From b4b6fb8de8dcb756c78ef7203cb9d00a42185e26 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 29 Jun 2020 15:00:54 +0300 Subject: arm64: dts: zynqmp: Add GTR transceivers Add a DT node for the PS-GTR transceivers. Signed-off-by: Laurent Pinchart Acked-by: Michal Simek Link: https://lore.kernel.org/r/20200629120054.29338-4-laurent.pinchart@ideasonboard.com --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 9174ddc76bdc..a0aad47b0ffc 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -13,6 +13,7 @@ */ #include +#include / { compatible = "xlnx,zynqmp"; @@ -558,6 +559,15 @@ }; }; + psgtr: phy@fd400000 { + compatible = "xlnx,zynqmp-psgtr-v1.1"; + status = "disabled"; + reg = <0x0 0xfd400000 0x0 0x40000>, + <0x0 0xfd3d0000 0x0 0x1000>; + reg-names = "serdes", "siou"; + #phy-cells = <4>; + }; + rtc: rtc@ffa60000 { compatible = "xlnx,zynqmp-rtc"; status = "disabled"; -- cgit v1.2.3 From 8d53ecfbf23135381d2ebbd1b261a7c7f18a7294 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 10:17:44 +0200 Subject: arm64: dts: xilinx: Align IOMMU nodename with dtschema Fix dtschema validator warnings like: smmu@fd800000: $nodename:0: 'smmu@fd800000' does not match '^iommu@[0-9a-f]*' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index a0aad47b0ffc..3ec99f13c259 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -611,7 +611,7 @@ power-domains = <&zynqmp_firmware PD_SD_1>; }; - smmu: smmu@fd800000 { + smmu: iommu@fd800000 { compatible = "arm,mmu-500"; reg = <0x0 0xfd800000 0x0 0x20000>; status = "disabled"; -- cgit v1.2.3 From a58cfdba2039ff2d5758840e97a23a2dedecf1e8 Mon Sep 17 00:00:00 2001 From: Jing Xiangfeng Date: Fri, 24 Jul 2020 11:54:30 +0800 Subject: ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() The of_clk_get() function returns error pointers, it never returns NULL. Fixes: 4ea3711aece4 ("ARM: OMAP2+: omap-iommu.c conversion to ti-sysc") Signed-off-by: Jing Xiangfeng Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 54aff33e55e6..bfa5e1b8dba7 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev) return pwrdm; clk = of_clk_get(dev->of_node->parent, 0); - if (!clk) { + if (IS_ERR(clk)) { dev_err(dev, "no fck found\n"); return NULL; } -- cgit v1.2.3 From d7dfee67688ac7f2dfd4c3bc70c053ee990c40b5 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 8 Aug 2020 21:56:10 -0500 Subject: ARM: dts: logicpd-torpedo-baseboard: Fix broken audio Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree, they were never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 739f85bba5ab ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 381f0e82bb70..b0f6613e6d54 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -81,6 +81,8 @@ }; &mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; status = "okay"; }; -- cgit v1.2.3 From 4d26e9a028e3d88223e06fa133c3d55af7ddbceb Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 14 Aug 2020 07:53:38 -0500 Subject: ARM: dts: logicpd-som-lv-baseboard: Fix broken audio Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree but never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 100396f6c2fe..c310c33ca6f3 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -51,6 +51,8 @@ &mcbsp2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; }; &charger { -- cgit v1.2.3 From d1db7b80a6c8c5f81db0e80664d29b374750e2c6 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 14 Aug 2020 07:24:41 -0500 Subject: ARM: dts: logicpd-som-lv-baseboard: Fix missing video A previous commit removed the panel-dpi driver, which made the SOM-LV video stop working because it relied on the DPI driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the SOM-LV dev kits to use a similar panel and remove the manual timing requirements. A similar patch was already done and applied to the Torpedo family. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi | 27 +++++-------------------- 1 file changed, 5 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index c310c33ca6f3..395e05f10d36 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -104,35 +104,18 @@ regulator-max-microvolt = <3300000>; }; - lcd0: display@0 { - compatible = "panel-dpi"; - label = "28"; - status = "okay"; - /* default-on; */ + lcd0: display { + /* This isn't the exact LCD, but the timings meet spec */ + compatible = "logicpd,type28"; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_pin>; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; }; bl: backlight { -- cgit v1.2.3 From 0ff5a4812be4ebd4782bbb555d369636eea164f7 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 31 Jul 2020 10:26:40 -0500 Subject: ARM: dts: socfpga: fix register entry for timer3 on Arria10 Fixes the register address for the timer3 entry on Arria10. Fixes: 475dc86d08de4 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index fc4abef143a0..0013ec3463c4 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -821,7 +821,7 @@ timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xffd01000 0x100>; + reg = <0xffd00100 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; resets = <&rst L4SYSTIMER1_RESET>; -- cgit v1.2.3 From 6542e2b613c2b1952e83973dc434831332ce8e27 Mon Sep 17 00:00:00 2001 From: David Shah Date: Tue, 18 Aug 2020 10:51:00 +0100 Subject: ARM: dts: omap5: Fix DSI base address and clocks DSI was not probing due to base address off by 0x1000, and sys_clk missing. With this patch, the Pyra display works if HDMI is disabled in the device tree. Fixes: 5a507162f096 ("ARM: dts: Configure interconnect target module for omap5 dsi1") Signed-off-by: David Shah Tested-by: H. Nikolaus Schaller [tony@atomide.com: standardized subject line, added fixes tag] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5da9cff7a53c..a82c96258a93 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -488,11 +488,11 @@ }; }; - target-module@5000 { + target-module@4000 { compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x5000 0x4>, - <0x5010 0x4>, - <0x5014 0x4>; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; reg-names = "rev", "sysc", "syss"; ti,sysc-sidle = , , @@ -504,7 +504,7 @@ ti,syss-mask = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x5000 0x1000>; + ranges = <0 0x4000 0x1000>; dsi1: encoder@0 { compatible = "ti,omap5-dsi"; @@ -514,8 +514,9 @@ reg-names = "proto", "phy", "pll"; interrupts = ; status = "disabled"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; }; }; @@ -545,8 +546,9 @@ reg-names = "proto", "phy", "pll"; interrupts = ; status = "disabled"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; }; }; -- cgit v1.2.3 From bf53f463099016dddd12acfed6a025bb780cd504 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Aug 2020 10:57:52 +0200 Subject: ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/configs/integrator_defconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index a9755c501bec..b06e537d5149 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -1,13 +1,11 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set @@ -15,19 +13,17 @@ CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_INTEGRATOR_IMPD1=y CONFIG_ARCH_INTEGRATOR_CP=y -CONFIG_PCI=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y -CONFIG_CMA=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -37,6 +33,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set +CONFIG_PCI=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_AFS_PARTS=y @@ -52,9 +49,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y CONFIG_E100=y CONFIG_SMC91X=y +CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_SERIO_SERPORT is not set CONFIG_DRM=y +CONFIG_DRM_DISPLAY_CONNECTOR=y CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_PL111=y CONFIG_FB_MODE_HELPERS=y -- cgit v1.2.3 From 3b574ea2f89321d0a428286be0057340f0313323 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 17 Aug 2020 08:56:53 +0200 Subject: arm64: defconfig: Enable USB gadget with configfs USB OTG connections are pretty common for embedded and development boards, for example to have networking or serial access to the device. Build as a module the USB gadget configfs options so the defconfig can be used in such development configurations. Link: https://lore.kernel.org/r/20200817065654.4419-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index e0f33826819f..0b0b30efc0f5 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -724,6 +724,17 @@ CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m CONFIG_USB_TEGRA_XUDC=m +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_FS=y CONFIG_TYPEC=m CONFIG_TYPEC_TCPM=m CONFIG_TYPEC_FUSB302=m -- cgit v1.2.3 From 1ebda87ad906b732af5660c3ee2e896a13292545 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 17 Aug 2020 08:56:54 +0200 Subject: arm64: defconfig: Enable ptn5150 extcon driver Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C applications) present on some of i.MX8 evaluation boards (e.g. Variscite Symphony board). Link: https://lore.kernel.org/r/20200817065654.4419-2-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 0b0b30efc0f5..6d04b9577b0b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -925,6 +925,7 @@ CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_K3_AM6_SOC=y CONFIG_ARCH_K3_J721E_SOC=y CONFIG_TI_SCI_PM_DOMAINS=y +CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_IIO=y -- cgit v1.2.3 From 81dbbb417da4d1ac407dca5b434d39d5b6b91ef3 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Tue, 28 Jul 2020 12:50:06 +0200 Subject: ARM: dts: ls1021a: fix QuadSPI-memory reg range According to the Reference Manual, the correct size is 512 MiB. Without this fix, probing the QSPI fails: fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed fsl-quadspi: probe of 1550000.spi failed with error -12 Fixes: 85f8ee78ab72 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC") Signed-off-by: Matthias Schiffer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 069af9a19bb6..827373ef1a54 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -182,7 +182,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x1550000 0x0 0x10000>, - <0x0 0x40000000 0x0 0x40000000>; + <0x0 0x40000000 0x0 0x20000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = ; clock-names = "qspi_en", "qspi"; -- cgit v1.2.3 From deb6323b739c54e1a1e83cd3a2bae4901e3eebf6 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 3 Aug 2020 16:01:24 +0800 Subject: ARM: dts: imx7ulp: Correct gpio ranges Correct gpio ranges according to i.MX7ULP pinctrl driver: gpio_ptc: ONLY pin 0~19 are available; gpio_ptd: ONLY pin 0~11 are available; gpio_pte: ONLY pin 0~15 are available; gpio_ptf: ONLY pin 0~19 are available; Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7ulp.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 367439639da9..b7ea37ad4e55 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -394,7 +394,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLC>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 0 32>; + gpio-ranges = <&iomuxc1 0 0 20>; }; gpio_ptd: gpio@40af0000 { @@ -408,7 +408,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLD>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 32 32>; + gpio-ranges = <&iomuxc1 0 32 12>; }; gpio_pte: gpio@40b00000 { @@ -422,7 +422,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 64 32>; + gpio-ranges = <&iomuxc1 0 64 16>; }; gpio_ptf: gpio@40b10000 { @@ -436,7 +436,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLF>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 96 32>; + gpio-ranges = <&iomuxc1 0 96 20>; }; }; -- cgit v1.2.3 From 140a1dc5aea1648258bd9a5e6186331199212079 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 17 Aug 2020 15:01:42 -0300 Subject: ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6qdl-gw51xx.dtsi:23.12-68.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unneeded #address-cells/#size-cells properties to fix the issue. Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support") Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 7705285d9e3c..4d01c3300b97 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -22,8 +22,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; -- cgit v1.2.3 From ecc1aebe3436a3a97b42f7542f7b30a7a3cd1dc5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 17 Aug 2020 15:01:43 -0300 Subject: ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name The following dtc warning is seen when building with W=1: arch/arm/boot/dts/imx6q-prtwd2.dts:33.8-43.4: Warning (unit_address_vs_reg): /i2c@4: node has a unit name, but no reg or ranges property Remove the unneeded i2c unit name to fix the issue. Fixes: 88010b8174ab ("ARM: dts: add Protonic WD2 board") Signed-off-by: Fabio Estevam Reviewed-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-prtwd2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index dffafbcaa7af..349959d38020 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -30,7 +30,7 @@ }; /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */ - i2c@4 { + i2c { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; -- cgit v1.2.3 From 56e79dfd036b538940227fb31371c1cd67b2467f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 18 Aug 2020 14:25:31 -0600 Subject: arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build The imx8mm-beacon-kit.dtb was never added to dtbs-y and wasn't getting built. Fix it. Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Signed-off-by: Rob Herring Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index a39f0a1723e0..903c0eb61290 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb -- cgit v1.2.3 From c5e46066b23dbbb4228fbdc3de66a27ddc8b8a36 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 19 Aug 2020 14:59:44 -0500 Subject: ARM: dts: imx6q-logicpd: Fix broken PWM The DTC doesn't like the default PWM settings, because it's expecting three cells. This patch reduces adds the extra entry of 0 to the PWM reference. Fixes: fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files") Reviewed-by: Fabio Estevam Signed-off-by: Adam Ford Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-logicpd.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts index 7a3d1d3e54a9..8f94364ba484 100644 --- a/arch/arm/boot/dts/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -13,7 +13,7 @@ backlight: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm3 0 20000>; + pwms = <&pwm3 0 20000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_lcd>; -- cgit v1.2.3 From 2a6838d54128952ace6f0ca166dd8706abe46649 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Fri, 21 Aug 2020 14:21:02 -0700 Subject: ARM: dts: vfxxx: Add syscon compatible with OCOTP Add syscon compatibility with Vybrid OCOTP node. This is required to access the UID. Fixes: fa8d20c8dbb77 ("ARM: dts: vfxxx: Add node corresponding to OCOTP") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam Reviewed-by: Stefan Agner Signed-off-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 0fe03aa0367f..2259d11af721 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -495,7 +495,7 @@ }; ocotp: ocotp@400a5000 { - compatible = "fsl,vf610-ocotp"; + compatible = "fsl,vf610-ocotp", "syscon"; reg = <0x400a5000 0x1000>; clocks = <&clks VF610_CLK_OCOTP>; }; -- cgit v1.2.3 From 5cbb80d5236b47b149da292b86d5fc99a680894b Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Sat, 22 Aug 2020 19:25:05 -0700 Subject: ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on the imx7d-zii-rmu2 board. The end result is that network receive behaviour is marginal with lots of RX CRC errors experienced and NFS frequently failing. Quoting the explanation from Andrew Lunn in commit 0672d22a19244 ("ARM: dts: imx: Fix the AR803X phy-mode"): "The problem here is, all the DTs were broken since day 0. However, because the PHY driver was also broken, nobody noticed and it worked. Now that the PHY driver has been fixed, all the bugs in the DTs now become an issue" Fix it by switching to phy-mode = "rgmii-id". Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-zii-rmu2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts index e5e20b07f184..7cb6153fc650 100644 --- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -58,7 +58,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&fec1_phy>; status = "okay"; -- cgit v1.2.3 From 1f2f98f2703e8134678fe20982886085631eda23 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 29 Aug 2020 13:12:48 +0200 Subject: arm64: dts: imx8mq: Fix TMU interrupt property "interrupt" is not a valid property. Using proper name fixes dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property Fixes: e464fd2ba4d4 ("arm64: dts: imx8mq: enable the multi sensor TMU") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index f70435cf9ad5..561fa792fe5a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -423,7 +423,7 @@ tmu: tmu@30260000 { compatible = "fsl,imx8mq-tmu"; reg = <0x30260000 0x10000>; - interrupt = ; + interrupts = ; clocks = <&clk IMX8MQ_CLK_TMU_ROOT>; little-endian; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; -- cgit v1.2.3 From 66138621f2473e29625dfa6bb229872203b71b90 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Tue, 1 Sep 2020 18:21:49 +0800 Subject: arm64: dts: imx8mp: correct sdma1 clk setting Correct sdma1 ahb clk, otherwise wrong 1:1 clk ratio will be chosed so that sdma1 function broken. sdma1 should use 1:2 clk, while sdma2/3 use 1:1. Fixes: 6d9b8d20431f ("arm64: dts: freescale: Add i.MX8MP dtsi support") Cc: Signed-off-by: Robin Gong Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9de2aa1c573c..a5154f13a18e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -702,7 +702,7 @@ reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>, - <&clk IMX8MP_CLK_SDMA1_ROOT>; + <&clk IMX8MP_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; -- cgit v1.2.3 From 3ee99f6a2379eca87ab11122b7e9abd68f3441e2 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Thu, 3 Sep 2020 18:05:21 +0800 Subject: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX, correct the mux mode. Fixes: 743636f25f1d ("ARM: dts: imx: add pin function header for imx6sx") Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 0b02c7e60c17..f4dc46207954 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -1026,7 +1026,7 @@ #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 #define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 -- cgit v1.2.3 From d663186293a818af97c648624bee6c7a59e8218b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:43:41 -0700 Subject: ARM: dts: bcm: HR2: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-hr2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index cbebed5f050e..e8df458aad39 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -217,7 +217,7 @@ }; qspi: spi@27200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, <0x11c408 0x004>, -- cgit v1.2.3 From d1ecc40a954fd0f5e3789b91fa80f15e82284e39 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:44:25 -0700 Subject: ARM: dts: NSP: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 0346ea621f0f..c846fa3c244d 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -284,7 +284,7 @@ }; qspi: spi@27200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, <0x11c408 0x004>, -- cgit v1.2.3 From b793dab8d811e103665d6bddaaea1c25db3776eb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:45:29 -0700 Subject: ARM: dts: BCM5301X: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 2d9b4dd05830..0016720ce530 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -488,7 +488,7 @@ }; spi@18029200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x18029200 0x184>, <0x18029000 0x124>, <0x1811b408 0x004>, -- cgit v1.2.3 From 686e0a0c8c61e0e3f55321d0181fece3efd92777 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:49:19 -0700 Subject: arm64: dts: ns2: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2") Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 15f7b0ed3836..39802066232e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -745,7 +745,7 @@ }; qspi: spi@66470200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; reg = <0x66470200 0x184>, <0x66470000 0x124>, <0x67017408 0x004>, -- cgit v1.2.3