From 557fe99d9d490fe01c7aa87494313078c4ff939c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 24 Jan 2014 08:54:16 +0100 Subject: pwm: Remove obsolete HAVE_PWM Kconfig symbol Before we had the PWM framework we used to have a barebone PWM api. The HAVE_PWM Kconfig symbol used to be selected by the PWM drivers to specify the PWM API is present in the kernel. Since the last legacy driver is gone the HAVE_PWM symbol can go aswell. Signed-off-by: Sascha Hauer Cc: Dmitry Torokhov Cc: Eric Miao Cc: Haojian Zhuang Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Thierry Reding Cc: linux-pwm@vger.kernel.orig Cc: Russell King Cc: Ralf Baechle Signed-off-by: Thierry Reding --- arch/arm/Kconfig | 4 ---- arch/arm/mach-pxa/Kconfig | 15 --------------- arch/mips/Kconfig | 1 - 3 files changed, 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e25419817791..cc6ce44064a2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -113,9 +113,6 @@ config ARM_DMA_IOMMU_ALIGNMENT endif -config HAVE_PWM - bool - config MIGHT_HAVE_PCI bool @@ -632,7 +629,6 @@ config ARCH_LPC32XX select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_IDE - select HAVE_PWM select USB_ARCH_HAS_OHCI select USE_OF help diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96100dbf5a2e..b96244c73ea4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -7,7 +7,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT bool "Support PXA3xx platforms from device tree" select CPU_PXA300 - select HAVE_PWM select POWER_SUPPLY select PXA3xx select USE_OF @@ -23,12 +22,10 @@ config ARCH_LUBBOCK config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" - select HAVE_PWM select PXA27x config MACH_ZYLONITE bool - select HAVE_PWM select PXA3xx config MACH_ZYLONITE300 @@ -69,7 +66,6 @@ config ARCH_PXA_IDP config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select ARCOM_PCMCIA - select HAVE_PWM select I2C_GPIO select ISA select PXA25x @@ -120,7 +116,6 @@ config MACH_CM_X300 bool "CompuLab CM-X300 modules" select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM select PXA3xx config MACH_CAPC7117 @@ -211,7 +206,6 @@ config TRIZEPS_PCMCIA config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" - select HAVE_PWM select PXA27x config MACH_PCM027 @@ -222,7 +216,6 @@ config MACH_PCM027 config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" depends on MACH_PCM027 - select HAVE_PWM choice prompt "display on pcm990" @@ -246,7 +239,6 @@ config MACH_COLIBRI config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" depends on MACH_COLIBRI - select HAVE_PWM select PXA27x config MACH_COLIBRI300 @@ -275,7 +267,6 @@ comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" - select HAVE_PWM select IWMMXT select PXA27x @@ -289,14 +280,12 @@ config MACH_HIMALAYA config MACH_MAGICIAN bool "Enable HTC Magician Support" - select HAVE_PWM select IWMMXT select PXA27x config MACH_MIOA701 bool "Mitac Mio A701 Support" select GPIO_SYSFS - select HAVE_PWM select IWMMXT select PXA27x help @@ -306,7 +295,6 @@ config MACH_MIOA701 config PXA_EZX bool "Motorola EZX Platform" - select HAVE_PWM select IWMMXT select PXA27x @@ -346,7 +334,6 @@ config MACH_MP900C config ARCH_PXA_PALM bool "PXA based Palm PDAs" - select HAVE_PWM config MACH_PALM27X bool @@ -444,7 +431,6 @@ config MACH_TREO680 config MACH_RAUMFELD_RC bool "Raumfeld Controller" select CPU_PXA300 - select HAVE_PWM select POWER_SUPPLY select PXA3xx @@ -608,7 +594,6 @@ config MACH_E800 config MACH_ZIPIT2 bool "Zipit Z2 Handheld" - select HAVE_PWM select PXA27x endmenu diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index dcae3a7035db..d1326032c8c8 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -235,7 +235,6 @@ config MACH_JZ4740 select IRQ_CPU select ARCH_REQUIRE_GPIOLIB select SYS_HAS_EARLY_PRINTK - select HAVE_PWM select HAVE_CLK select GENERIC_IRQ_CHIP -- cgit v1.2.3