3 From 1788e7a932076205d0e43024f457dd0a05ded592 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Sat, 14 Mar 2020 22:08:27 -0700 Subject: arm64: defconfig: Enable Qualcomm SDM845 audio configs Enable soundwire, slimbus frameworks, the machine driver and the codec drivers for WCD934x and WSA881x used on varios SDM845 based designs. Tested-by: Vinod Koul Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200315050827.1575421-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/configs/defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 856eb950a1d6..d74d237498d8 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -429,6 +429,7 @@ CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y +CONFIG_GPIO_WCD934X=m CONFIG_GPIO_XGENE=y CONFIG_GPIO_XGENE_SB=y CONFIG_GPIO_MAX732X=y @@ -491,6 +492,7 @@ CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_ROHM_BD718XX=y +CONFIG_MFD_WCD934X=m CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BD718XX=y @@ -582,6 +584,7 @@ CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_SOC=y CONFIG_SND_BCM2835_SOC_I2S=m CONFIG_SND_MESON_AXG_SOUND_CARD=m +CONFIG_SND_SOC_SDM845=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m @@ -594,6 +597,8 @@ CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m CONFIG_SND_SOC_PCM3168A_I2C=m CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SOC_WCD934X=m +CONFIG_SND_SOC_WSA881X=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m @@ -758,6 +763,8 @@ CONFIG_QCOM_SYSMON=m CONFIG_RPMSG_QCOM_GLINK_RPM=y CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y +CONFIG_SOUNDWIRE=m +CONFIG_SOUNDWIRE_QCOM=m CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_IMX_SCU_SOC=y @@ -773,6 +780,7 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_QCOM_SOCINFO=m +CONFIG_QCOM_APR=m CONFIG_ARCH_R8A774A1=y CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y @@ -858,6 +866,9 @@ CONFIG_FPGA_REGION=m CONFIG_OF_FPGA_REGION=m CONFIG_TEE=y CONFIG_OPTEE=y +CONFIG_SLIMBUS=m +CONFIG_SLIM_QCOM_CTRL=m +CONFIG_SLIM_QCOM_NGD_CTRL=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y -- cgit v1.2.3 From cb63cfb4cbd46dc8311607fe2962df7ed0fe27af Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable simple-pm-bus We can use simple-pm-bus instead of simple-bus, let's enable it to allow configuring it in dts files for using things like genpd. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ef5ac91e76b5..18fcd9a68358 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -130,6 +130,7 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -- cgit v1.2.3 From 5c824e8be64d5cda40c13133b8e4b086194e04b6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable zram as loadable modules Enable zram as loadable modules. This allows mounting some part of memory as swap on low memory devices. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 18fcd9a68358..65b2dcc19716 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -78,6 +78,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_CMA=y +CONFIG_ZSMALLOC=m +CONFIG_PGTABLE_MAPPING=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -150,6 +152,8 @@ CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=y +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -- cgit v1.2.3 From 4d5c6e13567478de47b546a5f1151c4d68d765e5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules Enable more droid4 devices as loadable modules: - We have an isl29028 proximity sensor - Battery has an EEPROM that can be read with w1_ds250x Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 65b2dcc19716..43f378cd5d87 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -283,6 +283,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m +CONFIG_W1_SLAVE_DS250X=m CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y @@ -504,6 +505,7 @@ CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_CPCAP_ADC=m CONFIG_TI_AM335X_ADC=m +CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m CONFIG_PWM=y CONFIG_PWM_OMAP_DMTIMER=m -- cgit v1.2.3 From eaaa2440b1fd4ce7efbd667c67b36501139d309e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules The McPDM module is only usable on hardware where it's module clock is wired to the PMIC. Let's enable the optional PMIC module clocks for this so boards can use McPDM. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 43f378cd5d87..40df5ec730f1 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -488,6 +488,8 @@ CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y +CONFIG_CLK_TWL6040=m +CONFIG_COMMON_CLK_PALMAS=m CONFIG_OMAP_IOMMU=y CONFIG_REMOTEPROC=y CONFIG_OMAP_REMOTEPROC=m -- cgit v1.2.3 From e15b815ed21f0f8016bf91ded957e89fb09146bf Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 14 Mar 2020 14:25:37 -0700 Subject: ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module Some devices have ina2xx_adc on i2c for measuring power consumption and can nowadays just read the output via IIO. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 40df5ec730f1..3774360dfd3f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -506,6 +506,7 @@ CONFIG_IIO_SW_DEVICE=m CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_CPCAP_ADC=m +CONFIG_INA2XX_ADC=m CONFIG_TI_AM335X_ADC=m CONFIG_SENSORS_ISL29028=m CONFIG_BMP280=m -- cgit v1.2.3 From 98c2cc359f8fa67992eb715f89f19390d70e135d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Mar 2020 10:41:07 -0800 Subject: ARM: omap2plus_defconfig: Update for moved and dropped options Looks like CONFIG_MTD_M25P80 no longer exists and the others just move around the existing options. This makes it easier to create patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3774360dfd3f..5a4134a71189 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -142,7 +142,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=m CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -191,10 +190,10 @@ CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_AT803X_PHY=y CONFIG_DP83848_PHY=y CONFIG_DP83867_PHY=y CONFIG_MICREL_PHY=y +CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -363,13 +362,13 @@ CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m -CONFIG_DRM_TI_TFP410=m CONFIG_DRM_PANEL_LG_LB035Q02=m CONFIG_DRM_PANEL_NEC_NL8048HL11=m CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m CONFIG_DRM_PANEL_SONY_ACX565AKM=m CONFIG_DRM_PANEL_TPO_TD028TTEC1=m CONFIG_DRM_PANEL_TPO_TD043MTEA1=m +CONFIG_DRM_TI_TFP410=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -563,10 +562,10 @@ CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set -- cgit v1.2.3