From 99bd5fcc505d65ea9c60619202f0b2d926eabbe9 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 21 Mar 2019 17:19:37 -0700 Subject: ARC: PAE40: don't panic and instead turn off hw ioc HSDK currently panics when built for HIGHMEM/ARC_HAS_PAE40 because ioc is enabled with default which doesn't work for the 2 non contiguous memory nodes. So get PAE working by disabling ioc instead. Tested with !PAE40 by forcing @ioc_enable=0 and running the glibc testsuite over ssh Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 4135abec3fb0..63e6e6504699 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -113,10 +113,24 @@ static void read_decode_cache_bcr_arcv2(int cpu) } READ_BCR(ARC_REG_CLUSTER_BCR, cbcr); - if (cbcr.c) + if (cbcr.c) { ioc_exists = 1; - else + + /* + * As for today we don't support both IOC and ZONE_HIGHMEM enabled + * simultaneously. This happens because as of today IOC aperture covers + * only ZONE_NORMAL (low mem) and any dma transactions outside this + * region won't be HW coherent. + * If we want to use both IOC and ZONE_HIGHMEM we can use + * bounce_buffer to handle dma transactions to HIGHMEM. + * Also it is possible to modify dma_direct cache ops or increase IOC + * aperture size if we are planning to use HIGHMEM without PAE. + */ + if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled()) + ioc_enable = 0; + } else { ioc_enable = 0; + } /* HS 2.0 didn't have AUX_VOL */ if (cpuinfo_arc700[cpu].core.family > 0x51) { @@ -1158,19 +1172,6 @@ noinline void __init arc_ioc_setup(void) if (!ioc_enable) return; - /* - * As for today we don't support both IOC and ZONE_HIGHMEM enabled - * simultaneously. This happens because as of today IOC aperture covers - * only ZONE_NORMAL (low mem) and any dma transactions outside this - * region won't be HW coherent. - * If we want to use both IOC and ZONE_HIGHMEM we can use - * bounce_buffer to handle dma transactions to HIGHMEM. - * Also it is possible to modify dma_direct cache ops or increase IOC - * aperture size if we are planning to use HIGHMEM without PAE. - */ - if (IS_ENABLED(CONFIG_HIGHMEM)) - panic("IOC and HIGHMEM can't be used simultaneously"); - /* Flush + invalidate + disable L1 dcache */ __dc_disable(); -- cgit v1.2.3 From 21cee1bd1594b2af6798ddffa97555b4bc3586e1 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 2 Apr 2019 12:10:44 -0700 Subject: ARC: [hsdk] Make it easier to add PAE40 region to DTB 1. Bump top level address-cells/size-cells nodes to 2 (to ensure all down stream addresses are 64-bits, unless explicitly specified otherwise (in "soc" bus with all peripherals) 2. "memory" also specified with address/size 2 3. Add a commented reference for PAE40 region beyond 4GB physical address space Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/hsdk.dts | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 69bc1c9e8e50..7425bb0f2d1b 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -18,8 +18,8 @@ model = "snps,hsdk"; compatible = "snps,hsdk"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; @@ -105,7 +105,7 @@ #size-cells = <1>; interrupt-parent = <&idu_intc>; - ranges = <0x00000000 0xf0000000 0x10000000>; + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; cgu_rst: reset-controller@8a0 { compatible = "snps,hsdk-reset"; @@ -269,9 +269,10 @@ }; memory@80000000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GiB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ }; }; -- cgit v1.2.3 From 55c0c4c793b538fb438bcc72481b9dc2f79fe5a9 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Mon, 8 Apr 2019 16:04:38 +0300 Subject: ARC: memset: fix build with L1_CACHE_SHIFT != 6 In case of 'L1_CACHE_SHIFT != 6' we define dummy assembly macroses PREALLOC_INSTR and PREFETCHW_INSTR without arguments. However we pass arguments to them in code which cause build errors. Fix that. Signed-off-by: Eugeniy Paltsev Cc: [5.0] Signed-off-by: Vineet Gupta --- arch/arc/lib/memset-archs.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S index f230bb7092fd..b3373f5c88e0 100644 --- a/arch/arc/lib/memset-archs.S +++ b/arch/arc/lib/memset-archs.S @@ -30,10 +30,10 @@ #else -.macro PREALLOC_INSTR +.macro PREALLOC_INSTR reg, off .endm -.macro PREFETCHW_INSTR +.macro PREFETCHW_INSTR reg, off .endm #endif -- cgit v1.2.3