From 7eb3894b2fac978f811684e3ccb3cb0ad7820bef Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Thu, 10 Oct 2019 16:33:34 +0800 Subject: arm64: dts: ls1028a: fix a compatible issue The I2C multiplexer used on ls1028aqds is PCA9547, not PCA9847. If the wrong compatible was used, this chip will not be able to be probed correctly and hence fail to work. Signed-off-by: Yuantian Tang Acked-by: Li Yang Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index d98346da01df..078a5010228c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -127,7 +127,7 @@ status = "okay"; i2c-mux@77 { - compatible = "nxp,pca9847"; + compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 7e5d0bf6afcc7bd72f78e7f33570e2e0945624f0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Oct 2019 17:43:43 -0300 Subject: ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts Since commit a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors") a storm of accelerometer interrupts is seen: [ 114.211283] irq 260: nobody cared (try booting with the "irqpoll" option) [ 114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1 [ 114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 114.230531] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 114.238301] [] (show_stack) from [] (dump_stack+0xd8/0x110) [ 114.245644] [] (dump_stack) from [] (__report_bad_irq+0x30/0xc0) [ 114.253417] [] (__report_bad_irq) from [] (note_interrupt+0x108/0x298) [ 114.261707] [] (note_interrupt) from [] (handle_irq_event_percpu+0x70/0x80) [ 114.270433] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 114.279326] [] (handle_irq_event) from [] (handle_level_irq+0xc8/0x154) [ 114.287701] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x34) [ 114.296166] [] (generic_handle_irq) from [] (mxc_gpio_irq_handler+0x30/0xf0) [ 114.304975] [] (mxc_gpio_irq_handler) from [] (mx3_gpio_irq_handler+0x60/0xb0) [ 114.313955] [] (mx3_gpio_irq_handler) from [] (generic_handle_irq+0x20/0x34) [ 114.322762] [] (generic_handle_irq) from [] (__handle_domain_irq+0x64/0xe0) [ 114.331485] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0xa8) [ 114.339862] [] (gic_handle_irq) from [] (__irq_svc+0x70/0x98) [ 114.347361] Exception stack(0xc1301ec0 to 0xc1301f08) [ 114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8 [ 114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4 [ 114.368830] 1f00: 20000013 ffffffff [ 114.372349] [] (__irq_svc) from [] (cpuidle_enter_state+0x168/0x5f4) [ 114.380464] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x28/0x38) [ 114.388751] [] (cpuidle_enter) from [] (do_idle+0x224/0x2a8) [ 114.396168] [] (do_idle) from [] (cpu_startup_entry+0x18/0x20) [ 114.403765] [] (cpu_startup_entry) from [] (start_kernel+0x43c/0x500) [ 114.411958] handlers: [ 114.414302] [] irq_default_primary_handler threaded [] mma8452_interrupt [ 114.422974] Disabling IRQ #260 CPU0 CPU1 .... 260: 100001 0 gpio-mxc 31 Level mma8451 The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin needs to activate its pull up, otherwise it will stay always at low level generating multiple interrupts. The current device tree does not configure the IOMUX for this pin, so it uses whathever comes configured from the bootloader. The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from the bootloader, which has PKE bit cleared, hence disabling the pull-up. Instead of relying on a previous configuration from the bootloader, configure the GPIO6_IO31 pin with pull-up enabled in order to fix this problem. Fixes: a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors") Signed-off-by: Fabio Estevam Reviewed-By: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index f3404dd10537..cf628465cd0a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -230,6 +230,8 @@ accelerometer@1c { compatible = "fsl,mma8451"; reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma8451_int>; interrupt-parent = <&gpio6>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; }; @@ -628,6 +630,12 @@ >; }; + pinctrl_mma8451_int: mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 -- cgit v1.2.3 From cabe5f85e63626c00f3b879a670ec27325056a2d Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 16 Oct 2019 09:40:05 -0500 Subject: ARM: dts: imx6-logicpd: Re-enable SNVS power key The baseboard of the Logic PD i.MX6 development kit has a power button routed which can both power down and power up the board. It can also wake the board from sleep. This functionality was marked as disabled by default in imx6qdl.dtsi, so it needs to be explicitly enabled for each board. This patch enables the snvs power key again. Signed-off-by: Adam Ford Fixes: 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design") Cc: stable #5.3+ Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 2a6ce87071f9..9e027b9a5f91 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -328,6 +328,10 @@ pinctrl-0 = <&pinctrl_pwm3>; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; -- cgit v1.2.3 From e346ff93f02b1ba81e976d4e67ec56582dbdf7f1 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 25 Oct 2019 16:39:23 +0800 Subject: arm64: dts: imx8mm: fix compatible string for sdma SDMA in i.MX8MM should use same configuration as i.MX8MQ So need to change compatible string to be "fsl,imx8mq-sdma". Fixes: a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support") Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 58b8cd06cae7..23c8fad7932b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -394,7 +394,7 @@ }; sdma2: dma-controller@302c0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x302c0000 0x10000>; interrupts = ; clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, @@ -405,7 +405,7 @@ }; sdma3: dma-controller@302b0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x302b0000 0x10000>; interrupts = ; clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, @@ -737,7 +737,7 @@ }; sdma1: dma-controller@30bd0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, -- cgit v1.2.3 From 958c6014c64ef51e5f647d2de527c53e773c8a84 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 25 Oct 2019 16:40:07 +0800 Subject: arm64: dts: imx8mn: fix compatible string for sdma SDMA in i.MX8MN should use same configuration as i.MX8MQ So need to change compatible string to be "fsl,imx8mq-sdma". Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support") Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 98496f570720..43c4db312146 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -288,7 +288,7 @@ }; sdma3: dma-controller@302b0000 { - compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; reg = <0x302b0000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, @@ -299,7 +299,7 @@ }; sdma2: dma-controller@302c0000 { - compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; reg = <0x302c0000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, @@ -612,7 +612,7 @@ }; sdma1: dma-controller@30bd0000 { - compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, -- cgit v1.2.3