From 62666828bae7057835d982367e98716a1bd0fd40 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 6 Oct 2008 21:08:39 +0400 Subject: powerpc/83xx: don't probe broken PCI on mpc837x_mds boards In the standalone setup the board's CPLD disables the PCI internal arbiter, thus any access to the PCI bus will hang the board. The common way to disable particular devices in the device tree is to put the "status" property with any value other than "ok" or "okay" into the device node we want to disable. So, when there is no PCI arbiter on the bus the u-boot adds status = "broken (no arbiter)" property into the PCI controller's node, and so marks the PCI controller as unavailable. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc837x_mds.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index be62de23bead..8bb13c807142 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void) ppc_md.progress("mpc837x_mds_setup_arch()", 0); #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") { + if (!of_device_is_available(np)) { + pr_warning("%s: disabled by the firmware.\n", + np->full_name); + continue; + } mpc83xx_add_bridge(np); + } #endif mpc837xmds_usb_cfg(); } -- cgit v1.2.3