From 613e09b46a86d454fb53f7e9eac5e240f1e3bacf Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 30 Dec 2008 16:24:17 +0000 Subject: [ARM] footbridge: set dc21285 clock rate from command line Allow the footbridge clock rate to be specified on the kernel command line. This allows us to work-around broken Personal Server firmware. Signed-off-by: Russell King --- arch/arm/mach-footbridge/common.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 36ff06d4df15..26e444a3cffd 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -34,6 +34,13 @@ unsigned int mem_fclk_21285 = 50000000; EXPORT_SYMBOL(mem_fclk_21285); +static void __init early_fclk(char **arg) +{ + mem_fclk_21285 = simple_strtoul(*arg, arg, 0); +} + +__early_param("mem_fclk_21285=", early_fclk); + static int __init parse_tag_memclk(const struct tag *tag) { mem_fclk_21285 = tag->u.memclk.fmemclk; -- cgit v1.2.3 From e1c4a2d7b381f8f6212888a15a69f8fce8d0a08f Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Tue, 30 Dec 2008 23:22:41 +0000 Subject: [ARM] pxa: add e750 MFP config Adds MFP configuration for supported e750 hardware. Signed-off-by: Ian Molton --- arch/arm/mach-pxa/e750.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 84d7c1aac58d..7ad76539c841 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -105,6 +105,57 @@ static struct platform_device e750_fb_device = { .resource = e750_fb_resources, }; +/* -------------------- e750 MFP parameters -------------------- */ + +static unsigned long e750_pin_config[] __initdata = { + /* Chip selects */ + GPIO15_nCS_1, /* CS1 - Flash */ + GPIO79_nCS_3, /* CS3 - IMAGEON */ + GPIO80_nCS_4, /* CS4 - TMIO */ + + /* Clocks */ + GPIO11_3_6MHz, + + /* BTUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO44_BTUART_CTS, + + /* TMIO controller */ + GPIO19_GPIO, /* t7l66xb #PCLR */ + GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ + + /* UDC */ + GPIO13_GPIO, + GPIO3_GPIO, + + /* IrDA */ + GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + + /* PC Card */ + GPIO8_GPIO, /* CD0 */ + GPIO44_GPIO, /* CD1 */ + GPIO11_GPIO, /* IRQ0 */ + GPIO6_GPIO, /* IRQ1 */ + GPIO27_GPIO, /* RST0 */ + GPIO24_GPIO, /* RST1 */ + GPIO20_GPIO, /* PWR0 */ + GPIO23_GPIO, /* PWR1 */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO52_nPCE_1, + GPIO53_nPCE_2, + GPIO54_nPSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + + /* wakeup */ + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, +}; + /* ----------------- e750 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e750_tc6393xb_info = { @@ -137,6 +188,7 @@ static struct platform_device *devices[] __initdata = { static void __init e750_init(void) { + pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); -- cgit v1.2.3