From 379e36d3f591cb62e781907edafea17d75e8c1fa Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 7 Sep 2018 10:18:51 +0200 Subject: ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl The drive strength has to be set to medium otherwise some data corruption may happen. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index b10dccd0958f..3b1baa8605a7 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include #include +#include / { model = "Atmel SAMA5D2 PTC EK"; @@ -299,6 +300,7 @@ , ; bias-pull-up; + atmel,drive-strength = ; }; ale_cle_rdy_cs { -- cgit v1.2.3 From 13b91ed77a65cf3bf23353880245d0cbd9138294 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sun, 16 Sep 2018 12:34:09 +0800 Subject: ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT The R40 HDMI PHY seems to be different to the A64 one, the A64 one has no input mux, but the R40 one has. Drop the A64 fallback compatible from the HDMI PHY node in R40 DT. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard [wens@csie.org: Fix subject prefix order] Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-r40.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index ffd9f00f74a4..5f547c161baf 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -800,8 +800,7 @@ }; hdmi_phy: hdmi-phy@1ef0000 { - compatible = "allwinner,sun8i-r40-hdmi-phy", - "allwinner,sun50i-a64-hdmi-phy"; + compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, <&ccu 7>, <&ccu 16>; -- cgit v1.2.3 From 3ab97942d0213b6583a5408630a8cbbfbf54730f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 19 Sep 2018 17:14:01 -0700 Subject: ARM: dts: BCM63xx: Fix incorrect interrupt specifiers A number of our interrupts were incorrectly specified, fix both the PPI and SPI interrupts to be correct. Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support") Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm63138.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 43ee992ccdcf..6df61518776f 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -106,21 +106,23 @@ global_timer: timer@1e200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; - interrupts = ; + interrupts = ; clocks = <&axi_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; - interrupts = ; + interrupts = ; clocks = <&axi_clk>; }; twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; - interrupts = ; + interrupts = ; }; armpll: armpll { @@ -158,7 +160,7 @@ serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -167,7 +169,7 @@ serial1: serial@620 { compatible = "brcm,bcm6345-uart"; reg = <0x620 0x1b>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -180,7 +182,7 @@ reg = <0x2000 0x600>, <0xf0 0x10>; reg-names = "nand", "nand-int-base"; status = "disabled"; - interrupts = ; + interrupts = ; interrupt-names = "nand"; }; -- cgit v1.2.3