From 69cbbf6be5d5c25deeddd9450ae538e769480dc3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 12 Mar 2021 08:37:46 -0300 Subject: ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently The imx6ul-evk board designer took the bad decision to tie the two Ethernet PHY reset lines together. This prevents one Ethernet interface to work while the other one is brought down. For example: # ifconfig eth0 down # [ 279.386551] fec 2188000.ethernet eth1: Link is Down Bringing eth0 interface down also causes eth1 to be down. The Ethernet reset lines comes from the IO expander and both come in logic level 0 by default. To fix this issue, remove the Ethernet PHY reset descriptions from its respective PHY nodes and force both Ethernet PHY lines to be at logic level 1 via gpio-hog. Fixes: 2db7e78bf02b ("ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset") Reported-by: Joakim Zhang Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c593597b2119..5a1e10def6ef 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -210,9 +210,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; @@ -222,9 +219,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; }; }; @@ -243,6 +237,22 @@ status = "okay"; }; +&gpio_spi { + eth0-phy-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth0-phy"; + }; + + eth1-phy-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth1-phy"; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; -- cgit v1.2.3